Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “injection rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Historical evidence for a connection between volcanic eruptions and climate change

The times of historical volcanic aerosol clouds were compared with changes in atmospheric temperatures on regional, hemispheric, and global scales. These involve either a direct comparison of individual significant eruption years with temperature records, or a comparison of eruption years with composited temperature records for several years before and after chosen sets of eruptions. Some studies have challenged the connection between individual eruptions and climate change. Mass and Portman (1989) recently suggested that the volcanic signal was present, but smaller than previously thought. In a study designed to test the idea that eruptions could cause small changes in climate, Hansen and other (1978) chose one of the best monitored eruptions at the time, the 1963 eruption of Agung volcano on the island of Bali. Using a simple radiation-balance model, in which an aerosol cloud in the tropics was simulated, this basic pattern of temperature change in the tropics and subtropics was reproduced. There may be natural limits to the atmospheric effects of any volcanic eruption. Self-limiting physical and chemical effects in eruption clouds were proposed. Model results suggest that aerosol microphysical processes of condensation and coagulation produce larger aerosols as the SO2 injection rate is increased. The key to discovering the greatest effects of volcanoes on short-term climate may be to concentrate on regional temperatures where the effects of volcanic aerosol clouds can be amplified by perturbed atmospheric circulation patterns, especially changes in mid-latitudes where meridional circulation patterns may develop. Such climatic perturbations can be detected in proxy evidence such as decreases in tree-ring widths and frost damage rings in climatically sensitive parts of the world, changes in treelines, weather anomalies such as unusually cold summers, severity of sea-ice in polar and subpolar regions, and poor grain yields and crop failures.

Rampino, Michael R.↗
NASA NTRS1990

Dispersal of gases generated near a lunar outpost

The dispersal of gases evolved by prospective lunar base operations is presently modeled analytically using continuous (mining and habitat-venting) and impulsive (primarily rocket exhaust) injections of gases. In the case of impulsive injection, the neutral atmosphere and associated ionosphere both decay on time-scales of about 20 min; in that of continuous injection, the atmosphere near the base grows and achieves a steady state after about 20 min. Both direct and diffusive transport mechanisms are considered, and it is concluded that for the injection rates and assumptions presently employed the artificial lunar atmospheres produced are not significantly detrimental to astronomical observations and high-vacuum materials processing operations.

Burns, Jack O.↗
NASA NTRS1991

DD 13 - A very young and heavily reddened early O star in the Large Magellanic Cloud

This paper investigates the Large Magellanic Cloud star DD 13, which is likely the major ionizing source of the nebula N159A. New optical spectroscopy and new estimates of the broadband photometric properties of DD 13 are obtained. A spectral type of O3-O6 V, E(B-V) = 0.64, and M(V) = -6.93 is found. The spectral type cannot be more precisely defined due to contamination of the spectral data by nebular emission, obliterating the important He I classification lines. These results, plus a published estimate of the Lyman continuum photon injection rate into N159A, suggest that DD 13 actually consists of about 2-4 young, early O stars still enshrouded by their natal dust cloud. The star DD 13 may be a younger example of the type of tight cluster represented by the LMC 'star' Sk-66 deg 41, recently revealed to be composed of six or more components.

Conti, Peter S.↗
NASA NTRS1992

Gamma-ray bursts and cosmic rays from accretion-induced collapse

It is shown that the birth of naked or nearly naked neutron stars in accretion-induced collapse or in the bare collapse of white dwarfs can produce cosmological gamma-ray bursts and can provide the required injection rate of cosmic rays into the interstellar space. It is estimated that most of the e(+)e(-) pairs annihilate in flight on a short time scale in the vicinity of the neutron star. It is shown that the gamma-ray bursts, the 0.511 MeV Galactic annihilation radiation, and the cosmic rays exclude the possibility that the large uncertainties in the Galactic pulsar birthrate and the Galactic SN II explosion rate would allow a significant contribution to the pulsar birthrate from naked or nearly naked neutron star formation. The upper bound on the Galactic birthrate of naked or nearly naked neutron stars of less than 1 in 1000 yr makes it very unlikely that a neutrino burst unaccompanied by optical emission from the birth of a naked or nearly naked neutron star will be detected in the near future by underground neutrino telescopes.

Dar, Arnon↗
NASA NTRS1992

An artificially generated atmosphere near a lunar base

We discuss the formation of an artificial atmosphere generated by vigorous lunar base activity in this paper. We developed an analytical, steady-state model for a lunar atmosphere based upon previous investigations of the Moon's atmosphere from Apollo. Constant gas-injection rates, ballistic trajectories, and a Maxwellian particle distribution for an oxygen-like gas are assumed. Even for the extreme case of continuous He-3 mining of the lunar regolith, we find that the lunar atmosphere would not significantly degrade astronomical observations beyond about 10 km from the mining operation.

Burns, Jack O.↗
NASA NTRS1991

A model for the evaporation of clusters of drops embedded in jet vortices. I - Steady injection of identical clusters

A model is developed for describing the interaction of vortex-drop clusters in a flowing gaseous jet, convecting downstream from an injection location. Results are presented for a stationary case representing the situation when identical clusters are continuously injected and the injection rate is constant. The results indicate that, in a rich mixture high-drop-number density regime, the mass evaporated from the drops controls the velocity of the cluster-in-vortex as it propagates downstream.

Bellan, J.↗
NASA NTRS1994

Kinematic structure of the 30 Doradus giant H II region

We have used the echelle CCD spectrograph on the Cerro Tololo Inter-American Observatory (CTIO) 4 m telescope to map the nebular velocity field in the 30 Doradus giant H II region. The kinematics of 30 Dor are very complex. The outer regions are charaterized by a smooth velocity field, but its turbulent velocity, 30-40 km/s Full Width Half Maximum (FWHM), is considerably higher than those in most smaller H II regions. In the central 9 min core, multiple velocity components are observed at most positions. The velocity field is dominated by a large number of expanding structures, ranging in size from 1 to 100 pc and expansion velocities of 20-200 km/s, and often organized into large hierarchical networks. The integral of these complex expanding structures in 30 Dor produces a surprisingly simple profile with a broad Gaussian core and faint extended wings. Several fast-expanding shells, with diameters of 2-20 pc, expansion velocities of 100-300 km/s, and kinetic energies of 0.5-10 x 10(exp 50) ergs have been identified. The large fast-expanding shells and networks are coincident with extended X-ray sources and are probably associated with supernova remnants embedded in supershells produced by the combined effects of stellar winds and supernovae from OB associations. We have used the intensity-calibrated echelle spectra to determine the basic physical and dynamical properties of the kinematic features in 30 Dor. The expanding shells contain roughly half of the kinetic energy in the 30 Dor complex, and this energy is several times higher than the gravitational binding energy of the region. The energetic requirements of the gas are consistent with the observed stellar content of 30 Dor, if the gas is accelerated by a combination of stellar winds and supernovae. Extrapolating the current energy injection rate in the nebula over the lifetime of the OB complex suggest that 30 Dor and its vicinity will evolve into a supergiant shell as seen in the LMC and other nearby galaxies.

Chu, You-Hua↗
NASA NTRS1994

Neutrino bursts from gamma-ray bursts

If gamma-ray bursts originate at cosmological distances, as strongly indicated by the results from Burst and Transient Source Experiment (BATSE) on the Compton Gamma-Ray Observatory (CGRO), then ultrarelativistic ejecta are the likely consequence of the highly super-Eddington luminosity of the sources. If the energy injection rate varies with time, then the Lorentz factor of the wind also varies, and the shells of ejected matter collide with each other. The collisions between baryons produce pions which decay into high-energy photons, electrons, electron positron pairs, and neutrino pairs. The bulk Lorentz factor of approximately 300 is required if our model is to be compatible with the observed millisecond variability. The strongest gamma-ray bursts are observed to deliver approximately 10(exp -4) ergs/sq cm in 100-200 keV photons. In our scenario more energy may be delivered in a neutrino burst. Typical neutrinos may be approximately 30 GeV if the protons have a Maxwellian energy distribution, and up to approximately TeV if the protons have a power-law distribution. Such neutrino bursts are close to the detection limit of the DUMAND II experiment.

Paczynski, Bohdan↗
NASA NTRS1993

Simulations of particle acceleration in parallel shocks: Direct comparison between Monte Carlo and one-dimensional hybrid codes

We have made a direct comparison between two different computer simulations of a plane, parallel, collisionless shock including particle acceleration to energies typical of those of diffuse ions observed at the earth bow shock. Despite the fact that the one-dimensional hybrid and Monte Carlo techniques employ entirely different algorithms, they give surprisingly close agreement in the overall shapes of the complete distribution functions for protons as well as heavier ions. Both methods show that energetic ions emerge smoothly from the background thermal plasma with approximately the same relative injection rate and that the fraction of the incoming plasma's energy flux that is converted into downstream enthalpy flux of the accelerated population (i.e., the acceleration efficiency) is similar in the two cases. The fraction of the downstream proton distribution made up of superthermal particles is quite large, with at least 10% of the energy flux going into protons with energies above 10 keV. In addition, an upstream precursor, produced by backstreaming energetic particles, is present in both shocks, although the Monte Carlo precursor is considerably longer than that produced in the hybrid shock. These results offer convincing evidence that, at least in these ways, the two simulations are consistent in their description of parallel shock structure and particle acceleration, and they lay the groundwork for development of shock models employing a combination of both methods.

Ellison, Donald C.↗
NASA NTRS1959

Exploratory Investigation of Aerodynamic Flameholders for Afterburner Application

An investigation was conducted to determine the flameholding capabilities of aerodynamic jets at afterburner operating conditions. Stability data for a number of aerodynamic flameholders were obtained in a 5- by 5-inch test section at inlet-air reference velocities up to 600 feet per second, an inlet-air temperature of 1250 F, and a combustor-inlet pressure of 15 inches of mercury absolute. Combustion efficiency and stability data of the more promising combinations were then obtained in a 10- by 12-inch test section at the same test conditions. Both air and stoichiometric mixtures of fuel and air were used in the jets; mixture flow rates were approximately 1 percent by weight of the total air-flow rate. Injection pressures were limited to values that might be available from compressor-bleed air. At a reference velocity of 600 feet per second, aerodynamic flame-holders alone were unable to maintain a stable flame at injection pressures up to 70 pounds per square inches large reductions in velocity were required to achieve flame stabilization. When the aerodynamic jets were used in combination with a V-gutter flameholder with approximately a 30 percent blocked area, flame stabilization was attained at a velocity of 600 feet per second; however, the combustion efficiencies of the various combinations were no greater than that obtained with the V-gutter alone.

Butze, Helmut F.↗
NASA NTRS1975

Material Response of One-Dimensional, Steady-State Transpiration Cooling in Radiative and Convective Environments

A simplified analytical solution for thermal response of a transpiration-cooled porous heat-shield material in an intense radiative-convective heating environment is presented. Essential features of this approach are "two-flux method" for radiative transfer process and "two-temperature" assumption for solid and gas temperatures. Incident radiative-convective heatings are specified as boundary conditions. Sample results are shown using porous silica with CO2 transpiration and some parameters quantitatively show the effect on this transpiration cooling system. Summarized maps for mass injection rate, porosity and blowing correction factor for radiation are obtained in order to realize such a cooling system.

Kubota, Hirotoshi↗
NASA NTRS2000

Aerothermodynamic Analysis of Stardust Sample Return Capsule with Coupled Radiation and Ablation

An aerothermodynamic analysis of the forebody aeroshell of the Stardust Sample Return Capsule is carried out by using the axisymmetric viscous shock-layer equations with and without fully coupled radiation and ablation. Formulation of the viscous shock-layer equations with shoulder radius as the length scale and implementation of the Vigneron pressure condition allow resolution of the flowfield over the shoulder. With a predominantly supersonic outflow over the shoulder, a globally iterated solution or viscous shock-layer equations can be obtained. The stagnation-point results are obtained along a specified trajectory, whereas detailed calculations along the body are provided at the peak-heating point. The equilibrium calculations with ablation injection are the focus of the present study because of the lack of a general chemical nonequilibrium analysis that accounts for both surface and flowfield effect. The equilibrium calculations also provide a simple way to conserve surface (and flowfield) elemental composition for the current small ablation injection rates, where the surface elemental composition is a mixture of freestream and ablator elements. Therefore, the coupled laminar and turbulent flow solutions with radiation and ablation are obtained by using the equilibrium flow chemistry, whereas a nonequilibrium chemistry model is used for solutions without ablation and turbulence. Various computed results are compared with those obtained by the other researchers.

Gupta, Roop N.↗
NASA NTRS2004

Development of an Intelligent Videogrammetric Wind Tunnel Measurement System

A videogrammetric technique developed at NASA Langley Research Center has been used at five NASA facilities at the Langley and Ames Research Centers for deformation measurements on a number of sting mounted and semispan models. These include high-speed research and transport models tested over a wide range of aerodynamic conditions including subsonic, transonic, and supersonic regimes. The technique, based on digital photogrammetry, has been used to measure model attitude, deformation, and sting bending. In addition, the technique has been used to study model injection rate effects and to calibrate and validate methods for predicting static aeroelastic deformations of wind tunnel models. An effort is currently underway to develop an intelligent videogrammetric measurement system that will be both useful and usable in large production wind tunnels while providing accurate data in a robust and timely manner. Designed to encode a higher degree of knowledge through computer vision, the system features advanced pattern recognition techniques to improve automated location and identification of targets placed on the wind tunnel model to be used for aerodynamic measurements such as attitude and deformation. This paper will describe the development and strategy of the new intelligent system that was used in a recent test at a large transonic wind tunnel.

Graves, Sharon S.↗
NASA NTRS1997

Videometric Applications in Wind Tunnels

Videometric measurements in wind tunnels can be very challenging due to the limited optical access, model dynamics, optical path variability during testing, large range of temperature and pressure, hostile environment, and the requirements for high productivity and large amounts of data on a daily basis. Other complications for wind tunnel testing include the model support mechanism and stringent surface finish requirements for the models in order to maintain aerodynamic fidelity. For these reasons nontraditional photogrammetric techniques and procedures sometimes must be employed. In this paper several such applications are discussed for wind tunnels which include test conditions with Mach number from low speed to hypersonic, pressures from less than an atmosphere to nearly seven atmospheres, and temperatures from cryogenic to above room temperature. Several of the wind tunnel facilities are continuous flow while one is a short duration blowdown facility. Videometric techniques and calibration procedures developed to measure angle of attack, the change in wing twist and bending induced by aerodynamic load, and the effects of varying model injection rates are described. Some advantages and disadvantages of these techniques are given and comparisons are made with non-optical and more traditional video photogrammetric techniques.

Burner, A. W.↗
NASA NTRS2005

Impact of Fluidic Chevrons on Jet Noise

The impact of alternating fluidic core chevrons on the production of jet noise is investigated. Core nozzles for a representative 1/9th scale, bypass ratio 5 model system were manufactured with slots cut near the trailing edges to allow for air injection into the core and fan streams. The injectors followed an alternating pattern around the nozzle perimeter so that the injection alternated between injection into the core stream and injection into the fan stream. For the takeoff condition and a forward flight Mach number of 0.10, the overall sound pressure levels at the peak jet noise angle decrease with increasing injection pressure. Sound pressure levels increase for observation angles less than 110o at higher injection pressures due to increases in high frequency noise. Greater increases in high frequency noise are observed when the number of injectors increases from 8 to 12. When the forward flight Mach number is increased to 0.28, jet noise reduction (relative to the baseline) is observed at aft angles for increasing injection pressure while significant increases in jet noise are observed at forward observation angles due to substantial acoustic radiation at high frequencies. A comparison between inflow and alternating injectors shows that, for equal mass injection rates, the inflow nozzle produces greater low frequency noise reduction (relative to the baseline) than the alternating injectors at 90o and aft observation angles and a forward flight Mach number of 0.28. Preliminary computational fluid dynamic simulations indicate that the spatial decay rate of the hot potential core flow is less for the inflow nozzle than for the alternating nozzles which indicates that gentle mixing may be preferred over sever mixing when fluidic chevrons are used for jet noise reduction.

Henderson, Brenda S.↗
NASA NTRS1996

Particle Injection in the Cir X-1 radio outbursts

A particle injection model has been applied to the radio outbursts of the X-ray binary Circinus X-1. The radio outbursts of this system have often been observed to exhibit a double peaked structure, i.e., with two apparent consecutive maxima. We show here that particle injection models can account for such observed behavior provided that a time variable particle injection rate is adopted.

stars Circinus X-1 Cir X-1 stars radio radiation o↗
NASA NTRS2008

Computational Investigation of the NASA Cascade Cyclonic Separation Device

Devices designed to replace the absent buoyancy separation mechanism within a microgravity environment are of considerable interest to NASA as the functionality of many spacecraft systems are dependent on the proper sequestration of interpenetrating gas and liquid phases. Inasmuch, a full multifluid Euler-Euler computational fluid dynamics investigation has been undertaken to evaluate the performance characteristics of one such device, the Cascade Cyclonic Separator, across a full range of inlet volumetric quality with combined volumetric injection rates varying from 1 L/min to 20 L/min. These simulations have delimited the general modes of operation of this class of devices and have proven able to describe the complicated vortex structure and induced pressure gradients that arise. The computational work has furthermore been utilized to analyze design modifications that enhance the overall performance of these devices. The promising results indicate that proper CFD modeling may be successfully used as a tool for microgravity separator design.

Hoyt, Nathaniel C.↗
NASA NTRS2011

Gear Mesh Loss-of-Lubrication Experiments and Analytical Simulation

An experimental program to determine the loss-of-lubrication (LOL) characteristics of spur gears in an aerospace simulation test facility has been completed. Tests were conducted using two different emergency lubricant types: (1) an oil mist system (two different misted lubricants) and (2) a grease injection system (two different grease types). Tests were conducted using a NASA Glenn test facility normally used for conducting contact fatigue. Tests were run at rotational speeds up to 10000 rpm using two different gear designs and two different gear materials. For the tests conducted using an air-oil misting system, a minimum lubricant injection rate was determined to permit the gear mesh to operate without failure for at least 1 hr. The tests allowed an elevated steady state temperature to be established. A basic 2-D heat transfer simulation has been developed to investigate temperatures of a simulated gear as a function of frictional behavior. The friction (heat generation source) between the meshing surfaces is related to the position in the meshing cycle, the load applied, and the amount of lubricant in the contact. Experimental conditions will be compared to those from the 2-D simulation.

Handschuh, Robert F.↗