Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heterogeneous material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Flammability of Heterogeneously Combusting Metals

Most engineering materials, including some metals, most notably aluminum, burn in homogeneous combustion. 'Homogeneous' refers to both the fuel and the oxidizer being in the same phase, which is usually gaseous. The fuel and oxidizer are well mixed in the combustion reaction zone, and heat is released according to some relation like q(sub c) = delta H(sub c)c[((rho/rho(sub 0))]exp a)(exp -E(sub c)/RT), Eq. (1) where the pressure exponent a is usually close to unity. As long as there is enough heat released, combustion is sustained. It is useful to conceive of a threshold pressure beyond which there is sufficient heat to keep the temperature high enough to sustain combustion, and beneath which the heat is so low that temperature drains away and the combustion is extinguished. Some materials burn in heterogeneous combustion, in which the fuel and oxidizer are in different phases. These include iron and nickel based alloys, which burn in the liquid phase with gaseous oxygen. Heterogeneous combustion takes place on the surface of the material (fuel). Products of combustion may appear as a solid slag (oxide) which progressively covers the fuel. Propagation of the combustion melts and exposes fresh fuel. Heterogeneous combustion heat release also follows the general form of Eq.(1), except that the pressure exponent a tends to be much less than 1. Therefore, the increase in heat release with increasing pressure is not as dramatic as it is in homogeneous combustion. Although the concept of a threshold pressure still holds in heterogeneous combustion, the threshold is more difficult to identify experimentally, and pressure itself becomes less important relative to the heat transfer paths extant in any specific application. However, the constants C, a, and E(sub c) may still be identified by suitable data reduction from heterogeneous combustion experiments, and may be applied in a heat transfer model to judge the flammability of a material in any particular actual-use situation. In order to support the above assertions, two investigations are undertaken: 1) PCT data are examined in detail to discover the pressure dependence of heterogeneous combustion experiment results; and 2) heterogeneous combustion in a PCT situation is described by a heat transfer model, which is solved first in simplified form for a simple actual-use situation, and then extended to apply to PCT data reduction (combustion constant identification).

Jones, Peter D.↗
DOE OSTI2024

BEAST DB: Grand-Canonical Database of Electrocatalyst Properties

We present BEAST DB, an open-source database comprised of ab initio electrochemical data computed using grand-canonical density functional theory in implicit solvent at consistent calculation parameters. The database contains over 20,000 surface calculations and covers a broad set of heterogeneous catalyst materials and electrochemical reactions. Calculations were performed at self-consistent fixed potential as well as constant charge to facilitate comparisons to the computational hydrogen electrode. This article presents common use cases of the database to rationalize trends in catalyst activity, screen catalyst material spaces, understand elementary mechanistic steps, analyze the electronic structure, and train machine learning models to predict higher fidelity properties. Users can interact graphically with the database by querying for individual calculations to gain a granular understanding of reaction steps or by querying for an entire reaction pathway on a given material using an interactive reaction pathway tool. BEAST DB will be periodically updated, with planned future updates to include advanced electronic structure data, surface speciation studies, and greater reaction coverage.

database↗
DOE OSTI2024

Physics-informed neural networks for heterogeneous poroelastic media

This study presents a novel physics-informed neural network (PINN) framework for modeling poroelasticity in heterogeneous media with material interfaces. The approach introduces a composite neural network (CoNN) where separate neural networks predict displacement and pressure variables for each material. While sharing identical activation functions, these networks are independently trained for all other parameters. To address challenges posed by heterogeneous material interfaces, the CoNN is integrated with the Interface-PINNs (I-PINNs) framework (Sarma et al., Comput. Methods Appl. Mech. Eng. 429: 117135, 2024), allowing different activation functions across material interfaces. Further, this ensures accurate approximation of discontinuous solution fields and gradients. Performance and accuracy of this combined architecture were evaluated against the conventional PINNs approach, a single neural network (SNN) architecture, and the eXtended PINNs (XPINNs) framework through two one-dimensional benchmark examples with discontinuous material properties. The results show that the proposed CoNN with I-PINNs architecture achieves an RMSE that is two orders of magnitude better than the conventional PINNs approach and is at least 40 times faster than the SNN framework. Compared to XPINNs, the proposed method achieves an RMSE at least one order of magnitude better and is 40% faster.

42 ENGINEERING↗
DOE OSTI2025

Elucidation of Local Ordering and Atomic-Scale Structure in Polymer-Derived SiOC

Silicon oxycarbide (SiOC) is a versatile ceramic material with tunable microstructure and compositions that can be modulated through precursor chemistry and processing conditions. Though there are several noteworthy uses of SiOC across a range of application spaces, the difficulties in elucidating the short- to medium-range order within these materials have limited the maturation of strategies to precisely control SiC x O 4–x compositions for user-tailored applications. In this contribution, we implement a range of synchrotron scattering and spectroscopy methods coupled with stochastic modeling techniques to elucidate changes in local chemistry and structure associated with the pyrolysis of a commercially available SiOC polymer precursor. Stochastic modeling approaches provide valuable insights into decoupling local Si–O and Si–C environments while confirming predominate heterogeneous phases in materials. Using pyrolysis temperatures between 250 to 800 °C results in a heterogeneous material predominately composed of SiOC and amorphous SiO 2 domains. At 1100 °C, redistribution of Si–C pairs in the SiOC network and Si–O from the SiO 2 domains create a more ordered SiOC phase with local cubic SiC-like ordering. In addition, residual carbon leads to a detectable carbon phases at 1100 °C that persist at higher temperatures. These efforts address the difficulties of obtaining atomic-scale insights into the local structure and nanoscale heterogeneities in SiOC, providing pathways toward establishing structure–property relationships for future materials development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Silicon-On-Silicon Carbide Platform for Integrated Photonics

Silicon carbide (SiC)'s nonlinear optical properties and applications to quantum information have recently brought attention to its potential as an integrated photonics platform. However, despite its many excellent material properties, such as large thermal conductivity, wide transparency window, and strong optical nonlinearities, it is generally a difficult material for microfabrication. Here, it is shown that directly bonded silicon-on-silicon carbide can be a high-performing hybrid photonics platform that does not require the need to form SiC membranes or directly pattern in SiC. The optimized bonding method yields defect-free, uniform films with minimal oxide at the silicon–silicon–carbide interface. Ring resonators are patterned into the silicon layer with standard, complimentary metal–oxide–semiconductor (CMOS) compatible (Si) fabrication and measure room-temperature, near-infrared quality factors exceeding 10 5 . The corresponding propagation loss is 5.7 dB cm -1 . The process offers a wafer-scalable pathway to the integration of SiC photonics into CMOS devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chemical speciation correlated with microstructural heterogeneity of interdicted uranium materials

Two uranium powders seized by law enforcement in Victoria, Australia, have been characterized by established nuclear forensic methods in a previously published study. Here, in this work, the results of further characterization by a scanning transmission x-ray microscope (STXM) operating in the soft x-ray regime are reported. STXM images are used to estimate the elemental distribution in micrometer-scale particles of each powder, and oxygen K-edge absorption spectra are used to determine the chemical state of uranium. The results of the current study are consistent with the previous analysis; the first powder is found to be a potassium-uranium hydrate, while the second powder is determined to be a mixture of uranium oxides primarily consisting of UO 3 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1989

Heterogeneous dissemination of projectile materials in the impact melts from Wabar crater, Saudi Arabia

The initial observations of Spencer (1933) that two distinct impact melts coexist at the 90-m-diameter Wabar crater, Saudi Arabia, is confirmed. A dark or 'black' melt contains on the order of 4 percent meteoritic contamination, while the transparent or 'white' melt contains less than 1 percent. The Fe/Ni ratios in both varieties exhibit considerable scatter on electron-microprobe scales, akin to those reported by others for metal spherules in the black melt. If the meteoritic component is subtracted, both melts are chemically very similar. Clasts engulfed by the Wabar melts were investigated also, as they represent the progenitor lithologies from which the melts formed. Bulk compositions for these clasts reveal subtle differences in modal feldspar content within the quartz-rich Wabar target. Both melts require that a minimum of two target lithologies be present in the Wabar melt zone.

Horz, F.↗
NASA NTRS2002

Heterogeneous Distribution of Carbonaceous Material in Murchison Matrix: In Situ Observations Using Energy Filtered Transmission Electron Microscopy

Energy filtered TEM (Transmission Electron Microscopy) has been used to study the location of carbonaceous material in situ in Murchison matrix. Carbon occurs frequently as narrow rims around sulfide grains, but is rare in regions of matrix that are dominated by phyllosilicates. Additional information is contained in the original extended abstract.

Brearley, Adrian J.↗
DOE OSTI2024

AI-NERD: Elucidation of relaxation dynamics beyond equilibrium through AI-informed X-ray photon correlation spectroscopy

Abstract Understanding and interpreting dynamics of functional materials in situ is a grand challenge in physics and materials science due to the difficulty of experimentally probing materials at varied length and time scales. X-ray photon correlation spectroscopy (XPCS) is uniquely well-suited for characterizing materials dynamics over wide-ranging time scales. However, spatial and temporal heterogeneity in material behavior can make interpretation of experimental XPCS data difficult. In this work, we have developed an unsupervised deep learning (DL) framework for automated classification of relaxation dynamics from experimental data without requiring any prior physical knowledge of the system. We demonstrate how this method can be used to accelerate exploration of large datasets to identify samples of interest, and we apply this approach to directly correlate microscopic dynamics with macroscopic properties of a model system. Importantly, this DL framework is material and process agnostic, marking a concrete step towards autonomous materials discovery.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Analytical ultrasonics for evaluation of composite materials response. Part 1: Physical interpretation

The phenomena associated with the propagation of elastic waves in anisotropic materials are discussed. Wave modes propagating in general directions relative to the material coordinate system are not purely longitudinal nor transverse. Hence the generation of ultrasonic waves by common piezoelectric transducers will generate multiple modes to some extent. The received signals will likely be a combination of different modes. When using two transducers to send and receive ultrasonic waves, deviation of the energy flux vector may reduce the apparent value of the received signal unless the proper orientation of the two transducers with respect to one another is taken into account. And application of reflection from plane boundaries for the purposes of making certain measurements may lead to misinterpretation of results unless one is aware of the differences in multiple mode generation and critical angle phenomena between isotropic and anisotropic materials. When studies or characterizations of composite materials by ultrasonics are to be performed, these phenomena must be taken into consideration so that proper and correct application and interpretation of the measurements can be made. Finally, attention must be drawn again to the fact that composite materials are heterogeneous by definition. The results discussed here have been determined for homogeneous materials only. While the assumption of homogeneity appears to be valid for certain wavelength ranges in composites, future work must continue to study the phenomena of wave propagation in anisotropic, nonhomogeneous materials.

Henneke, E. G., II↗
NASA NTRSDate not supplied

Cold Conditions Promote Mg and Si Incorporation in Fe/Si-Rich and Al-Poor X-Ray Amorphous Material in Mars-Relevant Field Environments

X-ray amorphous material that is variably Fe/Si-rich, Al-poor, and volatile containing is prevalent (~15-73 wt.%) within ancient fluvial-lacustrine and eolian sediments examined by the CheMin instrument in Gale crater. Al-rich X-ray amorphous material within Mars-analog environments on Earth has previously been proposed to result from aqueous alteration under cold and icy conditions. However, to the best of our knowledge, no work to date has examined the effects of climate upon the formation of Al-poor and Fe/Si-rich X-ray amorphous material. This study therefore investigates the production of Al-poor and Fe-containing X-ray amorphous material and the chemical heterogeneity within that material under varying temperature conditions to better interpret the formation of Fe-containing X-ray amorphous material detected on Mars.

A D Feldman↗
NASA NTRS1974

Igneous rocks from Apollo 16 rake samples

Results are reported for a study of seven holocrystalline feldspathic rocks (including a spinel troctolite and six melt rocks) and one mare basalt clast from the Apollo-16 rake samples. The composition and grain structure of each rock is described in detail. Only the spinel troctolite is considered a good candidate for a primary igneous cumulate formed during the original differentiation of the lunar crust. It is shown that the melt rocks probably resulted from shock melting followed by rapid crystallization of heterogeneous highland material and that compositional variations are probably due to mixing of various amounts of heterogeneous cumulates and KREEP components. It is suggested that the mare basalt clast may have been derived from Mare Fecunditatis, although the nearest mare to the Apollo-16 site is Nectaris.

Dowty, E.↗
DOE OSTI2025

Deposit and Evaluate Material Across Extremes of Process Windows

Additive manufacturing (AM) can be a viable pathway to fabricate near-net-shape parts for next generation nuclear reactors. Stainless steel 316H (SS 316H) has been identified as a material of interest in the Advanced Materials and Manufacturing Technologies program to accelerate the use of AM for nuclear energy applications. Heterogeneity in material performance is one of the biggest challenges to qualification of AM SS 316H for in-service applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2005

The Insoluble Carbonaceous Material of CM Chondrites as Possible Source of Discrete Organics During the Asteroidal Aqueous Phase

The larger portion of the organic carbon in carbonaceous chondrites (CC) is present as a complex and heterogeneous macromolecular material that is insoluble in acids and most solvents (IOM). So far, it has been analyzed only as a whole by microscopy (TEM) and spectroscopy (IR, NMR, EPR), which have offered and overview of its chemical nature, bonding, and functional group composition. Chemical or pyrolytic decomposition has also been used in combination with GC-MS to identify individual compounds released by these processes. Their value in the recognition of the original IOM structure resides in the ability to properly interpret the decomposition pathways for any given process. We report here a preliminary study of IOM from the Murray meteorite that combines both the analytical approaches described above, under conditions that would realistically model the IOM hydrothermal exposure in the meteorite parent body. The aim is to document the possible release of water and solvent soluble organics, determine possible changes in NMR spectral features, and ascertain, by extension, the effect of this loss on the frame of the IOM residue. Additional information is included in the original extended abstract.

Yabuta, H.↗
DOE OSTI2024

CatTestHub: A benchmarking database of experimental heterogeneous catalysis for evaluating advanced materials

The ability to quantitatively compare newly evolving catalytic materials and technologies is hindered by the widespread availability of catalytic data collected in a consistent manner. While certain catalytic chemistries have been widely studied across decades of scientific research, quantitative comparisons based on literature information is hindered by variability in reaction conditions, types of reported data, and reporting procedures. Here, we present CatTestHub, an open-access database dedicated to benchmarking experimental heterogeneous catalysis data. Combining systematically reported catalytic activity data for selected probe chemistries, with relevant material characterization and reactor configuration information, the database provides a collection of catalytic benchmarks for distinct classes of active site functionality. Through key choices in data access, availability, and traceability, CatTestHub seeks to balance the fundamental information needs of chemical catalysis and the FAIR data design principles. Details of the database architecture and the means through which to navigate it are presented, highlighting examples of catalytic insights readily drawn from the available benchmarking data. In its current iteration, CatTestHub spans over 250 unique experimental data points, collected over 24 solid catalysts, that facilitated the turnover of 3 distinct catalytic chemistries. Here, a roadmap is presented through which to expand the open-access platform that serves as a community wide benchmark, primarily through continuous addition of kinetic information on select catalytic systems by members of the heterogeneous catalysis community at large.

Benchmark↗
NASA NTRS2008

Reliability and Confidence Interval Analysis of a CMC Turbine Stator Vane

High temperature ceramic matrix composites (CMC) are being explored as viable candidate materials for hot section gas turbine components. These advanced composites can potentially lead to reduced weight, enable higher operating temperatures requiring less cooling and thus leading to increased engine efficiencies. However, these materials are brittle and show degradation with time at high operating temperatures due to creep as well as cyclic mechanical and thermal loads. In addition, these materials are heterogeneous in their make-up and various factors affect their properties in a specific design environment. Most of these advanced composites involve two- and three-dimensional fiber architectures and require a complex multi-step high temperature processing. Since there are uncertainties associated with each of these in addition to the variability in the constituent material properties, the observed behavior of composite materials exhibits scatter. Traditional material failure analyses employing a deterministic approach, where failure is assumed to occur when some allowable stress level or equivalent stress is exceeded, are not adequate for brittle material component design. Such phenomenological failure theories are reasonably successful when applied to ductile materials such as metals. Analysis of failure in structural components is governed by the observed scatter in strength, stiffness and loading conditions. In such situations, statistical design approaches must be used. Accounting for these phenomena requires a change in philosophy on the design engineer s part that leads to a reduced focus on the use of safety factors in favor of reliability analyses. The reliability approach demands that the design engineer must tolerate a finite risk of unacceptable performance. This risk of unacceptable performance is identified as a component's probability of failure (or alternatively, component reliability). The primary concern of the engineer is minimizing this risk in an economical manner. The methods to accurately determine the service life of an engine component with associated variability have become increasingly difficult. This results, in part, from the complex missions which are now routinely considered during the design process. These missions include large variations of multi-axial stresses and temperatures experienced by critical engine parts. There is a need for a convenient design tool that can accommodate various loading conditions induced by engine operating environments, and material data with their associated uncertainties to estimate the minimum predicted life of a structural component. A probabilistic composite micromechanics technique in combination with woven composite micromechanics, structural analysis and Fast Probability Integration (FPI) techniques has been used to evaluate the maximum stress and its probabilistic distribution in a CMC turbine stator vane. Furthermore, input variables causing scatter are identified and ranked based upon their sensitivity magnitude. Since the measured data for the ceramic matrix composite properties is very limited, obtaining a probabilistic distribution with their corresponding parameters is difficult. In case of limited data, confidence bounds are essential to quantify the uncertainty associated with the distribution. Usually 90 and 95% confidence intervals are computed for material properties. Failure properties are then computed with the confidence bounds. Best estimates and the confidence bounds on the best estimate of the cumulative probability function for R-S (strength - stress) are plotted. The methodologies and the results from these analyses will be discussed in the presentation.

Murthy, Pappu L. N.↗
NASA NTRSDate not supplied

Benchmarking and Performance of the NASA Multiscale Analysis Tool

The NASA Multiscale Analysis Tool (NASMAT) is as a “plug and play,” software package which utilizes multiscale recursive micromechanics as a platform for massively multiscale modeling of hierarchical materials and structures subjected to thermomechanical. This paper is intended to give an overview of the design of NASMAT and how the design supports modularity, upgradability and maintainability, interoperability, and utility. First, the software architecture and hierarchy will be explored. Details on each of the 11 NASMAT procedures and the arrangement of NASMAT data will be presented. Application program interfaces (APIs) that were developed to facilitate the communication of NASMAT with other programs will be described. The intended application for NASMAT is massively multiscale modeling on high performance computing systems. As such, results benchmarking the performance of the integration of NASMAT with the Abaqus commercial finite element method software are also presented.

Multiscale Modeling↗