Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lunar surface exploration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Lunar Resources Catalog (LRC): Viper Pathfinder Dataset

Introduction: A new era in lunar exploration has recently begun. Through NASA’s robotic Commercial Lunar Payload Services (CLPS) initiative, international and the human Artemis programs, multiple assets are being deployed to explore the Moon and at a rapid cadence. There will be a huge expanse in lunar surface exploration with mobility (e.g., rovers). Several missions are focused on collecting data for assessing lunar resources for potential In-Situ Resource Utilization (ISRU). With this expansion in exploration there will be a commensurate expansion in the volume and variety of data. Work has begun on establishing a measurement plan (i.e., what data is needed) for ISRU [1] but how to integrate these data into the broader Planetary Data Ecosystem (PDE) following FAIR (i.e., Findability, Accessibility, Interoperability, and Reuse) data practices has not been addressed. The VIPER team intends to engage this challenge.

VIPER↗
NASA NTRS2008

Long-Range Transhorizon Lunar Surface Radio Wave Propagation in the Presence of a Regolith and a Sparse Exospheric Plasma

Long-range, over-the-horizon (transhorizon) radio wave propagation is considered for the case of the Moon. In the event that relay satellites are not available or otherwise unwarranted for use, transhorizon communication provides for a contingency or backup option for non line-of-sight lunar surface exploration scenarios. Two potential low-frequency propagation mechanisms characteristic of the lunar landscape are the lunar regolith and the photoelectron induced plasma exosphere enveloping the Moon. Although it was hoped that the regolith would provide for a spherical waveguide which could support a trapped surface wave phenomena, it is found that, in most cases, the regolith is deleterious to long range radio wave propagation. However, the presence of the plasma of the lunar exosphere supports wave propagation and, in fact, surpasses the attenuation of the regolith. Given the models of the regolith and exosphere adopted here, it is recommended that a frequency of 1 MHz be considered for low rate data transmission along the lunar surface. It is also recommended that further research be done to capture the descriptive physics of the regolith and the exospheric plasma so that a more complete model can be obtained. This comprehensive theoretical study is based entirely on first principles and the mathematical techniques needed are developed as required; it is self-contained and should not require the use of outside resources for its understanding.

Manning, Robert M.↗
NASA NTRSDate not supplied

Developing Materials and Coating Technologies for Mitigation of Lunar Dust Adhesion and Abrasion

In order to support long duration missions on the Moon’s surface, materials resistant to the harsh lunar environment are critically needed. Lunar dust poses a major threat to the durability of components and vehicles due to its fine, jagged morphology and highly abrasive nature, enabling the particles to adhere and embed onto surfaces of components and devices and potentially leading to premature failure. There is significant effort within NASA to develop novel materials and coating technologies to mitigate lunar dust adhesion and abrasion. This effort has been exploring a variety of production routes and examining properties of candidate material systems, including ceramic, metallic and polymeric. Manufacturing methods investigated include ceramic powder processing, additive manufacturing and surface modification via laser ablation patterning of bulk materials and coatings. An overview of ongoing NASA materials and coating research and development efforts to enable lunar surface exploration will be presented.

Materials, Coatings, lunar dust mitigation↗
NASA NTRS1966

Summary

Scientific data and observations summary of Surveyor I lunar surface exploration

SPACE PHOTOGRAPHY↗
NASA NTRS1971

The characterization of facsimile camera systems for lunar and planetary surface exploration

Advantages of facsimile camera systems are reviewed for imagery of lunar and planetary surfaces from stationary or stopped remotely controlled vehicles. They include: better geometric fidelity than television systems, more picture elements per frame, ability to take single frame panoramic pictures, a very high contrast ratio within a picture, a choice of one or more narrow-band spectral responses over a wide possible range, image transmission over a low bit-rate communications channel without storage, very low power, small size, low weight, and ruggedizability to meet space flight requirements. Systems of this kind are under development for the 1975 Viking Martian lander, and have been used by the Soviets on Lunas and Lunokhod laboratory and field evaluation of a completed facsimile camera system is presented. The applicability of facsimile cameras to lunar and planetary rovers is demonstrated.

Eisenman, A.↗
NASA NTRS2002

ANTS: Applying A New Paradigm for Lunar and Planetary Exploration

ANTS (Autonomous Nano- Technology Swarm), a mission architecture consisting of a large (1000 member) swarm of picoclass (1 kg) totally autonomous spacecraft with both adaptable and evolvable heuristic systems, is being developed as a NASA advanced mission concept, and is here examined as a paradigm for lunar surface exploration. As the capacity and complexity of hardware and software, demands for bandwidth, and the sophistication of goals for lunar and planetary exploration have increased, greater cost constraints have led to fewer resources and thus, the need to operate spacecraft with less frequent human contact. At present, autonomous operation of spacecraft systems allows great capability of spacecraft to 'safe' themselves and survive when conditions threaten spacecraft safety. To further develop spacecraft capability, NASA is at the forefront of development of new mission architectures which involve the use of Intelligent Software Agents (ISAs), performing experiments in space and on the ground to advance deliberative and collaborative autonomous control techniques. Selected missions in current planning stages require small groups of spacecraft weighing tens, instead of hundreds, of kilograms to cooperate at a tactical level to select and schedule measurements to be made by appropriate instruments onboard. Such missions will be characterizing rapidly unfolding real-time events on a routine basis. The next level of development, which we are considering here, is in the use of autonomous systems at the strategic level, to explore the remote terranes, potentially involving large surveys or detailed reconnaissance.

Clark, P. E.↗
NASA NTRS2010

Lunar Outpost Life Support Architecture Study Based on a High-Mobility Exploration Scenario

This paper presents results of a life support architecture study based on a 2009 NASA lunar surface exploration scenario known as Scenario 12. The study focuses on the assembly complete outpost configuration and includes pressurized rovers as part of a distributed outpost architecture in both stand-alone and integrated configurations. A range of life support architectures are examined reflecting different levels of closure and distributed functionality. Monte Carlo simulations are used to assess the sensitivity of results to volatile high-impact mission variables, including the quantity of residual Lander oxygen and hydrogen propellants available for scavenging, the fraction of crew time away from the outpost on excursions, total extravehicular activity hours, and habitat leakage. Surpluses or deficits of water and oxygen are reported for each architecture, along with fixed and 10-year total equivalent system mass estimates relative to a reference case. System robustness is discussed in terms of the probability of no water or oxygen resupply as determined from the Monte Carlo simulations.

Lange, Kevin E.↗
NASA NTRSDate not supplied

Development of an Inertial Sensor-based Methodology for Spacesuited Geology Task Assessments during Simulated Lunar Extravehicular Activities

Lunar surface exploration during Artemis missions will require the specific skill set of geology sampling. Apollo astronauts had extensive training and used specialized tools to collect lunar rocks, core samples, pebbles, sand, and dust. The inflexibility of the pressurized Apollo spacesuits forced sampling to be taken at a standstill posture. However, new exploration spacesuits are expected to incorporate advanced materials and joint bearings, allowing for greater mobility and a wider range of functional postures. Thus, science and exploration during Artemis missions will likely involve a variety of standing, squatting, and kneeling postures. In preparation for future lunar exploration missions, NASA provides geologic training to astronauts and other mission personnel. This professional training with a spacesuit in simulated lunar environments will enhance performance and reduce risk of injury to astronauts on the lunar surface. However, anecdotally, untrained or newly trained people wearing prototype planetary spacesuits have been observed to performing motions differently than a trained geologist would when conducting the same geology sampling tasks. Therefore, a tool for evaluating geology postures at extravehicular activity (EVA) training facilities becomes required. In this paper, we introduce a novel inertial measurement unit (IMU)-based method of geology task assessments in spacesuited conditions during simulated lunar EVAs. As a case study, two subjects (one geologist and one non-geologist) participated and donned the Mark III prototype planetary spacesuit during offloading with the spreader bar gimbal in NASA’s Active Response Gravity Offload System (ARGOS). For automated geology task assessments, the spacesuit was instrumented with three wireless IMUs (APDM Opal, OR, USA): one on the chest and one each on the left and right ankle bearings. Then subjects performed geology tasks using various tools (rake, trench, hammer chisel, scoop, and drive tube) for 45 minutes each. The chest IMU measured the torso tilt angle in the sagittal plane. We used an ensemble learning method with the ankle IMUs to discriminate between standing and kneeling activities. IMU data were processed using custom MATLAB (Mathworks, MA, USA) software. In our case study, the developed method was able to discriminate differences in standing and kneeling activity levels between subjects who were all highly experienced with spacesuited testing. Our preliminary data showed one subject maintained the constant and lower range of the upper body tilt angle while both standing and kneeling, while the other subject showed more variation of the upper body tilt angle and preferred bending the upper body rather than changing from standing to kneeling posture and vice versa. While geology experience may be a factor, these results need further investigation as suit sizing and ARGOS offloading configurations have been proven to have a significant influence on suited ARGOS tasks. Also, more subjects will be needed to complete these tasks for validation. IMU-based geology task assessments can provide useful information for geology training programs. Additionally, our IMU-based posture analysis can provide new insights into how to evaluate spacesuited geology task characteristics of astronauts during simulated lunar EVAs.

Kyoung Jae Kim↗
NASA NTRS1973

ALSEP arrays A, B, C, and A-2

The objectives of the lunar surface exploration packages are defined and the preliminary design of scientific systems hardware is reported. Instrument packages are to collect and transmit to earth scientific data on the lunar interior, the lunar surface composition, and the lunar geomorphology

Source record↗
NASA NTRS2015

The Global Exploration Roadmap: Opportunities for Lunar Science

The Global Exploration Roadmap (GER) has been developed by the International Space Exploration Coordination Group (ISECG comprised of 14 space agencies) to define various pathways to getting humans beyond low Earth orbit and eventually to Mars. Such pathways include visiting asteroids or the Moon before going on to Mars. This document has been written at a very high level and many details are still to be determined. However, a number of important papers regarding international space exploration can form a basis for this document.This poster will focus on developing the Lunar Vicinity scenario by adding detail via mapping a number of recent reportsdocuments into the GER. The documents highlighted here are in no way meant to be all encompassing and other documents can and should be added, (e.g., the JAXA Space Exploration Roadmap). This exercise is intended to demonstrate that existing documents can be mapped into the GER despite the major differences in granularity, and that this mapping is a way to promote broader national and international buy-in to the Lunar Vicinity scenario.The documents used here are: the Committee on Space Research (COSPAR) Panel on Exploration report on developing a global space exploration program, the Strategic Knowledge Gaps (SKGs) report from the Lunar Exploration Analysis Group (LEAG), the Lunar Exploration Roadmap developed by LEAG, the National Research Council report Scientific Context for the Exploration of the Moon (SCEM), and two journal articles, the scientific rationale for resuming lunar surface exploration, and the astrobiological benefits of human space exploration.In addition, the ISECG is in the process of developing a Science White Paper (SWP) to accompany the next edition of the GER, due in late 2016. The SWP will be an important tool to communicate science which will be able to be accomplished at human exploration destinations to policymakers. This abstract will discuss the process of developing this SWP and ways in which the global science community can become engaged in its development.

Schmidt, Gregory↗
NASA NTRS1965

Apollo mission

Operational aspects of proposed lunar surface exploration activities reviewed by astronaut in training

OPERATIONAL PROBLEM↗
NASA NTRS2023

Lunar LTE Studies DRATS 2022 Report

In October 2022, the Lunar LTE Studies (LunarLiTES) team from the National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) conducted a series of communications field test measurements through the NASA Desert Research and Technology Studies (DRATS) campaign held near Flagstaff, Arizona. The objective of the NASA DRATS outings are to provide analog mission testing of candidate technologies for space exploration, especially those technologies applicable to human exploration of extraterrestrial rocky bodies. These activities are performed at locations with similarities to extraterrestrial conditions, such as the dry, volcanic landscape north of Flagstaff. This report describes the surface-to-surface communications testing performed by LunarLiTES as part of the 2022 NASA DRATS experiments. The objectives of this testing were to collect data for the development and refinement of radio frequency (RF) propagation models and emulation techniques, as well as to evaluate the application of terrestrial cellular communication technologies to lunar surface exploration.

lunar communication↗
NASA NTRS1964

Lunar surface activities

Possible excursions for typical 35-hour lunar surface exploration, experimental and recording instruments, sample collection, and photography

PHOTOGRAPHIC RECORDING↗
NASA NTRS2022

Bringing Planetary Science Mission Outreach to the Deaf and Blind Communities

Introduction: Technology for enhancing outreach, like 3D printing, and science communication products, such as videos and podcasts, can be utilized within the planetary science community, especially for the engagement and excitement of current or upcoming planetary exploration missions. However, these communication products can also be further enhanced for the benefit of the blind and deaf communities. While such products may already be readily available, such projects are not easily accessible to blind and/or deaf certified educators, which often rely on making their own resources or do not have the funds to provide such resources (e.g., cost of 3D printers or cost of braille books). The planetary science community can have better practices to reach these broader audiences. Best practices can include transcripts from podcasts, transcripts in videos, and large-font captions. Images on websites and social media accounts should also include alt-text descriptive captions. 3D printing can also enhance planetary science for the blind community, through tactile posters, maps, and pamphlets. Planetary data can also be augmented by providing different tactile geological maps (e.g., topography or various datasets), and audio-visual videos freely available for educators. Visual Engagement: Visual engagement consists of several avenues to consider, the three main themes includes: 1) swag; 2) videos; 3) interactive exploration. Swag can include the fun visual take-home materials, such as stickers, posters, bookmarks, etc. Videos can include educational-specific videos (available freely via YouTube or by other educational-specific streaming avenues, such as Nebula or Curiosity Stream), provided they have Closed Captioning (CC). The use of QR codes to such videos or websites can also benefit to being added on swag. Interactive exploration can also be sub-divided by different types of engagement. A popular and still fairly new technology for public engagement is the use of virtual reality (VR). While this has been mainly for martian and lunar surface exploration [1], the deaf communities can benefit from VR through a more extensive look at our solar system and beyond (for example, a VR experience of the flight path, or visual map of the heliosphere/dynamics of our Sun). Audio Engagement: Audio tools can also be a useful avenue of communication, especially for the blind communities. Audio archiving can certainly be transcripts from the video engagements, but also the use of podcasts can also be a benefit. Podcasting can take on two forms: 1) interview engagement; and 2) update engagement. For interviews, scientists can communicate with STEM-specific podcast platforms to make other listener-bases aware of what is going on with a specific mission. For update-type communication, missions may opt to have an archived podcast of news, updates, and the teams involved. The most important aspect of such podcasts would be for the need of complimentary transcripts (including descriptive transcripts if sounds are included), and the limited use of jargon. Research Engagement: There have been several examples of involving the blind and low-vision communities in citizen science, such as through the NASA Heliophysics division. Examples include the NASA PUNCH (Polarimeter to Unify the Corona and Heliosphere) mission led by the Southwest Research Institute [2], which include blind and visually-impaired citizens to assist in the Sun’s coronal rhythms.” Another example is the Eclipse Soundscapes: Citizen Science Project (ES:CSP), which documents observations of acoustical changes of nature and ecosystems during solar eclipse events [3]. Inclusivity: A major theme that is necessary for public engagement is inclusivity and the awareness of reaching broader audiences. Outreach to include hearing/seeing impaired communities are still lacking in the sciences. There are several opportunities that the planetary sciences could take. Other projects that have emerged from the space sciences include adding transcripts to visual engagement [4], and the use of 3D printing for the visually-impaired [5]. References: [1] Olgin, J. (2020) 51st LPSC, Abstract 2137. [2] https://scitechdaily.com/outreach-for-nasa-punch-mission-embraces-ancient-and-modern-sun-watching-theme/ [3] https://science.nasa.gov/science-activation-team/eclipse-soundscapes [4] NASA International Observe the Moon Night (Blind and Deaf Accessible), Youtube Video ( https://www.youtube.com/watch?v=neHCfg0S3-Q) [5] Richardson, J., et al. (2018) AGU Fall Meeting, Abstract ED23F-0963.

C J Ahrens↗
NASA NTRS1973

Nutrition systems for pressure suits.

Nutrition systems were successfully developed in the Apollo Program for astronauts wearing pressure suits during emergency decompression situations and during lunar surface explorations. These nutrition systems consisted of unique dispensers, water, flavored beverages, nutrient-fortified beverages, and intermediate moisture food bars. The emergency decompression system dispensed the nutrition from outside the pressure suit by interfacing with a suit helmet penetration port. The lunar exploration system utilized dispensers stowed within the interior layers of the pressure suit. These systems could be adapted for provision of nutrients in other situations requiring the use of pressure suits.

Huber, C. S.↗
NASA NTRS2012

Desert Research and Technology Studies (DRATS) Traverse Planning

Slide 1] The Desert Research and Technology Studies (DRATS) include large scale field tests of manned lunar surface exploration systems; these tests are sponsored by the Director s Office of Integration (DOI) [sic, Directorate Integration Office (DIO)] within the Constellation Program and they include geological exploration objectives along well designed traverses. These traverses are designed by the Traverse Team, an ad hoc group of some 10 geologists form NASA and academia, as well as experts in mission operation who define the operational constraints applicable to specific simulation scenarios. [Slide 2] These DRATS/DOI tests focus on 1) the performance of major surface systems, such as rovers, mobile habitats, communication architecture, navigation tools, earth-moving equipment, unmanned reconnaissance robots etc. under realistic field conditions and 2) the development of operational concepts that integrate all of these systems into a single, optimized operation. The participation of science is currently concentrating on geological sciences, with the objective of developing suitable tools and documentation protocols to sample representative rocks for Earth return, and to generate some conceptual understanding of the ground support structure that will be needed for the real time science-support of a lunar surface crew. [Slide 3] Major surface systems exercised in the June 2008 analog tests at the Moses Lake site, WA. [Upper left] The Chariot Rover (developed at Johnson Space Center) is an unpressurized vehicle driven by fully suited crews. [Upper right] Mobile Habitat provided by the Jet Propulsion Laboratory. Chariot is the more nimble and mobile vehicle and the idea is to drive the habitat remotely to some rendezvous place where Chariot would catch up - after a lengthy traverse - at the end of the day. [Lower left] The K-10 remotely operated robot (provided by NASA Ames Research Center) conducting scientific/geologic reconnaissance of the prospective traverse region, locating specific sites for more detailed exploration by Chariot and its crew. [Lower right] This earth-moving equipment (provided by NASA KSC) can be attached to Chariot and is envisioned to, for example, level an outpost site or to mine lunar soi

Horz, Friedrich↗
NASA NTRSDate not supplied

NASA’s Moon-to-Mars Planetary Autonomous Construction Technology Project: Overview and Status

NASA plans to land the first woman and next man on the Moon by 2025 through the initial Artemis missions. NASA and its international partners plan to establish a sustainable long-term presence on the lunar surface and build up infrastructure in the subsequent Artemis missions. The Lunar Surface Innovation Initiative (LSII), within NASA’s Space Technology Mission Directorate, aims to spur the creation of novel technologies needed for lunar surface exploration and accelerate the technology readiness of key systems and components. The primary thrust areas of LSII include sustainable power; dust mitigation; in-situ resource utilization; surface excavation, construction, and outfitting; and extreme access/extreme environments. The Moon-to-Mars Planetary Autonomous Construction Technology (MMPACT) projectwas initiated to address the lunar surface construction thrust area of LSII. The goal of the MMPACT project is to develop, deliver, and demonstrate on-demand capabilities to protect astronauts and create infrastructure on the lunar surface via construction of landing pads, habitats, shelters, roadways, berms and blast shields using lunar regolith-based materials. The MMPACT project is leveraging technology derived from NASA’s 3D Printed Mars Habitat Challenge along with contributions from other Government agencies, and multiple partners within industry and academia. The MMPACT project is comprised of three interrelated elements, construction hardware and process development; feedstock materials development; and microwave structure construction capabilities. These elements are working together to address the multiple challenges of infrastructure construction on the surface of the Moon including increased autonomy of operations, hardware operation and manufacturing under lunar environmental conditions, long-duration operation of mechanisms and parts, scale of construction activities, and material and construction requirements and standards. This presentation will summarize the status of development activities in each of the three elements, including testing of the various candidate materials, preliminary design concepts for future lunar infrastructure elements, and the vision for future technology demonstrations on the lunar surface. These demonstrations, targeting the mid-to-late 2020’s, are expected to enable landing pad construction and habitat construction resulting in commercial capabilities early in the next decade.

lunar infrastructure↗
NASA NTRSDate not supplied

NASA’s Moon-to-Mars Planetary Autonomous Construction Technology Project: Overview and Status

NASA plans to land the first woman and next man on the Moon by 2025 through the initial Artemis missions. NASA and its international partners plan to establish a sustainable long-term presence on the lunar surface and build up infrastructure in the subsequent Artemis missions. The Lunar Surface Innovation Initiative (LSII), within NASA’s Space Technology Mission Directorate, aims to spur the creation of novel technologies needed for lunar surface exploration and accelerate the technology readiness of key systems and components. The primary thrust areas of LSII include sustainable power; dust mitigation; in-situ resource utilization; surface excavation, construction, and outfitting; and extreme access/extreme environments. The Moon-to-Mars Planetary Autonomous Construction Technology (MMPACT) project was initiated to address the lunar surface construction thrust area of LSII. The goal of the MMPACT project is to develop, deliver, and demonstrate on-demand capabilities to protect astronauts and create infrastructure on the lunar surface via construction of landing pads, habitats, shelters, roadways, berms and blast shields using lunar regolith-based materials. The MMPACT project is leveraging technology derived from NASA’s 3D Printed Mars Habitat Challenge along with contributions from other Government agencies, and multiple partners within industry and academia. The MMPACT project is comprised of three interrelated elements, construction hardware and process development; feedstock materials development; and microwave structure construction capabilities. These elements are working together to address the multiple challenges of infrastructure construction on the surface of the Moon including increased autonomy of operations, hardware operation and manufacturing under lunar environmental conditions, long-duration operation of mechanisms and parts, scale of construction activities, and material and construction requirements and standards. This presentation will summarize the status of development activities in each of the three elements, including testing of the various candidate materials, preliminary design concepts for future lunar infrastructure elements, and the vision for future technology demonstrations on the lunar surface. These demonstrations, targeting the mid-to-late 2020’s, are expected to enable landing pad construction and habitat construction resulting in commercial capabilities early in the next decade.

Additive construction, regolith processing, lunar ↗