Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “liquid-liquid extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

78 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Novel Diglycolamide Extractant?s Performance in Liquid-Liquid Separations for Pilot Scale Application

Modified diglycolamide (DGA) extractants show high affinity for light lanthanides and improved separation factors compared to phosphonic acids used commercially. Previous studies with DGAs included flowsheet design and implementation into solvent extraction equipment but with low extractant concentration. Modifications on the alkyl chains of previous DGA extractants led to a competitive product for light rare earth separation with a higher extractant concentration. The scope of this project is to test a recently developed DGA extractant for application in pilot scale solvent extraction equipment with single stage testing, by narrowing down scrubbing conditions, and collecting distribution values for flowsheet planning.

42 ENGINEERING↗
DOE OSTI2023

Task 2.1: Adsorption-Based ISPR for BETO-Relevant Bioproducts

This task focuses on the development of adsorption-based in situ product recovery (ISPR) integrated with simulated moving bed chromatography for the recovery and purification of carboxylate products that are relevant to BETO. ISPR has been pursued previously in the Separations Consortium to recover carboxylic acids near or below their pKa values with liquid-liquid extraction coupled to downstream distillation. However, there are many acid products in the BETO portfolio that require neutralization well above their pKa values wherein ISPR could still be a major benefit to the bioprocess performance, including muconic acid, beta-ketoadipic acid, 3-hydroxypropionic acid, itaconic acid, butyric acid, and others. In this task, we are combining dynamic filtration with a rotating ceramic disk, resin capacity measurements, tailored resin synthesis, and simulated moving bed chromatography into an ISPR system that can be used to recover BETO-relevant carboxylates from bioreactor cultivations. We are working across process scales and using computational modeling where applicable alongside techno-economic analysis and life cycle assessment to understand major cost, energy, and GHG emissions drivers. The impact of this project will be a bench-scale integrated approach to recover carboxylate products in situ, which will reduce the waste generation from biological carboxylate production processes and improve the productivities of biological systems.

bio-based acid↗
DOE OSTI2023

Developing a Carbon Negative Biorefinery for Organic Waste Valorization

Production of bio-based chemicals have become increasingly attractive as efforts to meet carbon neutrality goals expand. Diverse organic waste feedstocks can be valorized via arrested anaerobic digestion and chain elongation to produce important key intermediates, such as medium chain carboxylic acids. Our work aims to develop a carbon negative biorefinery that funnels multiple organic waste feedstocks into a chemically consistent stream of carboxylic acids that are then upgraded to exemplary carbon negative products. The pairing of a hydrolysis reactor with a chain elongation reactor will allow each biological step to be optimized to improve the ability to valorize a variety of organic waste streams. Specifically, this work has so far been aimed at screening for potential chain elongating organisms to produce VFAs and MCCAs of interest. Four chain elongating organisms were tested for their chain elongation potential with diverse single and mixed substrates. So far, Megasphaera elsdenii and Actinobacillus succinogenes have been tested to determine potential differences in titer as well as product speciation due to variations in pH. To do this, each organism was tested under 3 different substrate combinations with pH maintained at either 5.5, 6, or 7. With better understanding of their metabolic needs and optimal operating conditions, these chain elongating organisms could provide a valuable option to facilitate the chain elongation necessary to produce precursor molecules. In addition to optimizing the bioconversion steps, downstream processing of carboxylic acids is also a key component for the overall feasibility of the process. Our group previously developed a downstream in-situ product recovery (ISPR) process for continuously recovering bio-based carboxylic acids from fermentation broth. The ISPR includes: (i) a solid-liquid separation as a cell retention device, (ii) a liquid-liquid extraction (LLE) to selectively extract the desired bio-based acids, and (iii) a distillation to obtain the neat product. The integrated process was demonstrated at bench-scale and is now scaled up for pilot-scale operations. A more cost-efficient membrane-based emulsion separation is introduced for LLE in downstream separation process with greatly promoted mass transfer, leading to -2800 times smaller needed membrane area than membrane contactors to achieve the same butyric acid extraction rate.

BIOMASS FUELS↗
DOE OSTI2023

Switchable system for high-salinity brine desalination and fractional precipitation

A saline feed stream flows into a liquid-liquid extraction system; and a volatile organic solvent flows through a main compressor. The compressed volatile organic solvent then flows through a solvent regenerator, which can be a heat exchanger or a combination of a vaporization device and a condenser, to cool the volatile organic solvent. The cooled volatile organic solvent in liquid phase then flows into the liquid-liquid extraction system, where the saline feed stream contacts the volatile organic solvent to selectively extract water from the saline feed stream into the volatile organic solvent, producing a concentrated brine and an organic-rich mixture of water and the volatile organic solvent. The organic-rich mixture flows from the liquid-liquid extraction system into the solvent regenerator, where the organic-rich mixture is heated to produce an organic-rich vapor and desalinated water; and the organic-rich vapor is recycled as volatile organic solvent back into the liquid-liquid extraction system.

Wilson, Aaron D.↗
DOE OSTI2024

Aryl triazole cages

The present disclosure concerns synthesis, anion binding features, liquid-liquid extraction of salts, and anti-corrosion character of aryl-triazole bicyclic macrocycles of Formula (I) and related compounds:

Flood, Amar H.↗
DOE OSTI2021

DOE-GENIORS Dynamic Irradiation Testing

As part of the homogeneous actinides recycling strategy, the EURO-GANEX process is one of the most promising options to achieve the goal of minor actinides recovery. Improvements made to EURO-GANEX system have resulted in the emergence of the so-called New EURO-GANEX process, where the composition of the solvent has been modified by replacing TODGA and DMDOHEMA with cis-mTDDGA in the organic phase and SO3-Ph-BTP with PyTri-Diol in the aqueous phase in order to resolve important issues. The objective of this work is twofold: evaluate the gamma radiolytic resistance of the new EURO-GANEX process by dynamic irradiation conditions simulating the three main steps of the process, and validate the design of CIEMAT Náyade, CEA Marcel and INL irradiation loop devices since each of them mimics different aspects of the real process. Náyade and the INL loops could irradiate the organic and aqueous phases together, whereas in the CEA loop, the irradiated solvent is recycled continuously inside a platform with several stages of mixer-settlers containing aqueous flows simulating the three main steps of the process. The extraction performances and changes in the composition of the solvent have been analyzed during the irradiation experiment by different techniques: gamma spectrometry and ICP-MS/OES for cations or radioactive tracer extraction, and HPLC-MS to identify and quantify the degradation compounds. Despite some differences between the three-irradiation facilities, this inter-institutional study shows that these three comparative tools provide similar trends in the radiolytic stability of a liquid-liquid extraction system. Favourable extraction results for the different steps are obtained according to the static irradiation studies found in literature. However, the degradation of cis-mTDDGA is appreciable leading to degradation compounds, some of which form precipitates and produce important changes in viscosity, important aspects that must be addressed prior to the successful industrial application of the new EURO-GANEX process.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗