SEARCH · Engineering Papers
Results for “hydrophilization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Durable and Highly Selective Ion Transport of a Sulfonated Diels Alder Poly(phenylene) for Vanadium Redox Flow Batteries
In order to improve the durability and ion selectivity of a hydrocarbon membrane for vanadium redox flow batteries (VRFBs) a polymer was rationally designed with an external hydrophobic shell and internal hydrophilic core. The polymer was designed to prevent hydrophilic polymer chain aggregation by functionalizing the external polymer shell with hydrophobic side chains and attaching acid moieties onto the polymer backbone. The hydrophobic shell is the result of pentafluorobenzoyl group functionalization on the pendent aryl rings in a Diels Alder poly(phenylene) backbone. The internal polymer chain contains sulfonic acid moieties to impart hydrophilic character. The physical and electrochemical characteristics of the membrane were systematically studied and compared with widely used Nafion-212. The synthesized membranes were found to be superior to Nafion-212 not only in terms of lower vanadium ion permeability (4.25 x 10 -8 vs. Nafion-212: 6.0 x 10 -6 cm 2 min -1 ) but also in higher VRFB performance (EE = 89% and vs. Nafion-212: 85.5% at 40 mA/cm 2 ). The membrane also showed over three times higher capacity retention than Nafion-212 (0.075 % vs. 0.25 % capacity loss per cycle respectively) and excellent ex situ and in situ chemical stability.
Multistage Condensation Pathway Minimizes Hysteresis in Water Harvesting with Large-Pore Metal–Organic Frameworks
Metal-organic frameworks (MOFs) have emerged as promising materials for atmospheric water harvesting (AWH). Large-pore MOFs provide high water capacity, but their significant hysteresis between sorption and desorption makes them unsuitable for AWH. Co2Cl2(BTDD) is a noteworthy exception. This MOF has large, 2.2 nm diameter one-dimensional pores, and combines both record-high water capacity and minimal hysteresis, making it an excellent material for water capture in arid areas. Sorption reversibility in Co2Cl2(BTDD) has been attributed to continuous water uptake. However, the sharp adsorption/desorption in the isotherms supports a discontinuous first-order transition. Here we use molecular simulations to compute the water adsorption and desorption pathways and isotherms in a Co2Cl2(BTDD) model, to elucidate how does this MOF achieve reversibility despite its large pore size. The simulations reveal a multi-stage mechanism of discontinuous water uptake facilitated by spatial segregation of rows of hydrophilic metal sites bridged by ~1 nm hydrophobic ligands. The multi-stage mechanism breaks the barrier of capillary condensation into smaller, easier to surmount ones, resulting in a facile process despite the sharp density discontinuity between confined liquid and vapor. Our results explain why exchanging Co2+ for Ni2+ or Clfor F- in the MOF have minimal impact on the condensation and desorption pressures. On the other hand, we predict that a decrease in hydrophilicity of the MOF vertices would strongly increase the hysteresis. We expect that the relationships between spatial distribution of hydrophilic sites and hysteresis unraveled in this study assist the design of water harvesting materials with maximal capacity and reversibility.
Ether Cleavage Decreases the Ion Exchange Capacity of Anion Exchange Membranes
Anion exchange membranes (AEMs) are integral to fuel cells and water electrolysis systems but suffer from poor durability under alkaline conditions. Ether cleavage is an important failure pathway of poly(arylene ether)-based AEMs that compromises both mechanical stability and ion transport. While this degradation pathway is often studied in terms of polymer fragmentation, the role of newly formed hydrophilic groups has been largely overlooked. Here, we show that polymer scission leads to reduced mechanical rigidity, while the introduction of hydrophilic groups partially mitigates this loss. Under alkaline conditions, phenoxide groups formed during ether cleavage neutralize the polymer cations, leading to a previously unreported loss of ion exchange capacity (IEC). This IEC loss mechanism exacerbates the reduction in ionic conductivity, emphasizing the severity of ether cleavage as a degradation pathway. Recognizing that ether cleavage introduces significant chemical changes beyond polymer fragmentation provides critical insights into its interplay with other degradation mechanisms, such as the direct reduction of cationic sites by E2 and S N 2, and provides molecular-level interpretations for the concurrent effects of polymer scission and increased hydrophilicity on membrane performance.
Processing-Dependent Structure and Poroelasticity of Nafion in Liquid Water
Ionomers act as the solid polymer electrolyte membrane in many modern electrochemical devices, yet the role of their nanostructure in modulating the poroelastic response remains poorly understood, especially in liquid water, where few techniques can measure simultaneous transport-mechanical properties. Poroelastic Relaxation Indentation (PRI) is uniquely suited for measuring time-dependent transport-mechanical properties of porous solids, specifically hydraulic diffusivity, elastic modulus, Poisson’s ratio, and intrinsic permeability, for porous solids. While ionomers such as Nafion are not porous in the typical sense, Nafion has a nanophase-segregated structure that, when fully swollen in liquid water, behaves as a poroelastic solid with a coupled mechanical-transport response. Using a poroelastic framework, we investigate how casting and pretreatment of Nafion membranes alter their poroelastic response in liquid environments. We characterize both extruded and dispersion-cast Nafion membranes pretreated in water at 25 or 100 °C and relate the mechanical-transport properties to the ionomer structure via hydrophilic and intercrystalline domain spacing measured using Small-Angle X-ray Scattering (SAXS). At 25 °C, dispersion-cast membranes exhibit distinctly lower hydraulic diffusivity and intrinsic permeability than extruded membranes but with comparable mechanical properties. Pretreatment at 100 °C increases hydrophilic domain spacing, improving transport but at the expense of mechanical stiffness. Dispersion-cast membranes respond more strongly to pretreatment than extruded membranes. Using the Carman-Kozeny pore network model and the hydrophilic domain-spacing, we estimate the pore radius and tortuosity to show how pretreatment reduces structure-related tortuosity differences between dispersion-cast and extruded membranes. Here, in this work, we show that nanophase-segregated materials such as Nafion can be rigorously characterized using poroelasticity, resulting in physically meaningful transport-mechanical properties. Coupling PRI with SAXS provides insights into the nanostructural features that govern the coupled mechanical-transport response. By establishing PRI for a nanophase-segregated material, this approach opens avenues for this technique’s application in other hydrated polymeric materials not typically considered to be poroelastic.
Hydrophobic Metal–Organic Frameworks Enable Superior High-Pressure Ammonia Storage through Geometric Design
Hydrophobic metal–organic frameworks (MOFs) are typically overlooked for ammonia storage due to weak host–guest interactions. Here, we demonstrate that four structurally analogous aluminum-based MOFs exhibit a counterintuitive behavior whereby framework geometry, rather than ligand hydrophilicity, determines high-pressure NH 3 adsorption performance. The hydrophobic CAU-23 achieved an exceptional capacity matching hydrophilic analogs despite its poor low-pressure uptake. This pressure-dependent enhancement stems from the unique 4-cis-4-trans geometry of CAU-23 compared to the purely cis arrangement of MIL-160 and KMF-1 and the alternating cis-trans configuration of MOF-303. Critically, CAU-23 retained 95% capacity over three high-pressure cycles, whereas hydrophilic MOFs suffered 39–46% irreversible losses due to strong NH 3 -framework interactions that compromise structural integrity. Grand canonical Monte Carlo simulations reveal that high pressure enables NH 3 clustering through intermolecular hydrogen bonding, bypassing the need for strong host–guest interactions. High-pressure powder X-ray diffraction measurements confirm the exceptional mechanical resilience of CAU-23, showing complete structural recovery upon decompression despite exhibiting the highest pressure sensitivity among the studied MOFs. An extended analog, HE-CAU-23, validates this design principle with further enhanced capacity. Furthermore, these findings reveal a paradigm shift toward hydrophobic MOFs with optimized geometry for high-performance and regenerable gas storage applications.
Interfacial Inversion of Stealth Surfactants
Amphiphilic macromolecular surfactants segregate to liquid–liquid interfaces, thereby reducing the interfacial tension and free energy. Here, we investigated “stealth surfactants” in the form of core–shell bottlebrush polymers comprised of pH-responsive diblock copolymer side chains forming a hydrophilic core and a hydrophobic shell, enabling solubility in oil. At liquid–liquid interfaces, these polymers undergo a structural “inversion”, with hydrophilic blocks segregating into the aqueous phase and hydrophobic blocks residing in the oil phase. The reconfiguration kinetics and surfactant properties are influenced by multiple factors, including the molecular weights of the backbone and side chain components, the hydrophilic-to-hydrophobic balance of the side chains, and the pH of the aqueous phase. An observed nonmonotonic dependence of interfacial tension with time is attributed to a progressive structural inversion, where the projected area of the macromolecule onto the interface decreases. To validate this inversion hypothesis, interfacial properties were characterized by sum-frequency generation vibrational spectroscopy, which revealed configurational changes of the core–shell bottlebrush polymers at the fluid interface and revealed a pH-dependent interfacial coverage. Coarse-grained molecular dynamics simulations supported these experimental findings, showing that the pH-responsive core and hydrophobic shell assume a time-averaged configuration with orientations parallel and perpendicular to the plane of the interface, respectively. These findings open routes to design multistimuli-responsive polymeric surfactants and compatibilizers, expanding their potential applications in advanced interfacial systems.
Guiding light via slippery liquid-infused porous surfaces
Slippery liquid-infused porous surfaces (SLIPSs) have been explored for many applications, taking advantage of their highly non-wetting property. In this work, we explore the SLIPS as a cladding material for waveguiding. SLIPSs are prepared by infusing perfluoropolyether oil to hydrophobized nanoporous surfaces of silicon. Power loss and transmission efficiency of an HeNe laser (1.82 mW and 632.8 nm) with varying incident angles were measured through microchannels consisting of the SLIPSs as cladding layers (noil = 1.30) and water (nwater = 1.33) as a core, compared to other cladding types including a planar silicon surface and the nanoporous surfaces in hydrophilic (Wenzel state) and hydrophobic (Cassie–Baxter state) conditions with no oil infused. Agreeing with Snell's law, a total internal reflection occurs at the incident angle as high as 14° for the SLIPSs. The waveguide loss at 14° is only 1.8 dB/cm for the SLIPSs, while those for planar silicon, hydrophilic nanoporous, and hydrophobic nanoporous surfaces are 5.9, 7.4, and 4.9 dB/cm, respectively. The power transmission efficiency of the SLIPSs is independent of the porosity because the surfaces are fully covered with the oil layer, whereas those of hydrophilic and hydrophobic nanoporous surfaces, whose pores are filled with water and air, respectively, depend on the porosity. The significantly lower power loss and the insensitivity to the surface porosity are advantages of the SLIPSs over the other surfaces and can benefit in waveguiding applications such as optofluidics.
Interplay between Shelf Life and Printability of Silica-Filled Suspensions
Although fumed silica/siloxane suspensions are commonly employed in additive manufacturing technology, the interplay between shelf life, storage conditions, and printability has yet to be explored. In this work, direct ink writing (DIW) was used to print unique three-dimensional structures that required suspensions to retain shape and form while being printed onto a substrate. Suspensions containing varying concentrations of hydrophobic and hydrophilic silica were formulated and evaluated over a time span of thirty days. Storage conditions included low (8%) and high (50%) relative humidity and temperatures ranging from 4 °C to 25 °C. The shelf life of the suspensions was examined by comparing the print quality of pristine and aged samples via rheology, optical microscopy, and mechanical testing. Results showed a significant decrease in printability over time for suspensions containing hydrophilic fumed silica, whereas the printability of suspensions containing hydrophobic fumed silica remained largely unchanged after storage. The findings in this work established the following recommendations for extending the shelf life and printability of suspensions commonly used in DIW technology: (1) higher fumed silica concentrations, (2) low humidity and low temperature storage environments, and (3) the use of hydrophobic fumed silica instead of hydrophilic fumed silica.
Self-Cleaning Highly Porous TiO 2 Coating Designed by Swelling-Assisted Sequential Infiltration Synthesis (SIS) of a Block Copolymer Template
Photocatalytic self-cleaning coatings with a high surface area are important for a wide range of applications, including optical coatings, solar panels, mirrors, etc. Here, we designed a highly porous TiO 2 coating with photoinduced self-cleaning characteristics and very high hydrophilicity. This was achieved using the swelling-assisted sequential infiltration synthesis (SIS) of a block copolymer (BCP) template, which was followed by polymer removal via oxidative thermal annealing. The quartz crystal microbalance (QCM) was employed to optimize the infiltration process by estimating the mass of material infiltrated into the polymer template as a function of the number of SIS cycles. This adopted swelling-assisted SIS approach resulted in a smooth uniform TiO 2 film with an interconnected network of pores. The synthesized film exhibited good crystallinity in the anatase phase. The resulting nanoporous TiO 2 coatings were tested for their functional characteristics. Exposure to UV irradiation for 1 h induced an improvement in the hydrophilicity of coatings with wetting angle reducing to unmeasurable values upon contact with water droplets. Furthermore, their self-cleaning characteristics were tested by measuring the photocatalytic degradation of methylene blue (MB). The synthesized porous TiO 2 nanostructures displayed promising photocatalytic activity, demonstrating the degradation of approximately 92% of MB after 180 min under ultraviolet (UV) light irradiation. Thus, the level of performance was comparable to the photoactivity of commercial anatase TiO 2 nanoparticles of the same quantity. Our results highlight a new robust approach for designing hydrophilic self-cleaning coatings with controlled porosity and composition.
Biodegradable surfactants and related compositions, methods and systems
Biodegradable surfactants are described, in which an amphiphilic heteroatom containing hydrocarbon optionally comprising at least one counterion (Z), and related compositions, methods and systems. Biodegradable surfactant described herein has an aHLB value in accordance with equation (1): aHLB=20*Gh/(Gh−Gt) (1) wherein Gh is the Group Number of a hydrophilic head portion of the biodegradable surfactant optionally comprising the at least one counterion (Z), and Gt is the Group Number of a hydrophobic tail portion of the biodegradable surfactant. A biodegradable surfactant in the sense of the disclosure can be tuned to a set hydrophilic-lipophilic balance (aHLB) by selectively modifying at least one tuning moiety of the biodegradable surfactants to provide tuned biodegradable surfactants having an increase or decrease in their adjusted hydrophilic-lipophilic balance (aHLB).
Ion-selective membrane for redox flow batteries
A fluoro sulfonated poly(phenylene) was rationally designed with an external hydrophobic shell and internal hydrophilic core in order to improve the durability and ion selectivity of a hydrocarbon membrane for vanadium redox flow batteries (VRFBs). The polymer was designed to prevent hydrophilic polymer chain aggregation by attaching acid moieties onto the polymer backbone, while functionalizing the external polymer shell with hydrophobic side chains to prevent excessive vanadium crossover associated with cation exchange membranes. As an example, the hydrophobic shell can be provided by pentafluorobenzoyl group functionalization of the pendent aryl groups on a Diels Alder poly(phenylene) backbone, while the internal polymer chain can contain sulfonic acid moieties to impart hydrophilic character.
Impacts of Neodymium Complexation on Radiolysis of Tetramethyl Diglycolamide (TMDGA) in Aqueous Solutions
Hydrophilic diglycolamides (DGA) ligands have been explored for use as stripping agents in various lanthanide and actinide partitioning processes.1 The separation of lanthanide fission products and transplutonic actinides can serve multifaceted advantages, in that the separation of neutron poisoning rare earth element (REE) fission products from the minor actinides in used nuclear fuel (UNF) can be mutually beneficial to the fundamental research behind REE separations and UNF separations. Considerable efforts have been devoted to understanding the radiation chemistry of hydrophilic DGAs. However, recent studies with lipophilic DGAs have shown that metal ion complexation can promote significant changes in their radiolytic susceptibility.2,3 These effects have been attributed to various parameters, including delocalization of electron density, the presence of radiolytically more susceptible counter ions, and steric hindrance. As such, it is pivotal for these complexation effects to be more thoroughly probed to establish mechanistic knowledge for their effects on hydrophilic DGA molecules. Here we present a time-resolved electron pulse and accumulated gamma dose irradiation study on neodymium ion complexes of tetramethyl diglycolamide (TMDGA) under aqueous solution conditions. References (1) Rostaing, C.; Poinssot, C.; Warin, D.; Baron, P.; Lorrain, B. Development and Validation of the EXAm Separation Process for Single Am Recycling. Procedia Chem. 2012, 7, 367–373. https://doi.org/doi: 10.1016/j.proche.2012.10.057. (2) Horne, G. P.; Conrad, J. K.; McLachlan, J. R.; Rotermund, B. M.; Cook, A. R.; Celis-Barros, C.; Mezyk, S. P. Impact of Lanthanide Complexation and Temperature on the Chemical Reactivity of N,N,N’,N’-Tetraoctyl Diglycolamide (TODGA) with the Dodecane Radical Cation. Phys. Chem. Chem. Phys. 2023, Under Review. (3) Kimberlin, A.; Saint-Louis, G.; Guillaumont, D.; Camès, B.; Guilbaud, P.; Berthon, L. Effect of Metal Complexation on Diglycolamide Radiolysis: A Comparison between Ex Situ Gamma and in Situ Alpha Irradiation. Phys. Chem. Chem. Phys. PCCP 2022, 24 (16), 9213–9228. https://doi.org/10.1039/d1cp05731f.
Effect of Sulfonation Level on the Percolated Morphology and Proton Conductivity of Hydrated Fluorine-Free Copolymers: Experiments and Simulations
Using all-atom molecular dynamics simulations and a variety of experimental methods, we previously reported on a linear polyethylene with pendant phenyl sulfonated groups precisely on every fifth carbon along the backbone. With increasing relative humidity this fluorine-free polymer self-assembled to form nanoscale water channels and exhibited exceptional proton conductivity. Expanding upon those findings, here we explore partially sulfonated random copolymers, referred to as p 5PhSH-Y. Using either acetyl sulfate or sulfuric acid, a wide range of sulfonation levels were prepared ( Y = 34−98%) corresponding to ion-exchange capacities (IEC) of 2.0−4.4 mmol/g. Combining experimental techniques and all-atom molecular dynamics simulations, we study the effect of Y on water uptake, nanoscale morphology, and the proton/water transport properties of p5PhSH- Y . The proton conductivity of p 5PhSH- Y increases with relative humidity and with Y and achieves values in excess of 0.1 S/cm. These high conductivities are attributed to high IEC and welldeveloped nanoscale percolated hydrophilic domains made possible by the flexible backbone. We quantitatively describe the nature of the water channels using the characteristic distance, channel width distribution, the area per sulfonate group at the hydrophilic/ hydrophobic interface, and the fractal dimension. Notably, the channel widths and the areas per sulfonate group are nominally independent of the level of sulfonation, while depending significantly on the level of hydration. The fractal dimension of the water channels correlates strongly with the water diffusion coefficients calculated from the molecular dynamics (MD) simulations. These findings demonstrate that the p 5PhSH- Y hydrocarbon copolymers can be modified to tune properties, particularly proton conductivity.
Morphology–Diffusivity Relationships in Fluorine-Free Random Terpolymers for Proton-Exchange Membranes
Here, using atomistic molecular dynamics simulations, we investigate the morphology and transport properties of a new family of fluorine-free terpolymers designed as proton-exchange membranes. Simulated random terpolymers consist of three monomers with a 5-carbon backbone with a phenylsulfonate, phenyl, or no pendant group and have ion exchange capacities (IECs) ranging from 1.06–4.14 mmol/g. At a hydration level of 9, cluster analysis reveals macrophase separation between water and terpolymers with IEC < 2.1 mmol/g and continuous, percolated hydrophilic and hydrophobic nanoscale domains at higher IECs. Channel width distribution analysis of the percolated morphologies revealed that more hydrophobic units produce less uniform channels. Decreasing the surface area per sulfonate group and increasing the fractal dimension of the hydrophilic domains correlate with increased water diffusivity, due to a more acidic interface and more isotropic water channels. Relative to the previously studied phenylsulfonate homopolymer, these terpolymers with lower IECs have only modestly lower water diffusion, and we anticipate other advantages related to processability.
Effect of Support on Oxygen Reduction Reaction Activity of Supported Iron Porphyrins
In this work, we report the oxygen reduction reaction (ORR) activity in acid of an Fe porphyrin on different supports. While the activity is high (E 1/2 = 0.34 V vs RHE with n = 3.8) when the Fe porphyrin is adsorbed on XC72 (a graphitic carbon), this activity is much lower when the porphyrin is adsorbed on either MoS 2 (E 1/2 = -0.15 V vs RHE with n = 2.2) or g-C 3 N 4 (E 1/2 = -0.24 V vs RHE with n = 3.1). Electron paramagnetic resonance (EPR), X-ray absorption fine structure (XAFS), and magnetometry measurements show the electronic structure around the Fe center is the same for all three supports. Only the Fe porphyrin supported on XC72 exhibits a pH dependence in its ORR activity. This observation, coupled with the increased hydrophilicity of XC72 relative to the other supports, suggests that the support-electrolyte interaction controls the ORR activity. Modification of MoS 2 to increase its hydrophilicity results in a more active ORR catalyst.
Conversion of cellulose to high-yield glucose in water over sulfonated mesoporous carbon fibers with optimized acidity
The hydrolysis of cellulose to high-yield glucose in water remains challenging owing to the limited acidity and substrate contact of sulfonated carbons. In this study, we report a unique sulfonated mesoporous carbon fiber with optimized acidity prepared by the pyrolysis of FeCl 3 -impregnated wipe fibers followed by acid treatment. The Bronsted acidity (especially for SO 3 H) was produced by sulfonation of the magnetic carbon fiber intermediate, while Lewis acidity originated from small Fe 3 O 4 nanoparticles and the remaining defects. The balanced Bronsted and Lewis acidity combined with hydrophilic functionalities was simultaneously tailored by varying the Fe/wipe fiber (WF) feed ratio and pyrolysis temperature to change the porous structure of the final catalysts. The elaborately fabricated MCF-SO 3 H-20-500 (20% Fe/WF feed ratio and pyrolysis at 500 degrees C) delivered 66.0% glucose yield as cellulose was completely converted. This is the highest glucose yield achieved by the hydrolysis of untreated cellulose in water over a sulfonated carbon catalyst. The optimized Bronsted and Lewis acidity was mainly responsible for the controlled conversion of cellulose to glucose, while the rich hydrophilic functionalities and superior mesoporous structure of the catalyst facilitated contact to cellulose and mass transfer. This investigation will open new avenues to design high-performance carbon sulfoacid catalysts toward cellulose hydrolysis.
AFM Slip Length Measurements for Water at Selected Phyllosilicate Surfaces
Most reported slip length measurements have been made at the surfaces of synthetic materials and modified synthetic materials. In contrast, few slip length measurements at the surface of unmodified natural mineral surfaces have been reported. In this regard, flow at the silica face surfaces of the phyllosilicate minerals, talc and mica, was considered. A slip boundary condition was expected at the nonpolar hydrophobic silica surface of talc leading to enhanced flow, and a no-slip boundary condition was expected at the hydrophilic silica surface of mica. Atomic force microscopy (AFM) slip length measurements were made at the talc and mica surfaces. The slip length results for the hydrophobic silica surface of talc were contrasted to the results for the hydrophilic silica surface of mica (no-slip flow). The results are discussed based on molecular dynamics simulations (MDS), as reported in the literature, and AFM images of surface nanobubbles. For nonpolar hydrophobic surfaces (such as talc), it is doubtful that the MDS interfacial water structure and the water exclusion zone (3.2 Å) account for the AFM slip flow with slip lengths as great as 95 nm. Rather, a better explanation for the AFM slip flow condition is based on reduced interfacial viscosity due to the presence of dissolved gas and the accommodation of pancake nanobubbles at the talc surface having a height dimension of magnitude similar to the slip length.