Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fires”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Realization of a wide steering end-fire facet optical phased array using silicon rich silicon nitride

The design, fabrication, and characterization of a 16-element optical phased array (OPA) using a high index (n = 3.1) silicon-rich silicon nitride (SRN) is demonstrated. Here, we present one-dimensional beam steering with end-fire facet antennas over a wide steering range of >115° at a fixed wavelength of 1525 nm. A beam width of 6.3° has been measured at boresight, consistent with theory. We demonstrate SRN as a viable material choice for chip-scale OPA applications due to its high thermo-optic coefficient, high optical power handling capacity [negligible two-photon absorption (TPA)], wide transparency window, and CMOS compatibility.

Nejadriahi, Hani↗
NASA NTRS1977

Hydrocarbon concentrations in fire toxicity tests as an indication of flash fire propensity

The concentrations of hydrocarbons in the gases from fire toxicity tests are often determined to obtain an indication of their contribution to toxic effects and of the mechanisms of thermal decomposition. Because the gas compositions produced in the University of San Francisco/NASA toxicity screening test are generated under identical pyrolysis conditions, they offer the potential of comparing the flash-fire propensity of various materials.

Hilado, C. J.↗
NASA NTRS1978

Development of aircraft lavatory compartments with improved fire resistance characteristics, phase 1: Fire containment test of a wide body aircraft lavatory module

A test was conducted to evaluate the fire containment characteristics of a Boeing 747 lavatory module. Results showed that the fire was contained within the lavatory during the 30-minute test period with the door closed. The resistance of the lavatory wall and ceiling panels and general lavatory construction to burn-through under the test conditions was demonstrated.

Anderson, R. A.↗
NASA NTRS2002

The Development of Midlatitude Cirrus Models for MODIS Using FIRE-I, FIRE-II, and ARM In Situ Data

Detailed in situ data from cirrus clouds have been collected during dedicated field Campaigns, but the use of the size and habit distribution data has been lagging in the development of more realistic cirrus scattering models. In this study, the authors examine the use of in situ cirrus data collected during three field campaigns to develop more realistic midlatitude cirrus microphysical models. Data are used from the First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment (FIRE)-I (1986) and FIRE-II (1991) campaigns and from a recent Atmospheric Radiation Measurement (ARM) Program campaign held in March-April of 2000. The microphysical models are based on measured vertical distributions of both particle size and particle habit and are used to develop new scattering models for a suite of moderate-resolution imaging spectroradiometer (MODIS) bands spanning visible. near-infrared, and infrared wavelengths. The sensitivity of the resulting scattering properties to the underlying assumptions of the assumed particle size and habit distributions are examined. It is found that the near-infrared bands are sensitive not only to the discretization of the size distribution but also to the assumed habit distribution. In addition. the results indicate that the effective diameter calculated from a given size distribution tends to be sensitive to the number of size bins that are used to discretize the data and also to the ice-crystal habit distribution.

Nasiri, Shaima L.↗
NASA NTRS2022

Fire Island Water Resources: Assessing Sediment Dynamics and Turbidity Changes Along Fire Island National Seashore Using Satellite Data

Fire Island National Seashore has experienced damaging effects as a result of coastal erosion. Erosion has become an increasingly damaging problem that has led to the destruction of park and community infrastructure, contributed to rising groundwater tables, and posed a serious threat to a globally rare holly maritime forest. Beach nourishment project efforts have been made to mitigate damage, but dredging is expensive and can be thwarted by high rates of erosion. The NASA DEVELOP team partnered with the National Park Service and Fire Island National Seashore and used imagery from Landsat 5 Thematic Mapper (TM), Landsat 8 Operational Land Imager (OLI), and Sentinel-2 MultiSpectral Instrument (MSI) to analyze turbidity and sediment dynamics through surface reflectance data from 2000-2021. Imagery was atmospherically corrected using Atmospheric Correction for OLI Lite (ACOLITE) and visualized in SeaWiFS Data Analysis Systems (SeaDAS). Additionally, shoreline change was analyzed using high-resolution imagery from WorldView-2 acquired from Maxar for pre-Hurricane Sandy on July 25th, 2010 and post-Hurricane Sandy on December 18th, 2019. The results of this analysis showed that turbidity is highest in the winter seasons. The shoreline analysis estimated total shoreline loss of about 62 acres on the ocean side, and 11 acres on the bay side of the island. These results will be used to better inform future partner-designed shoreline management projects in the face of further erosion and sea level rise.

Kelly Young↗
NASA NTRS2023

Marin County Wildfires Ii: Improving Fire Suppression Modeling to Inform Fire Prevention and Suppression Decisions in Marin County, Ca

A future of increased wildfires requires greater integration of spatial analysis and local knowledge of emergency responders. We examine the application of a Potential Operational Delineations (PODs) framework for strategic pre-fire planning in Marin County. PODs are spatial units for wildfire management that combine predictive modeling and local firefighter expertise to identify potential control locations as unit boundaries and assess the difficulty of suppression within units. Additionally, this project explores the integration of road networks and social vulnerability to assess environmental justice in evacuation safety. This project constitutes a novel application of the PODs framework as it integrates expertise from Marin County senior firefighters with a Fireline Location Model (FLM) to achieve POD definition and uses a Suppression Difficulty Score (SDS) to rank each POD. The FLM uses network analysis and hydrologic modeling to identify key roads and ridgelines as boundaries and combines them with expert knowledge, in the form of workshops, to construct PODs. Once identified, PODs are classified using SDS, which includes processed inputs such as LiDAR-derived aboveground biomass, ECOSTRESS Evaporative Stress Index, land use cover type from Sentinel-2 Imagery, and a digital elevation model. Environmental justice for evacuation safety incorporated three key road metrics such as connectivity, travel area, and exit capacity, the Social Vulnerability Index from the Center for Disease Control, and cell coverage to determine a final Evacuation Difficulty Score. Results indicate a strong link between road networks as primary POD boundaries, with ridgelines and waterways as secondary and tertiary locations. Specifically, we find 78.5% of expertise-identified POD boundaries align with FLM-determined boundaries. More validation is needed to support this process; however, initial results signal a feasible framework to integrate expertise and spatial analysis in local level strategic fire planning

Wildfire modeling↗
DOE OSTI2022

Industry Level Feasibility of LiDAR Data into Fire Modeling Using Fire Risk Investigation in 3D (FRI3D)

Many evaluation, assessment, and modeling tasks at nuclear power plants require spatial information this often requires physical visits to locations within the facility because the 2D or 3D schematics and current models do not contain enough detail or do not capture as-built and real-world conditions. These visits require extensive manual labor for not only the requesting party, but support groups such as security. LIDAR mapping is trying to solve that problem by providing very detailed 3D models for low costs. However, the use of these models can be very limited because either component reference information is missing and too costly to add, or there is no way to extract specific spatial data needed for other tools. This report presents Idaho National Lab's work with Environmental Intellect (Ei) covering two main efforts. First, to reduce the effort of "tagging" data in large 3D models. By using both existing plant database information, and artificial intelligence (AI) to find and read equipment labels. This research explores the ability of to provide a simple way for the user to tag items and verify plant data, capturing both the speed of AI and human verification. The second part of the work is the development of an interface for importing pieces needed for Modeling & Simulation. Analysis work such as that for fire, flood, or physical security all require spatial or 3D models in various levels of detail. This interface will allow for the retrieval of item location or boundaries, enabling the auto generation of models for varying tools. The application program interface (API) of the fire risk investigation in 3D (FRI3D) was used to test feasibility of exporting the LiDAR tagged spatial information. Outcomes from this work provide preliminary data to determine if the tools and methods could provide substantial industry benefit if fully matured.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2018

Fire Analysis of the Thomas Fire in California Using NASA Data in a GIS

NASA's Earth Observing System Data Information System (EOSDIS) manages Earth Observation satellites and the Distributed Active Archive Centers (DAACs), where the data is stored and processed. This poster presents the use of satellite data from NASA's inventory that have the potential for use in identification and analysis of forest fire risk and subsequent after-effects within a geographic information system (GIS). The challenge is that Earth Observation data is complicated. There is plenty of data available, however, the science teams have had a "top-down" approach: define what it is you are trying to study -select a set of satellite(s) and sensor(s), and drill down for the data.

Worldview↗
DOE OSTI2021

A novel approach to mitigating the potential release of radioisotopes under fire conditions - enhancing fire resiliency of radiological contamination fixatives during deactivation & decommissioning activities

Savannah River National Laboratory (SRNL), in close collaboration with the Florida International University Applied Research Center (FIU ARC), successfully executed a technology development activity on behalf of the Department of Energy, Office of Environmental Management (DOE EM). The purpose of the activity was to improve the capability of fixative technologies in immobilizing residual contamination when exposed to thermal stressors as postulated in accident scenarios in Basis for Interim Operations (BIO) documents across the DOE EM complex. The effort resulted in the test and evaluation of a down-selected, commercial-off-the-shelf (COTS) intumescent technology in a radioactive environment at the Savannah River Site (SRS) Building 235-F Plutonium Fuel Form (PuFF) Facility and highlighted the potential use of this technology as a stand-alone, fire retardant fixative. Furthermore, this activity highlighted significant shortfalls in common fixatives currently used to support decommissioning activities and brought to the forefront the need for a methodical, uniformed approach to certifying fixative technologies for operational use in Deactivation and Decommissioning (D&D) activities. An essential component of this research was to evaluate the state of industry fixatives currently in use and set the foundation for comparison to alternative technological solutions. A baseline of five (5) commonly used fixatives and decontamination gels (hereafter collectively referred to as fixatives) was conducted, and notable shortfalls and deficiencies were revealed, particularly when exposed to thermal, water, and other environmental stressors. At temperatures as low as 300 °F - 400 °F (148.89 °C – 204.44 °C), all commonly used fixatives melted from the substrates within 3-5 minutes of exposure, resulting in contaminant transport. Significant degradation in terms of mass loss, desiccation, and off-gassing occurred, and the chemical breakdown of the polymer was so complete researchers assessed there would likely have been a release of residual contamination. Additional vulnerabilities became evident when exposed to water immersion and high humidity; existing fixatives took up water, swelling and frequently delaminating from the substrate, once again increasing the likelihood of a contaminant release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1968

Fire retardant foams developed to suppress fuel fires

Heat insulating polyurethane foam retards and suppresses fuel fires. Uniformly dispersed in the foam is a halogenated polymer capable of splitting off hydrogen halide upon heating and charring of the polyurethane.

Fish, R.↗
NASA NTRS1978

The effect of fire retardants on the fire response characteristics of cellulosic materials

The resistance to ignition of fire retardant-treated wood, cotton, and cellulose insulation was studied. The proprietary composition used to treat wood was found to increase resistance to ignition and to reduce smoke toxicity. Cotton treated with boric acid (added by padding on or by vapor phase process) was found to have increased resistance to ignition and decreased smoke toxicity. Boric acid increased the resistance of cellulose insulation to ignition but also slightly increased the smoke toxicity.

Hilado, C. J.↗
NASA NTRS1973

The Survey of Fires in Buildings. Third Report: The Use of Information Obtained From Fire Surveys

The previous two reports in this series gave details of the general. scope of the pilot exercise and methods by which it was carried out. In addition the nature of the information obtained was illustrated by preliminary analyses of the house and industrial fires surveyed. Some brief comments on the use of the information were made. This report indicates a method of assessing the nation wide effects of applying conclusions drawn from the results of limited numbers of surveys and considers the use of the information for specific purposes.

Silcock, A.↗