Evaluating the impact of urban morphology configurations on the accuracy of urban canopy model temperature simulations with MODIS
Explore the source record for details and available documents.
Andrew J. Monaghan↗
SEARCH · Engineering Papers
Results for “impact evaluation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Program of policy studies in science and technology
The application of an interdisciplinary, problem-oriented capability to the performance of total social impact evaluations is discussed. The consequences of introducing new configurations, technological or otherwise into future social environments are presented. The primary characteristics of the program are summarized: (1) emphasis on interdisciplinary, problem-oriented analysis; (2) development of intra- and inter-institutional arrangements for the purpose of analyzing social problems, evaluating existing programs, and assessing the social impacts of prospective policies, programs, and other public actions; (3) focus on methodological approaches to the projection of alternative future social environments, the identification of the effects of the introduction of new policies, programs, or other actions into the social system, and the evaluation of the social impacts of such effects; (4) availability of analytical resources for advisory and research tasks, and provision for use of program facilities as a neutral forum for the discussion of public issues involving involving the impact of advancing technology on social value-institutional processes.
Mayo, L. H.↗
Evaluation of the impact response of textile composites
An evaluation of the impact damage resistance and impact damage tolerance of stitched and unstitched uniweaves, 2-D braids, and 3-D weaves was conducted. Uniweave laminates were tested at four thicknesses to determine the sensitivity of the tests to this parameter. Several braid and weave parameters were also varied to establish their velocity (large mass) impacts and then loaded in tension or compression to measure residual strength. Experimental results indicate that stitching significantly improves the uniweaves' damage resistance. The 2-D braids and 3-D weaves offered less damage resistance than the stitched materials. Stitching also improved the compression after impact (CAI) and tension after impact (TAI) strengths of the uniweave materials.
Portanova, M. A.↗
Evaluation of the impact of noise metrics on tiltrotor aircraft design
A subjective noise evaluation was conducted in which the test participants evaluated the annoyance of simulated sounds representative of future civil tiltrotor aircraft. The subjective responses were correlated with the noise metrics of A-weighted sound pressure level, overall sound pressure level, and perceived level. The results indicated that correlation between subjective response and A-weighted sound pressure level is considerably enhanced by combining it in a multiple regression with overall sound pressure level. As a single metric, perceived level correlated better than A-weighted sound pressure level due to greater emphasis on low frequency noise components. This latter finding was especially true for indoor noise where the mid and high frequency noise components are attenuated by typical building structure. Using the results of the subjective noise evaluation, the impact on tiltrotor aircraft design was also evaluated. While A-weighted sound pressure level can be reduced by reduction in tip speed, an increase in number of rotor blades is required to achieve significant reduction of low frequency noise as measured by overall sound pressure level. Additional research, however, is required to achieve comparable reductions in impulsive noise due to blade-vortex interaction, and also to achieve reduction in broad band noise.
Sternfeld, H.↗
Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. Volume 2: Addendum 1
The potential of a common Liquid Rocket Booster (LRB) design was evaluated for use with both the Space Transportation System (STS) and the Advanced Launch System (ALS). A goal is to have a common Liquid Oxygen/Liquid Hydrogen (LO2/LH2) engine developed for both the ALS booster and the core stage. The LO2/LH2 option for the STS was evaluated to identify potential LRB program cost reductions. The objective was to identify the structural impacts to the external tank (ET), and to determine if any significant ET re-development costs are required as a result of the larger LO2/LH2 LRB. The potential ET impacts evaluated are presented.
Source record↗
Towards a flexible framework for community-wide ensemble forecasting tailored for major space environment impacts
To build continuously improving space weather predictive capabilities based on science and enable assessments and rapid implementations of advances in research into source-to-impact modelling systems we need: to assemble parts of the puzzle by solving problems focused on specific physical domains; to identify essential space environment quantities (ESEQs) passed between domains and linked to impacts; evaluate modeling capabilities for each ESEQ; connect all validated solutions from space weather origins on the sun to impacts on humans and critical infrastructure; to design displays for ensemble predictions tailored for major space weather user groups; to build a collaborative environment for efficient sharing of information and capabilities (models/data/expertise) and collaborative development. The presentation will overview existing community-wide space weather forecasting frameworks and research-to-operations pipelines and discuss opportunities to build a collaborative plug-and-play platform for interconnecting predictive capabilities developed under different space weather programs.
space weather↗
Towards A Flexible Framework for Community-Wide Ensemble Forecasting Tailored for Major Space Environment Impacts
To build continuously improving space weather predictive capabilities based on science and enable assessments and rapid implementations of advances in research into source-to-impact modelling systems we need: to assemble parts of the puzzle by solving problems focused on specific physical domains; to identify essential space environment quantities (ESEQs) passed between domains and linked to impacts; evaluate modeling capabilities for each ESEQ; connect all validated solutions from space weather origins on the sun to impacts on humans and critical infrastructure; to design displays for ensemble predictions tailored for major space weather user groups; to build a collaborative environment for efficient sharing of information and capabilities (models/data/expertise) and collaborative development. The presentation will overview existing community-wide space weather forecasting frameworks and research-to-operations pipelines and discuss opportunities to build a collaborative plug-and-play platform for interconnecting predictive capabilities developed under different space weather programs.
space weather↗
NASA experiments onboard the controlled impact demonstration
The structural crashworthiness tests conducted by NASA on the December 1, 1984 controlled impact demonstration are discussed. The components and locations of the data acquisition and photographic systems developed by NASA to evaluate impact loads throughout the aircraft structure and the transmission of loads into the dummies are described. The effectiveness of the NASA designed absorbing seats and the vertical, longitudinal, and transverse impact loads are measured. Data that is extremely applicable to crash dynamics structural research was obtained by the data acquisition system and very low load levels were measured for the NASA energy absorbing seats.
Hayduk, R. J.↗
NASA workshop on impact damage to composites
A compilation of slides presented at the NASA Workshop on Impact Damage to Composites held on March 19 and 20, 1991, at the Langley Research Center, Hampton, Virginia is given. The objective of the workshop was to review technology for evaluating impact damage tolerance of composite structures and identify deficiencies. Research, development, design methods, and design criteria were addressed. Actions to eliminate technology deficiencies were developed. A list of those actions and a list of attendees are also included.
Poe, C. C., Jr.↗
Reviewing Benefits and Costs of Hydropower Development Evidence From the Lower Mekong River Basin
In this paper, we examine the benefits and costs of hydropower development in the Mekong River Basin. We compare four major reports—the Mekong River Commission's (MRC's) Basin Development Plan Programme, Phase 2 (BDP2), the Strategic Environmental Assessment of Hydropower on the Mekong Mainstream (SEA), the Study on the Impacts of Mainstream Hydropower on the Mekong River (MDS), and the MRC's recent council study (CS)—in order to provide the basis for a comparative analysis of the major impact evaluation literature on mainstream dam construction in the Mekong River Basin for the period of 2010–2018. The primary objective of the review is to identify points of agreement, disagreement, inconsistency, and knowledge gaps. Both Mekong River Commission reports (BDP2 and CS) suggest extensive economic benefits for proposed hydropower development, whereas the SEA and MDS indicate that the net impact would be negative. The projected impacts of hydropower development on fisheries, sediment flows, and ecosystems vary widely both in economic and biophysical terms. However, all four reports point to decreased food security and loss of local livelihoods for millions of people as major concerns related to dam development. While considerable resources have been devoted to producing these important studies, the lack of standardization across reports, especially assumptions and methodologies for economic impacts, frustrates efforts at meaningful comparison of their findings and precludes the prospect of clear analytical outcomes or policy impacts.
Cumulative impact assessment↗
Probabilistic Evaluation of Blade Impact Damage
The response to high velocity impact of a composite blade is probabilistically evaluated. The evaluation is focused on quantifying probabilistically the effects of uncertainties (scatter) in the variables that describe the impact, the blade make-up (geometry and material), the blade response (displacements, strains, stresses, frequencies), the blade residual strength after impact, and the blade damage tolerance. The results of probabilistic evaluations results are in terms of probability cumulative distribution functions and probabilistic sensitivities. Results show that the blade has relatively low damage tolerance at 0.999 probability of structural failure and substantial at 0.01 probability.
Chamis, C. C.↗
Space station integrated wall design and penetration damage control. Task 4: Impact detection/location system
A program to develop a methodology is documented for detecting and locating meteoroid and debris impacts and penetrations of a wall configuration currently specified for use on space station. Testing consisted of penetrating and non-penetrating hypervelocity impacts on single and dual plate test configurations, including a prototype 1.22 m x 2.44 m x 3.56 mm (4 ft x 8 ft x 0.140 in) aluminum waffle grid backwall with multilayer insulation and a 0.063-in shield. Acoustic data were gathered with transducers and associated data acquisition systems and stored for later analysis with a multichannel digitizer. Preliminary analysis of test data included sensor evaluation, impact repeatability, first waveform arrival, and Fourier spectral analysis.
Nelson, J. M.↗
Impact of Simulated Microgravity on Mesenchymal Stem Cell Proliferation
Background Long term exposure to microgravity has adverse effects on human body such as bone loss. Due to the vital role of mesenchymal stem cell (MSC) in bone regeneration, studying MSC under microgravity conditions has been of interest during the past decade. However, high cost and limited access to space flight can dampen enthusiasm of researchers. Microgravity simulators provide a way to investigate the effects of microgravity in human physiology. Methods In this study, we compared MSC cultures under simulated microgravity using random positioning machine (RPM) and Gravite 3D simulators. Two culture durations, 1 week and 2 weeks, were selected for MSC cultures without media change. To evaluate impact of simulated microgravity on cell proliferation, cell counting was performed using trypan blue exclusion assay. Additionally, RNA samples and conditioned media were collected for further analysis. Results After 1 week and 2 weeks, no cell morphology change was observed from RPM and Gravite cultures compared to control. Notably, distinct lower cell confluence at the edge of the flasks on the RPM was observed, which could be caused by fluid sheer forces. MSCs cultured on both microgravity simulators showed decreased cell proliferation after 1-week culture. After 2-week culture, cells grown on the RPM showed no significant difference in cell proliferation compared with control while cells cultured on the Gravite bioreactor showed significantly enhanced MSC proliferation. Conclusion Type of microgravity simulator and duration of culture significantly affect MSC proliferation. Further investigation into how simulated microgravity influences MSC gene expression and cytokine secretion related to bone loss is currently on going in our lab.
Cuiping Zhang↗
Launch Pad Flame Trench Refractory Materials
The launch complexes at NASA's John F. Kennedy Space Center (KSC) are critical support facilities for the successful launch of space-based vehicles. These facilities include a flame trench that bisects the pad at ground level. This trench includes a flame deflector system that consists of an inverted, V-shaped steel structure covered with a high temperature concrete material five inches thick that extends across the center of the flame trench. One side of the "V11 receives and deflects the flames from the orbiter main engines; the opposite side deflects the flames from the solid rocket boosters. There are also two movable deflectors at the top of the trench to provide additional protection to shuttle hardware from the solid rocket booster flames. These facilities are over 40 years old and are experiencing constant deterioration from launch heat/blast effects and environmental exposure. The refractory material currently used in launch pad flame deflectors has become susceptible to failure, resulting in large sections of the material breaking away from the steel base structure and creating high-speed projectiles during launch. These projectiles jeopardize the safety of the launch complex, crew, and vehicle. Post launch inspections have revealed that the number and frequency of repairs, as well as the area and size of the damage, is increasing with the number of launches. The Space Shuttle Program has accepted the extensive ground processing costs for post launch repair of damaged areas and investigations of future launch related failures for the remainder of the program. There currently are no long term solutions available for Constellation Program ground operations to address the poor performance and subsequent failures of the refractory materials. Over the last three years, significant liberation of refractory material in the flame trench and fire bricks along the adjacent trench walls following Space Shuttle launches have resulted in extensive investigations of failure mechanisms, load response, ejected material impact evaluation, and repair design analysis (environmental and structural assessment, induced environment from solid rocket booster plume, loads summary, and repair integrity), assessment of risk posture for flame trench debris, and justification of flight readiness rationale. Although the configuration of the launch pad, water and exhaust direction, and location of the Mobile Launcher Platform between the flame trench and the flight hardware should protect the Space Vehicle from debris exposure, loss of material could cause damage to a major element of the ground facility (resulting in temporary usage loss); and damage to other facility elements is possible. These are all significant risks that will impact ground operations for Constellation and development of new refractory material systems is necessary to reduce the likelihood of the foreign object debris hazard during launch. KSC is developing an alternate refractory material for the launch pad flame trench protection system, including flame deflector and flame trench walls, that will withstand launch conditions without the need for repair after every launch, as is currently the case. This paper will present a summary of the results from industry surveys, trade studies, life cycle cost analysis, and preliminary testing that have been performed to support and validate the development, testing, and qualification of new refractory materials.
Calle, Luz M.↗
AIRNOISE: A Tool for Preliminary Noise-Abatement Terminal Approach Route Design
Noise from aircraft in the airport vicinity is one of the leading aviation-induced environmental issues. The FAA developed the Integrated Noise Model (INM) and its replacement Aviation Environmental Design Tool (AEDT) software to assess noise impact resulting from all aviation activities. However, a software tool is needed that is simple to use for terminal route modification, quick and reasonably accurate for preliminary noise impact evaluation and flexible to be used for iterative design of optimal noise-abatement terminal routes. In this paper, we extend our previous work on developing a noise-abatement terminal approach route design tool, named AIRNOISE, to satisfy this criterion. First, software efficiency has been significantly increased by over tenfold using the C programming language instead of MATLAB. Moreover, a state-of-the-art high performance GPU-accelerated computing module is implemented that was tested to be hundreds time faster than the C implementation. Secondly, a Graphical User Interface (GUI) was developed allowing users to import current terminal approach routes and modify the routes interactively to design new terminal approach routes. The corresponding noise impacts are then calculated and displayed in the GUI in seconds. Finally, AIRNOISE was applied to Baltimore-Washington International Airport terminal approach route to demonstrate its usage.
aircraft noise↗
Computer mapping of LANDSAT data for environmental applications
The author has identified the following significant results. Land cover overlays and maps produced from LANDSAT are providing information on existing land use and resources throughout the 208 study area. The overlays are being used to delineate drainage areas of a predominant land cover type. Information on cover type is also being combined with other pertinent data to develop estimates of sediment and nutrients flows from the drainage area. The LANDSAT inventory of present land cover together with population projects is providing a basis for developing maps of anticipated land use patterns required to evaluate impact on water quality which may result from these patterns. Overlays of forest types were useful for defining wildlife habitat and vegetational resources in the region. LANDSAT data and computer assisted interpretation was found to be a rapid cost effective procedure for inventorying land cover on a regional basis. The entire 208 inventory which include acquisition of ground truth, LANDSAT tapes, computer processing, and production of overlays and coded tapes was completed within a period of 2 months at a cost of about 0.6 cents per acre, a significant improvement in time and cost over conventional photointerpretation and mapping techniques.
Rogers, R. H.↗
Automated predesign of aircraft
Program uses multistation structural-synthesis to size and design box-beam structures for transport aircraft. Program optimizes static strength and scales up to satisfy fatigue and fracture criteria. It has multimaterial capability and library of materials properties, including advanced composites. Program can be used to evaluate impact on weight of variables such as materials, types of construction, structural configurations, minimum gage limits, applied loads, fatigue lives, crack-growth lives, initial crack sizes, and residual strengths.
Poe, C. C., Jr.↗
Initial utility experience with cluster of three Mod-2 wind turbine systems
This paper describes the initial utility experiences of operating three MOD-2s during the Engineering Acceptance Testing. Electrical quantities of bus voltage, phase currents and power are initially being recorded to evaluate impacts to customers on the 69-kV subtransmission line during synchronization and operation of one or more WTSs. To date, effects on the system have been essentially undetectable. Measurements of television signal strengths were taken at an existing television remote pickup and relay station at the WTS site. Potential TV signal interference problems from the WTSs have been avoided by replacing the remote pickups with microwave repeater links for the four TV channels received from Portland, Oregon. Preliminary measurements of audible and sub-audible noise levels indicate that the upwind rotor, tubular tower design of the MOD-2 does not have the pulsing high intensity infrasound problems experienced by the MOD-1 machine at Boone, North Carolina.
Seely, D. B.↗