Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixture experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ultrasonic degradation of GenX (HFPO-DA) – Performance comparison to PFOA and PFOS at high frequencies

Sonolytic degradation kinetics of hexafluoropropylene oxide-dimer acid (HFPO-DA or GenX) were studied for the first time at four high ultrasonic frequencies (375, 580, 860 and 1,140kHz) and three power densities (200, 300 and 400W/L), and compared to the degradation of previously studied perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS). The frequency of 580kHz displayed the highest degradation of all three PFAS tested. Within each frequency, the degradation performance increased consistently with increasing power density. Degradation rates were highest for GenX over PFOA to PFOS (k GenX = 0.0501 min -1 , k PFOA = 0.0444 min -1 , k PFOS 0.0153 min -1 ), which is in direct agreement with their reported thermal stability (PFOS > PFOA > GenX). No known by-product formation as expected from the literature on truncation mechanism was detected in the samples (i.e. shorter chain carboxylic acid PFAS). Further, fluorine mass balance experiments at 580kHz and 400W/ L confirmed that GenX defluorinated fastest among the three tested PFAS and had lowest loss of fluorine in the mass balance. Degradation experiments with a mixture of all three PFAS displayed lower degradation rates than the individual experiments, where PFOA exhibited the largest reduction in degradation rate (by 31%), followed by GenX (by 19%), and finally by PFOS (by 17%). Overall, our study demonstrates that ultrasound can provide effective destruction of different PFAS (70-90% fluorine from mitigated PFAS was detected as inorganic fluoride) with a similar energy demand to alternative PFAS treatment methods reported in literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2024

Lunar Soil Enrichment for Plant Production: WILD (Waste Improved Lunar Dirt)

To identify a process to generate a fertile soil for plant growth using lunar regolith and waste compost, several qualitative and quantitative investigations were performed. The primary focus of this project was to demonstrate the feasibility of microbe bioleaching to extract inorganic plant nutrients (P and K) from lunar regolith simulant. This was achieved by developing a screening test method to identify microbial candidates that would effectively bioleach P and K from JSC-1A. Quantitative bioleaching test using the downselected microbes (Pantoea Agglomerans (P. agglo) and a plant-relevant consortium) were then performed. The second focus of the project was to validate the approach of waste compost utilization to improve water retention and fertility of lunar regolith for food production. This was achieved by measuring the water retention property of the mixture of compost and regolith at different ratio and conducting microgreen growth experiments with compost/regolith mixtures. The team also discovered from this study that some native microbes associated with JSC-1A can form biofilm containing JSC-1A particles (a type of soil crust), which showed potential as an ISRU geomicrobiological dust mitigation method for Lunar or Martian applications.

Ray Pitts↗
NASA NTRS1991

Combustion of unsupported methanol/dodecanol mixture droplets at low gravity

Experiments are reported on the combustion of free or unsupported methanol/dodecanol mixture droplets in a reduced gravity environment. The experiments were conducted in a drop tower. The Grashof number (based on drop diameter) in the moving frame of reference was on the order of 10 exp -5 for the period of droplet burning. Combustion of the mixture droplets was characterized by a multi-stage process indicative of diffusion controlled burning. The flame was not visible during the first stage because of the lighting used, but was visible (and spherical) in the final stage. The results suggested that the mixture droplets did not extinguish. By contrast, methanol droplets consistently extinguished. Microexplosions were not observed for mixtures with initial concentrations of equal volumes of methanol and dodecanol. However, most of the droplets containing initially 75 percent (by volume) of methanol exploded. The initiation of microexplosion, as defined by the occurrence of homogeneous nucleation within the droplet, is explained by comparing the calculated nonlinear variation of superheat limit with composition for a methanol/dodecanol mixture with the boiling point of dodecanol.

Yang, J. C.↗
NASA NTRS2001

A Model for Formation of Dust, Soil and Rock Coatings on Mars: Physical and Chemical Processes on the Martian Surface

This model is one of many possible scenarios to explain the generation of the current surface material on Mars using chemical, magnetic and spectroscopic data From Mars and geologic analogs from terrestrial sites. One basic premise of this model is that the dust/soil units are not derived exclusively from local rocks, but are rather a product of global, and possibly remote, weathering processes. Another assumption in this model is that there are physical and chemical interactions of the atmospheric dust particles and that these two processes create distinctly different results on the surface. Physical processes distribute dust particles on rocks and drift units, forming physically-aggregated layers; these are reversible processes. Chemical reactions of the dust/soil particles create alteration rinds on rock surfaces and cohesive, crusted surface units between rocks, both of which are relatively permanent materials. According to this model the dominant components of the dust/soil particles are derived from alteration of volcanic ash and tephra, and contain primarily nanophase and poorly crystalline ferric oxides/oxyhydroxide phases as well as silicates. These phases are the alteration products that formed in a low moisture environment. These dust/soil particles also contain a smaller amount of material that was exposed to more water and contains crystalline ferric oxides/oxyhydroxides, sulfates and clay silicates. These components could have formed through hydrothermal alteration at steam vents or fumeroles, thermal fluids, or through evaporite deposits. Wet/dry cycling experiments are presented here on mixtures containing poorly crystalline and crystalline ferric oxides/oxyhydroxides, sulfates and silicates that range in size from nanophase to 1-2 pm diameter particles. Cemented products of these soil mixtures are formed in these experiments and variation in the surface texture was observed for samples containing smectites, non-hydrated silicates or sulfates. Reflectance spectra were measured of the initial particulate mixtures, the cemented products and ground versions of the cemented material. The spectral contrast in the visible/near-infrared and mid-infrared regions is significantly reduced for the cemented material compared to the initial soil, and somewhat reduced for the ground, cemented soil compared to the initial soil. The results of this study suggest that diurnal and seasonal cycling on Mars will have a profound effect on the texture and spectral properties of the dust/soil particles on the surface. The model developed in this study provides an explanation for the generation of cemented or crusted soil units and rock coatings on Mars and may explain albedo variations on the surface observed near large rocks or crater rims.

Bishop, Janice↗
DOE OSTI2014

Influence of gas temperature on self-sustained volume discharge characteristics in working mixtures of a repetitively pulsed COIL

The influence of gas temperature on the characteristics of a self-sustained volume discharge was studied in the working mixtures of a chemical oxygen – iodine laser with pulsed electricdischarge production of iodine atoms. In experiments, laser working mixtures were modelled by the mixture of air and iodide C{sub 2}H{sub 5}I. It was established that mixture heating is accompanied by an increase in the voltage across the discharge plasma and by a decrease in the discharge current. By varying the temperature of the mixture with the iodine content of ∼2.7% and initial pressure p=12 Torr from 22 °C to 96 °C, the current amplitude falls by ∼12%, and at the instant corresponding to a maximal current the voltage raises by ∼22%. Such a change in the discharge characteristics is explained by a higher rate of electron attachment to vibrationally excited iodide molecules at elevated temperatures. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2001

Some Recent Observations on the Burning of Isolated N-Heptane and Alcohol Droplets

In a joint program involving Prof. F.A. Williams of the University of California, San Diego and Dr. V. Nayagam of the National Center for Microgravity Research on Combustion and Fluid Dynamics, the combustion of liquid fuel droplets of n-heptane, n-decane, methanol, methanol-water, ethanol and ethanol-water having initial diameters between about 1 mm and 6 mm continues to be studied. The objectives of the work are to improve fundamental knowledge of droplet combustion dynamics for pure fuels and fuel-water mixtures through microgravity experiments and theoretical analyses. The Princeton contributions to the collaborative program supports the engineering design, data analysis, and data interpretation requirements for the study of initially single component, spherically symmetric, isolated droplet combustion studies through experiments and numerical modeling. The complementary UCSD contributions apply asymptotic theoretical analyses and are described in the published literature and in a companion communication in this conference. The combined program continues to focus on analyses of results obtained from Fiber Supported Droplet Combustion (FSDC) experiments (FSDC-2, STS- 94) conducted with the above fuels in shuttle cabin air and Droplet Combustion Experiment (DCE) data obtained for unsupported and fiber supported droplets of n-heptane in Helium-Oxygen mixtures and cabin air (STS-83, STS-94). The program is preparing for a second DCE experimental mission using methanol/methanol-water as fuels and helium-oxygen-nitrogen environments. DCE-2 is to be conducted aboard the International Space Station. Emphases of recent Princeton work are on the study of simple alcohols (methanol, ethanol) and alcohol/water mixtures as fuels, with time-dependent measurements of drop size, flame-standoff, liquid-phase composition, and finally, extinction. Ground based experiments have included bench-scale studies at Princeton and collaborative experimental studies in the 2.2 second drop tower at NASA-Glenn Research Center.

Dryer, F. L.↗
DOE OSTI2017

New insights into the shock tube ignition of H 2 /O 2 at low to moderate temperatures using high-speed end-wall imaging

In this study, the effects of pre-ignition energy releases on H 2 —O 2 mixtures were explored in a shock tube with the aid of high-speed imaging and conventional pressure and emission diagnostics. Ignition delay times and time-resolved camera image sequences were taken behind the reflected shockwaves for two hydrogen mixtures. High concentration experiments spanned temperatures between 858 and 1035 K and pressures between 2.74 and 3.91 atm for a 15% H 2 \18% O 2 \Ar mixture. Low concentration data were also taken at temperatures between 960 and 1131 K and pressures between 3.09 and 5.44 atm for a 4% H 2 \2% O 2 \Ar mixture. These two model mixtures were chosen as they were the focus of recent shock tube work conducted in the literature. Experiments were performed in both a clean and dirty shock tube facility; however, no deviations in ignition delay times between the two types of tests were apparent. The high-concentration mixture (15%H 2 \18%O 2 \Ar) experienced energy releases in the form of deflagration flames followed by local detonations at temperatures < 1000 K. Measured ignition delay times were compared to predictions by three chemical kinetic mechanisms: GRI-Mech 3.0, AramcoMech 2.0, and Burke's et al. (2012) mechanisms. It was found that when proper thermodynamic assumptions are used, all mechanisms were able to accurately predict the experiments with superior performance from the well-validated AramcoMech 2.0 and Burke et al. mechanisms. Current work provides better guidance in using available literature hydrogen shock tube measurements, which spanned more than 50 years but were conducted without the aid of high-speed visualization of the ignition process, and their modeling using combustion kinetic mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Shock tube measurements of growth constants in the branched chain formaldehyde-carbon monoxide-oxygen system

Exponential free radical growth constants were measured for formaldehyde carbon monoxide-oxygen systems by monitoring the growth of oxygen atom concentration as manifested by CO flame band emission. Data were obtained over the temperature range of 1200 to 2000 K. The data were analyzed using a formaldehyde oxidation mechanism involving 12 elementary reaction steps. The computed growth constants are roughly in accord with experimental values, but are much more temperature dependent. The data was also analyzed assuming formaldehyde is rapidly decomposed to carbon monoxide and hydrogen. Growth constants computed for the resulting carbon monoxide hydrogen oxygen mixtures have a temperature dependence similar to experiments; however, for most mixtures, the computed growth constants were larger than experimental values.

Brabbs, T. A.↗
NASA NTRS2003

Coarsening Experiment Prepared for Flight

The Coarsening in Solid-Liquid Mixtures-2 (CSLM-2) experiment is a materials science spaceflight experiment whose purpose is to investigate the kinetics of competitive particle growth within a liquid matrix. During coarsening, small particles shrink by losing atoms to larger particles, causing the larger particles to grow. In this experiment, solid particles of tin will grow (coarsen) within a liquid lead-tin eutectic matrix. The following figures show the coarsening of tin particles in a lead-tin (Pb-Sn) eutectic as a function of time. By conducting this experiment in a microgravity environment, we can study a greater range of solid volume fractions, and the effects of sedimentation present in terrestrial experiments will be negligible. The CSLM-2 experiment flew November 2002 on space shuttle flight STS-113 for operation on the International Space Station, but it could not be run because of problems with the Microgravity Science Glovebox in the U.S. Laboratory module. Additional samples will be sent to ISS on subsequent shuttle flights.

Hickman, J. Mark↗
DOE OSTI2019

MIS High-Purity Plutonium/Uranium Oxide Hydride Product 5501407 (SSR129): Final Report

A high-purity uranium/plutonium mixed oxide material from the Material Identification and Surveillance (MIS) Program inventory has been studied with regard to gas generation and corrosion in a storage environment. Sample 5501579 represents process plutonium oxides from high purity mixed oxides and mixed oxides from alloy oxidation at Hanford, hydride oxide from Rocky Flats, and mixed oxides from alloy oxidation and scrap mixed oxides at Savannah River that are currently stored in 3013 containers. This study followed over time the gas pressure of two samples of this material with nominally 0.5 wt% water in a sealed container with an internal volume scaled to 1/500th of the volume of a 3013 container. The first experiment studied a mixture of 60% as-received material (AR) and 40% material that had been calcined at 950 °C. The mixture contained 66% weapons grade plutonium and 11% uranium, with approximately 7.3% impurities and the remainder principally oxygen. A second experiment studied material calcined at 950 °C which contained approximately 4.3% impurities and similar uranium and plutonium content. Gas compositions were measured periodically over approximately 3.5 years in the first container and 20 months for the second container, which was terminated early due to an inadvertent container pumpdown. The maximum observed gas pressures were 152 kPa and 161 kPa, respectively. The increase over the initial pressures of 82 kPa and 88 kPa, respectively, was primarily due to generation of carbon dioxide and nitrogen gases. In the container with the AR/calcined mixture, a small amount of hydrogen and oxygen was generated and was consumed. In the container with calcined material only, hydrogen partial pressure of 18.9 kPa was measured. A small amount of oxygen was generated and was consumed. At the completion of the study, the internal components of both sealed containers showed signs of corrosion

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Effect of excess Mg to control corrosion in molten MgCl 2 and KCl eutectic salt mixture

Structural alloys may experience corrosion when exposed to molten chloride salts due to selective dissolution of active alloying elements. One way to prevent this is to make the molten salt reducing. For the KCl + MgCl 2 eutectic salt mixture, pure Mg can be added to achieve this. However, Mg can form intermetallic compounds with nickel at high temperatures, which may cause alloy embrittlement. This work shows that an optimum level of excess Mg could be added to the molten salt which will prevent corrosion of alloys like 316 H, while not forming any detectable Ni-Mg intermetallic phases on Ni-rich alloy surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Coarsening Experiment Being Prepared for Flight

The Coarsening in Solid-Liquid Mixtures-2 (CSLM-2) experiment is a materials science space flight experiment whose purpose is to investigate the kinetics of competitive particle growth within a liquid matrix. During coarsening, small particles shrink by losing atoms to larger particles, causing the larger particles to grow. In this experiment, solid particles of tin will grow (coarsen) within a liquid lead-tin eutectic matrix. The preceding figures show the coarsening of tin particles in a lead-tin eutectic as a function of time. By conducting this experiment in a microgravity environment, we can study a greater range of solid volume fractions, and the effects of sedimentation present in terrestrial experiments will be negligible. The CSLM-2 experiment is slated to fly onboard the International Space Station. The experiment will be run in the Microgravity Science Glovebox installed in the U.S. Laboratory module.

Hickman, J. Mark↗
NASA NTRS2017

Comparison of Mixing Characteristics for Several Fuel Injectors on an Open Plate and in a Ducted Flowpath Configuration at Hypervelocity Flow Conditions

In order to reduce the cost and complexity associated with fuel injection and mixing experiments for high-speed flows, and to further enable optical access to the test section for nonintrusive diagnostics, the Enhanced Injection and Mixing Project (EIMP) utilizes an open flat plate configuration to characterize inert mixing properties of various fuel injectors for hypervelocity applications. The experiments also utilize reduced total temperature conditions to alleviate the need for hardware cooling. The use of "cold" flows and non-reacting mixtures for mixing experiments is not new, and has been extensively utilized as a screening technique for scramjet fuel injectors. The impact of reduced facility-air total temperature, and the use of inert fuel simulants, such as helium, on the mixing character of the flow has been assessed in previous numerical studies by the authors. Mixing performance was characterized for three different injectors: a strut, a ramp, and a flushwall. The present study focuses on the impact of using an open plate to approximate mixing in the duct. Toward this end, Reynolds-averaged simulations (RAS) were performed for the three fuel injectors in an open plate configuration and in a duct. The mixing parameters of interest, such as mixing efficiency and total pressure recovery, are then computed and compared for the two configurations. In addition to mixing efficiency and total pressure recovery, the combustion efficiency and thrust potential are also computed for the reacting simulations.

Drozda, Tomasz G.↗
NASA NTRS2000

Characterizing the Use of Ultrasonic Energy in Promoting Uniform Microstructural Dispersions in Immiscible Mixtures

Gravity driven separation and preferential wetting precludes uniform microstructural distributions during solidification processing of immiscible, liquid-liquid mixtures. Historically, it is, however, established that liquid/liquid suspensions can be established and maintained by utilizing ultrasound. Following a brief introduction the results of experiments on immiscible mixtures subjected to ultrasonic energy during solidification processing will be compared and evaluated in view of a recently developed mathematical model. The presentation continues by discussion of scaling the model to commercial viability and concludes with the implications of such processing in a microgravity environment.

Grugel, R. N.↗
NASA NTRS2001

Characterizing the Use of Ultrasonic Energy in Promoting Uniform Microstructural Dispersions in Immiscible Mixtures

Gravity driven separation and preferential wetting precludes uniform microstructural distributions during solidification processing of immiscible, liquid-liquid mixtures. Historically, it is, however, established that liquid/liquid suspensions can be established and maintained by utilizing ultrasound. Following a brief introduction the results of experiments on immiscible mixtures subjected to ultrasonic energy during solidification processing will be compared and evaluated in view of a recently developed mathematical model. The presentation continues by discussion of scaling the model to commercial viability and concludes with the implications of such processing in a microgravity environment.

Grugel, R. N.↗
DOE OSTI2021

Prenatal exposure to mixtures of persistent endocrine disrupting chemicals and postnatal body size in British girls

Endocrine disrupting chemical (EDC) exposure is ubiquitous. EDC exposure during critical windows of development may interfere with the body's endocrine system, affecting growth. Previous human studies have examined one EDC at a time in relation to infant growth. By studying mixtures, the human experience can be better approximated. We investigated the association of prenatal exposure to persistent EDCs (per- and polyfluoroalkyl substances (PFAS), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs)) as mixtures with postnatal body size among female offspring. We used a sub-sample of the Avon Longitudinal Study of Parents and Children (N = 425), based in the United Kingdom. We quantified 52 EDCs in maternal serum collected during pregnancy. We used Bayesian kernel machine regression with a random intercept to examine the association of prenatal concentrations of EDC mixtures with longitudinal postnatal body size measures for each EDC class separately (PFAS, PCBs, and OCPs) and for all three classes combined. Weight and height measures at 0, 2, 9, and 19 months were obtained by health professionals as part of routine child health surveillance. The mixture representing all three classes combined (31 chemicals) (n = 301) was inversely associated with postnatal body size. Holding all EDCs in the 31-chemical mixture at the 75th percentile compared to the 50th percentile was associated with 0.15 lower weight-for-age z-score (95% credible interval –0.26, –0.03). Weak inverse associations were also seen for height-for-age and body mass index-for-age scores. Furthermore, these results suggest that prenatal exposure to mixtures of persistent EDCs may affect postnatal body size.

59 BASIC BIOLOGICAL SCIENCES↗