Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hybrid functional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Analysis of Different Cost Functions in the Geosect Airspace Partitioning Tool

A new cost function representing air traffic controller workload is implemented in the Geosect airspace partitioning tool. Geosect currently uses a combination of aircraft count and dwell time to select optimal airspace partitions that balance controller workload. This is referred to as the aircraft count/dwell time hybrid cost function. The new cost function is based on Simplified Dynamic Density, a measure of different aspects of air traffic controller workload. Three sectorizations are compared. These are the current sectorization, Geosect's sectorization based on the aircraft count/dwell time hybrid cost function, and Geosect s sectorization based on the Simplified Dynamic Density cost function. Each sectorization is evaluated for maximum and average workload along with workload balance using the Simplified Dynamic Density as the workload measure. In addition, the Airspace Concept Evaluation System, a nationwide air traffic simulator, is used to determine the capacity and delay incurred by each sectorization. The sectorization resulting from the Simplified Dynamic Density cost function had a lower maximum workload measure than the other sectorizations, and the sectorization based on the combination of aircraft count and dwell time did a better job of balancing workload and balancing capacity. However, the current sectorization had the lowest average workload, highest sector capacity, and the least system delay.

Wong, Gregory L.↗
DOE OSTI2024

Electronic properties of corundum-like Ir 2 O 3 and Ir 2 O 3 -Ga 2 O 3 alloys

In the hexagonal, corundum-like structure, α-Ga 2 O 3 has a bandgap of ~5.1 eV, which, combined with its relatively small electron effective mass, high Baliga's figure of merit, and high breakdown field, makes it a promising candidate for power electronics. Ga 2 O 3 is easy to dope n-type, but impossible to dope p-type, impeding the realization of some electronic device designs. Developing a lattice-matched p-type material that forms a high-quality heterojunction with n-type Ga 2 O 3 would open new opportunities in electronics and perhaps optoelectronic devices. In this work, we studied Ir 2 O 3 as a candidate for that purpose. Using hybrid density functional theory calculations we predict the electronic band structure of α-Ir 2 O 3 and compare that to α-Ga 2 O 3 , and study the stability and electronic properties of α-(Ir x Ga 1–x ) 2 O 3 alloys. We discuss the band offset between the two materials and compare it with recently available experimental data. We find that the Ir d bands that compose the top of the valence band in α-Ir 2 O 3 are much higher in energy than O p bands in α-Ga 2 O 3 , possibly enabling effective p-type doping. Finally, our results provide an insight into using the Ir 2 O 3 or Ir 2 O 3 -Ga 2 O 3 alloys as p-type material lattice-matched to α-Ga 2 O 3 for the realization of p–n heterojunctions.

36 MATERIALS SCIENCE↗
NASA NTRS1992

A practical low-boom overpressure signature based on minimum sonic boom theory

A brief resume of sonic boom minimization methods is given to provide a background for a new, empirical modification of the Seebass and George minimum-nose-shock sonic boom F-function and signature. The new 'hybrid' F-function has all the inherent flexibility of application found with the Darden-modified Seebass and George F-function. In addition, it has enhanced this flexibility and applicability with neglegible increase in nose and/or tail shock strength. A description of this 'hybrid' F-function and signature is provided, and the benefits of using them to design high-performance, low-boom aircraft are discussed.

Mack, Robert J.↗
DOE OSTI2025

Optical properties of vacancies in aluminum oxide (𝛼−Al 2 ⁢O 3 ) from first principles

We employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy (𝑉 O ) and aluminum vacancy (𝑉 Al ) in 𝛼−Al 2 ⁢O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at 𝑉$^0_O$ to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at 𝑉$^0_O$. We confirm that the slowly decaying 3.0 eV emission band of the 𝐹 center is due to a triplet-singlet transition at 𝑉$^0_O$. Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the 𝐹 + center are generated by internal transitions at 𝑉$^{+1}_O$. The line shape for the excitation of an electron from 𝑉$^{+1}_O$ to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with 𝑉$^{+2}_O$ also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in 𝛼−Al 2 ⁢O 3 is a split-vacancy configuration 𝑉 Al,s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at 𝑉$^{−3}_{Al}$ and 𝑉$^{−3}_{Al,s}$ sites with the CBM. The line shapes of the two 𝑉 Al configurations overlap and are considerably broader than the spectra corresponding to 𝑉 O .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Biomass-Derived Carbon and Their Composites for Supercapacitor Applications: Sources, Functions, and Mechanisms

Biomass-derived carbons are eco-friendly and sustainable materials, making them ideal for supercapacitors due to their high surface area, excellent conductivity, cost-effectiveness, and environmental benefits. This review provides valuable insights into biomass-derived carbon and modified carbon for supercapacitors, integrating both experimental results and theoretical calculations. This review begins by discussing the origins of biomass-derived carbon in supercapacitors, including plant-based, food waste-derived, animal-origin, and microorganism-generated sources. Then, this review presents strategies to improve the performance of biomass-derived carbon in supercapacitors, including heteroatom doping, surface functionalization, and hybrid composite construction. Furthermore, this review analyzes the functions of biomass-derived carbon in supercapacitors both in its pure form and as modified materials. The review also explores composites derived from biomass-based carbon, including carbon/MXenes, carbon/MOFs, carbon/graphene, carbon/conductive polymers, carbon/transition metal oxides, and carbon/hydroxides, providing a thorough investigation. Most importantly, this review offers an innovative summary and analysis of the role of biomass-derived carbon in supercapacitors through theoretical calculations, concentrating on four key aspects: energy band structure, density of states, electron cloud density, and adsorption energy. Finally, the review concludes the future research directions for biomass carbon-based supercapacitors, including the discovery of novel biomass materials, tailoring surface functional groups, fabricating high-performance composite materials, exploring ion transfer mechanisms, and enhancing practical applications. In summary, this review offers a thorough exploration of the sources, functions, and mechanisms of biomass-derived carbon in supercapacitors, providing valuable insights for future research.

biomass-derived carbon↗
DOE OSTI2025

Benchmarking Density Functional Theory Methods for Efficient Calculations of a Strongly Correlated Li 1– x Ni 1– y O 2−δ System

Transition metal oxides (TMOs), such as LiNiO 2 , are promising candidates for energy storage and electronic devices due to their unique electronic properties, exceptional physical and chemical characteristics, and ability to adopt multiple oxidation states. However, accurately predicting their properties using mean-field density functional theory (DFT) is challenging due to the presence of strongly correlated d-electrons and the complex interplay between their structural, electronic, and magnetic responses. These challenges are further exacerbated by the need to model defects, surfaces, and interfaces, which require computationally efficient, large-scale simulations. To address these issues, we carry out a benchmark study on the Li 1–x NiO 2 system, evaluating the performance of several popular functionals. Our findings demonstrate that combining SCAN functional relaxation with single-step HSE calculations provides a practical and scalable computational strategy. This approach balances accuracy and efficiency, enabling high-throughput simulations of strongly correlated TMOs and improved predictive modeling capability of TMOs for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Pathways of Photocatalytic Oxidation of Formic Acid on Dry and Hydrated Anatase TiO 2 Surfaces

The photocatalytic oxidation of formic acid (FA), which is one of the most abundant volatile organic compounds, is a promising air remediation technology inspired by nature. However, the detailed mechanism of this photocatalytic reaction on the surface of TiO 2 , a typical photocatalyst, is not yet well-understood. In this work, we present a computational mechanistic study of the thermal vs photocatalytic oxidation of FA on dry and hydrated anatase TiO 2 (101) surfaces, based on periodic hybrid density functional theory (DFT) calculations, in which the photooxidation is treated as an excited-state process in a constrained triplet spin state. We first compare the adsorption modes of FA on the anatase (101) surface in the ground and excited states, followed by identification of the corresponding reaction intermediates that lead to the formation of CO 2 . We unveil the pivotal role of photogenerated holes localized at surface under-coordinated oxygen sites in mediating the C−H bond cleavage, thereby promoting CO 2 formation through a highly stable intermediate and an exergonic reaction step. Further investigation of the effect of coadsorbed water molecules shows that hydrogen bonding with water stabilizes FA in a monodentate configuration. This is favored over the unreactive bidentate structure that is the most stable under dry conditions, thus providing insight into the experimentally observed increase of the reaction rate in the presence of water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hybrid Metal Halides: Advancing Optoelectronic Materials (Final Technical Report)

Hybrid metal halides, particularly main group halide perovskites, are a unique class of materials that offer exceptional optoelectronic properties along with a remarkable materials design space. Initial research on this class of materials was driven by the ability of the prototype hybrid 3D perovskite-structured compound methylammonium lead iodide to function as the active layer in thin film solar cells. It is now known that this class of materials comprise a large family with tunable band gaps, relatively high charge carrier mobilities in both single crystal and polycrystalline forms, and relatively low concentrations of (deleterious) electrically active states within the band gap. Beyond applications in solar cells, the potential of these materials has been extended to emitters in light emitting diodes, and active components of radiation detectors. Complementing new functionality, the design space for hybrid metal halides continues to increase with discovery of new structural motifs. In this project, the combination of organic and inorganic functionalities has been employed to open pathways to the design and synthesis new, functional hybrid metal halides. Beyond the simple perovskites, Ruddlesden-Popper and Dion-Jacobsen compounds, and other variants, such as the newly advanced “hollow” perovskites have been studied. The materials have provided routes to understanding the unique electronic properties of hybrid metal halides because of their natural quantum well structures as well as other means of controlling band gaps and band dispersions. Understanding these materials, including the design rules for their formation, their structures and compositions in bulk and in thin films form, and the role of local (non-crystallographic) structure has an important aspect of this endeavor. The goal of advancing new materials and new fundamental understanding within this deceptively simple, yet fascinating class of compounds, so richly endowed with interesting and useful functionality, has been fulfilled.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Problems and research issues associated with the hybrid control of force and displacement

The hybrid control of force and position is basic to the science of robotics but is only poorly understood. Before much progress can be made in robotics, this problem needs to be solved in a robust manner. However, the use of hybrid control implies the existence of a model of the environment, not an exact model (as the function of hybrid control is to accommodate these errors), but a model appropriate for planning and reasoning. The monitored forces in position control are interpreted in terms of a model of the task as are the monitored displacements in force control. The reaction forces of the task of writing are far different from those of hammering. The programming of actions in such a modeled world becomes more complicated and systems of task level programming need to be developed. Sensor based robotics, of which force sensing is the most basic, implies an entirely new level of technology. Indeed, robot force sensors, no matter how compliant they may be, must be protected from accidental collisions. This implies other sensors to monitor task execution and again the use of a world model. This new level of technology is the task level, in which task actions are specified, not the actions of individual sensors and manipulators.

Paul, R. P.↗
NASA NTRS1975

Hybrid computer methods for direct functional optimization

Control and trajectory optimization involves the minimization of a performance index (PI) of integral form where some optimal control law exists in a dynamic system. In this paper, a hybrid minicomputer with an adaptive random-search algorithm implements an iterative search for the optimal control. The search assumes that some initial control is randomly perturbed and a fast analog computer generates respective PI from the analog response of the dynamic system. An improved PI informs the digital computer to utilize the perturbed control as a basis for the next iteration; otherwise a new perturbation replaces the old perturbation in the next iteration. The search terminates when no further improvements occur.

Andrews, M.↗
DOE OSTI2025

Information theory optimization of signals from small-angle scattering measurements

Small-angle X-ray scattering (SAXS) of particles in solution informs on the conformational states and assemblies of biological macromolecules (bioSAXS) outside of cryo- and solid-state conditions. In bioSAXS, the SAXS measurement under dilute conditions is resolution limited, and through an inverse Fourier transform, the measured SAXS intensities directly relate to the physical space occupied by the particles via the P (r)-distribution. Yet, this inverse transform of SAXS data has been historically cast as an ill-posed, ill-conditioned problem requiring an indirect approach. Here, we show that through the applications of matrix and information theories, the inverse transform of SAXS intensity data is a well-conditioned problem. The so-called ill-conditioning of the inverse problem is directly related to the Shannon number. By exploiting the oversampling enabled by modern detectors, a direct inverse Fourier transform of the SAXS data is possible, provided the recovered information does not exceed the Shannon number. The Shannon limit corresponds to the maximum number of significant singular values that can be recovered in a SAXS experiment, suggesting this relationship is a fundamental property of band-limited inverse integral transform problems. This correspondence reduces the complexity of the inverse problem to the Shannon limit and maximum dimension. We propose a hybrid scoring function using an information theory framework that assesses both the quality of the model-data fit as well as the quality of the recovered P (r)-distribution. The hybrid score utilizes the Akaike information criteria and Durbin-Watson statistic that considers parameter-model complexity, i.e., degrees of freedom, and the randomness of the model-data residuals. The described tests and findings extend the boundaries for bioSAXS by completing the information theory formalism initiated by Peter B. Moore to enable a quantitative measure of resolution in SAXS, robustly determine maximum dimension, and more precisely define the best parameter model appropriately representing the observed scattering data.

Rambo, Robert P. [Science and Technology Facilitie↗
NASA NTRS2003

[The role of the serotonin system in the stress response of various cells]

The recombinant mouse brain serotonin receptor (5HT1c) was used to study the response of plant cells and oocytes to a stress signal activated by the serotonin-serotonin receptor interaction and associated Ca2+ flow. Based on plant expression vectors, recombinant constructs were obtained to direct production of 5HT1c fused with the green fluorescent protein in plant cells. The mRNAs for hybrid proteins were synthesized in an in vitro transcription system. The expression and function of the hybrid protein and the function of the associated ion channels were electrophysiologically studied in Xenopus laevis oocytes injected with the hybrid mRNA. The hybrid protein was functional and changed the operation of the Ca2+ channel in oocytes. To study the expression of the hybrid constructs in plant cells, the in vitro transcription product was inoculated in tobacco leaves, which then fluoresced.

Non-NASA Center↗
NASA NTRS1989

A hybrid-perturbation-Galerkin technique which combines multiple expansions

A two-step hybrid perturbation-Galerkin method for the solution of a variety of differential equations type problems is found to give better results when multiple perturbation expansions are employed. The method assumes that there is parameter in the problem formulation and that a perturbation method can be sued to construct one or more expansions in this perturbation coefficient functions multiplied by computed amplitudes. In step one, regular and/or singular perturbation methods are used to determine the perturbation coefficient functions. The results of step one are in the form of one or more expansions each expressed as a sum of perturbation coefficient functions multiplied by a priori known gauge functions. In step two the classical Bubnov-Galerkin method uses the perturbation coefficient functions computed in step one to determine a set of amplitudes which replace and improve upon the gauge functions. The hybrid method has the potential of overcoming some of the drawbacks of the perturbation and Galerkin methods as applied separately, while combining some of their better features. The proposed method is applied, with two perturbation expansions in each case, to a variety of model ordinary differential equations problems including: a family of linear two-boundary-value problems, a nonlinear two-point boundary-value problem, a quantum mechanical eigenvalue problem and a nonlinear free oscillation problem. The results obtained from the hybrid methods are compared with approximate solutions obtained by other methods, and the applicability of the hybrid method to broader problem areas is discussed.

Geer, James F.↗
NASA NTRS1990

A hybrid perturbation-Galerkin technique that combines multiple expansions

A two-step hybrid perturbation-Galerkin method for the solution of a variety of differential equations type problems is found to give better results when multiple perturbation expansions are employed. The method assumes that there is parameter in the problem formulation and that a perturbation method can be used to construct one or more expansions in this perturbation coefficient functions multiplied by computed amplitudes. In step one, regular and/or singular perturbation methods are used to determine the perturbation coefficient functions. The results of step one are in the form of one or more expansions each expressed as a sum of perturbation coefficient functions multiplied by a priori known gauge functions. In step two the classical Bubnov-Galerkin method uses the perturbation coefficient functions computed in step one to determine a set of amplitudes which replace and improve upon the gauge functions. The hybrid method has the potential of overcoming some of the drawbacks of the perturbation and Galerkin methods as applied separately, while combining some of their better features. The proposed method is applied, with two perturbation expansions in each case, to a variety of model ordinary differential equations problems including: a family of linear two-boundary-value problems, a nonlinear two-point boundary-value problem, a quantum mechanical eigenvalue problem and a nonlinear free oscillation problem. The results obtained from the hybrid methods are compared with approximate solutions obtained by other methods, and the applicability of the hybrid method to broader problem areas is discussed.

Geer, James F.↗
NASA NTRS2005

Domain Compilation for Embedded Real-Time Planning

A recently conceived approach to automated real-time control of the actions of a robotic system enables an embedded real-time planning algorithm to develop plans that are more robust than they would otherwise be, without imposing an excessive computational burden. This approach occupies a middle ground between two prior approaches known in the art as the universal-plan and hybrid approaches. Ever since discovering the performance limitations of taking a sense-plan-act approach to controlling robots, the robotics community has endeavored to follow a behavior-based approach in which a behavior includes a rapid feedback loop between state estimation and motor control. Heretofore, system architectures following this approach have been based, variously, on algorithms that implement universal plans or algorithms that function as hybrids of planners and executives. In a typical universal-plan case, a set of behaviors is merged into the plan, but the system must be restricted to relatively small problem domains to avoid having to reason about too many states and represent them in the plan. In the hybrid approach, one implements actions as small sets of behaviors, each applicable to a limited set of circumstances. Each action is intended to bring the system to a subgoal state. A planning algorithm is used to string these actions together into a sequence to traverse the state space from an initial or current state to a goal state. The hybrid approach works well in a static environment, but it is inherently brittle in a dynamic environment because a failure can occur when the environment strays beyond the region of applicability of the current activity. In the present approach, a system can vary from the hybrid approach to the universal-plan approach, depending on a single integer parameter, denoted n, which can range from 1 to a maximum domain-dependent value of M. As illustrated in the figure, n = 1 represents the hybrid approach, in which each linked action covers a small part of the state space of the system. As n increases, the portion of state space associated with each action and its subgoal grows. When n reaches M, coverage extends over the full state space, so that the system contains a universal plan.

Barrett, Anthony↗
NASA NTRS2016

Biomechanical Modeling of the Deadlift Exercise to Improve the Efficacy of Resistive Exercise Microgravity Countermeasures

During long-duration spaceflight missions, astronauts exposure to microgravity without adequate countermeasures can result in losses of muscular strength and endurance, as well as loss of bone mass. As a countermeasure to this challenge, astronauts engage in resistive exercise during spaceflight to maintain their musculoskeletal function. The Hybrid Ultimate Lifting Kit (HULK) has been designed as a prototype exercise device for an exploration-class vehicle; the HULK features a much smaller footprint than previous devices such as the Advanced Resistive Exercise Device (ARED) on the International Space Station (ISS), which makes the HULK suitable for extended spaceflight missions in vehicles with limited volume. As current ISS exercise countermeasure equipment represents an improvement over previous generations of such devices, the ARED is being employed as a benchmark of functional performance. This project involves the development of a biomechanical model of the deadlift exercise, and is novel in that it is the first exercise analyzed in this context to include the upper limbs in the loading path, in contrast to the squat, single-leg squat, and heel raise exercises also being modeled by our team. OpenSim software is employed to develop these biomechanical models of humans performing resistive exercises to assess and improve the new exercise device designs. Analyses include determining differences in joint and muscle forces when using different loading strategies with the device, comparing and contrasting with the ARED benchmark, and determining whether the loading is sufficient to maintain musculoskeletal health. During data collection, the number of repetitions, load, cadence, stance, and grip width are controlled in order to facilitate comparisons between loading configurations. To date, data have been collected for two human subjects performing the deadlift exercise on the HULK device using two different loading conditions. Recorded data include motion capture, electromyography (EMG), ground reaction forces, device load cell data, photos and videos, and anthropometric data. Work is ongoing to perform biomechanical analyses including inverse kinematics and inverse dynamics to compare different versions of the deadlift model in order to determine which provides an appropriate level of detail to study this exercise. This work is supported by the National Space Biomedical Research Institute through NCC 9-58.

physical exercise↗
DOE OSTI2025

Defect Stability in CdTe Based on Formation Energies and Migration Barriers

Native point defects are thought to play a key role in CdTe, either as compensation centers in intentionally doped material, as a source of conductivity in nominally undoped material, or as electron–hole recombination centers. Here, the discussion of their concentration and impact has often centered only on formation energies and transition levels. Using hybrid density functional calculations, including the effects of spin–orbit coupling (SOC), we discuss the stability of native point defects in CdTe based on their formation energies and migration barriers. We show that although Cd interstitials are the lowest energy donor defects, they are unstable at room temperature due to a low migration barrier. They are important for maintaining charge neutrality during growth or annealing at high temperatures, but once the material is brought to room temperature, they are not frozen in as often assumed and are expected to anneal out, leaving the other more stable defects to determine the conductivity. Taking this into account in the solution of the charge neutrality equation, we are able to predict the conductivity type and carrier concentrations that are in good agreement with experimental observations.

14 SOLAR ENERGY↗