Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Acceptor and compensating donor doping of single crystalline SnO (001) films grown by molecular beam epitaxy and its perspectives for optoelectronics and gas-sensing

(La and Ga)-doped tin monoxide [stannous oxide, tin (II) oxide, SnO] thin films were grown by plasma-assisted and suboxide molecular beam epitaxy with dopant concentrations ranging from ≈ 5 × 10 18 to 2 × 10 21 cm -3 . In this concentration range, the incorporation of Ga into SnO was limited by the formation of secondary phases observed at 1.2 × 10 21 cm -3 Ga, while the incorporation of La showed a lower solubility limit. Transport measurements on the doped samples reveal that Ga acts as an acceptor and La as a compensating donor. While Ga doping led to an increase in the hole concentration from 1 × 10 18 -1 × 10 19 cm -3 for unintentionally doped (UID) SnO up to 5 × 10 19 cm -3 , La-concentrations well in excess of the UID acceptor concentration resulted in semi-insulating films without detectable n-type conductivity. Ab initio calculations qualitatively agree with our dopant assignment of Ga and La and further predict In Sn to act as an acceptor as well as Al Sn and B Sn as donors. These results show the possibilities of controlling the hole concentration in p-type SnO, which can be useful for a range of optoelectronic and gas-sensing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Molecular beam epitaxy growth and optoelectronic properties of droplet-free lattice-matched GaInAsSbBi on GaSb with wavelength extension exceeding 5 μ m

GaInAsSbBi alloys are grown lattice-matched on GaSb by molecular beam epitaxy demonstrating smooth surface morphologies, >5 μm wavelength photoluminescence emission, and minority carrier lifetimes >1 μs. At a growth temperature of 400 °C, the Ga flux is systematically increased and the Bi flux systematically decreased to identify GaInAsSbBi growth conditions that yield smooth droplet-free surface morphologies. The minority carrier lifetime is evaluated using time-resolved photoluminescence, where it is observed that GaInAsSbBi samples exhibit minority carrier lifetimes comparable to their Bi-free GaInAsSb counterparts, on the order of 1.5–2 μs. The bandgap and Urbach energy are evaluated from steady-state photoluminescence to gain insight into the impact of the incorporated Bi. Coupled with Rutherford backscattering spectrometry measurements of the Bi mole fraction, bandgap reduction rates of 97 meV/% Bi in InAsSbBi and 150 meV/% Bi in GaInAsSbBi are observed, significantly higher than previous evaluations in InAsSbBi (35–55 meV/% Bi). Detailed comparisons of the Bi mole fraction, bandgap energy, and Urbach energy indicate that the bandgap reduction potential in this alloy system is inhibited by the formation of Bi clusters; however, the inclusion of Ga in the quinary alloy is effective in suppressing Bi's tendency to incorporate in clusters for Ga mole fractions >9%, maximizing the bandgap reduction per unit Bi and overall optoelectronic quality.

Atomic force microscopy↗
DOE OSTI2021

Hybrid molecular beam epitaxy growth of BaTiO 3 films

The ability to reproducibly synthesize thin films with precise composition and controlled structure is essential for fundamental study and mass production. Here, we demonstrate the hybrid molecular beam epitaxy (MBE) growth of epitaxial, single crystalline BaTiO3 films with different thicknesses on Nb-doped SrTiO3 substrates with atomically smooth surfaces. By combining scanning transmission electron microscopy, temperature-dependent high-resolution x-ray diffraction, reflection high-energy electron diffraction, and atomic force microscopy, we study the effect of growth conditions and the interplay between stoichiometry and epitaxial strain on the resulting structure. Furthermore, we demonstrate a close to bulk-like ferroelectric phase transition in thicker films and highlight the effect of strain on the phase transition temperature. This work establishes the hybrid MBE approach for the growth of heteroepitaxial BaTiO3 films on conducting substrates with scalable thickness and controlled stoichiometry.

Materials Science↗
DOE OSTI2024

Molecular beam scattering of ammonia from a dodecane flat liquid jet

The evaporation and scattering of ND 3 from a dodecane flat liquid jet are investigated and the results are compared with previous studies on molecular beam scattering from liquid surfaces. Evaporation is well-described by a Maxwell–Boltzmann flux distribution with a cos θ angular distribution at the liquid temperature. Scattering experiments at E i = 28.8 kJ mol -1 over a range of deflection angles show evidence for impulsive scattering and thermal desorption. Further, at a deflection angle of 90°, the thermal desorption fraction is 0.49, which is higher than that of other molecules previously scattered from dodecane and consistent with work performed on NH 3 scattering from a squalane-wetted wheel. ND 3 scattering from dodecane results in super-specular scattering, as seen in previous experiments on dodecane. The impulsive scattering channel is fitted to a “soft-sphere” model, yielding an effective surface mass of 55 amu and an internal excitation of 5.08 kJ mol -1 . Overall, impulsively scattered ND 3 behaves similarly to other small molecules scattered from dodecane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular beam homoepitaxy of N-polar AlN on bulk AlN substrates

N-polar AlN epilayers were grown on the N-face of single-crystal bulk AlN substrates by plasma-assisted molecular beam epitaxy. A combination of in situ thermal deoxidation and Al-assisted thermal desorption at high temperature aided in removing native surface oxides and impurities from the N-polar surface of the substrate enabling successful homoepitaxy. Subsequent epitaxial growth of the AlN layer on the in situ cleaned substrates, grown in a sufficiently high Al droplet regime, exhibited smooth surface morphologies with clean and wide atomic steps. KOH etch studies confirmed the N-polarity of the homoepitaxial films. Secondary ion mass spectrometry profiles show Si and H impurity concentrations below the noise levels, whereas O and C impurity concentrations of [Formula: see text] and [Formula: see text] atoms/cm 3 are observed, respectively. Although the structural defect densities are low, they interestingly appear as inversion domains of different dimensionalities.

Singhal, Jashan↗
DOE OSTI2026

Synthesis of epitaxial TaO$_2$ thin films on Al$_2$O$_3$ by suboxide molecular-beam epitaxy and thermal laser epitaxy

Tantalum dioxide (TaO2) is a metastable tantalum compound. Here, we report the epitaxial stabilization of TaO2 on Al2O3 (1-102) (r-plane sapphire) substrates using suboxide molecular-beam epitaxy (MBE) and thermal laser epitaxy (TLE), demonstrating single-oriented, monodomain growth of anisotropically strained thin films. Microstructural investigation is performed using synchrotron X-ray diffraction and scanning transmission electron microscopy. The tetravalent oxidation state of tantalum is confirmed using X-ray absorption and photoemission spectroscopy as well as electron energy-loss spectroscopy. Optical properties are investigated via spectroscopic ellipsometry and reveal a 0.3 eV Mott gap of the tantalum 5d electrons. Density-functional theory and group theoretical arguments are used to evaluate the limited stability of the rutile phase and reveal the potential to unlock a hidden metal-insulator transition concomitant with a structural phase transition to a distorted rutile phase, akin to NbO2. Our work expands the understanding of tantalum oxides and paves the way for their integration into next-generation electronic and photonic devices.

FOS: Physical sciences↗
DOE OSTI2025

Synthesis and Physical Properties of Manganese Chromium Nitride Thin Films Grown via Molecular Beam Epitaxy

Here, we demonstrate the ability to grow epitaxial thin films of manganese–chromium nitride (Mn x Cr 1–x N) across the entire composition range on magnesium oxide (MgO) (1 0 0) surfaces by molecular beam epitaxy. By independently controlling the ratio of the atomic fluxes of manganese and chromium, the compositional dependence of structural and electrical transport properties is determined. Soft X-ray absorption shows that the valence states of Cr( 3+ ) and Mn( 3+ ) remain identical among these MnCrN epitaxial films. The metallic transport behavior of binary manganese nitride (MnN) and chromium nitride (CrN) is suppressed in the ternary alloys. Changes in room temperature electrical resistivity of up to 100 times and 5 orders of magnitude at cryogenic temperatures are observed. This work expands the variety of nitride compounds available for epitaxial integration and could provide additional flexibility for the development of metal–semiconductor–insulator junctions for spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A reduced model for edge localized mode control by supersonic molecular beam injection and pellet injection

We develop a diffusive, bistable, tri-unstable cellular automata (CA) model to study the dynamics of H-mode pedestal with edge localized modes (ELMs) and their control by supersonic molecular beam injection (SMBI) and pellet injection (PI). It is shown that the new CA model can reproduce the key features of H-mode pedestals with various types of ELM, including Type-I ELM. SMBI and PI are modeled as additional grain injections into pedestal with varying degrees of injected materials and profiles. It is found that H-mode pedestal responds to SMBI differently depending on the baseline fueling. If the baseline fueling is large enough to allow Type-I ELM, SMBI enhances large transport avalanches caused by ballooning instabilities. These avalanches prevent the total pedestal current from reaching the boundary for peeling instability. On the other hand, if the baseline fueling is low to avoid Type-I ELM, SMBI enhances small scale avalanches, which prevent the pedestal from growing to profiles globally vulnerable to ballooning instabilities. These imply that SMBI can mitigate different types of ELM by converting them to more benign types. From CA modeling of pellet injection, it is shown that Type-I ELM can be triggered by pellet injection with sufficient strength and depth. Scanning the frequency of pellet injection, it is found that a maximum efficiency of pellet pacing is achieved when the injection frequency is approximately ten times the natural frequency of Type-I ELM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Low-loss superconducting titanium nitride grown using plasma-assisted molecular beam epitaxy

Titanium nitride (TiN) is a known superconducting material that is attractive for use as passive components in superconducting circuits for both conventional and quantum information devices. In contrast to conventional synthesis techniques, here, plasma-assisted molecular beam epitaxy is reported to produce high-quality TiN on bare silicon wafers. Using a rf-plasma source to crack the nitrogen molecules and a conventional high-temperature effusion cell for titanium, TiN growth is completed under nitrogen-rich conditions. The growth and nucleation is monitored in situ, while the structure and composition are characterized using x-ray diffraction, atomic force microscopy, x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and scanning transmission electron microscopy. The stoichiometric TiN (111) films sit on an amorphous nitride layer with low impurity concentrations. The films superconduct with Tc=5.4 K, and coplanar waveguide resonators are fabricated with a small center width of 6 μm that demonstrate single-photon quality factors approaching 1M and high-power quality factors over 5M without observing saturation.

Richardson, C. J. K. (ORCID:0000000188175347)↗
DOE OSTI2022

Semi-metallic SrIrO 3 films using solid-source metal-organic molecular beam epitaxy

Perovskite SrIrO 3 films and its heterostructures are very promising, yet less researched, avenues to explore interesting physics originating from the interplay between strong spin–orbit coupling and electron correlations. Elemental iridium is a commonly used source for molecular beam epitaxy (MBE) synthesis of SrIrO 3 films. However, elemental iridium is extremely difficult to oxidize and evaporate while maintaining an ultra-high vacuum and a long mean free path. Here, we calculated a thermodynamic phase diagram to highlight these synthesis challenges for phase-pure SrIrO 3 and other iridium-based oxides. We addressed these challenges using a novel solid-source metal-organic MBE approach that rests on the idea of modifying the metal-source chemistry. Phase-pure, single-crystalline, coherent, epitaxial (001) pc SrIrO 3 films on (001) SrTiO 3 substrate were grown. Films demonstrated semi-metallic behavior, Kondo scattering, and weak antilocalization. Our synthesis approach has the potential to facilitate research involving iridate heterostructures by enabling their atomically precise syntheses.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Growth of tetragonal PtO by molecular-beam epitaxy and its integration into β-Ga 2 O 3 Schottky diodes

We demonstrate the epitaxial growth of tetragonal platinum monoxide (PtO) on MgO, TiO 2 , and β-Ga 2 O 3 single-crystalline substrates by ozone molecular-beam epitaxy. We provide synthesis routes and derive a growth diagram under which PtO films can be synthesized by physical vapor deposition. A combination of electrical transport and photoemission spectroscopy measurements, in conjunction with density functional theory calculations, reveal PtO to be a degenerately doped p-type semiconductor with a bandgap of E g ≈ 1.6 eV. Spectroscopic ellipsometry measurements are used to extract the complex dielectric function spectra, indicating a transition from free-carrier absorption to higher photon energy transitions at E ≈ 1.6 eV. Using tetragonal PtO as an anode contact, we fabricate prototype Schottky diodes on n-type Sn-doped β-Ga 2 O 3 substrates and extract Schottky barrier heights of ϕ B > 2.2 eV.

Hensling, Felix V. E. [Cornell Univ., Ithaca, NY (↗
DOE OSTI2025

Experimental and theoretical investigation of the crystalline surface, film, and interface properties of antiperovskite Mn 3 GaN grown by molecular beam epitaxy on MgO(001)

Here, we present a study of the epitaxial growth, characterization, and theoretical modeling of thin film antiperovskite Mn 3 GaN, an antiferromagnetic material with kagome structure which is grown on MgO (001) substrates using N-plasma-assisted molecular beam epitaxy. Reflection high energy electron diffraction is used to assess the in-plane evolution of the film structure during growth, and the surface is investigated in-situ using scanning tunneling microscopy and Auger electron spectroscopy. These results are combined with precision measurements done ex-situ determining the film lattice constants using a combination of x-ray diffraction with reciprocal space mapping and scanning transmission electron microscopy. Overall, a uniform, homogeneous film with an atomically smooth vacuum surface and atomically sharp substrate interface is found having very small in-plane tensile strain and mild out-of-plane compressive strain. First-principles theoretical calculations are applied in order to ascertain the lowest energy models for both the Mn 3 GaN surface and the Mn 3 GaN/MgO film/substrate interface. Models including MnGa versus MnN surface layers and MnGa versus MnN interfacial layers are considered as functions of both the Mn and Ga chemical potentials. The predictions are discussed in comparison to the experimental results. The overall findings suggest that Mn 3 GaN on MgO(001) is a viable epitaxial film which can be further explored in connection with antiferromagnetic spintronics.

Density functional theory↗
DOE OSTI2024

Utilizing Quantum Cascade Lasers for Ultranarrow Velocity Resolution and Quantum-State Selectivity in Molecular Beam Scattering and Spectroscopy

Here, we demonstrate the capability of a narrow linewidth quantum cascade laser (QCL) to selectively excite a very narrow velocity range of nitric oxide (σ ≤ 7(3) m/s) with a pure ro-vibrational quantum state. By implementing a counter-propagating geometry, the molecules are selectively excited according to the Doppler shift of the ro-vibrational transition frequency such that the velocity width associated with the excited molecules depends only on the QCL linewidth. We demonstrate a velocity distribution limited by the effective linewidth of our free-running QCL (Γ = 3.2 MHz). Our development provides a cost-effective, flexible approach to resolve quantum-state selective chemical dynamics with excellent velocity resolution in a wide variety of molecules with infrared-active transitions. This technique has been formulated to provide ultrahigh collisional energy resolution in molecular beams to delineate final quantum-state product pairs in studies of molecular collisions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular beam epitaxy of PdO on MgO (001)

PdO, widely used in catalysis in powder form for decades, has been predicted recently to be a Dirac semimetal. Synthesis of high-quality single crystals of this material is thus of great interest. Here, by using ozone-assisted molecular beam epitaxy, PdO thin films were grown on a MgO (001) substrate. X-ray diffraction and transmission electron microscopy indicate the film is a / b axis oriented, with the c axis lying in plane. Fully oxygenated PdO films have a low density of holelike carriers, and are insulating at the lowest temperatures. Our density functional theory calculations using the Heyd-Scuseria-Ernzerhof exchange-correlation functional suggest a ~1.0 eV band gap at the M point, where the gap can be reduced by tensile strain along the c axis and the bands begin to invert when the tensile strain is as high as 18%. Although tensile strain of this magnitude is experimentally not viable using epitaxy, electrons can be doped by oxygen reduction. Finally, our results emphasize the need for careful consideration of electron correlation effects and stoichiometry in ab initio modeling of topological semimetals involving transition metal oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Molecular beam homoepitaxy of N-polar AlN: Enabling role of aluminum-assisted surface cleaning

N-polar aluminum nitride (AlN) is an important building block for next-generation high-power radio frequency electronics. We report successful homoepitaxial growth of N-polar AlN by molecular beam epitaxy (MBE) on large-area, cost-effective N-polar AlN templates. Direct growth without any in situ surface cleaning leads to films with inverted Al polarity. It is found that Al-assisted cleaning before growth enables the epitaxial film to maintain N-polarity. The grown N-polar AlN epilayer with its smooth, pit-free surface duplicates the structural quality of the substrate, as evidenced by a clean and smooth growth interface with no noticeable extended defects generation. Near band-edge photoluminescence peaks are observed at room temperature on samples with MBE-grown layers but not on the bare AlN templates, implying the suppression of nonradiative recombination centers in the epitaxial N-polar AlN.

42 ENGINEERING↗
DOE OSTI2021

Statistical Correlation Between Quantum Entanglement and Spin–Orbit Coupling in Crossed Beam Molecular Dynamics

Non-classical features like interference are already being harnessed to control the output of chemical reactions. However, quantum entanglement which is an equally enigmatic many-body quantum correlation can also be used as a powerful resource yet has eluded explicit attention. In this report, an experimental scheme under the crossed beam molecular dynamical setup, with the F + HD reaction, is proposed aiming to study the possible influence of entanglement within reactant pairs on the angular features of the product distribution. The aforesaid reaction has garnered interest recently, as an unusual horseshoe shape pattern in the product (HF) distribution was observed, which has been attributed to the coupling of spin and orbital degrees of freedom. An experimental scheme is proposed aiming to study the possible influence of entanglement on the necessity for the inclusion of such spin–orbit characteristics, under circumstances wherein the existence of entanglement and spin–orbit interaction is simultaneously detectable. The attainable results are further numerically simulated highlighting specific patterns corresponding to various possibilities. Finally, such studies if extended can provide unforeseen mechanistic insight into analogous reactions, too, from the lens of quantum information.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Molecular beam epitaxy of the magnetic Kagome metal FeSn on LaAlO 3 (111)

Materials with Kagome layers are expected to give rise to rich physics arising from band structures with topological properties, spin liquid behavior, and the formation of Skyrmions. Until now, most work on Kagome materials has been performed on bulk samples due to difficulties in thin film synthesis. Here, by using molecular beam epitaxy, layered Kagome-structured FeSn films are synthesized on the (111) oriented LaAlO3 substrate. Both in situ and ex situ characterizations indicate that these films are highly crystalline and c-axis oriented, with atomically smooth surfaces. The films grow as disconnected islands, with lateral dimensions on the micron meter scale. By patterning Pt electrodes using a focused electron beam, the longitudinal and transverse resistance of single islands have been measured in magnetic fields. Our work opens a pathway for exploring mesoscale transport properties in thin films of Kagome materials and related devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular beam epitaxy of phase-pure antiperovskite Sr 3 SnO thin films

The antiperovskite oxide Sr 3 SnO has attracted substantial interest due to its topologically non-trivial band structure. Sr-deficient Sr3-xSnO can become superconducting, making it a candidate intrinsic topological superconductor. Here, we show that epitaxial, phase-pure Sr 3-x SnO films can be synthesized by molecular beam epitaxy (MBE) using solid Sr and SnO 2 sources. Here, we show that Sn-rich growth conditions result in a large amount of a Sn-rich impurity phase, which is challenging to detect in x-ray diffraction. Carrier densities and the amount of the impurity phase change systematically with the growth conditions, indicating that MBE provides excellent control over the films' stoichiometry. We discuss the electrical properties, including quantum interference phenomena, which support the topological nature of the films.

36 MATERIALS SCIENCE↗