Ultra-High Thermal Conductivity Magnet Electrical Insulation and Radiation Resistant Aluminum YBCO Cables
Explore the source record for details and available documents.
Kovacs, Chris↗
SEARCH · Engineering Papers
Results for “insulation resistance”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Colossal Density-Driven Resistance Response in the Negative Charge Transfer Insulator MnS 2
A reversible density driven insulator to metal to insulator transition in high-spin MnS 2 is experimentally observed, leading with a colossal electrical resistance drop of $10^8$ Omega by 12 GPa. Density functional theory simulations reveal the metallization to be unexpectedly driven by previously unoccupied $S_{2}^{-2}$ $\sigma^{*}_{3p}$ antibonding states crossing the Fermi level. This is a unique variant of the charge transfer insulator to metal transition for negative charge transfer insulators having anions with an unsaturated valence. By 36 GPa the emergence of the low-spin insulating arsenopyrite ($P2_1/c$) is confirmed, and the bulk metallicity is broken with the system returning to an insulative electronic state.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Measurement of Transverse Resistance for Stacks of Non-insulated REBCO Tapes
Transverse resistance among adjacent conductors is a key parameter to calculate AC losses in superconducting cables with non-insulated conductors. The transverse pressure insert (TPI) previously developed and used at Fermilab was modified to measure transverse resistance of stacks made of non-insulated REBCO tapes as a function of transverse pressure at liquid nitrogen temperature. Pressure up to 322 MPa was applied with a hydraulic cylinder. A small current up to 10 A was flown in the stack sample through REBCO tape leads spliced above and below the stack. The latter had a bending radius larger than 6 mm to prevent the critical current degradation in REBCO leads. The voltage was measured just outside the compressed area. Stack samples included stacks of bare 4-mm wide REBCO tapes, as well as REBCO tapes alternated with 4-mm wide stainless-steel ribbons of 40 μm and 30 μm of thickness. We herein present the results of these transverse resistance measurements. Results show a stronger dependence on pressure for smaller pressure vs. larger ones. Also, of the two components of contact resistance, i.e. contact and bulk, the latter was negligible.
Tamagnini, E. [Turin Polytechnic]↗
Measuring resistance or conductance of insulators
Device protects stable fixture for holding electrodes against specimen conductance or resistance measurement with substantially less labor and expense than previous methods.
May, H. S.↗
Quantum oscillation of thermally activated conductivity in a monolayer WTe 2 -like excitonic insulator
Recently, quantum oscillation of the resistance in insulating monolayer WTe 2 was reported. An explanation in terms of gap modulation in the hybridized Landau levels of an excitonic insulator was also proposed by one of us. However, the previous picture of gap modulation in the Landau levels spectrum was built on a pair of well nested electron and hole Fermi surfaces, while the monolayer WTe 2 has one hole and two electron Fermi pockets with relative anisotropy. In this work we demonstrate that for system like monolayer WTe 2 , the excitonic insulating state arising from the coupled one hole and two electron pockets possesses a finite region in interaction parameter space that shows gap modulation in a magnetic field. In this region, the thermally activated conductivity displays the 1/B periodic oscillation and it can further develop into discrete peaks at low temperature, in agreement with the experimental observation. We show that the relative anisotropy of the bands is a key parameter and the quantum oscillations decrease rapidly if the anisotropy increases further than the realistic value for monolayer WTe 2 .
2-dimensional systems↗
Fast, Accurate, and Reliable Thermal Metrology to Assess the Thermal Resistivity on Small Samples of Thermal Insulation
Developing new insulation materials having a thermal resistivity greater than 69 m K/W (10 hr ft2 °F/Btu/inch) can be appealing for building envelope retrofit and construction of new buildings. Multiple institutions are involved in the development of innovative insulation materials with high thermal resistivity. However, these projects have struggled in the development of new materials due to the difficulty associated with the measurement of small sections of high thermal resistivity materials. As new materials are being developed, the size of each test specimen impacts the cost of development. Given the lack of a reliable method to measure the thermal resistivity on small samples of such materials, we evaluated experimental techniques that can be improved to satisfy the need for testing small sections of high thermal resistivity materials and developed standardized test methods to enable the rapid thermal evaluation of advanced insulation materials. This paper presents the study results and potential techniques for fast, accurate, and reliable effective thermal resistivity measurement on small samples of insulation materials.
Desjarlais, Andre Omer↗
Modeling the Impacts of Material Properties on Oscillatory Neuron Behavior
In this study, neuromorphic computing, which mimics the functions of biological brains, offers improvements in both latency and energy efficiency over typical von Neumann computing architectures. Spiking neural networks can be especially power-efficient because they encode information temporally and can use more sparse electrical inputs. Here, we study the design of volatile memristors (variable resistors with memory) for neuronal devices, with particular consideration toward the feasibility of all-on-chip oscillation using built-in capacitance. We use circuit simulations to model the behavior of oscillator neurons with a range of realistic material properties. We find that energy inputs increase with insulating-phase resistivity, thermal conductivity, and device aspect ratio. However, we also find that the minimum capacitance needed for oscillation decreases with increasing insulating-phase resistivity, which opposes the constraints for power efficiency. Based on published data on NbO 2 , VO 2 , and EuNiO 3 , we find that existing materials can be engineered for all-on-chip spiking using their parasitic capacitance.
36 MATERIALS SCIENCE↗
Doping-driven resistive collapse of the Mott insulator in a minimal model for VO 2
Here we study the resistive collapse of the Mott insulator state in the dimer Hubbard model. This minimal model has been used to describe the physics of VO 2 , and should be relevant to other strongly correlated materials. It incorporates the physics of correlated dimers and the explicit competition between on-site Coulomb repulsion and magnetic exchange interactions. Our results unveil that between the Mott insulator at half filling and the Fermi liquid metal at high doping there is an intermediate bad metallic phase with exotic features such as a pseudogap, orbital selectivity, and a first-order metal-metal transition. The model is solved within dynamical mean field theory by means of quantum Monte Carlo, which provides the numerically exact solution of the model in the limit of large lattice dimensionality. This model can be considered as a minimal one that captures exotic phenomena associated to the physics of a doped Mott insulator, shading light on their basic physical mechanism.
36 MATERIALS SCIENCE↗
Topological surface conduction in Kondo insulator YbB 12
Kondo insulators have recently aroused great interest because they are promising materials that host a topological insulator state caused by the strong electron interactions. Moreover, recent observations of the quantum oscillations in the insulating state of Kondo insulators have come as a great surprise. Here, we investigate the surface electronic state of a prototype Kondo insulator YbB 12 , we measured the transport properties of single crystals and microstructures. In all samples, the temperature dependence of the electrical resistivity is insulating at high temperatures and the resistivity exhibits a plateau at low temperatures. The magnitude of the plateau value decreases with reducing sample thickness, which is quantitatively consistent with the surface electronic conduction in the bulk insulating YbB 12 . Moreover, the magnetoresistance of the microstructures exhibits a weak-antilocalization effect at low field. These results are consistent with the presence of a topologically protected surface state, suggesting that YbB 12 is a candidate material for a topological Kondo insulator. The high field resistivity measurements up to µ 0 H = 50 T of the microstructures provide supporting evidence that the quantum oscillations of the resistivity in YbB 12 occurs in the insulating bulk.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Dielectric properties of neutron and proton irradiated polymeric nanocomposite insulation for superconducting magnets of fusion power plants
Studies on radiation-resistant electrical insulation for superconducting magnets of nuclear fusion power plants are discussed. Metal oxide nanoparticle-incorporated organic polymer composite (MONAP) insulation films were manufactured and studied for their dielectric breakdown strength after exposure to neutrons and proton radiation at varying levels. Samples with up to 5 wt% of nanoparticles (NPs) of SiO 2 , MgO, and ZrO 2 were studied. The samples were exposed to radiation of up to 2 × 10 16 neutrons/cm 2 and 200 Mrad of protons. The addition of the nanoparticles improved the radiation resistance of the MONAP, and the performance depended on the type of NPs and the radiation exposure. Dielectric breakdown measurements at 77 K showed little degradation. Enhancement of dielectric strength was observed in some instances.
36 MATERIALS SCIENCE↗
Sprayable Aerogel Bead Compositions With High Shear Flow Resistance and High Thermal Insulation Value
A sprayable aerogel insulation has been developed that has good mechanical integrity and lower thermal conductivity than incumbent polyurethane spray-on foam insulation, at similar or lower areal densities, to prevent insulation cracking and debonding in an effort to eliminate the generation of inflight debris. This new, lightweight aerogel under bead form can be used as insulation in various thermal management systems that require low mass and volume, such as cryogenic storage tanks, pipelines, space platforms, and launch vehicles.
Ou, Danny↗
Super-hydrophobic, thermally insulating, thermal-shocks resistant well cement composites for completion of geothermal wells at hydrothermal temperatures of up to 300° C
A well cement composite and a method for making a well cement composite includes a mixture of calcium aluminate cement (CAC) and fly ash cenospheres (CS) in a weight ratio of from 30:70 to 80:20 CAC to CS; sodium metasilicate (SMS) in an amount of from 1 to 10% of the total weight of the mixture of CAC and CS; polymethylhydrosiloxane (PMHS) in an amount of from 0.5 to 6.0% of the total weight of the mixture of CAC and CS; and water in a weight ratio of from 0.5:1.0 to 1.2:1.0 of water to CAC and CS.
Pyatina, Tatiana↗
Metallic surface states in a correlated d-electron topological Kondo insulator candidate FeSb 2
The resistance of a conventional insulator diverges as temperature approaches zero. The peculiar low-temperature resistivity saturation in the 4f Kondo insulator (KI) SmB 6 has spurred proposals of a correlation-driven topological Kondo insulator (TKI) with exotic ground states. However, the scarcity of model TKI material families leaves difficulties in disentangling key ingredients from irrelevant details. Here we use angle-resolved photoemission spectroscopy (ARPES) to study FeSb 2 , a correlated d-electron KI candidate that also exhibits a low-temperature resistivity saturation. On the (010) surface, we find a rich assemblage of metallic states with two-dimensional dispersion. Measurements of the bulk band structure reveal band renormalization, a large temperature-dependent band shift, and flat spectral features along certain high-symmetry directions, providing spectroscopic evidence for strong correlations. Our observations suggest that exotic insulating states resembling those in SmB 6 and YbB 12 may also exist in systems with d instead of f electrons.
36 MATERIALS SCIENCE↗
Insulation Blankets for High-Temperature Use
Insulating blanket resists temperatures up to 1,500 degrees F (815 degrees C). Useful where high-temperature resistance, flexibility, and ease of installation are important - for example, insulation for odd-shaped furnaces and high-temperature ducts, curtains for furnace openings and fire control, and conveyor belts in hot processes. Blanket is quilted composite consisting of two face sheets: outer one of silica, inner one of silica or other glass cloth with center filling of pure silica glass felt sewn together with silica glass threads.
Goldstein, H.↗
Proposed Modifications to Engineering Design Guidelines Related to Resistivity Measurements and Spacecraft Charging
A key parameter in modeling differential spacecraft charging is the resistivity of insulating materials. This determines how charge will accumulate and redistribute across the spacecraft, as well as the time scale for charge transport and dissipation. Existing spacecraft charging guidelines recommend use of tests and imported resistivity data from handbooks that are based principally upon ASTM methods that are more applicable to classical ground conditions and designed for problems associated with power loss through the dielectric, than for how long charge can be stored on an insulator. These data have been found to underestimate charging effects by one to four orders of magnitude for spacecraft charging applications. A review is presented of methods to measure the resistive of highly insulating materials, including the electrometer-resistance method, the electrometer-constant voltage method, the voltage rate-of-change method and the charge storage method. This is based on joint experimental studies conducted at NASA Jet Propulsion Laboratory and Utah State University to investigate the charge storage method and its relation to spacecraft charging. The different methods are found to be appropriate for different resistivity ranges and for different charging circumstances. A simple physics-based model of these methods allows separation of the polarization current and dark current components from long duration measurements of resistivity over day- to month-long time scales. Model parameters are directly related to the magnitude of charge transfer and storage and the rate of charge transport. The model largely explains the observed differences in resistivity found using the different methods and provides a framework for recommendations for the appropriate test method for spacecraft materials with different resistivities and applications. The proposed changes to the existing engineering guidelines are intended to provide design engineers more appropriate methods for consideration and measurements of resistivity for many typical spacecraft charging scenarios.
Dennison, J. R.↗
Climate benefits and building energy efficiency gains from improved roofing insulation in cold climates
The high thermal resistivity of polyisocyanurate insulation is attributed to its closed cell structure that is filled with low-thermal-conductivity blowing agent vapor. However, existing polyisocyanurate products exhibit a decrease in their thermal-resistance values at lower temperatures due to the condensation of the blowing agent vapor. Because use of insulation with higher thermal resistivity can lead to improved energy efficiency of commercial buildings, which results in lower operational greenhouse gas emissions, there is a clear need to address this reduced performance at lower temperatures through product innovation.
54 ENVIRONMENTAL SCIENCES↗
Better Modeling of Electrostatic Discharge in an Insulator
An improved mathematical model has been developed of the time dependence of buildup or decay of electric charge in a high-resistivity (nominally insulating) material. The model is intended primarily for use in extracting the DC electrical resistivity of such a material from voltage -vs.- current measurements performed repeatedly on a sample of the material over a time comparable to the longest characteristic times (typically of the order of months) that govern the evolution of relevant properties of the material. This model is an alternative to a prior simplistic macroscopic model that yields results differing from the results of the time-dependent measurements by two to three orders of magnitude.
Pekov, Mihail↗
High temperature resistant cermet and ceramic compositions
Cermet compositions having high temperature oxidation resistance, high hardness and high abrasion and wear resistance, and particularly adapted for production of high temperature resistant cermet insulator bodies are presented. The compositions are comprised of a sintered body of particles of a high temperature resistant metal or metal alloy, preferably molybdenum or tungsten particles, dispersed in and bonded to a solid solution formed of aluminum oxide and silicon nitride, and particularly a ternary solid solution formed of a mixture of aluminum oxide, silicon nitride and aluminum nitride. Also disclosed are novel ceramic compositions comprising a sintered solid solution of aluminum oxide, silicon nitride and aluminum nitride.
Phillips, W. M.↗