Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nonlinear response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Simulating dielectric spectra: A demonstration of the direct electric field method and a new model for the nonlinear dielectric response

Here we demonstrate a method to compute the dielectric spectra of fluids in molecular dynamics (MD) by directly applying electric fields to the simulation. We obtain spectra from MD simulations with low magnitude electric fields (≈0.01 V/Å) in agreement with spectra from the fluctuation–dissipation method for water and acetonitrile. We examine this method’s trade-off between noise at low field magnitudes and the nonlinearity of the response at higher field magnitudes. We then apply the Booth equation to describe the nonlinear response of both fluids at low frequency (0.1 GHz) and high field magnitude (up to 0.5 V/Å). We develop a model of the frequency-dependent nonlinear response by combining the Booth description of the static nonlinear dielectric response of fluids with the frequency-dependent linear dielectric response of the Debye model. We find good agreement between our model and the MD simulations of the nonlinear dielectric response for both acetonitrile and water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear Acoustic Response of an Aircraft Fuselage Sidewall Structure by a Reduced-Order Analysis

A reduced-order nonlinear analysis of a structurally complex aircraft fuselage sidewall panel is undertaken to explore issues associated with application of such analyses to practical structures. Of primary interest is the trade-off between computational efficiency and accuracy. An approach to modal basis selection is offered based upon the modal participation in the linear regime. The nonlinear static response to a uniform pressure loading and nonlinear random response to a uniformly distributed acoustic loading are computed. Comparisons of the static response with a nonlinear static solution in physical degrees-of-freedom demonstrate the efficacy of the approach taken for modal basis selection. Changes in the modal participation as a function of static and random loading levels suggest a means for improvement in the basis selection.

Przekop, Adam↗

Nonlinear photorefractive response at high modulation depths

The response of photorefractive materials to sinusoidal intensity patterns of high modulation depths is considered. It is shown that the induced refractive-index response in this regime is highly nonlinear. Concise analytic expressions for the various nonlinear harmonics of the photorefractive response field are developed and compared with exact numerical solutions of the underlying charge-transport equations as well as with the results of previous theoretical models over a broad range of physical parameters. We show that the nonlinear response characteristics are strongly dependent on both the magnitude of applied electric fields and the relative concentrations of charge donor and acceptor sites in the material. For drift dominated recording, in particular, we determine analytically that in the limit of a minimal acceptor/donor ratio, the amplitudes of higher spatial harmonics of the response reach a maximum and eventually decay as functions of increasing applied field, whereas these amplitudes reach a nonzero limit in the case of a near-unity acceptor/donor ratio. Finally, we generalize our results to account for diffusion effects in an appended derivation.

Vachss, Frederick↗

Nonlinear transient responses of initially stressed composite plates

The nonlinear transient response of initially stressed composite plates is investigated using the finite element method. A nine-node isoparametric quadrilateral element is developed to model laminated plates under initial deformation and initial stress according to the Mindlin plate theory and von Karman large deflection assumptions. In the time integration, the Newmark constant acceleration method in conjunction with an efficient and accurate iteration scheme is used. Numerical results for deflections and bending moments for isotropic and laminated plates are obtained.

Chen, J. K.↗

Influence of unbalance on the nonlinear dynamical response and stability of flexible rotor-bearing systems

In this paper, some of the effects of unbalance on the nonlinear response and stability of flexible rotor-bearing systems is presented from both a theoretical and experimental standpoint. In a linear system, operating above its stability threshold, the amplitude of motion grows exponentially with time and the orbits become unbounded. In an actual system, this is not necessarily the case. The actual amplitudes of motion may be bounded due to various nonlinear effects in the system. These nonlinear effects cause limit cycles of motion. Nonlinear effects are inherent in fluid film bearings and seals. Other contributors to nonlinear effects are shafts, couplings and foundations. In addition to affecting the threshold of stability, the nonlinear effects can cause jump phenomena to occur at not only the critical speeds, but also at stability onset or restabilization speeds.

Gunter, E. J.↗

QuDPy: A Python-based tool for computing ultrafast non-linear optical responses

Nonlinear Optical Spectroscopy is a well-developed field with theoretical and experimental advances that have benefited multiple disciplines, including chemistry, biology, and physics. However, for the accurate interpretation of the corresponding multi-dimensional spectra, there is a need for precise quantum dynamical simulations based on model Hamiltonians. In this article, we present the initial release of our code, QuDPy (Quantum Dynamics in Python), which provides a robust numerical platform for performing quantum dynamics simulations based on model systems, including open quantum systems. Furthermore, a distinguishing feature of our approach is the ability to specify various high-order optical response pathways in the form of double-sided Feynman diagrams through a straightforward input syntax. This syntax outlines the time-ordering of ket-sided or bra-sided optical interactions acting on the time-evolving density matrix of the system. We utilize the quantum dynamics capabilities of QuTip to simulate the spectral response of complex systems, allowing us to compute virtually any $n$-th order optical response of the model system. To illustrate the utility of our approach, we provide a series of example calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Triggering of longitudinal combustion instabilities in solid rocket motors: Nonlinear combustion response

Pulsed oscillations in solid rocket motors are investigated with emphasis on nonlinear combustion response. The study employs a wave equation governing the unsteady motions in a two-phase flow, and a solution technique based on spatial- and time-averaging. A wide class of combustion response functions is studied to second-order in fluctuation amplitude to determine if, when, and how triggered instabilities arise. Conditions for triggering are derived from analysis of limit cycles, and regions of triggering are found in parametric space. Based on the behavior of model dynamical systems, introduction of linear cross-coupling and quadratic self-coupling among the acoustic modes appears to be the manner in which the nonlinear combustion response produces triggering to a stable limit cycle. Regions of initial conditions corresponding to stable pulses were found, suggesting that stability depends on initial phase angle and harmonic content, as well as the composite amplitude, of the pulse.

Wicker, J. M.↗

Polarity-dependence of the nonlinear dielectric response in interfacial water

Molecular dynamics simulations are used to study the nonlinear dielectric responses of a confined aqueous film in a planar nanopore under perpendicular electric fields at varied voltages between confining graphene sheets. Dielectric saturation reminiscent of the bulk phase behavior is prevalent at very strong fields, whereas we observe a nonmonotonic permittivity dependence on the electric field at intermediate strengths where field-alignment and spontaneous polarization of interfacial water are of comparable magnitude. The coupling between the two effects results in distinct dielectric responses at opposite confinement walls. The normal component of both the differential dielectric constant and dielectric difference constant tensors averaged over the region closer to the wall under an incoming electric field (field pointing from the liquid to the solid phase) initially increases with the strength of the imposed field. The differential permittivity peaks at a field strength previously shown to offset the surface-induced orientation bias of hydration molecules at this wall. Further strengthening of the field results in a conventional saturation behavior. At the opposite wall (subject to outgoing field) and in the central region of the water slab, the nonlinear dielectric response resembles bulklike saturation. The conditions at the permittivity extremum coincide with the window of accelerated reorientation rates of interfacial water molecules under an incoming field we uncovered in earlier molecular dynamics analyses.

Chemistry↗

Nonlinear random response prediction using MSC/NASTRAN

An equivalent linearization technique was incorporated into MSC/NASTRAN to predict the nonlinear random response of structures by means of Direct Matrix Abstract Programming (DMAP) modifications and inclusion of the nonlinear differential stiffness module inside the iteration loop. An iterative process was used to determine the rms displacements. Numerical results obtained for validation on simple plates and beams are in good agreement with existing solutions in both the linear and linearized regions. The versatility of the implementation will enable the analyst to determine the nonlinear random responses for complex structures under combined loads. The thermo-acoustic response of a hexagonal thermal protection system panel is used to highlight some of the features of the program.

Robinson, J. H.↗

Observation of cupratelike nonlinear terahertz responses in superconducting infinite-layer nickelates via two-dimensional coherent spectroscopy

The 𝑑-wave pairing symmetry in newly discovered infinite-layer nickelates remains highly debated compared to the widely accepted 𝑑-wave superconductivity in cuprates, despite recent intense efforts using equilibrium optical and electrical transport measurements. A complementary approach involves characterizing THz coherent nonlinear responses, which is currently lacking but needed, as it would offer new insights into the superconducting gap structure by characterizing Higgs modes and quasiparticle excitations. Here, in this study, we report THz 2D coherent spectroscopy (THz-2DCS) responses from the superconducting state in an infinite-layer nickelate. The 2D spectra clearly demonstrate the absence of hallmark signatures of 𝑠-wave pairing symmetry, such as resonant 2⁢Δ peaks at superconducting gaps. Instead, we observe gapless 2D spectra in the nickelate, centered around the THz driving frequency, with no noticeable shift as the temperature increases. These findings closely resemble the nodal superconductivity behavior expected in cuprates. Together with our simulations, these findings suggest that 2⁢Δ signatures in the 2D spectra of 𝑑-wave gap structures can be obscured by significant nodal quasiparticle excitations at arbitrarily low energies. This contrasts with the long-lived Higgs modes, observed as distinct 2⁢Δ peaks in a controlled THz-2DCS experiment on niobium, a representative example of dirty-limit s-wave superconductors. Our results have implications for understanding the unconventional superconductivity in nickelates and highlight the need to explore their coherent nonlinear dynamics.

Pairing mechanisms↗

The nonlinear viscoelastic response of resin matrix composite laminates

Possible treatments of the nonlinear viscoelastic behavior of materials are reviewed. A thermodynamic based approach, developed by Schapery, is discussed and used to interpret the nonlinear viscoelastic response of a graphite epoxy laminate, T300/934. Test data to verify the analysis for Fiberite 934 neat resin as well as transverse and shear properties of the unidirectional T300/934 composited are presented. Long time creep characteristics as a function of stress level and temperature are generated. Favorable comparisons between the traditional, graphical, and the current analytical approaches are shown. A free energy based rupture criterion is proposed as a way to estimate the life that remains in a structure at any time.

Hiel, C.↗

Nonlinear dynamic response of a uni-directional model for the tile/pad space shuttle thermal protection system

A unidirectional analysis of the nonlinear dynamic behavior of the space shuttle tile/pad thermal protection system is developed and examined for imposed sinusoidal and random motions of the shuttle skin and/or applied tile pressure. The analysis accounts for the highly nonlinear stiffening hysteresis and viscous behavior of the pad which joins the tile to the shuttle skin. Where available, experimental data are used to confirm the validity of the analysis. Both analytical and experimental studies reveal that the system resonant frequency is very high for low amplitude oscillations but decreases rapidly to a minimum value with increasing amplitude. Analytical studies indicate that with still higher amplitude the resonant frequency increases slowly. The nonlinear pad is also responsible for the analytically and experimentally observed distorted response wave shapes having high sharp peaks when the system is subject to sinusoidal loads. Furthermore, energy dissipation in the pad is studied analytically and it is found that the energy dissipated is sufficiently high to cause rapid decay of dynamic transients. Nevertheless, the sharp peaked nonlinear responses of the system lead to higher magnification factors than would be expected in such a highly damped linear system.

Housner, J. M.↗

Volterra Series Approach for Nonlinear Aeroelastic Response of 2-D Lifting Surfaces

The problem of the determination of the subcritical aeroelastic response and flutter instability of nonlinear two-dimensional lifting surfaces in an incompressible flow-field via Volterra series approach is addressed. The related aeroelastic governing equations are based upon the inclusion of structural nonlinearities, of the linear unsteady aerodynamics and consideration of an arbitrary time-dependent external pressure pulse. Unsteady aeroelastic nonlinear kernels are determined, and based on these, frequency and time histories of the subcritical aeroelastic response are obtained, and in this context the influence of geometric nonlinearities is emphasized. Conclusions and results displaying the implications of the considered effects are supplied.

Silva, Walter A.↗

Nonlinear dynamic response of wind turbine rotors

The nonlinear equations of motion for a rigid rotor restrained by three flexible springs representing the flapping, lagging and feathering motions are derived using Lagrange's equations for arbitrary angular rotations. These are reduced to a consistent set of nonlinear equations using nonlinear terms up to third order.

Chopra, I.↗

Reduced basis technique for calculating sensitivity coefficients of nonlinear structural response

An efficient reduced basis technique is presented for calculating the sensitivity of nonlinear structural response to variations in the design variables. The structure is discretized by using two-field mixed finite element models. The vector of structural response and its sensitivity coefficients (derivatives with respect to design variables) are each expressed as a linear combination of a small number of basis (or global approximation) vectors. The Bubnov-Galerkin technique is then used to approximate each of the finite element equations governing the response and the sensitivity coefficients by a small number of algebraic equations in the amplitudes of these vectors. The path derivatives (derivatives of the response vector with respect to path parameters, e.g., load parameters) are used as basis vectors for approximating the response. A combination of the path derivatives and their derivatives with respect to the design variables is used for approximating the sensitivity coefficients. The potential of the proposed technique is discussed and its effectiveness is demonstrated by means of numerical examples of laminated composite plates subjected to mechanical and thermal loads.

Noor, Ahmed K.↗

Alternative Modal Basis Selection Procedures for Nonlinear Random Response Simulation

Three procedures to guide selection of an efficient modal basis in a nonlinear random response analysis are examined. One method is based only on proper orthogonal decomposition, while the other two additionally involve smooth orthogonal decomposition. Acoustic random response problems are employed to assess the performance of the three modal basis selection approaches. A thermally post-buckled beam exhibiting snap-through behavior, a shallowly curved arch in the auto-parametric response regime and a plate structure are used as numerical test articles. The results of the three reduced-order analyses are compared with the results of the computationally taxing simulation in the physical degrees of freedom. For the cases considered, all three methods are shown to produce modal bases resulting in accurate and computationally efficient reduced-order nonlinear simulations.

Przekop, Adam↗