Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hard constraint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Viscoelastic responses of a hard transition zone - Effects on postglacial uplifts and rotational signatures

A five-layer viscoelastic spherical model is used to calculate the transient displacements of postglacial rebound, the induced polar motions, and the temporal variations of the geopotential up to degree 8 of the zonal coefficients. Two models - one with two viscoelastic layers separated at 670 km, and the other with three layers in which a hard garnet layer lies between the upper and lower mantle - are compared. Forward modeling shows that it may be possible to discern the presence of a hard garnet layer with a viscosity of at least ten times greater than the upper mantle, on the basis of uplift data near the center of the former Laurentide ice-sheet and from polar wander and j2 data. Temporal variations of higher gravity harmonics, such as j6 and j8, can potentially place even tighter constraints on the rheological properties of the hard transition zone. A lower mantle viscosity between 2 and 4 x 10 to the 22nd Pa is generally preferred in models with a garnet layer which may be as large as 50 times more viscous than the upper mantle.

Spada, Giorgio↗

Convolutional encoding of self-dual codes

There exist almost complete convolutional encodings of self-dual codes, i.e., block codes of rate 1/2 with weights w, w = 0 mod 4. The codes are of length 8m with the convolutional portion of length 8m-2 and the nonsystematic information of length 4m-1. The last two bits are parity checks on the two (4m-1) length parity sequences. The final information bit complements one of the extended parity sequences of length 4m. Solomon and van Tilborg have developed algorithms to generate these for the Quadratic Residue (QR) Codes of lengths 48 and beyond. For these codes and reasonable constraint lengths, there are sequential decodings for both hard and soft decisions. There are also possible Viterbi-type decodings that may be simple, as in a convolutional encoding/decoding of the extended Golay Code. In addition, the previously found constraint length K = 9 for the QR (48, 24;12) Code is lowered here to K = 8.

Solomon, G.↗

Some easily analyzable convolutional codes

Convolutional codes have played and will play a key role in the downlink telemetry systems on many NASA deep-space probes, including Voyager, Magellan, and Galileo. One of the chief difficulties associated with the use of convolutional codes, however, is the notorious difficulty of analyzing them. Given a convolutional code as specified, say, by its generator polynomials, it is no easy matter to say how well that code will perform on a given noisy channel. The usual first step in such an analysis is to computer the code's free distance; this can be done with an algorithm whose complexity is exponential in the code's constraint length. The second step is often to calculate the transfer function in one, two, or three variables, or at least a few terms in its power series expansion. This step is quite hard, and for many codes of relatively short constraint lengths, it can be intractable. However, a large class of convolutional codes were discovered for which the free distance can be computed by inspection, and for which there is a closed-form expression for the three-variable transfer function. Although for large constraint lengths, these codes have relatively low rates, they are nevertheless interesting and potentially useful. Furthermore, the ideas developed here to analyze these specialized codes may well extend to a much larger class.

Mceliece, R.↗

The association of solar millisecond radio spikes with hard X-ray emission

Conventional observational data regarding solar millisecond spikes are compared with data gathered simultaneously in the hard X-ray band by means of a statistical analysis. The analysis considers the association rate, correlation degree, and relative time delays between hard X-ray emissions (in the 25-438 keV range) and radio-spike events. About 95 percent of the radio-spike bursts occur during impulsive hard X-ray bursts, and approximately 43 percent of the compared events are characterized by hard X-ray time profiles that mimic the concentration of simultaneous radio spikes. The delay of the radio emission with respect to the hard X-ray bursts puts some constraints on the acceleration and propagation of particles. The time delays and the quantization into discrete radio events are theorized to be caused by the operation of the accelerator.

Guedel, M.↗

EC 19314 - 5915 - A bright, eclipsing cataclysmic variable from the Edinburgh-Cape Blue Object Survey

A deeply eclipsing cataclysmic variable, with an orbital period of 4.75 hr, has been discovered in the southern Edinburgh-Cape Blue Object Survey. The star, EC 19314 - 5915, lies close to the positional constraints of a previously unidentified HEAO-1 hard X-ray source, 1H1930 - 5989. Its optical spectrum is unusual in that it shows, apart from the emission lines characteristic of a novalike, or dwarf nova cataclysmic variable (Balmer, He I and He II), metallic absorption lines typical of a late-G star. The individual time-resolved spectra, with the tertiary absorption lines removed, show absorption reversals in the Balmer emission lines, increasing in strength for the higher series. The Balmer emission radial velocities are therefore severely distorted in comparison to the He II 4686-A emission and He I 4471-A absorption radial velocity curves. An independent distance estimate of about 600 pc is derived for EC19314 - 5915, from the spectroscopic parallax of the third star.

Buckley, D. A. H.↗

Comparison of theoretically predicted and observed Solar Maximum Mission X-ray spectra for the 1980 April 13 and May 9 flares

A method for predicting the hard X-ray spectrum in the 10-100 keV range for compact flares during their initial rise is developed on the basis of a thermal model. Observations of the flares of 1980 April 13, 4:05 U.T., and 1980 May 9, 7:12 U.T. are given and their combined spectra from the Hard X-ray Burst Spectrometer and Hard X-ray Imaging Spectrometer on the Solar Maximum Mission are deduced. Constraints on the cross sectional area of the supposed emitting arch are obtained from data from the Hard X-ray Imaging Spectrometer. A power-law spectrum is predicted for the rise of the flare of April 13 for initial arch densities less than 10 to the 10th per cu cm and also for the flare of May 9 for initial arch densities less than 5.4 x 10 to the 10th per cu cm. In both cases power-law spectra are observed. Limitations and implications of these results are discussed.

Smith, D. F.↗

The pulsar contribution to galactic cosmic ray positrons

Measurements of high energy positrons in the cosmic rays appear to show an increase in the positron fraction above 10 GeV which is inconsistent with theoretical predictions of secondary positron production. We explore the possibility that observations of .1 - 1 GeV and very high energy (VHE) gamma-rays from the Crab and Vela pulsars could imply a significant primary positron contribution from galactic radio pulsars at energies above 10 GeV. Assuming that positrons are produced through magnetic pair creation in the cascades near the polar cap which may be the source of the observed gamma rays, we can estimate the flux and spectrum of the pulsar positron contribution. The pulsar positron component has a flatter spectrum than that expected from secondary cosmic ray production. The level of this contribution above 10 GeV is high enough to make pulsars viable sources of the high energy positron excess, and may also put interesting constraints on pulsar emission models.

Harding, Alice K.↗

Evaluation of Open-Source Hard Real Time Software Packages

Reliable software is, at times, hard to find. No piece of software can be guaranteed to work in every situation that may arise during its use here at Glenn Research Center or in space. The job of the Software Assurance (SA) group in the Risk Management Office is to rigorously test the software in an effort to ensure it matches the contract specifications. In some cases the SA team also researches new alternatives for selected software packages. This testing and research is an integral part of the department of Safety and Mission Assurance. Real Time operation in reference to a computer system is a particular style of handing the timing and manner with which inputs and outputs are handled. A real time system executes these commands and appropriate processing within a defined timing constraint. Within this definition there are two other classifications of real time systems: hard and soft. A soft real time system is one in which if the particular timing constraints are not rigidly met there will be no critical results. On the other hand, a hard real time system is one in which if the timing constraints are not met the results could be catastrophic. An example of a soft real time system is a DVD decoder. If the particular piece of data from the input is not decoded and displayed to the screen at exactly the correct moment nothing critical will become of it, the user may not even notice it. However, a hard real time system is needed to control the timing of fuel injections or steering on the Space Shuttle; a delay of even a fraction of a second could be catastrophic in such a complex system. The current real time system employed by most NASA projects is Wind River's VxWorks operating system. This is a proprietary operating system that can be configured to work with many of NASA s needs and it provides very accurate and reliable hard real time performance. The down side is that since it is a proprietary operating system it is also costly to implement. The prospect of replacing this somewhat costly implementation is the focus of one of the SA group s current research projects. The explosion of open source software in the last ten years has led to the development of a multitude of software solutions which were once only produced by major corporations. The benefits of these open projects include faster release and bug patching cycles as well as inexpensive if not free software solutions. The main packages for hard real time solutions under Linux are Real Time Application Interface (RTAI) and two varieties of Real Time Linux (RTL), RTLFree and RTLPro. During my time here at NASA I have been testing various hard real time solutions operating as layers on the Linux Operating System. All testing is being run on an Intel SBC 2590 which is a common embedded hardware platform. The test plan was provided to me by the Software Assurance group at the start of my internship and my job has been to test the systems by developing and executing the test cases on the hardware. These tests are constructed so that the Software Assurance group can get hard test data for a comparison between the open source and proprietary implementations of hard real time solutions.

Mattei, Nicholas S.↗

A Scheduling Algorithm for Replicated Real-Time Tasks

We present an algorithm for scheduling real-time periodic tasks on a multiprocessor system under fault-tolerant requirement. Our approach incorporates both the redundancy and masking technique and the imprecise computation model. Since the tasks in hard real-time systems have stringent timing constraints, the redundancy and masking technique are more appropriate than the rollback techniques which usually require extra time for error recovery. The imprecise computation model provides flexible functionality by trading off the quality of the result produced by a task with the amount of processing time required to produce it. It therefore permits the performance of a real-time system to degrade gracefully. We evaluate the algorithm by stochastic analysis and Monte Carlo simulations. The results show that the algorithm is resilient under hardware failures.

Yu, Albert C.↗

Sub-second variations of high energy ( 300 keV) hard X-ray emission from solar flares

Subsecond variations of hard X-ray emission from solar flares were first observed with a balloon-borne detector. With the launch of the Solar Maximum Mission (SMM), it is now well known that subsecond variations of hard X-ray emission occur quite frequently. Such rapid variations give constraints on the modeling of electron energization. Such rapid variations reported until now, however, were observed at relatively low energies. Fast mode data obtained by the Hard X-ray Burst Spectrometer (HXRBS) has time resolution of approximately 1 ms but has no energy resolution. Therefore, rapid fluctuations observed in the fast-mode HXRBS data are dominated by the low energy hard X-rays. It is of interest to know whether rapid fluctuations are observed in high-energy X-rays. The highest energy band at which subsecond variations were observed is 223 to 1057 keV. Subsecond variations observed with HXRBS at energies greater than 300 keV are reported, and the implications discussed.

Bai, Taeil↗

Viterbi decoding for satellite and space communication.

Convolutional coding and Viterbi decoding, along with binary phase-shift keyed modulation, is presented as an efficient system for reliable communication on power limited satellite and space channels. Performance results, obtained theoretically and through computer simulation, are given for optimum short constraint length codes for a range of code constraint lengths and code rates. System efficiency is compared for hard receiver quantization and 4 and 8 level soft quantization. The effects on performance of varying of certain parameters relevant to decoder complexity and cost are examined. Quantitative performance degradation due to imperfect carrier phase coherence is evaluated and compared to that of an uncoded system. As an example of decoder performance versus complexity, a recently implemented 2-Mbit/sec constraint length 7 Viterbi decoder is discussed. Finally a comparison is made between Viterbi and sequential decoding in terms of suitability to various system requirements.

Heller, J. A.↗

Avionics for a Small Robotic Inspection Spacecraft

A report describes the tentative design of the avionics of the Mini-AERCam -- a proposed 7.5-in. (approximately 19-cm)-diameter spacecraft that would contain three digital video cameras to be used in visual inspection of the exterior of a larger spacecraft (a space shuttle or the International Space Station). The Mini-AERCam would maneuver by use of its own miniature thrusters under radio control by astronauts inside the larger spacecraft. The design of the Mini-AERCam avionics is subject to a number of constraints, most of which can be summarized as severely competing requirements to maximize radiation hardness and maneuvering, image-acquisition, and data-communication capabilities while minimizing cost, size, and power consumption. The report discusses the design constraints, the engineering approach to satisfying the constraints, and the resulting iterations of the design. The report places special emphasis on the design of a flight computer that would (1) acquire position and orientation data from a Global Positioning System receiver and a microelectromechanical gyroscope, respectively; (2) perform all flight-control (including thruster-control) computations in real time; and (3) control video, tracking, power, and illumination systems.

Abbott, Larry↗

Short-lived solar burst spectral component at f approximately 100 GHz

A new kind of burst emission component was discovered, exhibiting fast and distinct pulses (approx. 60 ms durations), with spectral peak emission at f approx. 100 GHz, and onset time coincident to hard X-rays to within approx. 128 ms. These features pose serious constraints for the interpretation using current models. One suggestion assumes the f approx. 100 GHz pulses emission by synchrotron mechanism of electrons accelerated to ultrarelativistic energies. The hard X-rays originate from inverse Compton scattering of the electrons on the synchrotron photons. Several crucial observational tests are needed for the understanding of the phenomenon, requiring high sensitivity and high time resolution (approx. 1 ms) simultaneous to high spatial resolution (0.1 arcsec) at f approx. 110 GHz and hard X-rays.

Kaufmann, P.↗

Simulation results for the Viterbi decoding algorithm

Concepts involved in determining the performance of coded digital communications systems are introduced. The basic concepts of convolutional encoding and decoding are summarized, and hardware implementations of sequential and maximum likelihood decoders are described briefly. Results of parametric studies of the Viterbi decoding algorithm are summarized. Bit error probability is chosen as the measure of performance and is calculated, by using digital computer simulations, for various encoder and decoder parameters. Results are presented for code rates of one-half and one-third, for constraint lengths of 4 to 8, for both hard-decision and soft-decision bit detectors, and for several important systematic and nonsystematic codes. The effect of decoder block length on bit error rate also is considered, so that a more complete estimate of the relationship between performance and decoder complexity can be made.

Batson, B. H.↗

Origin of 0.511 MeV emission from the Galactic center

The observations of 0.511 MeV positron annihilation radiation from the direction of the Galactic center are reviewed, and the implications of the line intensity, the shape of the line, and the position and angular size of the line emission region are discussed. These observations appear to require a compact source at the Galactic center, and within the constraints of both the 0.511 MeV observations and the hard X-ray, infrared and radio observations, a model is proposed of positron production and annihilation around a massive black hole in the Galactic nucleus.

Lingenfelter, R. E.↗

The Average Intensity and Spectral Evolution of Batse Cosmic Gamma-Ray Bursts

Statistical studies of BATSE gamma-ray bursts are presented: we average the time profiles, aligning the events at their highest peaks. Using the time histories in different energy channels, we summarize the general features of the average intensity and spectral evolution of gamma-ray bursts (GRBS) and compare the average evolution of bright and dim events. While no differences are found between the average intensity histories, the average hardness ratio histories demonstrate a hardness/brightness correlation. The observed lack of differences between the intensity histories of bright and dim bursts is incompatible with cosmological time dilation effects predicted by simple cosmological models. The combined results of no intensity history difference but a hardness history difference between bright and dim bursts places constraints on galactic models for the origin of GRBS.

Mitrofanov, Igor G.↗

Radiation-Hard Smart-Pixel Detector ASIC ReadOut with Digital AI in 28nm

Detectors at future high energy colliders will face enormous technical challenges. Disentangling the unprecedented numbers of particles expected in each event will require highly granular silicon pixel detectors with billions of readout channels. With event rates as high as 40 MHz, these detectors will generate petabytes of data per second. To enable discovery within strict bandwidth and latency constraints, future trackers must be capable of fast, power efficient, and radiation hard data-reduction at the source. This effort is pursuing the co-design development of high-performance readout smart pixel ASICs for a future Phase III High Luminosity upgrade of the Large Hadron Collider. A 1.6mm2 ASIC prototype was designed by Fermilab in CMOS 28 nm bulk process and submitted for manufacturing in February 2024. It leverages the analog front-end pixel design of a previous prototype fabricated and tested in 2023, which achieved a simulated detection level of ~400e- with 30fF input capacitance. The ROIC consists of two matrices of 16×16 smart pixels, each 25×25 μm2 in size. Each smart pixel contains a charge-sensitive preamplifier with leakage current compensation and three auto-zero comparators for a 2-bit flash-type ADC. There is digital space for the integration of our fully combinatorial AI that performs momentum classification at the bunch crossing rate. The total power consumption is ∼6μW per pixel, which corresponds to ~1mW/cm2. The ASIC incorporates programmable front-end charge injection circuitry to generate pixel cluster charges during characterization. The cluster profile will be generated to duplicate hit characteristics of various momentum (pT). We will present early results from chip testing.

Parpillon, Benjamin↗