Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Short O–O separation in layered oxide Na 0.67 CoO 2 enables an ultrafast oxygen evolution reaction

The layered oxide Na 0.67 CoO 2 with Na + occupying trigonal prismatic sites between CoO 2 layers exhibits a remarkably high room temperature oxygen evolution reaction (OER) activity in alkaline solution. The high activity is attributed to an unusually short O–O separation that favors formation of peroxide ions by O - –O – interactions followed by O 2 evolution in preference to the conventional route through surface O–OH – species. The dependence of the onset potential on the pH of the alkaline solution was found to be consistent with the loss of H + ions from the surface oxygen to provide surface O - that may either be attacked by solution OH - or react with another O - ; a short O–O separation favors the latter route. The role of a strong hybridization of the O-2 p and low-spin Co III /Co IV π-bonding d states is also important; the OER on other Co III /Co IV oxides is compared with that on Na 0.67 CoO 2 as well as that on IrO 2 .

Wang, Hao↗
DOE OSTI2021

Computation and Comparison of the Stable Northeastern US Marine Boundary Layer

In this work we investigate the behavior of stable marine boundary layers located near the coast of the Northeastern United States. Using the ExaWind large eddy simulation (LES) codes, three stable atmospheric conditions were chosen to match the Cape Wind measurements of Archer et al. with wind speeds of 5 m/s, 10 m/s, and 15 m/s at the 20 m measurement height. The behavior of the stable boundary layers, including mean flow quantities and turbulent statistics, are examined and compared to previous computations of the neutral and unstable offshore boundary layer at the same location. This study also examines the domain and mesh requirements necessary to capture the turbulent scales for the stable offshore boundary layers. Finally, we compare solutions computed using both Nalu-Wind and AMR-Wind solvers, and compare their predicted solutions and performance in this study.

49 EE - Wind and Water Power Program - Wind (EE-4W↗
DOE OSTI2021

Pt Catalysts Modified with Manganese Oxide through Atomic Layer Deposition for CO Oxidation: Establishing a Coating Layer above or below Pt

The effect of atomic layer deposition (ALD) of manganese oxide on CO oxidation over Pt/Al2O3 is investigated. Two types of catalysts with a thin MnOx layer coated on or under the Pt nanoparticles (NPs) are prepared, and a pristine Pt/Al2O3 catalyst is used as a reference sample. The addition of the ALD layers improves the catalyst durability and both catalysts with MnOx exhibit greater stability after thermal aging at 1073-K. Besides, MnOx promotes CO oxidation through active Pt-MnOx interfacial sites, showing a reaction rate up to 35-fold faster than that of unmodified Pt. Interestingly, the CO adsorption ability of the Pt catalysts with MnOx overcoats is greatly suppressed after the high-temperature calcination; however, the reaction rate of CO oxidation is still excellent. This phenomenon is because the uniformly covered MnOx with two atomic layers diminishes the exposed Pt surface, but the reaction near the Pt-MnOx interfacial site still occurs. Our results guide the effective use of ALD, which is actively applied to heterogeneous catalysis, and provide a novel direction to control metal-assisted interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental and computational study of the microporous layer and hydrophobic treatment in the gas diffusion layer of a proton exchange membrane fuel cell

Enabling fuel cell operation at high current density is critical for developing competitive alternative power system to replace internal combustion engine. However, liquid water management continues to be a challenge for high humidity or high current density operation. Water condensation in the porous media hinders efficient oxygen transport to the catalyst layer, which in turns, reduces fuel cell performance. To improve water management capability, the gas diffusion layer is often impregnated with Polytetrafluoroethylene (PTFE) and coated with a thin microporous layer, which have shown to improve fuel cell performance, especially under wet conditions. However, the fundamental mechanism that drives the performance enhancement is still not well understood. In this work, the effects of PTFE impregnation and MPL were studied using both experimental and computational techniques. Both limiting current and polarization tests under dry and wet operating condition are conducted to study the oxygen transport resistance and fuel cell performance. In addition, a 2-D, two-phase, multi-physics PEMFC model is developed to simulate performance and gain a fundamental understanding of local water saturation and oxygen concentration. The combined results show that 5 wt% PTFE impregnation with MPL significantly enhances liquid water management, which enables higher current density operation of a fuel cell.

25 ENERGY STORAGE↗
DOE OSTI2020

Defect-Seeded Atomic Layer Deposition of Metal Oxides on the Basal Plane of 2D Layered Materials

Atomic layer deposition (ALD) on mechanically exfoliated 2D layered materials spontaneously produces network patterns of metal oxide nanoparticles in triangular and linear deposits on the basal surface. The network patterns formed under a range of ALD conditions and were independent of the orientation of the substrate in the ALD reactor. The patterns were produced on MoS 2 or HOPG when either tetrakis(dimethylamido)titanium or bis(ethylcyclopentadienyl)manganese were used as precursors, suggesting that the phenomenon is general for 2D materials. Transmission electron microscopy revealed the presence, prior to deposition, of dislocation networks along the basal plane of mechanically exfoliated 2D flakes, indicating that periodical basal plane defects related to disruptions in the van der Waals stacking of layers, such as perfect line dislocations and triangular extended stacking faults networks, introduce a surface reactivity landscape that leads to the emergence of patterned deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coverage-dependent structures and thermodynamic stability of intercalated Gd layers beneath buffer-layer graphene on SiC(0001)

Electronic properties of two-dimensional (2D) materials are strongly influenced by their atomic arrangements, making the theoretically-aided characterization of experimentally-synthesized 2D structures crucial. Using first-principles density functional theory, we analyze nearly 200 configurations of intercalated Gd layers beneath buffer-layer graphene on SiC(0001) over a Gd coverage range of 0.01 < θ < 1.2. By fully relaxing selectively-constructed configurations at each coverage within a large, low-strain supercell, we determine the coverage dependence of the chemical potential for intercalated Gd structures. Thermodynamically-preferred configurations below θ ≈ 0.8 form single-atom-thick monolayers, while 3D-like or multilayer structures emerge beyond θ ≈ 0.9. Most structures are amorphous-like, including the configuration at the chemical potential minimum around θ ≈ 0.4. In contrast, a strongly stretched Gd(0001)-like monolayer at θ = 1/3 and a nearly perfect Gd(0001) monolayer at θ = 1 are significantly less favorable with 0.16 eV and 0.82 eV higher chemical potentials above the minimum, respectively. Furthermore, the graphene layer decoupled by intercalated Gd near the chemical potential minimum is significantly flatter compared to its morphology above intercalated 3D structures at higher coverages and nearly isolated Gd atoms in the lowest coverage region. In conclusion, these findings align with our experimental results and underscore the need for further research on this unique intercalated system, which holds significant potential for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Facile Strategy to Prepare Poly(ionic liquid)-Coated Solid Polymer Electrolytes through Layer-by-Layer Assembly

The inability of solid polymer electrolytes to preserve strong mechanical strength with high ionic conductivity hinders the commercialization of lithium metal batteries (LMBs). The success of fabricating layer-by-layer (LbL)-assembled electrolytes has realized the application of flexible solid polymer electrolytes in electrochemical devices. Here, we demonstrate a rational strategy to construct solid electrolytes coated with multiple ultrathin layers of polyanions (poly(sodium 4-styrenesulfonate)) and polycations (linear poly(1-butyl-3-(4-vinylbenzyl)-1H-imidazolium chloride) (BVIC)/linear poly(PEG 4 -VIC)/SiO 2 -g-poly(PEG 4 -VIC)) using an LbL assembly method. Poly(ionic liquid) backbones and PEG side groups are employed to facilitate the transport of lithium ions via the segmental motion of the macromolecular matrix. The fabricated free-standing membranes exhibited good ionic conductivities of 9.03–10 × 10 –4 S cm –1 . Furthermore, a Li/LiFePO 4 cell assembled with the LbL-membrane electrolytes exhibits an initial high discharge capacity of 143–158 mAhg –1 at 60 °C with high columbic efficiency. In conclusion, this approach, which combines polymer synthesis and LbL self-assembly, is an effective and facile route to fabricate solid polymer electrolyte membranes with superior ionic conductivity and mechanical robustness, which are useful for electrochemical devices and high-voltage battery applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Exceptional Mineral Scaling Resistance from the Surface Gas Layer: Impacts of Surface Wetting Properties and the Gas Layer Charging Mechanism

Mineral scaling is a phenomenon that occurs on submerged surfaces in contact with saline solutions. In membrane desalination, heat exchangers, and marine structures, mineral scaling reduces process efficiency and eventually leads to process failure. Therefore, achieving long-term scaling resistance is beneficial to enhancing process performance and reducing operating and maintenance costs. While evidence shows that superhydrophobic surfaces may reduce mineral scaling kinetics, prolonged scaling resistance is limited due to the finite stability of the entrained gas layer present in a Cassie–Baxter wetting state. Additionally, superhydrophobic surfaces are not always feasible for all applications, but strategies for long-term scaling resistance with smooth or even hydrophilic surfaces are often overlooked. In this study, we elucidate the role of interfacial nanobubbles on the scaling kinetics of submerged surfaces of varied wetting properties, including those that do not entrain a gas layer. We show that both solution conditions and surface wetting properties that promote interfacial bubble formation enhances scaling resistance. In the absence of interfacial bubbles, scaling kinetics decrease as surface energy decreases, while the presence of bulk nanobubbles enhances the scaling resistance of the surface with any wetting property. The findings in this study allude to scaling mitigation strategies that are enabled by solution and surface properties that promote the formation and stability of interfacial gas layers and provide insights to surface and process design for greater scaling resistance.

calcite↗
DOE OSTI2025

Is There a Scalar Atmospheric Surface Layer Within a Convective Boundary Layer? Implications for Flux Measurements

Top‐down entrainment shapes the vertical gradients of sensible heat, latent heat, and CO 2 fluxes, influencing the interpretation of eddy covariance (EC) measurements in the unstable atmospheric surface layer (ASL). Using large eddy simulations for convective boundary layer flows, we demonstrate that decreased temperature gradients across the entrainment zone increase entrainment fluxes by enhancing the entrainment velocity, amplifying the asymmetry between top‐down and bottom‐up flux contributions. These changes alter scalar flux profiles, causing flux divergence or convergence and leading to the breakdown of the constant flux layer assumption (CFLA) in the ASL. As a result, EC‐measured fluxes either underestimate or overestimate “true” surface fluxes during divergence or convergence phases, contributing to energy balance non‐closure. The varying degrees of the CFLA breakdown are a fundamental cause for the non‐closure issue. These findings highlight the underappreciated role of entrainment in interpreting EC fluxes, addressing non‐closure, and understanding site‐to‐site variability in flux measurements.

eddy covariance fluxes of scalars↗
DOE OSTI2021

Unusual layer-by-layer growth of epitaxial oxide islands during Cu oxidation

Elucidating metal oxide growth mechanisms is essential for precisely designing and fabricating nanostructured oxides with broad applications in energy and electronics. However, current epitaxial oxide growth methods are based on macroscopic empirical knowledge, lacking fundamental guidance at the nanoscale. Using correlated in situ environmental transmission electron microscopy, statistically-validated quantitative analysis, and density functional theory calculations, we show epitaxial Cu 2 O nano-island growth on Cu is layer-by-layer along Cu 2 O(110) planes, regardless of substrate orientation, contradicting classical models that predict multi-layer growth parallel to substrate surfaces. Growth kinetics show cubic relationships with time, indicating individual oxide monolayers follow Frank-van der Merwe growth whereas oxide islands follow Stranski-Krastanov growth. Cu sources for island growth transition from step edges to bulk substrates during oxidation, contrasting with classical corrosion theories which assume subsurface sources predominate. Our results resolve alternative epitaxial island growth mechanisms, improving the understanding of oxidation dynamics critical for advanced manufacturing at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Embedding physics domain knowledge into a Bayesian network enables layer-by-layer process innovation for photovoltaics

Process optimization of photovoltaic devices is a time-intensive, trial-and-error endeavor, which lacks full transparency of the underlying physics and relies on user-imposed constraints that may or may not lead to a global optimum. Herein, we demonstrate that embedding physics domain knowledge into a Bayesian network enables an optimization approach for gallium arsenide (GaAs) solar cells that identifies the root cause(s) of underperformance with layer-by-layer resolution and reveals alternative optimal process windows beyond traditional black-box optimization. Our Bayesian network approach links a key GaAs process variable (growth temperature) to material descriptors (bulk and interface properties, e.g., bulk lifetime, doping, and surface recombination) and device performance parameters (e.g., cell efficiency). For this purpose, we combine a Bayesian inference framework with a neural network surrogate device-physics model that is 100× faster than numerical solvers. With the trained surrogate model and only a small number of experimental samples, our approach reduces significantly the time-consuming intervention and characterization required by the experimentalist. As a demonstration of our method, in only five metal organic chemical vapor depositions, we identify a superior growth temperature profile for the window, bulk, and back surface field layer of a GaAs solar cell, without any secondary measurements, and demonstrate a 6.5% relative AM1.5G efficiency improvement above traditional grid search methods.

14 SOLAR ENERGY↗
DOE OSTI2020

The sensitive surface chemistry of Co-free, Ni-rich layered oxides: identifying experimental conditions that influence characterization results

Recent studies have suggested that Co-free, Ni-rich layered cathodes (e.g., doped LiNiO2) can provide promising battery performance for practical applications. However, these layered cathodes suffer from significant surface instability during various stages of the sample history, which generates inherent challenges for achieving stable battery performance and obtaining statistically representative characterization results. To reliably report the surface chemistry of these materials, delicate controls of stepwise sample preparation are required. In this study, we aim to reveal how the surface chemistry of LiNiO2 based materials changes with various environments, including human exhalation, sample storage, sample preparation, electrochemistry cycling, and surface doping. Our results demonstrate that the surface of these materials is highly reactive and prone to alter at various stages of sample handling and characterization. The sensitive surface could impact the interpretation of the surface chemical and structural information, including surface carbonate formation, transition metal reduction and dissolution, and surface reconstruction. Importantly, the heterogeneity of the surface degradation calls for a consolidation of nanoscale, high-resolution characterization, and ensemble-averaged methods in order to improve statistical representation. Furthermore, the doping chemistry can effectively mitigate the surface degradation and improve overall battery performance due to the enhanced surface oxygen retention. Our study highlights the necessity of strict measurements through complementary characterizations at multiple length scales to eliminate unintentional biased conclusions.

surface chemistry, Co-free Ni-rich cathodes, Istab↗
DOE OSTI2020

Chemical approaches to artificial photosynthesis: A molecular, dye-sensitized photoanode for O 2 production prepared by layer-by-layer self-assembly

We describe here the preparation of a family of photoanodes for water oxidation that incorporate an electron acceptor–chromophore–catalyst in single molecular assemblies on nano-indium tin oxide (nanoITO) electrodes on fluorine-doped tin oxide (FTO). The assemblies were prepared by using a layer-by-layer, Atomic Layer Deposition (ALD), self-assembly approach. In the procedure, addition of an electron acceptor viologen derivative followed by a Ru II (bpy) chromophore and a pyridyl derivative of the water oxidation catalyst [Ru(bda) (L) 2 ] (bda = 2,2'-bipyridine-6,6'-dicarboxylate) 2 , were linked by ALD by addition of the bridge precursors TiO 2 , ZrO 2 , and Al 2 O 3 as the bridging groups giving the assemblies, FTO|nanoITO|–MV 2+ –ALD MO 2 –RuP2 2+ –ALD M'O 2 –WOC. In a series of devices, the most efficient gave water oxidation with an incident photon to current efficiency of 2.2% at 440 nm. Transient nanosecond absorption measurements on the assemblies demonstrated that the slow step in the intra-assembly electron transfer is the electron transfer from the chromophore through the viologen bridge to the nanoITO electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗