Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fog”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhancing characterization of organic nitrogen components in aerosols and droplets using high-resolution aerosol mass spectrometry

Abstract. This study aims to enhance the understanding and application of the Aerodyne high-resolution aerosol mass spectrometer (HR-AMS) for the comprehensive characterization of organic nitrogen (ON) compounds in aerosol particles and atmospheric droplets. To achieve this goal, we analyzed 75 N-containing organic compounds, representing a diverse range of ambient non-organonitrate ON (NOON) types, including amines, amides, amino acids, N heterocycles, protein, and humic acids. Our results show that NOON compounds can produce significant levels of NHx+ and NOx+ ion fragments, which are typically recognized as ions representative of inorganic nitrogen species. We also identified the presence of CH2N+ at m/z = 28.0187, an ion fragment rarely quantified in ambient datasets due to substantial interference from N2+. As a result, the utilization of an updated calibration factor of 0.79 is necessary for accurate NOON quantification via the HR-AMS. We also assessed the relative ionization efficiencies (RIEs) for various NOON species and found that the average RIE for NOON compounds (1.52 ± 0.58) aligns with the commonly used default value of 1.40 for organic aerosol. Moreover, through a careful examination of the HR-AMS mass spectral features of various NOON types, we propose fingerprint ion series that can aid the NOON speciation analysis. For instance, the presence of CnH2n+2N+ ions is closely linked with amines, with CH4N+ indicating primary amines, C2H6N+ suggesting secondary amines, and C3H8N+ representing tertiary amines. CnH2nNO+ ions (especially for n values of 1–4) are very likely derived from amides. The co-existence of three ions, C2H4NO2+, C2H3NO+, and CH4NO+, serves as an indicator for the presence of amino acids. Additionally, the presence of CxHyN2+ ions indicates the occurrence of 2N-heterocyclic compounds. Notably, an elevated abundance of NH4+ is a distinct signature for amines and amino acids, as inorganic ammonium salts produce only negligible amounts of NH4+ in the HR-AMS. Finally, we quantified the NOON contents in submicron particles (PM1) and fog water in Fresno, California, and PM1 in New York City (NYC). Our results revealed the substantial presence of amino compounds in both Fresno and NYC aerosols, whereas concurrently collected fog water in Fresno contained a broader range of NOON species, including N-containing aromatic heterocycle (e.g., imidazoles) and amides. These findings highlight the significant potential of employing the widespread HR-AMS measurements of ambient aerosols and droplets to enhance our understanding of the sources, transformation processes, and environmental impacts associated with NOON compounds in the atmosphere.

Ge, Xinlei (ORCID:0000000195316478)↗
DOE OSTI2024

Enhancing characterization of organic nitrogen components in aerosols and droplets using high-resolution aerosol mass spectrometry

This study aims to enhance the understanding and application of the Aerodyne high-resolution aerosol mass spectrometer (HR-AMS) for comprehensive characterization of organic nitrogen (ON) compounds in aerosol particles and atmospheric droplets. To achieve this, we analyzed seventy-five N-containing organic compounds, representing a diverse range of ambient ON types, including amines, amides, amino acids, N-heterocycles, protein, and humic acids. Our results show that ON compounds can produce significant levels of NH x + and NO x + ion fragments, which are typically recognized as ions representative of inorganic nitrogen species. We also discovered the presence of CH 2 N + at m/z = 28.0187, an ion fragment that is rarely quantified in ambient datasets due to substantial interference from air-related N 2 + . As a result, we determined that an updated calibration factor of 0.79 is necessary to accurately quantify ON content using aerosol mass spectrometry. We also assessed the relative ionization efficiencies (RIEs) for different ON species and found that the average RIE of ON compounds (1.52 ± 0.58) aligns with the commonly used default value of 1.40 for organic aerosol (OA). Moreover, through a careful examination of the HR-AMS mass spectral features of various ON types, we propose fingerprint ion series that can aid the ON speciation analysis. The presence of C n H 2n+2 N + ions is closely linked with amines, with CH 4 N + indicating primary amines, C 2 H 6 N + suggesting secondary amines, and C 3 H 8 N + representing tertiary amines. C n H 2n NO + ions (especially for n values of 1–4) are very likely derived from amides. The co-existence of three ions, C 2 H 4 NO 2 + , C 2 H 3 NO + , and CH 4 NO + , serves as an indicator for the presence of amino acids. Additionally, the presence of C x H y N 2 + ions indicates the occurrence of 2N-heterocyclic compounds. Notably, an elevated abundance of NH 4 + is a distinct signature for amines and amino acids, as inorganic ammonium salts produce only negligible amounts of NH 4 + in HR-AMS. Finally, we quantified the ON contents in submicron particles (PM 1 ) and fog waters in Fresno, California and PM 1 in New York City (NYC). Our results revealed the substantial presence of amino compounds in both Fresno and NYC aerosols, whereas concurrently collected fog waters contained a broader range of ON species, including N-containing aromatic heterocycle (e.g., imidazoles) and amides. These findings highlight the significant potential of employing the widespread HR-AMS measurements of ambient aerosols and droplets to enhance our understanding of the sources, transformation processes, and environmental impacts associated with ON compounds in the atmosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Defect-resistant plastic scintillation radiation detector compositions and fabrication methods

Scintillating plastics resistant to crazing and fogging, methods of making and using the same are disclosed. The scintillating plastics include: one or more primary polymers present in an amount ranging from about 40 wt % to about 95 wt %; one or more secondary polymers present in an amount ranging from about 1 wt % to about 60 wt %; and one or more fluors present in an amount ranging from about 0.1 wt % to about 50 wt %. Methods of making such plastics include: creating a homogenous mixture of precursor materials including primary polymer, secondary polymer, and fluor in the amounts set forth above; and polymerizing the homogenous mixture. Methods of using such plastics include: exposing the scintillating plastic to one or more extreme environmental conditions for a predetermined amount of time without generating crazing or fogging within the scintillating plastic. Various additional features and specific embodiments of these inventive concepts are also disclosed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hydrothermal aging-resistant plastic scintillator formulations

A plastic scintillator includes an anti-fog additive or comonomer. The plastic scintillator is formulated to resist the development of hydrothermally-induced aging defects (e.g. discoloration and “fogging”) while maintaining scintillation light output and other desirable physical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cyber-Physical System Implementation for Manufacturing With Analytics in the Cloud Layer

Effective and efficient modern manufacturing operations require the acceptance and incorporation of the fourth industrial revolution, also known as Industry 4.0. Traditional shop floors are evolving their production into smart factories. To continue this trend, a specific architecture for the cyber-physical system is required, as well as a systematic approach to automate the application of algorithms and transform the acquired data into useful information. This work makes use of an approach that distinguishes three layers that are part of the existing Industry 4.0 paradigm: edge, fog, and cloud. Each of the layers performs computational operations, transforming the data produced in the smart factory into useful information. Trained or untrained methods for data analytics can be incorporated into the architecture. A case study is presented in which a real-time statistical control process algorithm based on control charts was implemented. The algorithm automatically detects changes in the material being processed in a computerized numerical control (CNC) machine. The algorithm implemented in the proposed architecture yielded short response times. The performance was effective since it automatically adapted to the machining of aluminum and then detected when the material was switched to steel. The data were backed up in a database that would allow traceability to the line of g-code that performed the machining.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Life Cycle Analysis of Renewable Natural Gas and Lactic Acid Production from Waste Feedstocks

Producing fuels and chemicals from waste is considered economically favorable, due to low feedstock cost, and environmentally favorable, due to avoided emissions from conventional waste management practices. In this study, we evaluate the life cycle greenhouse gas (GHG) emission reduction benefits of renewable natural gas (RNG) and lactic acid (LA) production from four types of wet waste feedstocks (wastewater sludge, food waste, swine manure, and fats, oil, and grease [FOG]) via anaerobic digestion (AD) and LA fermentation, respectively. RNG can be used as an alternative to fossil natural gas, while LA from waste feedstocks can displace conventional LA production pathways (mainly from corn via fermentation). Providing comprehensive life cycle GHG emissions of the combinations of waste feedstocks and products through different routes helps identify the GHG hotspots and show where emissions savings come from. The results show that the carbon intensities (CIs) of waste-derived RNG and LA are much lower than those of their counterparts. We estimated the life cycle GHG emissions for RNG to be between -146 and 27 g carbon dioxide equivalent (CO2e)/MJ, much lower than the CI of fossil fuels. Waste-derived LA pathways also show substantially lower CIs, ranging from -4.2 to -1.4 kgCO2e/kg LA, compared to the CIs of LA from corn and corn stover (1.2 and 0.3 kgCO2e/kg LA, respectively). We will also discuss that the low CIs of waste-derived products can come from low yields leading to high emission credits. Thus, life cycle analysis results presented per weight of treated waste can be used to support decisions about which waste feedstocks and products are to be used for sustainable waste valorization. In addition, we found that monetary emission reduction credits can play an important role in driving waste valorization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Porous Janus materials with unique asymmetries and functionality

Porous Janus materials have attracted widespread attention due to their asymmetry in wettability, charge, pore size or structure, thermal/electrical conductivity, and chemical activity, among other properties. Multifunction integration and unique directional manipulation of liquid, ions, or gas within porous Janus materials enable rapid progress in diverse applications such as water-oil separation, fog collection, personal moisture and healthcare management, energy conversion, desalination, sensor devices, and biomedical applications. Additionally, compared with conventional homogeneous materials, porous Janus materials not only showcase superior performance and energetic potential but also open up new applications by virtue of the synergistic or independent effects of asymmetry. This in-depth review systematically analyzes the research progress of porous Janus materials, highlighting fabrication strategies, synergistic/independent work mechanisms, and emerging advanced applications. Finally, ongoing challenges and outlook for the future research of porous Janus materials are presented.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Development of an optical sensor for measuring opacity changes in polyvinyl toluene scintillators

Polyvinyl toluene (PVT) based detectors are used in radiation portal monitors (RPMs) worldwide to detect the trafficking of illicit nuclear material. PVT scintillators, which are normally optically clear, have been observed to suffer internal fogging throughout their volume due to prolonged exposure to varying environmental conditions. These changes could lead to reduced performance for RPMs that utilize plastic scintillators. In this research, a proof of concept system, consisting of different color light emitting diodes (LEDs) and a single optical sensor (OS), were used to examine the change in light transmission through a PVT scintillator. This Optical Monitoring System (OMS), coupled with an environmentally exposed PVT detector, was tested in an environmental chamber where it was subjected to changes in temperature and humidity ranging from 55 °C at 100% relative humidity to –20 °C at 40% relative humidity. At temperatures below 10 °C, light transmission was reduced by 81% ± 8% for blue LEDs, 84% ± 5% for yellow LEDs, and 49% ± 4% for green LEDs. Similar reductions in detected light were not recorded when the OMS was tested with only air between the LEDs and OS. Therefore, the significant reductions in transmitted light were attributed to changes occurring within the PVT scintillator. These results indicate that a significant reduction in PVT opacity occurs due to wide environmental changes. A device such as the OMS could be used to track these changes and provide users an early indication that a portal monitor is suffering from reduced performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Additively manufactured multiplexed inertial coalescence filters

Multiphase flows often pose a significant challenge to the efficient and reliable design of thermofluidic systems. This paper describes multiplexed inertial coalescence filters composed of parallel helical pathways, designed to capture fine droplets (<40 µm) through inertial separation while maintaining a low pressure drop (<400 Pa). Filtration efficiencies for 7 µm and 30 µm droplets were characterized for varying flow conditions, with complete capture observed above a threshold flow rate. Models for filtration efficiency and pressure drop were developed and validated against experimental results to allow system design and optimization, enabled by the tunable additive manufacturing approach used to fabricate the filters. Filter quality factor was computed for varying droplet sizes, showcasing exceptional quality factor when compared to state-of-the-art filters documented in the literature. In conclusion, this multiplexed inertial coalescence filtration approach could find use in dehumidification systems, fog harvesting, chemical reactors, and microgravity droplet capture.

3D Printing↗
DOE OSTI2022

Analytical advances to study the air – water interfacial chemistry in the atmosphere

Formation of aqueous secondary organic aerosol (aqSOA) at the air – liquid interface recently has attracted a lot of attention in atmospheric chemistry. The discrepancies in mass distributions, aerosol oxidative capacity, liquid water content, hygroscopic growth of aerosols, and formation of clouds and fogs suggest that interfacial chemistry play a more important role than previously deemed. However, detailed mechanisms at the air–water interface remain unclear owing to the lack of comprehensive understanding that underpins complicated interfacial phenomena, which are not easily measurable from field campaigns, laboratory measurements, or computational simulations. Here, this review highlights relevant and recent technical advancement employed to study aqSOA encompassing spectroscopy and mass spectrometry. The current knowledge on the aqSOA processes is digested with an emphasis on recent research of interfacial aqSOA formation including laboratory studies and model simulations. Finally, future directions of the interfacial chemistry are recommended for field and laboratory studies as well as theoretical efforts to resolve interfacial challenges in atmospheric chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Corrosion Resistance of Lignin-Based Thermoplastic Adhesive-Bonded Aluminum Joints

Adhesive-bonded joints are essential for lightweight, multimaterial automotive structures. We developed a lignin-based thermoplastic adhesive with adhesion strength comparable to conventional epoxy adhesives (20–23 MPa), while offering exceptional durability, recyclability, and corrosion resistance. Unlike commercial epoxy adhesives requiring refrigerated storage, our adhesive retains its bonding potential after a year of ambient conditioning. Bonded joints can be repeatedly disassembled and rejoined with less than 2% strength loss. After 500 h of salt fog exposure, the adhesive-bonded aluminum joints exhibited a 24% strength reduction, compared to 61% reduction in strength of joints based on a commercial epoxy adhesive.

Yu, Zeyang [ORNL] (ORCID:0000000209002374)↗
DOE OSTI2021

Blowing Snow at McMurdo Station, Antarctica During the AWARE Field Campaign: Surface and Ceilometer Observations

Blowing snow (BLSN) is an impactful process in cold climates, affecting regional thermodynamics, radiation properties, and the surface mass balance of snow. Though it has significant climatic impacts, the process is still poorly understood and not widely included in weather and climate models. In 2016, the AWARE Field Campaign saw the deployment of a large suite of in situ and remote sensing instruments to McMurdo Station, Antarctica allowing for investigation of BLSN. A ceilometer–based BLSN detection algorithm used elsewhere in Antarctica is applied to data from AWARE, yielding a BLSN frequency of 14.1% compared to 8.2% as detected by human observers. To increase confidence in detections, the algorithm is updated to have shorter temporal averaging and to include a variety of meteorological thresholds to limit false detections due to fog. Efforts to incorporate a laser disdrometer into the algorithm were unsuccessful. An unphysical dependence of particle size distributions on wind speed is found suggesting observations are problematic at wind speeds greater than 10 m s –1 . The revised algorithm detected a BLSN frequency of 7.4%, increasing agreement with human observations and confidence that the process is actively occurring at the observation site. Furthermore, these observations are put into context of a climatology of human observations of BLSN at McMurdo station from 2002–2018. An annual average of 8.0%–14.0% is estimated, with a total annual range of 3.4%–21.3%. Regardless of whether BLSN is observed by humans or instrument, the majority of cases at this location are associated with ongoing precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Scaling of Turbulence and Microphysics in a Convection–Cloud Chamber of Varying Height

Abstract The convection–cloud chamber enables measurement of aerosol and cloud microphysics, as well as their interactions, within a turbulent environment under steady‐state conditions. Increasing the size of a convection–cloud chamber, while holding the imposed temperature difference constant, leads to increased Rayleigh, Reynolds and Nusselt numbers. Large–eddy simulation coupled with a bin microphysics model allows the influence of increased velocity, time, and spatial scales on cloud microphysical properties to be explored. Simulations of a convection–cloud chamber, with fixed aspect ratio and increasing heights of H = 1, 2, 4, and (for dry conditions only) 8 m are performed. The key findings are: Velocity fluctuations scale as H 1/3 , consistent with the Deardorff expression for convective velocity, and implying that the turbulence correlation time scales as H 2/3 . Temperature and other scalar fluctuations scale as H −3/7 . Droplet size distributions from chambers of different sizes can be matched by adjusting the total aerosol injection rate as the horizontal cross‐sectional area (i.e., as H 2 for constant aspect ratio). Injection of aerosols at a point versus distributed throughout the volume makes no difference for polluted conditions, but can lead to cloud droplet size distribution broadening in clean conditions. Cloud droplet growth by collision and coalescence leads to a broader right tail of the distribution compared to condensation growth alone, and this tail increases in magnitude and extent monotonically as the increase of chamber height. These results also have implications for scaling within turbulent, cloudy mixed‐layers in the atmosphere, such as fog layers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Large Aerosol Particles Favor Haze Conditions Through Limitations on Water Budget and Activation Kinetics

Experiments in the Pi Convection‐Cloud Chamber conducted by systematically changing the diameter of injected dry aerosol particles while holding the temperature difference constant demonstrate that dry diameter strongly influences the onset of haze‐dominated conditions. Two factors contribute: the system becomes water‐limited, resulting in reduction of supersaturation by growing aerosol particles to the activation diameter; and the activation process becomes kinetically limited. Dry aerosol diameter exerts a strong influence on activation time, with a power‐law exponent of 9/2. Kinetically limited activation occurs when the ratio of the activation and droplet residence times is greater than unity. The findings demonstrate that a haze‐dominated state, where cloud formation is suppressed, can be achieved not only with weak supersaturation forcing and high aerosol concentration but also with large, hygroscopic aerosol particles. These results have implications for cloud formation in polluted environments, fog development near the ocean, and hygroscopic cloud seeding.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating E3SM Global Storm‐Resolving Model Simulations of Deep Convection: Insights From DP‐SCREAM During TRACER

Global Storm-Resolving Models (GSRMs) are becoming increasingly vital for advancing climate modeling and improving the prediction of extreme weather events. Houston, a coastal region frequently affected by deep convective storms, offers an ideal setting to evaluate the ability of GSRMs to simulate deep convection. This study assesses the performance of the Doubly Periodic Simple Cloud-Resolving E3SM (Energy Exascale Earth System Model) Atmosphere Model (DP-SCREAM) using observations from the TRacking Aerosol Convection interactions ExpeRiment (TRACER) campaign. DP-SCREAM effectively reproduces the diurnal cycles of clouds and precipitation, demonstrating much greater skill than the E3SM single column model. The DP-SCREAM is demonstrated to be applicable to coastal regions, partially due to the forcing data sets already capturing the influence of breezes. DP-SCREAM also replicates biases persistent in the global version of SCREAM: the underrepresentation of boundary layer shallow clouds, a lack of mid-level congestus clouds, and the popcorn convection, characterized by small and disorganized convective cells generating the strongest precipitation. To investigate these issues, two sensitivity experiments were conducted: increasing the mixing length and scaling up the buoyancy flux within the Simplified Higher Order Closure scheme. Increasing the mixing length improved mid-level congestus representation and reduced unrealistic early morning fog occurrence. Enhancing buoyancy flux only marginally improved the bias of underproduced big convective cells. In conclusion, an additional resolution sensitivity test at 0.5 km grid spacing demonstrated that a refined horizontal resolution alone is insufficient to resolve these biases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

DarkSide-20k sensitivity to light dark matter particles

The dual-phase liquid argon time projection chamber is presently one of the leading technologies to search for dark matter particles with masses below 10 GeV c$^{−2}$. This was demonstrated by the DarkSide-50 experiment with approximately 50 kg of low-radioactivity liquid argon as target material. The next generation experiment DarkSide-20k, currently under construction, will use 1,000 times more argon and is expected to start operation in 2027. Based on the DarkSide-50 experience, here we assess the DarkSide-20k sensitivity to models predicting light dark matter particles, including Weakly Interacting Massive Particles (WIMPs) and sub-GeV c$^{−2}$ particles interacting with electrons in argon atoms. With one year of data, a sensitivity improvement to dark matter interaction cross-sections by at least one order of magnitude with respect to DarkSide-50 is expected for all these models. A sensitivity to WIMP–nucleon interaction cross-sections below 1 × 10$^{−42}$ cm$^{2}$ is achievable for WIMP masses above 800 MeV c$^{−2}$. With 10 years exposure, the neutrino fog can be reached for WIMP masses around 5 GeV c$^{−2}$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Structural regulation-induced Li-electron disentanglement for stabilized oxygen redox of Li-excess disordered rock-salt cathode materials

Since the discovery of its electrochemical activity, Li-excess disordered rock-salt (DRX) cathode material has received worldwide attention as it sets up a new way to exploit oxygen redox beyond the conventional layered structure with late-3d transition metals. However, the intricate structure-function relationship in the disordered lattice of the DRX material fogs the researcher's lens on the underlying redox mechanisms. Here, in this study, we employ a synergistic approach combining neutron total scattering with reverse Monte Carlo modeling and density functional theory calculations to unravel the landscape of oxygen redox reactions in DRX. Redox activities are evaluated in diverse oxygen clusters (OLi x TM 6-x ) and the spatial distribution of these clusters in the model DRX structure (Li 1.16 Ti 0.37 Ni 0.37 Nb 0.1 O 2 and Li 1.2 Ti 0.35 Ni 0.35 Nb 0.1 O 1.8 F 0.2 ) is explicitly determined. The results unveil that by regulating the short-range ordering between cations, fluorine atoms can effectively decouple the location of Li extraction and electron depletion. Such disentanglement between the Li reservoir and electron reservoir in the DRX lattice could play a pivotal role in protecting the oxidized oxygen and preserving the lattice framework during cycling. Through a tentatively designed non-fluorinated DRX oxide realizing similar Li-electron decoupling, an obvious enhancement of the cycling capability can be achieved without compromising the capacity release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Neutrinoless double beta decay sensitivity of the XLZD rare event observatory

The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60–80 t capable of probing the remaining weakly interacting massive particle-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials, such an experiment will also be able to competitively search for neutrinoless double beta decay in 136 Xe using a natural-abundance xenon target. XLZD can reach a 3σ discovery potential half-life of 5.7 × 10 27 years (and a 90% CL exclusion of 1.3 × 10 28 years) with 10 years of data taking, corresponding to a Majorana mass range of 7.3–31.3 meV (4.8–20.5 meV). XLZD will thus exclude the inverted neutrino mass ordering parameter space and will start to probe the normal ordering region for most of the nuclear matrix elements commonly considered by the community.

2-phase xenon TPCs↗