Crystallization of nanoparticles induced by precipitation of trace polymeric additives
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Engineering Papers
Results for “multiple crystal forms”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Negative refraction in hyperbolic hetero-bicrystals
We visualized negative refraction of phonon polaritons, which occurs at the interface between two natural crystals. The polaritons—hybrids of infrared photons and lattice vibrations—form collimated rays that display negative refraction when passing through a planar interface between the two hyperbolic van der Waals materials: molybdenum oxide (MoO 3 ) and isotopically pure hexagonal boron nitride (h 11 BN). At a special frequency ω 0 , these rays can circulate along closed diamond-shaped trajectories. We have shown that polariton eigenmodes display regions of both positive and negative dispersion interrupted by multiple gaps that result from polaritonic-level repulsion and strong coupling.
Science & Technology - Other Topics↗
Chemical randomness, lattice distortion and the wide distributions in the atomic level properties in high entropy alloys
High entropy alloys (HEAs) consist of multiple elements present in large proportions that are randomly distributed on a crystal lattice. On the one hand, the presence of multiple elements engenders wide ranges of atomic radii, electronegativities, electron valences and magnetic moments, whereas on the other, the presence of chemical randomness creates unique nearest neighbor environments among the lattice sites. As a result, the symmetry of the energy landscape is broken essentially at each lattice site thereby resulting in highly distorted energy landscapes. At the atomistic level, the lattice distortion has been widely observed in the form of varying bond lengths. At the electronic level, a range of charge transfers result in the charge density distortion. Collectively, the distorted landscapes cause large quantitative variations of the atomic level properties; in this review, we highlight the effect of lattice distortion on point defect energetics, stacking fault energies, and dislocation mobility. Besides the well- known large HEAs phase space, the enormity of the distorted energy landscape that scales with the atomic configurations is a new consideration; understanding this coupling between composition, lattice distortion and properties’ variations thus becomes an exciting but challenging area within the field of HEAs. Furthermore, this coupling is expected to open a new door for materials design, where the materials properties could be tuned via leveraging the lattice distortion, which is essentially absent in dilute/ordered alloys.
36 MATERIALS SCIENCE↗
Space-tiled colloidal crystals from DNA-forced shape-complementary polyhedra pairing
Generating space-filling arrangements of most discrete polyhedra nanostructures of the same shape is not possible. However, if the appropriate individual building blocks are selected (e.g., cubes), or multiple shapes of the appropriate dimensions are matched (e.g., octahedra and tetrahedra) and their pairing interactions are subsequently forced, space-filled architectures may be possible. With flexible molecular ligands (polyethylene glycol–modified DNA), the shape of a polyhedral nanoparticle can be deliberately altered and used to realize geometries that favor space tessellation. In this work, 10 new colloidal crystals were synthesized from DNA-modified nanocrystal building blocks that differed in shapes and sizes, designed to form space-filling architectures with micron-scale dimensions. The insights and capabilities provided by this new strategy substantially expand the scope of colloidal crystals possible and provide an expanded tool kit for researchers interested in designing metamaterials.
Science & Technology - Other Topics↗
Hematite Crystallization from a Two-Line Ferrihydrite Suspension
Rational design and synthesis of materials, determination of environmental conditions at the time of mineral formation, and definition of mechanisms in biomineralizing systems all require an understanding of the effect of multiple factors on modulating crystallization pathways. In this study, we investigate the influence of temperature, oxalate additive, aging time, and addition of seed crystals on hematite (α-Fe 2 O 3 , Hm) crystallization from a two-line ferrihydrite (Fe 2 O 3 ·xH 2 O, Fh) suspension. We also investigate the effect of temperature on the aging of spindle-shaped Hm mesocrystals, which we synthesize through the addition of sodium oxalate. The results show that Hm mesocrystals form in a temperature window of 45 °C-130 °C. Temperatures ≥ 140 °C favor formation of rhombohedral Hm, suggesting classical monomer-by-monomer growth dominates, whereas crystallization by particle attachment (CPA) is dominant between 45 and 90 °C, while the two processes compete in the intermediate temperature range. Aging of mesocrystals in the original solution at 90 °C or 180 °C leads to a slow morphological evolution towards rhombohedral crystals due to Ostwald ripening. Then, by utilizing rhombohedral Hm and rod-shaped goethite as substrates on which to assemble the mesocrystals, we demonstrate formation of complex heterogeneous structures.
36 MATERIALS SCIENCE↗
Sample changers for direct geometry neutron chopper spectrometers
The advent of higher flux neutron sources has made the use of sample changers appropriate across the instrument suites at neutron scattering facilities. We examine the efficiency, design, and operation of two sample changers used at the thermal chopper spectrometers at the Spallation Neutron Source. We also present case studies of sample holders designed to accommodate multiple single crystal or powder samples for the Cold Neutron Chopper Spectrometer at the Spallation Neutron Source. [This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan).]
Stone, Matthew B. [Oak Ridge National Laboratory (↗
Structural insights into binding of polyglutamylated tetrahydrofolate by serine hydroxymethyltransferase 8 from soybean
Tetrahydrofolate and its derivatives participate in one-carbon transfer reactions in all organisms. The cellular form of tetrahydrofolate (THF) is modified by multiple glutamate residues and polyglutamylation plays a key role in organellar and cellular folate homeostasis. In addition, polyglutamylation of THF is known to increase the binding affinity to enzymes in the folate cycle, many of which can utilize polyglutamylated THF as a substrate. Here, we use X-ray crystallography to provide a high-resolution view of interactions between the enzyme serine hydroxymethyltransferase (SHMT), which provides one carbon precursors for the folate cycle, and a polyglutamylated form of THF. Our 1.7 Å crystal structure of soybean SHMT8 in complex with diglutamylated 5-formyl-THF reveals, for the first time, a structural rearrangement of a loop at the entrance to the folate binding site accompanied by the formation of novel specific interactions between the enzyme and the diglutamyl tail of the ligand. Biochemical assays show that additional glutamate moieties on the folate ligand increase both enzyme stability and binding affinity. Together these studies provide new information on SHMT structure and function and inform the design of anti-folate agents.
59 BASIC BIOLOGICAL SCIENCES↗
Multibeam Electron Diffraction
One of the primary uses for transmission electron microscopy (TEM) is to measure diffraction pattern images in order to determine a crystal structure and orientation. In nanobeam electron diffraction (NBED), we scan a moderately converged electron probe over the sample to acquire thousands or even millions of sequential diffraction images, a technique that is especially appropriate for polycrystalline samples. However, due to the large Ewald sphere of TEM, excitation of Bragg peaks can be extremely sensitive to sample tilt, varying strongly for even a few degrees of sample tilt for crystalline samples. In this paper, we present multibeam electron diffraction (MBED), where multiple probe-forming apertures are used to create multiple scanning transmission electron microscopy (STEM) probes, all of which interact with the sample simultaneously. We detail designs for MBED experiments, and a method for using a focused ion beam to produce MBED apertures. We show the efficacy of the MBED technique for crystalline orientation mapping using both simulations and proof-of-principle experiments. We also show how the angular information in MBED can be used to perform 3D tomographic reconstruction of samples without needing to tilt or scan the sample multiple times. Finally, we also discuss future opportunities for the MBED method.
47 OTHER INSTRUMENTATION↗
Multiplication of freestanding III-V semiconductor membranes from a single wafer by alternating growth with amorphous graphene interlayer
Freestanding single-crystalline III-V compound semiconductors are important building blocks for functional devices due to their high electron mobilities, a wide range of bandgaps, and excellent optoelectronic properties. Despite efforts to produce such membranes by detaching epitaxial layers from donor wafers, current methods suffer from either slow processes or poor material quality. Here, we demonstrate a technique to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, a process to directly grow amorphous graphene on III-V substrates in metal-organic chemical vapor deposition reactors is developed, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of amorphous graphene and III-V epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because amorphous graphene provides a weak van der Waals interface that allows peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.
Han, Ne Myo↗
Multiplication of freestanding III-V semiconductor membranes from a single wafer by alternating growth with amorphous graphene interlayer
Freestanding single-crystalline III-V compound semiconductors are important building blocks for functional devices due to their high electron mobilities, a wide range of bandgaps, and excellent optoelectronic properties. Despite efforts to produce such membranes by detaching epitaxial layers from donor wafers, current methods suffer from either slow processes or poor material quality. Here, we demonstrate a technique to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, a process to directly grow amorphous graphene on III-V substrates in metal-organic chemical vapor deposition reactors is developed, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of amorphous graphene and III-V epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because amorphous graphene provides a weak van der Waals interface that allows peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.
Han, Ne Myo↗
Nematic Colloidal Micro‐Robots as Physically Intelligent Systems
Abstract Physically intelligent micro‐robotic systems exploit information embedded in micro‐robots, their colloidal cargo, and their milieu to interact, assemble, and form functional structures. Nonlinear anisotropic fluids such as nematic liquid crystals (NLCs) provide untapped opportunities to embed interactions via their topological defects, complex elastic responses, and ability to dramatically restructure in dynamic settings. Here a four‐armed ferromagnetic micro‐robot is designed and fabricated to embed and dynamically reconfigure information in the nematic director field, generating a suite of physical interactions for cargo manipulation. The micro‐robot shape and surface chemistry are designed to generate a nemato‐elastic energy landscape in the domain that defines multiple modes of emergent, bottom‐up interactions with passive colloids. Micro‐robot rotation expands the ability to sculpt interactions; the energy landscape around a rotating micro‐robot is dynamically reconfigured by complex far‐from‐equilibrium dynamics of the micro‐robot's companion topological defect. These defect dynamics allow transient information to be programmed into the domain and exploited. Robust micro‐robotic manipulation strategies are demonstrated that exploit these diverse modes of nemato‐elastic interaction to achieve cargo docking, transport, release, and assembly of complex reconfigurable structures at multi‐stable sites. Such structures are of great interest to future developments of LC‐based advanced optical device and micro‐manufacturing in anisotropic environments.
Yao, Tianyi↗
Mechanical Actuation via Homeomorphic Transformations of Topological Solitons within Polymer Coatings
Abstract Topological solitons are currently under investigation for their exotic properties, especially in nonlinear physics, optics, and material sciences. However, challenges of robust generation and limited stability over time have hindered their practical uses. To address this issue, an approach is developed to form structured arrays of solitons in films of polymerizable liquid crystals. Their complex molecular architecture is preserved by in situ photopolymerization forming a stable liquid crystal network. Most excitingly, their properties are advanced to include responsiveness functions. When thermally actuated, these topological solitons mediate the reconfiguration of surface topographies. Complex shape changes occur depending on the intrinsic complex spatial distribution of the director, which may even lead to full shape inversion and topographical changes as high as ≈40% of the initial thickness. Conversely, the shape changes provide information on the initial director profile, which is consistent with the mathematical model. The soliton‐containing polymer coatings are applicable in multiple domains, ranging from tunable optics to haptics, and from shape‐coupled sensing systems to temperature‐coupled heat management.
36 MATERIALS SCIENCE↗
Multi‐Stage Optimization of Pore Size and Shape in Pore‐Space‐Partitioned Metal–Organic Frameworks for Highly Selective and Sensitive Benzene Capture
Abstract Compared to exploratory development of new structure types, pushing the limits of isoreticular synthesis on a high‐performance MOF platform may have higher probability of achieving targeted properties. Multi‐modular MOF platforms could offer even more opportunities by expanding the scope of isoreticular chemistry. However, navigating isoreticular chemistry towards best properties on a multi‐modular platform is challenging due to multiple interconnected pathways. Here on the multi‐modular pacs (partitioned acs) platform, we demonstrate accessibility to a new regime of pore geometry using two independently adjustable modules (framework‐forming module 1 and pore‐partitioning module 2). A series of new pacs materials have been made. Benzene/cyclohexane selectivity is tuned, progressively, from 4.5 to 15.6 to 195.4 and to 482.5 by pushing the boundary of the pacs platform towards the smallest modules known so far. The exceptional stability of these materials in retaining both porosity and single crystallinity enables single‐crystal diffraction studies of different crystal forms (as‐synthesized, activated, guest‐loaded) that help reveal the mechanistic aspects of adsorption in pacs materials.
Chen, Yichong↗
Examining deformation localization of irradiated tungsten under uniaxial compression with crystal plasticity
In this work, the deformation behavior of irradiated tungsten at elevated service temperatures is examined using mechanism-based crystal plasticity finite element framework by considering multiple mechanisms, including thermal softening and irradiation hardening. The previously developed mechanism-based crystal plasticity model is first utilized to assess the yield stress of unirradiated and irradiated tungsten upon low-temperature irradiation. Additionally, the engineering stress-strain response under uniaxial compression is then predicted by considering the effect of irradiation-induced defect clusters on the motion of deformation-induced dislocations, and the predicted results agree well with the experimental measurements. More importantly, the formation and evolution of plastic strain localization zones in the form of shear bands are qualitatively captured, and the maximal principal strain distribution is quantitatively linked to the dose of irradiation damage. Finally, the deformation-induced shear band as a result of plastic instability in the compressed tungsten specimen is discussed.
36 MATERIALS SCIENCE↗
Multi–Stage Optimization of Pore Size and Shape in Pore–Space–Partitioned Metal–Organic Frameworks for Highly Selective and Sensitive Benzene Capture
Compared to exploratory development of new structure types, pushing the limits of isoreticular synthesis on a high-performance MOF platform may have higher probability of achieving targeted properties. Multi-modular MOF platforms could offer even more opportunities by expanding the scope of isoreticular chemistry. However, navigating isoreticular chemistry towards best properties on a multi-modular platform is challenging due to multiple interconnected pathways. Here on the multi-modular pacs (partitioned acs) platform, we demonstrate accessibility to a new regime of pore geometry using two independently adjustable modules (framework-forming module 1 and pore-partitioning module 2). A series of new pacs materials have been made. Benzene/cyclohexane selectivity is tuned, progressively, from 4.5 to 15.6 to 195.4 and to 482.5 by pushing the boundary of the pacs platform towards the smallest modules known so far. The exceptional stability of these materials in retaining both porosity and single crystallinity enables single-crystal diffraction studies of different crystal forms (as-synthesized, activated, guest-loaded) that help reveal the mechanistic aspects of adsorption in pacs materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Formation of distinctive nanostructured metastable polymorphs mediated by kinetic transition pathways in germanium
High-pressure β -Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression. However, the mechanism and transition kinetics remain poorly understood. Here, we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β -Sn Ge under rapid decompression at different rates. High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures: an almost perfect st12 Ge crystal, nanosized bc8/r8 structures with amorphous boundaries, and amorphous Ge with nanosized clusters (0.8–2.5 nm). Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate, temperature, and stress. This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.
36 MATERIALS SCIENCE↗
The structure and migration of twin boundaries in tetragonal β -Sn: An application of machine learning based interatomic potentials
Although atomistic simulations have contributed significantly to our understanding of twin boundary structure and migration in metals and alloys with hexagonal close packed (HCP) crystal structures, few direct atomistic studies of twinning have been conducted for other types of low symmetry materials, in large part due to a lack of reliable interatomic potentials. In this work, we examine twin boundary structure and migration in a tetragonal material, β-Sn, comparing high resolution Transmission Electron Microscopy (TEM) images of deformation twins in β-Sn to the results of direct atomistic simulations using multiple interatomic potentials. ML-based potentials developed in this work are found to give results consistent with our experimental data, revealing faceted twin boundary structures formed by the nucleation and motion of twinning disconnections. We use bicrystallographic methods in combination with atomistic simulations to analyze the structure, energy and shear coupled migration of observed twin facets in β-Sn. In analogy to Prismatic-Basal (PB/BP) interfaces in HCP metals, we discover low energy asymmetric Prismatic-A-plane (PA/AP) interfaces important to twin growth in β-Sn. Finally, a Moment Tensor Potential (MTP) and Rapid Artificial Neural Network (RANN) interatomic potential suitable for studying twinning and phase transformations in Sn are made publicly available as part of this work.
36 MATERIALS SCIENCE↗
Lightwave-electronic harmonic frequency mixing
Electronic frequency mixers are fundamental building blocks of electronic systems. Harmonic frequency mixing in particular enables broadband electromagnetic signal analysis across octaves of spectrum using a single local oscillator. However, conventional harmonic frequency mixers do not operate beyond hundreds of gigahertz to a few terahertz. If extended to the petahertz scale in a compact and scalable form, harmonic mixers would enable field-resolved optical signal analysis spanning octaves of spectra in a monolithic device without the need for frequency conversion using nonlinear crystals. Here, we demonstrate lightwave-electronic harmonic frequency mixing beyond 0.350 PHz using plasmonic nanoantennas. We demonstrate that the mixing process enables complete, field-resolved detection of spectral content far outside that of the local oscillator, greatly extending the range of detectable frequencies compared to conventional heterodyning techniques. Our work has important implications for applications where optical signals of interest exhibit coherent femtosecond-scale dynamics spanning multiple harmonics.
Science & Technology - Other Topics↗