Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multilayers.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

All-Polyester Multilayer Plastics (‘All-Polyester MLPs’): A Redesign for Inherently Recyclable Plastics

Multilayer plastics (MLPs) are widely used in modern packaging because they combine multiple functions such as oxygen and moisture barriers, mechanical strength, puncture resistance, and heat sealability into lightweight and cost-effective packaging solutions. These attributes are essential for food, beverage, pharmaceutical, and consumer goods packaging. However, conventional commercial MLPs typically consist of five to twelve layers made from chemically incompatible materials, including polyolefins, polyethylene terephthalate, nylon, ethylene-vinyl alcohol (EVOH), adhesives, and tie layers. This complexity makes MLPs extremely difficult to recycle. As a result, the vast majority of multilayer plastics (MLPs) are disposed of through landfilling or incineration. This disposal pathway perpetuates demand for virgin material production, thereby driving high industrial energy consumption, increasing greenhouse gas (GHG) emissions, and contributing to the long-term accumulation of plastic waste. The scope of work included: (1) Design and fabrication of all-polyester multilayer structures using commercially relevant processing methods; (2) Experimental validation of barrier, mechanical, and sealing performance; (3) Demonstration of both mechanical and chemical recycling pathways; and (4) Comprehensive techno-economic analysis (TEA) and life-cycle assessment (LCA) to quantify cost, energy, and environmental impacts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Bifacial Multilayer Graphene Float Transfer

A method for graphene transfer which is referred to as “bifacial transfer” that allows transfer of multilayer chemical vapor deposition (CVD) graphene from both sides of a native metal substrate, such as an as-received nickel catalyst, is presented. In traditional transfer methods, the graphene on the “non-preferred” side, that is, the bottom of the substrate, is removed with oxygen plasma before removal of the metal catalyst in etchant solution. Although this treatment prevents undesired aggregation of the graphene films, it fails to utilize both sides of CVD-grown graphene. The bifacial transfer method reduces the cost of multilayer graphene by allowing the transfer of graphene from both sides of the substrate. The quality of graphene transferred from both sides onto target glass and polymer substrates is compared. The results of optical microscopy, confocal Raman spectroscopy, atomic force microscopy, and electronic transport measurements suggest that the quality of the multilayer graphene on the “non-preferred” side does not differ significantly from that of the “preferred” side. Overall, this method will allow more efficient and cost-effective use of graphene by doubling the usable graphene per area of growth substrate, and by eliminating the need for intermediate sacrificial transfer substrates such as poly(methyl methacrylate).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Hydrogen Storage in Partially Exfoliated Magnesium Diboride Multilayers

Metal boride nanostructures have shown significant promise for hydrogen storage applications. However, the synthesis of nanoscale metal boride particles is challenging because of their high surface energy, strong inter- and intraplanar bonding, and difficult-to-control surface termination. Here, it is demonstrated that mechanochemical exfoliation of magnesium diboride in zirconia produces 3-4 nm ultrathin MgB 2 nanosheets (multilayers) in high yield. High-pressure hydrogenation of these multilayers at 70 MPa and 330 °C followed by dehydrogenation at 390 °C reveals a hydrogen capacity of 5.1 wt%, which is ≈50 times larger than the capacity of bulk MgB 2 under the same conditions. This enhancement is attributed to the creation of defective sites by ball-milling and incomplete Mg surface coverage in MgB 2 multilayers, which disrupts the stable boron-boron ring structure. The density functional theory calculations indicate that the balance of Mg on the MgB 2 nanosheet surface changes as the material hydrogenates, as it is energetically favorable to trade a small number of Mg vacancies in Mg(BH 4 ) 2 for greater Mg coverage on the MgB 2 surface. To conclude, the exfoliation and creation of ultrathin layers is a promising new direction for 2D metal boride/borohydride research with the potential to achieve high-capacity reversible hydrogen storage at more moderate pressures and temperatures.

08 HYDROGEN↗
DOE OSTI2026

Heterogeneous Multilayer Nanopores via Chemically Tuned Dielectric Breakdown for Single‐Molecule Sensing

Solid-state nanopores are powerful platforms for single-molecule sensing, yet their performance is often constrained by fabrication complexity, noise, and limited control over surface properties. Here we report a direct method to fabricate heterogeneous multilayer nanopores using chemically tuned controlled dielectric breakdown (CT-CDB). We integrate hBN, MoS 2 , or graphene atop a silicon nitride membrane to form five distinct bilayer and tri-layer architectures, with bare SiN x nanopore as a control. CT-CDB achieves pore formation reproducibly through material-stacks with high efficiency, good pore size control, and strong yield, validated by various characterizations. Transferrin protein translocation experiments, supported by simulations, reveal that multilayer configurations modulate protein conformations, ionic current blockade and dwell time distributions, reflecting combined effects of membrane type, interfacial chemistry, and local electric field gradients. A supervised machine learning framework is implemented to assist identifying multilayer structure effects embedded in signal signatures, with over 96% accuracy. This work presents a modular and scalable framework for functional nanopore engineering with complex structural integration, thereby expanding the potential of 2D materials in single-molecule sensing applications.

2D materials↗
DOE OSTI2022

Effect of substrate temperature on the growth of Nb 3 Sn film on Nb by multilayer sputtering

Here, we report on the fabrication of niobium tin (Nb 3 Sn) films by multilayer sequential sputtering on niobium at substrate temperatures ranging from room temperature to 250 °C. The multilayers were then annealed inside a separate vacuum furnace at 950 °C for 3 h. The material properties of the films were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, atomic force microscopy, and transmission electron microscopy. The superconducting properties of the films were studied by four-point probe resistivity measurements from room temperature to below the superconducting critical temperature T c . The highest film T c was 17.76 K, obtained when the multilayers were deposited at room temperature. When the deposition temperature was raised to 250 °C, a significant reduction in voids was achieved while the film's T c was 17.58 K.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Design and Characterization of Hybrid Multilayer Structures: Layer-by-Layer Growth of Polymer and Graphene Oxide Assemblies and Their Utility in Fuel Cell Applications

We report the layer-by-layer growth of poly- (ethylenimine) (PEI) that has been modified with sulfamate functionalities (S-PEI) using Zr 4+ -complexation interlayer linking chemistry. We have also deposited adlayers of graphene oxide (GO) that have been modified to possess sulfate functionalities (SGO), onto the S-PEI layers. The multilayer assemblies are formed with sulfamate/sulfate and sulfate/sulfate (S-PEI + S-GO) interlayer linking chemistry. In all cases the adlayer thickness is consistent with predictions based on van der Waals volume and/or molecular mechanics calculations. X-ray photoelectron spectroscopy (XPS) is used to characterize the Zr/S stoichiometry in the multilayer assembly. The utility of these hybrid multilayer structures is demonstrated in a Proton Exchange Membrane (PEM) fuel cell, where they are shown to reduce H 2 gas crossover by 15% with only a 12 nm thick layer.

fuel cell↗
DOE OSTI2025

UV-Enabled Defect Engineering in Multilayer GaSe and InSe and UV Writing of the Grating Pattern

III–VI post-transition-metal chalcogenides are layered semiconductor materials that exhibit direct band gaps in multilayers. Defect engineering is essential in 2D layered semiconductors for functional devices. Here, in this work, we report defect engineering in multilayer gallium selenide (GaSe) and indium selenide (InSe), where defects generated by ultraviolet (UV, 325 nm) laser irradiation result in an additional photoluminescence (PL) line. The additional PL line is due to defect-bound excitons. Characteristics of the defect emission are similar in GaSe and InSe samples subjected to UV irradiation, air annealing, and hydrostatic pressure. Two-beam UV interference was applied to create grating patterns with a periodic array of low and high densities of defects in GaSe. Density functional theory has identified the defect type in GaSe. The results provide valuable insights into defect generation and UV scribing of photonic circuits in 2D Se-based multilayers for optical integration in a 2D platform.

2D multilayered materials↗
DOE OSTI2022

Multilayered Ordered Protein Arrays Self-Assembled from a Mixed Population of Virus-like Particles

Biology shows many examples of spatially controlled assembly of cells and biomacromolecules into hierarchically organized structures, to which many of the complex biological functions are attributed. While such biological structures have inspired the design of synthetic materials, it is still a great challenge to control the spatial arrangement of individual building blocks when assembling multiple types of components into bulk materials. Here, in this study, we report self-assembly of multilayered, ordered protein arrays from mixed populations of virus-like particles (VLPs). We systematically tuned the magnitude of the surface charge of the VLPs via mutagenesis to prepare four different types of VLPs for mixing. A mixture of up to four types of VLPs selectively assembled into higher-order structures in the presence of oppositely charged dendrimers during a gradual lowering of the ionic strength of the solution. The assembly resulted in the formation of three-dimensional ordered VLP arrays with up to four distinct layers including a central core, with each layer comprising a single type of VLP. A coarse-grained computational model was developed and simulated using molecular dynamics to probe the formation of the multilayered, core-shell structure. Our findings establish a simple and versatile bottom-up strategy to synthesize multilayered, ordered materials by controlling the spatial arrangement of multiple types of nanoscale building blocks in a one-pot fabrication.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Interfaces enhanced plasma irradiation resistance in CrMoTaWV/W multilayer films through blocking He diffusion

The performance of plasma-facing materials (PFMs) is one of the key factors that significantly impact the stability of operation in fusion reactors. Herein, a new CrMoTaWV/W (high entropy alloy (HEA)/W) multilayer structure is designed as PFM to investigate its resistance to He plasma irradiation. It was observed that the introduction of the interfaces effectively absorbed plenty of He atoms, preventing them from diffusing into the material and delaying the formation of fuzz incubation zone, therefore, enhancing the resistance to plasma irradiation. The thickness transformed to fuzz in the HEA/W multilayer films was observed to be about two-thirds of those in the CrMoTaWV (HEA) film. Additionally, the fuzz growth rates in HEA/W multilayer films are lower than the average growth rate of bulk W and HEA films combined. These findings highlight a promising new avenue for the exploration of high-performance PFMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Magnetic multilayer edges in Bernal-stacked hexagonal boron nitride

Single-layer h-BN is known to have edges with unique magnetism; however, in the commonly fabricated multilayer AA'-h-BN, edge relaxations occur that create interlayer bonds and eliminate the unpaired electrons at the edge. Recently, a robust method of growing the unconventional Bernal-stacked h-BN (AB-h-BN) has been reported. Here, we use theoretical approaches to investigate the nitrogen-terminated zigzag edges in AB-h-BN that can be formed in a controlled fashion using a high-energy electron beam. We find that these "open"edges remain intact in bilayer and multilayer AB-h-BN, enabling researchers potentially to investigate these edge states experimentally. We also investigate the thermodynamics of the spin configurations at the edge by constructing a lattice model that is based on parameters extracted from a set of first-principles calculations. We find that the edge spins in neighboring layers interact very weakly, resulting in a sequence of independent spin chains in multilayer samples. By solving this model using Monte Carlo simulations, we can determine nm-scale correlation lengths at liquid-N 2 temperatures and lower. At low temperatures, these edges may be utilized in magnetoresistance and spintronics applications.

1-dimensional spin chains↗
DOE OSTI2020

Bloch Chirality Induced by an Interlayer Dzyaloshinskii-Moriya Interaction in Ferromagnetic Multilayers

Chiral spin textures stabilized by the interfacial Dzyaloshinkii-Moriya interaction, such as skyrmions and homochiral domain walls, have been shown to exhibit qualities that make them attractive for their incorporation in a variety of spintronic devices. However, for thicker multilayer films, mixed textures occur in which an achiral Bloch component coexists with a chiral Néel component of the domain wall to reduce the demagnetization field at the film surface. We show that an interlayer Dzyaloshinkii-Moriya interaction can break the degeneracy between Bloch chiralities. We further find large population asymmetries and chiral branching in the Bloch component of the domain walls in well-ordered Co/Pd multilayers. This asymmetry is a result of the combined effect of the demagnetization field and an interlayer Dzyaloshinkii-Moriya interaction, and is strongly related to film thickness and structural ordering. This work paves the way toward the utilization of this effect toward controlling Bloch chirality in magnetic multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Tuning the interlayer coupling in La 0.7 Sr 0.3 Mn 0.95 Ru 0.05 O 3 / LaNiO 3 multilayers with perpendicular magnetic anisotropy

In ferromagnetic oxide epitaxial multilayers, magnetic properties and interlayer coupling are determined by a variety of factors. Beyond the contribution of interlayer exchange coupling, strain and interfacial effects, such as structural reconstructions or charge transfer, play significant roles, resulting in complex magnetic behavior. In this study, the interlayer coupling of ferromagnetic La 0.7 ⁢Sr 0.3⁢ Mn 0.95 ⁢Ru 0.05 ⁢O 3 (LSMRO) layers (8 nm thick) was investigated, when separated by epitaxial spacers of paramagnetic metallic LaNiO 3 (LNO), in stacks exhibiting perpendicular magnetic anisotropy. By varying the thickness of the spacer, it was found that the coupling between two LSMRO layers changes from antiferromagnetic (with a 4-unit-cell-thick LNO spacer) to ferromagnetic (with a 6-unit-cell-thick LNO spacer). For multilayers comprising five LSMRO layers and a 4-unit-cell-thick LNO spacer, the antiferromagnetic coupling was preserved. However, the effective magnetic anisotropy changed, causing the magnetization to cant more towards the in-plane direction. Further, this behavior was corroborated by X-ray magnetic circular dichroism (XMCD) investigations at the Mn and Ni L 3 edges. The XMCD results indicated that the 4-unit-cell-thick LNO spacer in the multilayer become magnetically ordered, closely following the magnetization of adjacent LSMRO layers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tip-based proximity ferroelectric switching and piezoelectric response in wurtzite multilayers

Proximity ferroelectricity is a paradigm for inducing ferroelectricity when a nonferroelectric polar material (such as Al⁢ N), which is unswitchable with an external field below the dielectric breakdown field, becomes a practically switchable ferroelectric in direct contact with a thin switchable ferroelectric layer (such as Al 1−𝑥 ⁢Sc 𝑥 ⁢N). Here, we develop a Landau-Ginzburg-Devonshire approach to study the proximity effect of local piezoelectric response and polarization reversal in wurtzite ferroelectric multilayers under a sharp electrically biased tip. Using finite-element modeling, we analyze the probe-induced nucleation of nanodomains, the features of local polarization hysteresis loops and coercive fields in the Al 1−𝑥 ⁢Sc 𝑥 ⁢N/Al⁢ N bilayers and three-layers. Similar to the wurtzite multilayers sandwiched between two parallel electrodes, the regimes of “proximity switching” (when all layers collectively switch) and the regime of “proximity suppression” (when they collectively do not switch) are the only two possible regimes in the probe-electrode geometry. However, the parameters and asymmetry of the local piezoresponse and polarization hysteresis loops depend significantly on the sequence of the layers with respect to the probe. The physical mechanism of proximity ferroelectricity in the local probe geometry is a depolarizing electric field determined by the polarization of the layers and their relative thickness. The field, whose direction is opposite to the polarization vector in the layer(s) with the larger spontaneous polarization (such as Al⁢ N), renormalizes the double-well ferroelectric potential to lower the steepness of the switching barrier in the “otherwise unswitchable” polar layers. Tip-based control of domains in otherwise nonferroelectric layers using proximity ferroelectricity can provide nanoscale control of domain reversal in memory, actuation, sensing, and optical applications. The ability of the tip-induced proximity switching to differentially switch multilayers, based on the order of the layers, provides a powerful tool for selective domain engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2020

PDADMAC/PSS Oligoelectrolyte Multilayers: Internal Structure and Hydration Properties at Early Growth Stages from Atomistic Simulations

We analyze the internal structure and hydration properties of poly(diallyl dimethyl ammonium chloride)/poly(styrene sulfonate sodium salt) oligoelectrolyte multilayers at early stages of their layer-by-layer growth process. Our study is based on large-scale molecular dynamics simulations with atomistic resolution that we presented recently [Sánchez et al., Soft Matter 2019, 15, 9437], in which we produced the first four deposition cycles of a multilayer obtained by alternate exposure of a flat silica substrate to aqueous electrolyte solutions of such polymers at 0.1M of NaCl. In contrast to any previous work, here we perform a local structural analysis that allows us to determine the dependence of the multilayer properties on the distance to the substrate. We prove that the large accumulation of water and ions next to the substrate observed in previous overall measurements actually decreases the degree of intrinsic charge compensation, but this remains as the main mechanism within the interface region. We show that the range of influence of the substrate reaches approximately 3 nm, whereas the structure of the outer region is rather independent from the position. This detailed characterization is essential for the development of accurate mesoscale models able to reach length and time scales of technological interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unveiling the Emergent Traits of Chiral Spin Textures in Magnetic Multilayers

Abstract Magnetic skyrmions are topologically wound nanoscale textures of spins whose ambient stability and electrical manipulation in multilayer films have led to an explosion of research activities. While past efforts focused predominantly on isolated skyrmions, recently ensembles of chiral spin textures, consisting of skyrmions and magnetic stripes, are shown to possess rich interactions with potential for device applications. However, several fundamental aspects of chiral spin texture phenomenology remain to be elucidated, including their domain wall (DW) structure, thermodynamic stability, and morphological transitions. Here the evolution of these textural characteristics are unveiled on a tunable multilayer platform—wherein chiral interactions governing spin texture energetics can be widely varied—using a combination of full‐field electron and soft X‐ray microscopies with numerical simulations. With increasing chiral interactions, the emergence of Néel helicity, followed by a marked reduction in domain compressibility, and finally a transformation in the skyrmion formation mechanism are demonstrated. Together with an analytical model, these experiments establish a comprehensive microscopic framework for investigating and tailoring chiral spin texture character in multilayer films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reducing Antisolvent Use in the STRAP Process by Enabling a Temperature–Controlled Polymer Dissolution and Precipitation for the Recycling of Multilayer Plastic Films

The recently reported processing strategy called solvent-targeted recovery and precipitation (STRAP) enables deconstruction of multilayer plastic packaging films into their constituent resins by selective dissolution. It uses a series of solvent washes that are guided by thermodynamic calculations of polymer solubility. In this work, the use of antisolvents in the STRAP process was reduced and solvent mixtures were considered to enable the temperature-controlled dissolution and precipitation of the target polymers in multilayer films. This was considered as a means to further improve the STRAP process and its estimated costs. Two STRAP approaches were compared based on different polymer precipitation techniques: precipitation by the addition of an antisolvent (STRAP-A) and precipitation by decreasing the solvent temperature (STRAP-B). Both approaches were able to separate the constituent polymers in a post-industrial film composed primarily of polyethylene (PE), ethylene vinyl alcohol (EVOH), and polyethylene terephthalate (PET) with near 100 % material efficiency. Technoeconomic analysis indicates that the minimum selling price (MSP) of the recycled resins with STRAP-B is 21.0 % lower than that achieved with STRAP-A. This provides evidence that thermally driven polymer precipitation is an option to reduce the use of antisolvents, making the STRAP process more economically and environmentally attractive. A third process, STRAP-C, was demonstrated with another post-industrial multilayer film of a different composition. Here, the results demonstrate that this process can also recover polymers at similar costs to those of virgin resins, indicating that the STRAP technology is flexible and can remain economically competitive as the plastic feed complexity is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

TiN‐Au/HfO 2 ‐Au Multilayer Thin Films with Tunable Hyperbolic Optical Response

Abstract Hyperbolic metamaterials (HMM) possess significant anisotropic physical properties and tunability and thus find many applications in integrated photonic devices. HMMs consisting of metal and dielectric phases in either multilayer or vertically aligned nanocomposites (VAN) form are demonstrated with different hyperbolic properties. Herein, self‐assembled HfO 2 ‐Au/TiN‐Au multilayer thin films, combining both the multilayer and VAN designs, are demonstrated. Specifically, Au nanopillars embedded in HfO 2 and TiN layers forming the alternative layers of HfO 2 ‐Au VAN and TiN‐Au VAN. The HfO 2 and TiN layer thickness is carefully controlled by varying laser pulses during pulsed laser deposition (PLD). Interestingly, tunable anisotropic physical properties can be achieved by adjusting the bi‐layer thickness and the number of the bi‐layers. Type II optical hyperbolic dispersion can be obtained from high layer thickness structure (e.g., 20 nm), while it can be transformed into Type I optical hyperbolic dispersion by reducing the thickness to a proper value (e.g., 4 nm). This new nanoscale hybrid metamaterial structure with the three‐phase VAN design shows great potential for tailorable optical components in future integrated devices.

Chemistry↗
DOE OSTI2020

Thermo-mechanical modeling and experimental validation for multilayered metallic microstructures

This paper presents thermo-mechanical modeling on multilayered metallic microstructures consisting of two bilayers that enable 3D deployment once being Joule heated. Additionally, a representative design of such microstructures, as well as their working principle is introduced. Furthermore, a mathematical model is derived using Euler–Bernoulli beam theory, and analytical solutions describing out-of-plane displacement of the multilayered microstructures when uniformly heated, which is validated by finite element analysis. Parametric analysis on thermal load and dimensional change of beam shows a good agreement between the analytical solutions and results given by finite element analysis. The phases of the near-equiatomic NiTi layer are analyzed by EDS and XRD, which prove to be austenite during the Joule heating process. The mechanical properties of austenite NiTi are incorporated into the analytical solutions that provides a good estimation of 3D deployment of microstructures made of NiTi and aluminum. The experimental results provide an approximately 7 µm out-of-plane deployment by applying a uniform temperature increase of 132 K, and parametric analysis on the dimension of top aluminum beam offers another promising approach to larger 3D deployment. The proposed mathematical model provides an efficient tool for predicting the out-of-plane deployment of such multilayered microstructures.

36 MATERIALS SCIENCE↗