Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lithium diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A conformal heat-drying direct ink writing 3D printing for high-performance lithium-ion batteries

High areal capacity electrodes hold great potential for high-energy density lithium-ion batteries (LIBs), but their poor electrochemical kinetics limit their power density. Here, in this study, high areal capacity 3D-structured LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathodes (4.3 mAh cm -2 ) are prepared via 3D printing with a manner of direct ink writing. The electrodes had an enlarged electrode–electrolyte contact area, shortened diffusion pathway, and reduced intercalation-induced stress, thereby delivering enhanced rate capability and cyclability in LIBs, which is 143.6 mAh g -1 at 3C and a 60.2 % capacity retention over 800 cycles at 1C. Moreover, at electrode level, the 3D-NMC exhibits an energy and power densities of 313.1 Wh kg -1 and 657.9 W kg -1 , respectively. Furthermore, the theoretical calculation suggests that reducing the gap width will be highly beneficial to the energy and power densities. This work establishes a milestone in understanding the cycling effect on the electrode local structure, including the void area and the LiNi 0.8 Mn 0.1 Co 0.1 O 2 region, which confirms the effectiveness of 3D printing for electrode preparation.

25 ENERGY STORAGE↗
DOE OSTI2023

Moisture Absorbing and Water Self‐Releasing from Hybrid Hydrogel Desiccants

Abstract Atmospheric moisture is a valuable resource for fresh water and potentially sustainable energy. However, direct harvesting water from moisture (the vapor form) remains the most challenging. Hybrid desiccants made from hydrogels embedded with salt offer promise in absorbing moisture. However, the desorption process often requires additional energy to heat the samples. Here, poly(acrylic acid) (PAA) hydrogels embedded with lithium chloride are prepared, demonstratng simultaneous moisture absorption and self‐release of liquid water at room temperature with 50–90% relative humidity. The water self‐releasing process can be separated into two distinct stages: 1) surface release, where water droplets grow on the hydrogel surface due to differences in nucleation and diffusion rates, and 2) bulk release, triggered by the collapse of polymer chains, subsequently releasing water from the hydrogel network. Factors such as salt concentration, hydrogel crosslinking density, and film thickness are investigated to better understand the moisture absorption and water‐releasing processes. Moreover, hydrophobic domains are introduced onto the salt‐embedded PAA films, creating an edge effect that enhances the droplet growth rates. When the hydrophobic domains are patterned, the movement of released water can be guided, resulting in a threefold increase in water removal rate attributed to gravitational force.

Chemistry↗
DOE OSTI2023

Complex defect chemistry of hydrothermally-synthesized Nb-substituted β$'$-LiVOPO 4

Lithium vanadyl phosphate (LiVOPO 4 ) is a next-generation multielectron battery cathode that can intercalate up to two Li-ions per V-ion through the redox couples of V 4+ /V 3+ and V 5+ /V 4+ . However, its rate capacity is undermined by the sluggish Li-ion diffusion in the high-voltage region (4 V for V 5+ /V 4+ redox). Nb substitution was used to expand the crystal lattice to facilitate Li-ion diffusion. Here, in this work, Nb substitution was achieved via hydrothermal synthesis, which resulted in a new, lower symmetry β'-LiVOPO 4 phase with preferential Nb occupation of one of the two V sites. This phase presents complex defect chemistries, including cation vacancies and hydrogen interstitials, characterized by a combination of X-ray and neutron diffraction, elemental and thermogravimetric analyses, X-ray absorption spectroscopy, and magnetic susceptibility measurements. The Nb-substituted samples demonstrated improved capacity retention and rate capabilities in the high-voltage region, albeit an enlarged voltage hysteresis related to a partial V 4+ /V 3+ redox reaction, as evidenced by ex situ X-ray absorption spectroscopy and pair distribution function analysis. This work highlights the importance of understanding the complex defect chemistry and its consequence on electrochemistry in polyanionic intercalation compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Concentration dependent properties and plastic deformation facilitate instability of the solid-electrolyte interphase in Li-ion batteries

Lithium-ion batteries (LIBs) often suffer from capacity fading and poor cyclic performance due to mechanical degradation of the solid-electrolyte interphase (SEI). Here we perform numerical simulations and theoretical analysis to elucidate the role of plasticity in wrinkling and ratcheting behaviors of an SEI/electrode system. A coupled diffusion and finite deformation framework is formulated and numerically implemented as a user-element subroutine (UEL) to describe transient lithium diffusion and accompanying elastic–viscoplastic deformation of the electrode. It is found that concentration dependent properties and plastic deformation facilitate wrinkling in such a system. A wrinkled morphology may further lead to ratcheting and related failure under cycling. A phase diagram of four types of cyclic behaviorsis identified in terms of the charging rate and time. Our analysis suggests several potential strategies to avoid wrinkling and ratcheting instabilities, such as charging/discharging the electrode at a sufficiently slow rate, and/or introducing a thick artificial SEI with a pre-tension.

25 ENERGY STORAGE↗
DOE OSTI2022

Insight into the Fast-Rechargeability of a Novel Mo 1.5 W 1.5 Nb 14 O 44 Anode Material for High-Performance Lithium-Ion Batteries

Wadsley–Roth phased niobates are promising anode materials for lithium-ion batteries, while their inherently low electrical conductivity still limits their rate-capability. Herein, a novel doped Mo 1.5 W 1.5 Nb 14 O 44 (MWNO) material is facilely prepared via an ionothermal-synthesis-assisted doping strategy. The detailed crystal structure of MWNO is characterized by neutron powder diffraction and aberration corrected scanning transmission electron microscope, unveiling the full occupation of Mo 6+ -dopant at the t1 tetrahedral site. In half-cells, MWNO exhibits enhanced fast-rechargeability. In this work, the origin of the improved performance is investigated by ultraviolet–visible diffuse reflectance spectroscopy, density functional theory (DFT) computation, and electrochemical impedance spectroscopy, revealing that bandgap narrowing improves the electrical conductivity of MWNO. Furthermore, operando X-ray diffraction elucidates that MWNO exhibits a typical solid-solution phase conversion-based lithium-ion insertion/extraction mechanism with reversible structural evolution during the electrochemical reaction. The boosted lithium-ion diffusivity of MWNO, due to the Mo 6+ /W 6+ doping effect, is confirmed by a galvanostatic intermittent titration technique and DFT. With the simultaneously enhanced electrical conductivity and lithium-ion diffusivity, MWNO successfully demonstrates its fast-rechargeability and practicality in the LiNi 0.5 Mn 1.5 O 4 -coupled full-cells. Therefore, this work illustrates the potential of ionothermal synthesis in energy storage materials and provides a mechanistic understanding of the doping effect on improving material's electrochemical performance.

25 ENERGY STORAGE↗
NASA NTRS1984

Radiation Damage Workshop

The availability of data regarding the radiation behavior of GaAs and silicon solar cells is discussed as well as efforts to provide sufficient information. Other materials are considered too immature for reasonable radiation evaluation. The lack of concern over the possible catastrophic radiation degradation in cascade cells is a potentially serious problem. Lithium counterdoping shows potential for removing damage in irradiated P-type material, although initial efficiencies are not comparable to current state of the art. The possibility of refining the lithium doping method to maintain high initial efficiencies and combining it with radiation tolerant structures such as thin BSF cells or vertical junction cells could provide a substantial improvement in EOL efficiencies. Laser annealing of junctions, either those formed ion implantation or diffusion, may not only improve initial cell performance but might also reduce the radiation degradation rate.

Stella, P. M.↗
DOE OSTI2025

Tetrahedral Lithium Stuffing in Disordered Rocksalt Cathodes for High-Power-Density and Energy-Density Batteries

Li-rich cation-disordered rocksalt (DRX) materials introduce new paradigms in the design of high-capacity Li-ion battery cathode materials. However, DRX materials show strikingly sluggish kinetics due to random Li percolation with poor rate performance. Here, in this study, we demonstrate that Li stuffing into the tetrahedral sites of the Mn-based rocksalt skeleton injects a novel tetrahedron-octahedron-tetrahedron diffusion path, which acts as a low-energy-barrier hub to facilitate high-speed Li transport. Moreover, the enhanced stability of lattice oxygen and the suppression of transition metal migration preserve the efficacy of the Li percolation network during cycling. Overall, the tetrahedral Li stuffing DRX material exhibits high energy density (311 mAh g -1 , 923 Wh kg -1 ) and high power density (251 mAh g -1 , 697 Wh kg -1 at 1000 mA g -1 ). Our results highlight the potential to develop high-performance and earth-abundant cathode materials within the extensive range of rocksalt compounds.

Disordered Rocksalt Cathodes↗
DOE OSTI2023

3D–Integrated, Multi–Functional Carbon Fibers for Stable, High–Areal–Capacity Batteries

Increasing lithium-ion batteries' (LIBs) electrode areal capacity can boost energy density and lower manufacturing costs, but faces challenges in manufacturing, rate performance, and cycling stability. A conductive framework made of commercial micro-sized carbon fibers (Cfs) is presented that serves as a host for both the LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC 532) cathode and Cfs anode. The Cf framework has multiple functions that offer high electronic conductivity (270 mS cm –1 ), low tortuosity (1.7), low Li + diffusion resistance (22 Ω), and high thermal conductivity (200 W mK –1 ). Additionally, the Cf-integrated electrodes can have an extremely high mass loading of NMC 532 (70 mg cm –2 ) with a theoretical capacity of 14 mAh cm –2 . Thus, the practical full cells assembled with the Cfs-enabled electrodes exhibit an initial areal capacity of 4.1 mAh cm –2 and capacity retention of 90.4% at 500 cycles at a cycling rate of C/3, 1.5 mA cm –2 . Data collected from the operando isothermal microcalorimetry suggest that full cells utilizing the Cf anode experience less heat release from side reactions compared to cells utilizing a conventional graphite anode. Finally, this present approach is scalable and cost-effective and can fabricate practical LIBs that boast high areal capacity, rate performance, and a lengthy cycling lifetime.

25 ENERGY STORAGE↗
NASA NTRS1991

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗
NASA NTRS1991

Finite linear diffusion model for design of overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. The model has been experimentally verified using 1,1-prime-dimethylferrocene as a redox additive. The theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗
DOE OSTI2026

Electrode Modification by Laser Ablation to Overcome Mechanical and Scalability Limitations of Solid-State Prealkylation of Electrode Architectures

In this work, laser ablation of Si electrode surfaces is utilized to provide localized strain relief during the Solid State Prealkylation of Electrode Architectures (SPEAR) process, in addition to volumetric expansion relief in the form of free volume channels across the electrode. A hexagonal mesh patterning was employed via laser ablation, where the hexagonal diameter (pitch) was varied from 250 to 1000 µm. It was demonstrated that these channels serve as expansion voids, accommodating the increase in electrode thickness observed during SPEAR and preventing cracking at the electrode surface. Optical microscopy and Raman mapping confirm that Li diffusion is the rate-limiting solid-state process, requiring a 24 h rest period to achieve homogeneous LixSi alloying through the electrode bulk. Electrochemical evaluations in full cells show that a 1000 μm pitch pattern yields a high initial discharge capacity of 2485 mA h g–1 and 86.4% capacity retention after 80 cycles, whereas smaller pitches (<500 μm) result in lithium plating at 4.1 V in full cells paired with NMC 811 due to excessive current collector exposure from the ablation process. XPS analysis reveals that the laser treatment modifies the electrode surface by increasing the Si–O and C–O species, changing the SEI composition observed via an increase in fluorophosphates upon cycling.

Musgrove, Amanda [ORNL] (ORCID:0009000220910389)↗
DOE OSTI2022

Multifunctional transitional metal-based phosphide nanoparticles towards improved polysulfide confinement and redox kinetics for highly stable lithium-sulfur batteries

The shuttle effect and the sluggish redox kinetics of lithium polysulfides (LiPSs) are the major issues impeding the practical applications of lithium-sulfur batteries (LSBs). Herein, a highly-efficient Ni 2 P electrocatalyst supported on N, P co-doped graphene (Ni 2 P@NPG) is developed via a simple “recrystallization-self-assembly” method to address the above issues. Here, the ultrafine Ni 2 P nanoparticles ensure abundant adsorption-diffusion-conversion interfaces for accelerating LiPSs transformation and Li 2 S deposition, which extremely decreases the accumulation of LiPSs in the electrolyte and therefore prevents the migration of LiPSs. Their superior catalytic performance is demonstrated by reduced Gibbs free energy changes of rate-limiting step based on the systematic theoretical calculations and the reduced shuttle effect is tested by the three-dimensional reconstructions of Raman depth profiles. Benefiting from these synergistic effects, the LSBs with Ni 2 P@NPG modified separators present a superior cycling performance with an average capacity decay rate of 0.048 % per cycle at 1C around the 400 cycles and a high-rate capacity of 731 mAh/g at 2C. Even with a high-sulfur loading of 3.53 mg cm –2 , the cell can still contain a reversible capacity of 809 mAh/g at 0.2C with a remarkable columbic efficiency of 98.4 %.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pinned Electrode/Electrolyte Interphase and Its Formation Origin for Sulfurized Polyacrylonitrile Cathode in Stable Lithium Batteries

Sulfurized polyacrylonitrile (SPAN) represents one of the most promising directions for high-energy-density lithium (Li)-sulfur batteries. However, the practical application of Li||SPAN is currently limited by the insufficient chemical/electrochemical stability of electrode/electrolyte interphase (EEI). Here, a pinned EEI layer is designed for stabilizing a SPAN cathode by regulating the EEI formation mechanism in an advanced LiFSI/ether/fluorinated-ether electrolyte. Computational simulations and experimental investigations reveal that, benefiting from the nonsolvating nature, the fluorinated-ether can not only act as a protective shield to prevent the Li polysulfides dissolution but also, more importantly, endow a diffusion-controlled EEI formation process. It promotes the formation of a uniform, protective, and conductive EEI layer pinning into SPAN surface region, enabling the high loading Li||SPAN batteries with superior cycling stability, wide temperature performance, and high-rate capability. Finally, this design strategy opens an avenue for exploring advanced electrolytes for Li||SPAN batteries and guides the interface design for broad types of battery systems.

25 ENERGY STORAGE↗
DOE OSTI2022

Over-Potential Tailored Thin and Dense Lithium Carbonate Growth in Solid Electrolyte Interphase for Advanced Lithium Ion Batteries

A stable solid electrolyte interphase (SEI) is highly desired to prevent parasitic reactions during normal operation of lithium-ion batteries (LIBs). Lithium carbonate (Li 2 CO 3 ) is one of the most significant components for smooth SEI passivation layers; while the formation mechanism and special distribution of the Li 2 CO 3 layer has not yet been illustrated. In this study, an over-potential tailored Li 2 CO 3 growth mechanism based on the typical hard carbon anode is demonstrated. With an increase in the over-potential, the size of Li 2 CO 3 decreases gradually as the amount increases. When the over-potential is large (potential at 0.01 V), a Li 2 CO 3 -rich thin and dense inorganic layer with the average thickness of 4.4 nm in the SEI is constructed. The special SEI the completely wraps the boundaries of the anode enables a larger Li-ion de-solvation energy barrier and a lower Li-ion diffusion energy barrier, which supports low self-discharge behavior and a fast kinetic rate at the anode. More generally, this Li 2 CO 3 growth mechanism is also applicable to commercialized graphite anodes and similar results are also obtained. Therefore, this work provides a new insight into the Li 2 CO 3 growth mechanism in SEIs, as well as a guideline for the design of stable artificial SEIs.

25 ENERGY STORAGE↗
DOE OSTI2020

Predicting cell-to-cell failure propagation and limits of propagation in lithium-ion cell stacks

Thermal runaway of lithium-ion batteries is a risk that is magnified when stacks of lithium-ion cells are used for large scale energy storage. When limits of propagation can be identified so that systems can be designed to prevent large scale cascading failure even if a failure does occur, these systems will be safer. This work addresses the prediction of cell-to-cell failure propagation and the propagation limits in lithium-ion cell stacks to better understand and identify safe designs. A thermal-runaway model is presented based on recent developments in thermochemical source terms. It is noted that propagating failure is characterized by temperatures above which calorimetry data is available. Results show high temperature propagating failure predictions are too rapid unless an intra-particle diffusion limit is included, introducing a Damköhler number limiter into the rate expression. This new model form is evaluated against cell-to-cell failure propagation where the end cell of a stack is forced into thermal runaway through a nail-induced short circuit. Limits of propagation for this configuration are identified. Results show cell-to-cell propagation predictions are consistent with measurements over a range of cell states of charge and with the introduction of metal plates between cells to add system heat capacity representative of structural members. This consistency extends from scenarios where propagation occurs through scenarios where propagation is prevented.

25 ENERGY STORAGE↗
DOE OSTI2026

Understanding NBI heating and fueling in LTX-β tokamak

My work on the contract DE-SC=0023274 (July, 2022 - July, 2025) was focused on understanding the plasma fueling by NBI. On Dec. 1998 with Sergei Krasheninnikov (UCSD, San Diego, CA) we initiated the Li Wall Fusion (LiWFusion) as a new concept of magnetic fusion [1]. The new 1 2 plasma 3 4 5 6 2.1 Overview of rate coefficients, mean-free paths λH0 , and diffusions coefficients 6 2. GSV code for ⟨σv⟩ analysis of NBI fueling concept was a reaction of the lack of luck of tokamak fusion with QDT = 1 on TFTR and JET. We recognized the edge plasma cooling by recycling to be the route reason of the tokamak problems on the way to burning plasma. LiWFusion relies on plasma pumping by a lithium layer on the inner walls of the plasma chamber, combined with the plasma heating and fueling by the Neutral Beam Injection (NBI). These two innovations eliminate the route problem of the tokmak fusion. The concept became theoretically mature in 2006. In 2012, the technology of continuously Flowing Liquid Lithium (24/7-FLiLi) was invented by me for the future implementations of the LWFusion concept. At the same time, my every presentation on LiWFusion to International Symposium on Lithium Applications since 2010 was objected by some person with words “Everybody since the 1970s knows that plasma fueling by NBI is impossible”. I dropped the name of the author of this objection and ignored his views. My work on the current grant on NBI fueling of LTX-β not only clarified the issue but resolved it in an astonishing way. The NBI fueling was fully understood (thus humiliating the current dogmatic fusion community). The new future of LTX-β dedicated for decades to Li in tokamaks, as well as of the entire magnetic fusion program was envisioned, in sharp contrast with the fallure of OFES in the post-TFTR era of 21st century.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Design strategies for ion-sieving charge mosaic membranes toward sustainable lithium extraction

Membrane-based technologies are essential for realizing sustainable ion-sieving processes such as lithium extraction. Much effort was devoted to designing new membrane materials, whereas the effect of charge distribution has been largely overlooked. Here, we filled this knowledge gap by providing a quantitative transport model for selective ion diffusion through a charge mosaic membrane (CMM). Composed of alternating regions of Li-selective ceramic and anion-selective polymeric materials, CMMs offered the unique advantage of promoting the transport of both Li + and anions while blocking other cations. As a result, the membrane achieved a high Li/Mg selectivity of 62 and a high permeation rate of 59 mmol·m −2 ·h −1 at a low feeding concentration of 30 mM, without any external driving force. Systematical experiments revealed the influence of brine Mg/Li ratio and membrane ceramic/polymer ratio on the overall extraction rate, which was consistent with the prediction of our transport model. In conclusion, the model developed in this work not only presented the design strategies of CMMs for Li extraction but also provided guidance for the development of other ion-sieving processes in general.

25 ENERGY STORAGE↗
DOE OSTI2023

Phosphate‐functionalized Zirconium Metal–Organic Frameworks for Enhancing Lithium–Sulfur Battery Cycling

Abstract Lithium–sulfur batteries are promising candidates for next‐generation energy storage devices due to their outstanding theoretical energy density. However, they suffer from low sulfur utilization and poor cyclability, greatly limiting their practical implementation. Herein, we adopted a phosphate‐functionalized zirconium metal–organic framework (Zr‐MOF) as a sulfur host. With their porous structure, remarkable electrochemical stability, and synthetic versatility, Zr‐MOFs present great potential in preventing soluble polysulfides from leaching. Phosphate groups were introduced to the framework post‐synthetically since they have shown a strong affinity towards lithium polysulfides and an ability to facilitate Li ion transport. The successful incorporation of phosphate in MOF‐808 was demonstrated by a series of techniques including infrared spectroscopy, solid‐state nuclear magnetic resonance spectroscopy, and X‐ray pair distribution function analysis. When employed in batteries, phosphate‐functionalized Zr‐MOF (MOF‐808‐PO4) exhibits significantly enhanced sulfur utilization and ion diffusion compared to the parent framework, leading to higher capacity and rate capability. The improved capacity retention and inhibited self‐discharge rate also demonstrate effective polysulfide encapsulation utilizing MOF‐808‐PO4. Furthermore, we explored their potential towards high‐density batteries by examining the cycling performance at various sulfur loadings. Our approach to correlate structure with function using hybrid inorganic–organic materials offers new chemical design strategies for advancing battery materials.

Liu, Bingqian↗