Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high explosive experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A study of explosive-induced fracture in polymethyl methacrylate (PMMA)

The fracture response of geologic materials is of interest for applications, including geothermal energy harnessing and containment of underground explosions. To better understand the explosively induced fracture response of geomaterials, polymethyl methacrylate (PMMA) was used as a transparent rock surrogate to allow imaging of internal shock propagation and fracture growth processes. Experiments were conducted using high-speed shadowgraphy and photon Doppler velocimetry (PDV), which were compared to numerical simulations. Experiments measured fractures produced in 304.8mm × 304.8mm × 304.8mm PMMA cubes with two simultaneously initiated detonators. The cubes were subjected to varying amounts and directions of externally applied uniaxial stresses, including no stress, 2 MPa stress, and 20 MPa stress. The fracture radius as a function of time was extracted from the high-speed videos. Post-test images of the PMMA cubes aided in the determination of three-dimensional effects not directly imaged by the cameras. The surface velocity history and the shock response captured in PDV and the high-speed videos were compared to the simulated explosive-induced shock response. The simulation results indicate that the shock drives the fracture for the first 20 μs corresponding to a fracture radius of approximately 15 mm in the experiments. The gas-driven fracture extent was estimated analytically using an equilibrium stress distribution calculated after the shock wave propagation through the sample. Reduction in the gas pressure due to the leakage of the explosive products through the crack as a function of time was accounted for. In conclusion, the estimated fracture lengths were in agreement with the experimentally observed fracture lengths.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

LLNL Macroscopic Anisotropic Explosives Research at INL National Security Test Range - Test Results

A select team of 23 engineers, scientists, and explosives specialists from LLNL, LANL, INL, and Marine Raiders from Marine Special Operations Command (MARSOC) and U.S. Special Operations Command (SOCOM) assembled during the second week of November at the INL National Security Test Range near Idaho Falls to investigate and demonstrate fundamental principles of explosives anisotropy. Today's explosives are isotropic in their detonation performance. That is, no matter what direction a detonation runs through bulk explosive, the performance is the same; whereas, anisotropic explosives exhibit different performance, depending on which direction the detonation wave moves through the explosive. The ANISO Team worked in subfreezing temperatures on the Snake River Plain, carrying out 55 experimental explosives shots in four days that lead to a clear understanding of the performance and behavior of an assembly of small, linerless, C4 shaped charges. These shots clearly demonstrated, for the first time, on a macroscopic scale, the principle of anisotropy in measured progression of the detonation through the explosive assembly. The outputs of nine piezo timing pins in the explosive assembly clearly showed detonation progressing through the assembly faster than nominal detonation velocity and moving slower than nominal detonation velocity in the opposite direction. Basic data from these experiments will be used to design and construct explosives assemblies that will be shot in the LLNL High Explosives Applications Facility's (HEAF). These experimental tests will provide refined basic data that will then be used by modelers to develop high explosives models. Computer simulations using these models will then be run to predict performance and design inhomogeneous, anisotropic bulk explosive charges that will be tested at LLNL.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

A Summary of the UCLA HANE-Laser Experiment: 2011-2020

In the early years of this century, there was renewed interest at DTRA in artificial radiation belts, the dynamics of high altitude nuclear explosions that produced them, the development of large-scale kinetic plasma computer models at LLNL and LANL (particularly in the form of “hybrid” {i.e., particle ions, massless fluid electrons} algorithms), and the building of a laser facility at UCLA, under the direction of Prof. Niemann, which was connected to the Large Plasma Device (LAPD), a DOE user facility. These advances sparked the idea for a new laser experimental program to examine early-time HANE issues, reviving the concept from a former program at NRL in the 90’s. The basic motivation for this new effort can be traced back to the first DTRA artificial radiation belt workshop at Stanford in 2009. Subsequent discussions then led to a formal proposal from UCLA that was submitted to DTRA (Grant Jones) in 2010, vigorously reviewed, and finally approved in 2011, with funding begun in 2012. An historical perspective of this development process was presented at a DTRA review last year. In this document we review and summarize the major achievements of the DTRA-sponsored UCLA HANE-laser experiment over the past eight years. Our purpose is to briefly describe the major achievements of this program, as documented in the included extensive list of journal publications [which does not include all the publications nor any of the many invited and contributed presentations of the UCLA group], the role of the national laboratories in this effort, and how this work has impacted (and will continue to improve) our understanding of high altitude nuclear events.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

LA-R43S6-L1 Postshot Report [Slides]

The Ranchero LA-R43S6-L1 test (formerly referred to as LA-43S-L1. The R specifically designates it is a Ranchero device and the 6 indicates a 6” high explosive charge diameter in anticipation of using larger diameters in the future.) was conducted on 3/8/17 with good success. The experiment was the first test of a “Swooped” Ranchero flux compression generator (FCG), and the load for the test was an aluminum imploding liner. In addition to the swoop, the stator was anodized to provide an insulating layer instead of one or more layers of polyethylene as had been the case for all earlier Ranchero tests. Using the Firing point TA-39-88 capacitor bank, 3.5 MA was delivered to the FCG for the initial magnetic field, and 36.4 MA were delivered to the load having an initial inductance of 2.5 nH. Implosion speeds over 1.1 cm/us were recorded, which exceeds previous LANL solid liner experimental results. The test was diagnosed with 18 PDV channels, 12 of which recorded liner implosion data, and the other 6 of which tracked the FCG armature during flux compression. These armature expansion data recorded during flux compression are the first of their kind, and it was previously unknown, due to unknown effects of the SF 6 in the flux compression volume, whether or not the expansion could be recorded using the PDV technique. Post shot 2D MHD calculations employed a complete external circuit model, and an improved flux diffusion model not available prior to the test. Results from these simulations show very good agreement with the experimental result. Four PDV channels recorded the liner implosion viewed radially outward from the center of the liner. All four of these probes recorded implosion velocities greater that 1 cm/µs, with the cylindrical center displaced by ~2 mm from actual center. Four PDV channels looked at +10° angles from the CMU wall, and four looked at -10° angles. A glide plane interaction is shown moving toward the center of the liner in MHD calculations, and PDV probes provide confirmation. The high explosive (HE) in the LA-R43S6-L1 test was PBX 9501 which had to be glued together in many pieces, and the test was preceded by a camera test to verify that the PBX 9501 could be assembled with acceptable tolerance in glue joints to prevent severing the armature during expansion. The camera test verified an acceptable armature performance, and results are given in complete detail in a post shot report LA-UR-19-20124, and summarized here. This report provides complete detail of the considerable body of data obtained on the test and in the post shot calculations. It is prepared in Power Point for ease of preparation and future review. Shot documentation available in the LANL on-line library are included as references, and non-referenceable documents will be cited and stored in an LA- R43S6-L1 post shot folder stored on an M-6 shared drive. Fabrication drawings are also maintained in an M-6 shared drive and paper files are available from M-6 personnel. This report will be maintained as a PowerPoint document on the shared drive, as well, since included movies will play and graphs from Excel files retain information in the PowerPoint versions. PDF versions are required for clearance and are not to large to send by e-mail.

42 ENGINEERING↗
DOE OSTI2024

Kubernetes for the Deep Underground Neutrino Experiment Data Acquisition

The Deep Underground Neutrino Experiment (DUNE) is a next-generation long-baseline neutrino experiment based in the USA which is expected to start taking data in 2029. DUNE aims to precisely measure neutrino oscillation parameters by detecting neutrinos from the LBNF beamline (Fermilab) at the Far Detector, 1,300 kilometres away, in South Dakota at the Sanford Underground Research Facility. The Far Detector will consist of four cryogenic Liquid Argon Time Projection Chamber detectors of 17 kT, each producing more than 1 TB/sec of data. The main requirements for the data acquisition system are the ability to run continuously for extended periods of time, with a 99% up-time requirement, and the functionality to record both beam neutrinos and low energy neutrinos from the explosion of a neighbouring supernova, should one occur during the lifetime of the experiment. The key challenges are the high data rates that the detectors generate and the deep underground environment, which places constraints on power and space. To overcome these challenges, DUNE plans to use a highly optimised C++ software suite and a server farm of about 110 nodes continuously running about two hundred multicore processes located close to the detector, 1.5 kilometres underground. Thirty nodes will be at the surface and will run around two hundred processes simultaneously. DUNE is studying the use of the Kubernetes framework to manage containerised workloads and take advantage of its resource definitions and high up-time services to run the DAQ system. Progress in deploying these systems at the CERN neutrino platform on the prototype DUNE experiments is reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Shock compression response of an insensitive high explosive single crystal: 1,1-diamino-2,2-dinitroethene (FOX-7)

Insensitive high explosives (IHEs) – that do not compromise performance – are of immense interest as a safer alternative to conventional high explosives, such as pentaerythritol tetranitrate (PETN) and cyclotrimethylenetrinitramine (RDX). Despite the strong interest in using IHEs, shock compression experiments on IHE single crystals have not been reported. To address this need, plate impact experiments were conducted to measure wave profiles in 1,1-diamino-2,2-dinitroethene (FOX-7) single crystals – a representative IHE crystal – shocked to 21 GPa longitudinal stress. Particle velocity histories, measured using laser interferometry, show a clear two-wave structure (elastic-inelastic response) at modest stresses (<3.8 GPa). Wave profiles at higher stresses show a single (overdriven) wave. Measured shock velocities and wave profiles provide accurate Hugoniot data to 21 GPa. The measured wave profiles to 21 GPa show no sign of energy release due to chemical decomposition and constitute the first demonstration of an IHE single crystal insensitivity under plane shock compression. Numerical simulations using a phenomenological material model developed for FOX-7 showed good agreement with the measured wave profiles. The experimental results and continuum simulations presented here constitute a significant first step in gaining insight into the shock compression response of IHE single crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Simulations of Sweeping Wave Propagation in a Boron Carbide Plate

In February 2020, experiments were conducted at Los Alamos National Laboratory measuring the propagation of a sweeping wave through a plate of boron carbide which was induced by detonating an adjacent charge of high explosive. Six such shots were red and in each case progress of the wave along the exposed surface of the plate was tracked using photon doppler velocimetry (PDV). In this report we discuss calculations performed using the Lagrangian hydrocode FLAG to model data taken from these experiments. We discuss the models chosen for the different experimental components, the choice of mesh (focusing on, both, two- and three-dimensional geometries), and compare the results from these calculations to experimentally-extracted PDV traces. Notably, we find that the PDV traces for this experiment are most faithfully reproduced using the full three-dimensional geometry, even when the mesh resolution for the three-dimensional calculations was significantly lower than the resolution for the corresponding two-dimensional calculations. We attribute this to the geometry of the experimental setup. Moreover, we find only negligible differences for the PDV traces obtained using the sesame table equation of state for boron carbide and the Gruneisen equation of state.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shocked Transport: Experiments to Study Dynamic Particle Behavior under Varying Volume Fraction Conditions

Shocks interacting with densely-packed porous media is common in volcanic eruptions or in engineering applications such as ordinance. Large-scale, exploratory experiments have been performed by Frost and collaborators examining the behavior of a bed of particles subjected to a detonation wave. The detonation replaces the central explosive with a high-density, high-temperature gas that propagates outward. A shock wave travels through the particle bed, followed by a contact discontinuity between the shocked air and the explosive products. In the early times, the detonation wave causes many of the particles to collide and compact with each other. As the particles disperse, the experiments demonstrate a series of large-scale jets or fingers that form in the advancing particle front.

42 ENGINEERING↗
DOE OSTI2020

Free-field Ground Motion Induced by Underground Explosions at Aqueduct Mesa with Predictions for Physical Experiment One (PE1)

We fit standard power-law models for ground acceleration and particle velocity using scaled ground motion observations from underground nuclear explosions at Aqueduct Mesa on the Nevada National Security Site. The models are then validated using small-scale high-explosive (HE) test data from nearby Rainier Mesa. The comparison between model predictions and observations is good and can be made more favorable if the assumed yield for the HE tests are doubled. Further validation is made with a numerical experiment that additionally shows a transition in ground motion attenuation to elastic propagation (1 = r). An extended model is provided to incorporate the long-range transition in attenuation, which results in increased ground motions at farther range. We then make predictions for the field experiment, Physical Experiment One (PE1), to take place in P-tunnel on Aqueduct Mesa, and suggest that the models could be used in planning various operations for PE1.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Uncertainty Quantification in High Explosives Equations of State [Slides]

In order to fit models to data, we need a way to simulate the data given a model. Our projects involved simulators for the Manganin gauge experiment and for cylinder tests, which we use to calibrate models to experiments. We call the parameters we seek to optimize the degrees of freedom (DOF). We use a Bayesian approach with its associated UQ benefits.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

In situ chamber for studying battery failure using high-speed synchrotron radiography

The investigation of lithium-ion battery failures is a major challenge for personnel and equipment due to the associated hazards (thermal reaction, toxic gases and explosions). To perform such experiments safely, a battery abuse-test chamber has been developed and installed at the microtomography beamline ID19 of the European Synchrotron Radiation Facility (ESRF). The chamber provides the capability to robustly perform in situ abuse tests through the heat-resistant and gas-tight design for flexible battery geometries and configurations, including single-cell and multi-cell assemblies. High-speed X-ray imaging can be complemented by supplementary equipment, including additional probes (voltage, pressure and temperature) and thermal imaging. Together with the test chamber, a synchronization graphical user interface was developed, which allows an initial interpretation by time-synchronous visualization of the acquired data. Enabled by this setup, new meaningful insights can be gained into the internal processes of a thermal runaway of current and future energy-storage devices such as lithium-ion cells.

25 ENERGY STORAGE↗
DOE OSTI2021

Simulations of SITI Cookoff Experiments Carried Out with Different Lots of PBX 9502

A pressure dependent cookoff model for PBX 9502 was developed by Hobbs’ et. al. PBX 9502 is composed of 95% by mass triaminotrinitrobenzene (TATB) and a 5% by mass chlorotrifluoroethylene/vinylidine fluoride binder. The objective in this study is to implement this cookoff model in Aria to simulate Sandia Instrumented Thermal Ignition (SITI) experiments that were carried out with different manufacturing lots of PBX 9502. The SITI design consists of solid cylinders (1" diameter × 1" height) of insensitive high explosive (IHE) confined by a cylindrical aluminum case. An electric heater is wrapped around the lateral surface of the case. This heater produces a temperature heating ramp on the outer surface of the case. Internal thermocouples measure the IHE temperature rise from the center to locations close to the IHE-aluminum interface. The energetic material is heated until thermal ignition occurs. Pressure is measured with a static pressure transducer installed on top of the confinement case. Two–dimensional axisymmetric heat conduction finite element models were implemented to simulate these experiments using four options of the PBX 9502 cookoff model. In addition, the predictive ability of this thermal decomposition model is evaluated using Latin Hypercube Sampling (LHS) techniques.

42 ENGINEERING↗
DOE OSTI2023

Seismoacoustic Analysis of the Large Surface Explosion Coupling Experiment Using a Large- N Seismic Array

Seismoacoustic signals at local distance (<~10 km) are widely used as important constraints on source parameters for near-surface events, yet the seismoacoustic wave generation and energy partitioning are not fully understood. Spatially dense sensors could provide observations in high resolution to capture the full wavefield for better understanding wave propagation and improving source estimation. Recently, spatially dense observations of the local seismoacoustic wavefield produced by a pair of 1-ton surface explosions have been recorded using a large-N seismic array. This large-N array consists of 446 geophones and covers an area of approximately 2×2.5 km 2 . The two surface explosions occur at the same location but at different times with different atmospheric conditions. Both seismic and air–ground coupled acoustic waves from the two surface explosions are well observed. Analyses of signals recorded by the large-N seismic array show different acoustic wave speed and amplitude for the two explosions. A strong spatial variability in acoustic wave speed and amplitude for each explosion is also observed. Finally, the observations suggest the important role of local atmosphere state on wave propagation and source estimation and demonstrate how the use of a large-N capability can improve characterization of the propagation medium and source.

58 GEOSCIENCES↗
DOE OSTI2024

A comparison of smartphone and infrasound microphone data from a fuel air explosive and a high explosive

For prompt detection of large (>1 kt) above-ground explosions, infrasound microphone networks and arrays are deployed at surveyed locations across the world. Denser regional and local networks are deployed for smaller explosions, however, they are limited in number and are often deployed temporarily for experiments. With the expanded interest in smaller yield explosions targeted at vulnerable areas such as population centers and key infrastructures, the need for more dense microphone networks has increased. An “attritable” (affordable, reusable, and replaceable) and flexible alternative can be provided by smartphone networks. Explosion signals from a fuel air explosive (thermobaric bomb) and a high explosive with trinitrotoluene equivalent yields of 6.35 and 3.63 kg, respectively, were captured on both an infrasound microphone and a network of smartphones. The resulting waveforms were compared in time, frequency, and time-frequency domains. The acoustic waveforms collected on smartphones produced a filtered explosion pulse due to the smartphone's diminishing frequency response at infrasound frequencies (<20 Hz) and was found difficult to be used with explosion characterization methods utilizing waveform features (peak overpressure, impulse, etc.). However, the similarities in time frequency representations and additional sensor inputs are promising for other explosion signal identification and analysis. As an example, a method utilizing the relative acoustic amplitudes for source localization using the smartphone sensor network is presented.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Radiation Belt Remediation: A Complex Engineered System (RBR-ACES) (Institutional Computing Report)

We have performed the simulation campaigns in support of LDRD-DR project Radiation Belt Remediation: A Complex Engineered System (RBR-ACES). This project involves modeling wave generation and wave propagation in plasma environment and studying the effect of waves on the distribution of high energy electrons with the focus on electrons appeared after a high-altitude nuclear explosion (HANE). One of the major goal of this research is strong validation of the numerical models with laboratory experiments and space-based experiments and observations.

42 ENGINEERING↗
DOE OSTI2025

Measurement of Close-in Ground Motion from an Underground Chemical Explosion

Understanding the geophysical response near an underground explosion is crucial for generating insights into the source and emplacement conditions that produce distinct observations in monitoring scenarios occurring at greater distances. Recently, Shot A of the Low Yield Nuclear Monitoring (LYNM) Physics Experiment 1 (PE1) series was conducted at the Nevada National Security Site to provide ground truth for subsurface explosion signal models. This experiment resulted in measuring near-source ground motion at distances ranging from 70 to 1000 m/kt with a 99% success rate, yielding high-fidelity knowledge of the near-field response that can serve as benchmarks for future numerical modeling and experiment planning. However, technical challenges exist in observing near-source phenomena while safeguarding sensitive data acquisition components from the detrimental effects of ground motion in the subsurface. This report outlines tools and techniques to address challenges associated with observing near-source accelerations and within the tunnel drift of the PE1 test bed. Additionally, we describe key systems designed with both modern advancements and legacy guidance to maximize the collection of high-quality ground motion data, which may be applied to constitutive and computational models, leading to new or improved understanding of the near- and far-field signals produced by underground explosions.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Cooperative Education

M-3 Focused Experiments is a group at Los Alamos National Lab (LANL) and is under the Dynamic Experiments Division. Their work surrounds the diagnostics and study of explosives and their interaction with materials. The data collected is used to better understand the erratic nature of explosions and high velocity projectiles. Through better comprehension of this science, the overall national security will be improved while innovations are made along the way. Despite the strong drive for research and development, the lab holds safety above all else and constantly updates procedures to protect LANL employees and their environment. At any time, there are multiple projects going on at once within the team and I am tasked with assisting the Firing Site Leaders and various research diagnosticians in any way possible with the setup, testing, and execution of data collection for each experiment. Such data includes velocity, fragmentation characteristics, and the spread of energy across the material to name a few. During my summer employment with the lab, my main goal is to maintain a questioning attitude and learn as much possible about the research and development side of science and engineering. Throughout the duration of the Co-op, many experiments will take place at specially designed firing sites which is where I will be spending most of my time.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Nimble Feedthrough Qualification - 125% High Explosive Overpressure Test Plan RevA

The primary purpose of this High Explosive (HE) Over-Pressure Test (OPT) is to qualify top cover diagnostic feedthroughs that will be used on LLNL Nimble Subcritical Experiment (SCE) Series designs per experimental design verification requirements specified in ASME Boiler and Pressure Vessel Code Case 2564, Impulsively-Loaded Pressure Vessels, Section VIII, Division 3; and to satisfy the over-test requirement of DOE-STD-1212. The diagnostic feedthroughs are part of the Vessel Confinement System (VCS), which is credited as a Safety Significant Design Feature per the U1a Facility Documented Safety Analysis (DSA). The OPT will be conducted at the LANL Area 1, R306 Firing Site (TA-15-R306) in a 3-foot diameter VCS depicted in Figure 1.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗