Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphite crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Crystal structure of graphite under room-temperature compression and decompression

Recently, sophisticated theoretical computational studies have proposed several new crystal structures of carbon (e.g., bct-C{sub 4}, H-, M-, R-, S-, W-, and Z-carbon). However, until now, there lacked experimental evidence to verify the predicted high-pressure structures for cold-compressed elemental carbon at least up to 50 GPa. Here we present direct experimental evidence that this enigmatic high-pressure structure is currently only consistent with M-carbon, one of the proposed carbon structures. Furthermore, we show that this phase transition is extremely sluggish, which led to the observed broad x-ray diffraction peaks in previous studies and hindered the proper identification of the post-graphite phase in cold-compressed carbon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Well-crystallized nitrogen-rich graphitic carbon nitride nanocrystallites prepared via solvothermal route at low temperature

A solvothermal method has been successfully applied to prepare crystalline carbon nitride from C{sub 3}N{sub 3}Cl{sub 3} and NaN{sub 3} in CCl{sub 4} at 180 deg. C without any catalyst. The final product was a reddish brown powder. X-ray diffraction pattern indicated that the prepared powder was well-crystallized graphitic carbon nitride. The atomic N/C ratio determined by combustion method was 1.63, indicating a high nitrogen concentration. XPS and FTIR studies showed that graphite-like sp{sup 2} bonded structure existed in the sample. Nanometer scale spherical particles and crinkly lamellas were found in the TEM morphologies.

36 MATERIALS SCIENCE↗

Quantum limit studies in single crystal and pyrolytic graphite

The occupied regions of momentum space in graphite are confined to elongated volumes near the hexagonal Brillouin zone edges. The elongation is along the hexagonal axis (c-axis), so that cross sectional areas perpendicular to that axis are very small. When magnetic fields are applied parallel to the c-axis, only the n = 0 Landau levels remain below the Fermi energy for fields above 7 tesla. The energy bands in graphite can be described by a set of seven parameters (including the Fermi energy as a parameter). In a quantizing magnetic field the Landau levels are described by a secular equation determined by diagonalizing the Hamiltonian. A major feature for the levels along the Brillouin zone edge is that the n = 0 Landau level for electrons is independent of magnetic field, while that for holes is field-dependent.

Woollam, J. A.↗

Quantum limit studies in single-crystal and pyrolytic graphite

The occupied regions of momentum space in graphite are confined to very elongated volumes near the hexagonal Brillouin zone edges. The elongation is along the hexagonal axis (c axis) so that cross-sectional areas perpendicular to that axis are very small. Hence, when magnetic fields are applied parallel to the c axis only the n = 0 Landau levels remain below the Fermi energy for fields above 7 T (Woollam, 1971). The energy bands in graphite can be described by a set of seven parameters (McClure, 1971) (including the Fermi energy as a parameter). In a quantizing magnetic field the Landau levels are described by a secular equation determined by diagonalizing the Hamiltonian (McClure, 1960). A major unusual feature for the levels along the Brillouin zone edge is that the n = 0 Landau level for electrons is independent of magnetic field, while that for holes is field dependent.

Woollam, J. A.↗

Radial Breathing Modes in Cosmochemistry and Meteoritics

One area of continuing interest in cosmochemistry and meteoritics (C&M) is the identification of the nature of Q-phase, although some researchers in C&M are not reporting relevant portions of Raman spectral data. Q is the unidentified carrier of noble gases in carbonaceous chondrites (CCs). Being carbonaceous, the focus has been on any number of Q-candidates arising from the sp2 hybridization of carbon (C). These all derive from various forms of graphene, a monolayer of C atoms packed into a two-dimensional (2D) hexagonal honeycomb lattice that is the basic building block for graphitic materials of all other dimensions for sp2 allotropes of C. As a basic lattice, 2D graphene can be curled into fullerenes (0D), wrapped into carbon nanotubes or CNTs (1D), and stacked into graphite (3D). These take such additional forms as scroll-like carbon whiskers, carbon fibers, carbon onions, GPCs (graphite polyhedral crystals) [6], and GICs (graphite intercalation compounds). Although all of these have been observed in meteoritics, the issue is which can explain the Q-abundances. In brief, one or more of the 0D-3D sp2 hybridization forms of C is Q. For some Q-candidates, the radial breathing modes (RBMs) are the most important Raman active vibrational modes that exist, and bear a direct relevance to solving this puzzle. Typically in C&M they are ignored when present. Their importance is addressed here as smoking-gun signatures for certain Q-candidates and are very relevant to the ultimate identification of Q.

Wilson, T.L.↗

Tuning Metastability of Poly(3-hexyl thiophene) Solutions to Enable in Situ Atomic Force Microscopy Imaging of Surface Nucleation

Poly(3-hexyl thiophene) (P3HT), a workhorse material for the study of organic electronic devices, assembles into nanofibers (NFs) upon crystallization from solution, providing the means to tailor morphology and improve device performance. We investigate how P3HT regioregularity, molecular weight, and concentration influence the hysteresis between crystallization and melting temperatures of NFs. Hysteresis is found to increase with molecular weight and reach an asymptote for polymer chains above the chain folding threshold (Mn > 12 kg/mol). Regioregularity does not substantially affect the hysteresis above a level of 88%, while increasing polymer concentration is found to reduce hysteresis. This insight facilitates in situ high-resolution atomic force microscopy measurements that provide better understanding of the mechanism of NF crystallization on graphite. We find an interchain distance (along the a crystallographic axis) of 16.7 ± 0.7 Å, and a spacing of 7.7 ± 0.2 Å along the c axis, suggesting that the crystals on graphite are form I.

36 MATERIALS SCIENCE↗

Kelvin probe characterization of buried graphitic microchannels in single-crystal diamond

In this work, we present an investigation by Kelvin Probe Microscopy (KPM) of buried graphitic microchannels fabricated in single-crystal diamond by direct MeV ion microbeam writing. Metal deposition of variable-thickness masks was adopted to implant channels with emerging endpoints and high temperature annealing was performed in order to induce the graphitization of the highly-damaged buried region. When an electrical current was flowing through the biased buried channel, the structure was clearly evidenced by KPM maps of the electrical potential of the surface region overlying the channel at increasing distances from the grounded electrode. The KPM profiling shows regions of opposite contrast located at different distances from the endpoints of the channel. This effect is attributed to the different electrical conduction properties of the surface and of the buried graphitic layer. The model adopted to interpret these KPM maps and profiles proved to be suitable for the electronic characterization of buried conductive channels, providing a non-invasive method to measure the local resistivity with a micrometer resolution. The results demonstrate the potential of the technique as a powerful diagnostic tool to monitor the functionality of all-carbon graphite/diamond devices to be fabricated by MeV ion beam lithography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanism of Ball Milling Effect on Carbothermic Reduction of Industrial Magnesia by Coke

Mechanical milling always improves the chemical reaction rate in the metallurgy process. The experiment proved that ball milling treatment on raw materials, including industrial magnesia, metallurgical coke, and fluoride calcium, could increase greatly the reaction rate of magnesia. The reaction samples and residues were analyzed by particle size measurement, X-ray diffraction (XRD) analysis, Raman spectroscopy analysis, scanning electron microscope (SEM), and transmission electron microscope (TEM). The results suggested that the positive effect of ball milling on the reaction rate came from three aspects. Ball milling could decrease magnesia particle size and peel coke into graphite sheets to enlarge their contact surface. Meanwhile, ball milling could slightly destroy the crystal grain surface of magnesia and decrease the crystallization of graphite. The nanometer-scale magnesia particles and graphite sheets would stably and strongly attract together after a longer time ball milling. The possible evolution of the particles during ball milling was given, which explained the mechanism of the ball milling effect on the carbothermic reduction of industrial magnesia by coke.

36 MATERIALS SCIENCE↗

Ultrastructures and Mechanics of Annealed Nephila clavipes Major Ampullate Silk

The semicrystalline protein structure and impressive mechanical properties of major ampullate (MA) spider silk make it a promising natural alternative to polyacrylonitrile (PAN) fibers for carbon fiber manufacture. However, when annealed using a similar procedure to carbon fiber production, the tensile strength and Young’s modulus of MA silk decrease. Despite this, MA silk fibers annealed at 600 °C remain stronger and tougher than similarly annealed PAN but have a lower Young’s modulus. Although MA silk and PAN graphitize to similar extents, annealing disrupts the hydrogen bonding that controls crystal alignment within MA silk. Consequently, unaligned graphite crystals form in annealed MA silk, causing it to weaken, while graphite crystals in PAN maintain alignment along the fiber axis, strengthening the fibers. Finally, these shortcomings of spider silk when annealed provide insights into the selection and design of future alternative carbon fiber precursors.

36 MATERIALS SCIENCE↗

TATB ratchet growth and hydrostatically-confined PBX 9502

The explosive TATB (1,3,5-triamino-2,4,6-trinitirobenzene) is formulated with various polymeric binders to create plastic-bonded explosives like PBX 9502 (95 wt% TATB and 5 wt% Kel-F binder). TATB crystals are graphitic and plate-like in nature and single crystals exhibit anisotropic thermal expansion where the direction normal to the platelet surface grows 10-20 times more than the in-plane platelet direction. Compactions of TATB, with and without binder, exhibit irreversible volume expansion, also known as ratchet growth, when thermal cycled to hot or cold temperatures. Specifically, when TATB-based compactions return to ambient after a temperature excursion away from room temperature, the volume of the specimen is slightly larger. Repeated thermal cycles can reduce the density by 1 to 2%. Axial confinement on a cylindrical specimen has previously been shown by us to suppress growth in the confining direction but then increase growth in the unconfined directions (likely due to creep effects). In the work presented here, PBX 9502 specimens were placed in cup assemblies where they were embedded in Sylgard (an incompressible silicon resin) to provide hydrostatic confinement when the assemblies were placed under different axial loads. The loaded cup assemblies were thermally cycled 10 times to hot and cold temperatures. Finally, results show that increasing the hydrostatic confining pressure causes a decrease in the PBX 9502 volume expansion that occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coefficient of Thermal Expansion during Ratchet Growth of TATB Compactions

Triamino trinitrobenzene (TATB) is an insensitive high explosive, meaning that it is quite immune from accidental detonation and only performs in appropriately engineered configurations. While this is advantageous for applications, the TATB crystal is graphitic and possesses significant thermal and mechanical anisotropy. Compactions of TATB crystals, with or without binder, have been shown to have oriented TATB crystals that relate to the pressing geometry and process, and this TATB texture necessarily imparts microscale and macroscale anisotropy to the compaction. By a mechanism not fully understood, thermal cycling results in irreversible volume expansion (also called ratchet growth) of the compaction likely by creating stress points on the microscale. Changes in density caused by thermal cycling can certainly effect the explosive performance. Our past characterization of the ratchet growth phenomenon has focused on the magnitude of the irreversible strain as measured before and after a thermal cycle. Finally, in the work presented here, we analyze the evolving thermal expansion behavior during the ascending and descending temperature ramps, providing further insight into the material changes taking place during the ratchet growth phenomenon.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Performance characterization of x-ray crystal spectroscopy highly oriented pyrolytic graphite reflectors based on x-ray diffractometry experiments

The use of Highly Oriented Pyrolytic Graphite (HOPG) reflectors is often proposed in the design of X-ray Crystal Spectroscopy (XCS) diagnostic systems for the next-generation tokamak devices, including the ITER project. Here, this study introduces an experimental study based on the X-Ray Diffractometry (XRD) method to evaluate the performance of HOPG reflectors. The experimental method provides both the angular responses and the reflectivities of the HOPG reflectors. A demonstrative XRD experiment is conducted, and the details of the experiment are introduced. This method enables precise studies on HOPG reflectors, facilitating the design of XCS diagnostic systems for future tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The OSO-8 mosaic graphite stellar X-ray polarimeter

The OSO 8 satellite, launched on June 21, 1975, contains two X-ray polarimeters. These polarimeters use mosaic crystals of graphite to yield polarization-sensitive Bragg reflection of stellar X-rays. The crystals reflect a narrow energy bandwidth centered at 2.6 and 5.2 keV. The polarimeter background signal is minimized by mounting the crystals on parabolic surfaces which focus the diffracted X-rays onto small-area beryllium-window proportional counters. This technique permits the observation of low-intensity X-ray sources and reduces the possibility of systematic background effects which could lead to a false signature of polarization. A description of the instrument is given, and preliminary results for the Crab Nebula and Cyg X-1 are presented.

Novick, R.↗

The X-ray polarization experiment on the OSO-8

The OSO-8 satellite, launched on June 21, 1975 contains two X-ray polarimeters. These polarimeters use mosaic crystals of graphite to yield polarization-sensitive Bragg reflection of stellar X-rays. The crystals reflect a narrow energy bandwidth centered at 2.6 and 5.2 keV. The polarimeter background signal is minimized by mounting the crystals on parabolic surfaces which focus the diffracted X-rays onto small-area, beryllium-window proportional counters. This technique permits the observation of low-intensity X-ray sources and reduces the possibility of systematic background effects which could lead to a false signature of polarization. A description of the instrument is given, and the sensitivity to polarization, particularly in regard to binary sources, is discussed. Preliminary results for Cen X-3 and GX5-1 are presented.

Weisskopf, M. C.↗

Graphitic encapsulation of MgO and Fe{sub 3}C nanoparticles in the reaction of iron pentacarbonyl with magnesium

A simple method to produce highly ordered carbon nanostructures by combustion synthesis is presented. Graphite-encapsulated magnesium oxide, iron carbide nanoparticles and carbon nanobelts were synthesized by the one-step reduction of iron pentacarbonyl with magnesium. High-resolution transmission electron microscopy analysis of the products revealed nanocrystalline MgO and Fe{sub 3}C particles surrounded by a well-crystallized, tight graphite film. The possible formation mechanism is presented and discussed. - Highlights: • We present a simple method to produce highly ordered carbon nanostructures by combustion synthesis. • The cubic MgO particles are completely coated by tight graphitic shells. • The mechanism of formation a distant carbon film on MgO surface has been discussed. • The presented method can be applied to synthesis of other core-shell structures.

36 MATERIALS SCIENCE↗

Fundamentals and emerging optical applications of hexagonal boron nitride: a tutorial

Hexagonal boron nitride (hBN), also known as white graphite, is a transparent layered crystal with a wide bandgap. Its crystal structure resembles graphite, featuring layers composed of honeycomb lattices held together through van der Waals forces. The layered crystal structure of hBN facilitates exfoliation into thinner flakes and makes it highly anisotropic in in-plane and out-of-plane directions. Unlike graphite, hBN is both insulating and transparent, making it an ideal material for isolating devices from the environment and acting as a waveguide. As a result, hBN has found extensive applications in optical devices, electronic devices, and quantum photonic devices. This comprehensive tutorial aims to provide readers with a thorough understanding of hBN, covering its synthesis, lattice and spectroscopic characterization, and various applications in optoelectronic and quantum photonic devices. This tutorial is designed for both readers without prior experience in hBN and those with expertise in specific fields seeking to understand its relevance and connections to others.

36 MATERIALS SCIENCE↗

Characterization of LiFePO{sub 4} cathode by addition of graphene for lithium ion batteries

The improvement of LiFePO{sub 4} (LFP) cathode performance has been performed by addition of Graphene (LFP+Graphene). The cathode was prepared from the active material with 5 wt % graphene and 10 wt % polyvinylidene fluoride in an n-methyl pyrrolidone solvent. Another cathode material used only 5% artificial graphite for comparison (LFP+Graphite). The crystal structure, microstructure, electronic conductivity, electrochemical impedance spectroscopy (EIS) of the cathodes were characterized by X-ray diffraction, SEM, and Impedance spectroscopy, respectively. Two half cell coin batteries were assembled using a lithium metal as an anode and LiPf{sub 6} as an electrolyte, and two cathodes (LFP+Graphene) and (LFP+Graphite). Charge discharge performance of battery was characterized by Battery analyser (BTS 8). The electronic conductivity of cathode with grapheme increased of about one order magnitude compared with the only cathode with graphite, namely from 1.97E-7S/cm (LFP+Graphite) to 1.92E-6S/cm (LFP+Graphene). The charge-discharge capacity after 10{sup th} cycles of LiFePO{sub 4} with graphene decreased of about 0.68% from 114.3 mAh/g to113.1 mAh/g, while LFP with graphite decreased of about 2.84% from 110.2 mAh/g to 107.1 mAh, at 0.1C-rates. It could be concluded that the addition of graphene has increased the ionic conductivity, and improved performance of the LFP lithium ion battery, such as higher capacity and better efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗