SEARCH · Engineering Papers

Results for “finite-volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Accurate solutions for transonic viscous flow over finite wings

An explicit multistage Runge-Kutta type time-stepping scheme is used for solving the three-dimensional, compressible, thin-layer Navier-Stokes equations. A finite-volume formulation is employed to facilitate treatment of complex grid topologies encountered in three-dimensional calculations. Convergence to steady state is expedited through usage of acceleration techniques. Further numerical efficiency is achieved through vectorization of the computer code. The accuracy of the overall scheme is evaluated by comparing the computed solutions with the experimental data for a finite wing under different test conditions in the transonic regime. A grid refinement study ir conducted to estimate the grid requirements for adequate resolution of salient features of such flows.

Vatsa, V. N.↗

NASA NTRS1986

Influence of numerical dissipation in computing supersonic vortex-dominated flows

Steady supersonic vortex-dominated flows are solved using the unsteady Euler equations for conical and three-dimensional flows around sharp- and round-edged delta wings. The computational method is a finite-volume scheme which uses a four-stage Runge-Kutta time stepping with explicit second- and fourth-order dissipation terms. The grid is generated by a modified Joukowski transformation. The steady flow solution is obtained through time-stepping with initial conditions corresponding to the freestream conditions, and the bow shock is captured as a part of the solution. The scheme is applied to flat-plate and elliptic-section wings with a leading edge sweep of 70 deg at an angle of attack of 10 deg and a freestream Mach number of 2.0. Three grid sizes of 29 x 39, 65 x 65 and 100 x 100 have been used. The results for sharp-edged wings show that they are consistent with all grid sizes and variation of the artificial viscosity coefficients. The results for round-edged wings show that separated and attached flow solutions can be obtained by varying the artificial viscosity coefficients. They also show that the solutions are independent of the way time stepping is done. Local time-stepping and global minimum time-steeping produce same solutions.

Kandil, O. A.↗

NASA NTRS1985

High resolution solutions of the Euler equations for vortex flows

Solutions of the Euler equations are presented for M = 1.5 flow past a 70-degree-swept delta wing. At an angle of attack of 10 degrees, strong leading-edge vortices are produced. Two computational approaches are taken, based upon fully three-dimensional and conical flow theory. Both methods utilize a finite-volume discretization solved by a pseudounsteady multistage scheme. Results from the two approaches are in good agreement. Computations have been done on a 16-million-word CYBER 205 using 196 x 56 x 96 and 128 x 128 cells for the two methods. A sizable data base is generated, and some of the practical aspects of manipulating it are mentioned. The results reveal many interesting physical features of the compressible vortical flow field and also suggest new areas needing research.

Murman, E. M.↗

NASA NTRS1987

Comparison of three explicit multigrid methods for the Euler and Navier-Stokes equations

Three explicit multigrid methods, Ni's method, Jameson's finite-volume method, and a finite-difference method based on Brandt's work, are described and compared for two model problems. All three methods use an explicit multistage Runge-Kutta scheme on the fine grid, and this scheme is also described. Convergence histories for inviscid flow over a bump in a channel for the fine-grid scheme alone show that convergence rate is proportional to Courant number and that implicit residual smoothing can significantly accelerate the scheme. Ni's method was slightly slower than the implicitly-smoothed scheme alone. Brandt's and Jameson's methods are shown to be equivalent in form but differ in their node versus cell-centered implementations. They are about 8.5 times faster than Ni's method in terms of CPU time. Results for an oblique shock/boundary layer interaction problem verify the accuracy of the finite-difference code. All methods slowed considerably on the stretched viscous grid but Brandt's method was still 2.1 times faster than Ni's method.

Chima, Rodrick V.↗

NASA NTRS1986

Generation of a composite grid for turbine flows and consideration of a numerical scheme

A composite grid was generated for flows in turbines. It consisted of the C-grid (or O-grid) in the immediate vicinity of the blade and the H-grid in the middle of the blade passage between the C-grids and in the upstream region. This new composite grid provides better smoothness, resolution, and orthogonality than any single grid for a typical turbine blade with a large camber and rounded leading and trailing edges. The C-H (or O-H) composite grid has an unusual grid point that is connected to more than four neighboring nodes in two dimensions (more than six neighboring nodes in three dimensions). A finite-volume lower-upper (LU) implicit scheme to be used on this grid poses no problem and requires no special treatment because each interior cell of this composite grid has only four neighboring cells in two dimensions (six cells in three dimensions). The LU implicit scheme was demonstrated to be efficient and robust for external flows in a broad flow regime and can be easily applied to internal flows and extended from two to three dimensions.

Choo, Y.↗

NASA NTRS1986

Development of an explicit time marching procedure for laminar and turbulent flow

A finite-volume based, time-marching method for turbulent and laminar flows is described. Extensions to the computational procedure to allow the handling of shock induced separation and large regions of strong backflow are emphasized. Two test cases are considered, the United Technologies Research Center (UTRC) separated and reattached turbulent boundary layer and the strong shock case in the McDonnell Douglas Research Lab (MDRL) transonic diffuser G. The extended method worked well on the UTRC flow with a boundary layer blockage of 58% and a maximum backflow velocity of 37% of the local maximum free-stream velocity. It also worked well on the MDRL diffuser with a shock Mach number of 1.353 and a maximum backflow velocity of -71.7 m/s. A Mach number dependent interpolation formula for effective pressure was developed for use in density-update time-marching methods.

Source record↗

NASA NTRS1987

Computational and experimental investigation of cavity flowfields

This paper presents a computational and experimental investigation of supersonic flow past a cavity in a flat plate. The source of the particular interest in this problem is the ongoing study of the aerodynamic interference effects between a separating store and its bay in the parent body. An upwind relaxation scheme, utilizing flux vector splitting and line-Gauss-Seidel iterations, is used to solve Reynolds-averaged Navier-Stokes equations. Spatial discretizations of this two-dimensional analysis are based on implicit and finite-volume methods. Turbulence is modeled and shocks are captured. The flowfield of the symmetry plane at the half-width is computationally visualized and all flow properties are computed. Experimental tests are conducted in the Langley Unitary Plan Wind Tunnel to measure wall pressures and to capture schlieren photographs. Qualitative as well as quantitative data of computations and experiments agree very well. These two vehicles of investigation are merged to show open, closed and transitional cavity flow behaviors.

Baysal, O.↗

NASA NTRS1987

Navier-Stokes computations of vortical flows over low aspect ratio wings

An upwind-biased finite-volume algorithm is applied to the low-speed flow over a low aspect ratio delta wing from zero to forty degrees angle of attack. The differencing is second-order accurate spatially, and a multigrid algorithm is used to promote convergence to the steady state. The results compare well with the detailed experiments of Hummel (1983) and others for a Re(L) of 0.95 x 10 to the 6th. The predicted maximum lift coefficient of 1.10 at thirty-five degrees angle of attack agrees closely with the measured maximum lift of 1.06 at thirty-three degrees. At forty degrees angle of attack, a bubble type of vortex breakdown is evident in the computations, extending from 0.6 of the root chord to just downstream of the trailing edge.

Thomas, J. L.↗

NASA NTRS1987

An L-U implicit multigrid algorithm for the three-dimensional Euler equations

An LU implicit multigrid scheme is developed for the calculation of three-dimensional transonic flow through rotating cascades. This numerical method solves the unsteady Euler equations of gas dynamics in a finite-volume form. The implicit scheme makes it possible to take a much larger time step than is normally permitted in most explicit schemes, while the multigrid method is incorporated to accelerate the convergence rate for steady state calculations. Using this method, computational storage requirements are comparable to those of explicit schemes, while operation counts are considerably less than those found in the more widely-used ADI schemes.

Yokota, Jeffrey W.↗

NASA NTRS1987

Computation of steady and unsteady vortex dominated flows

The unsteady Euler equations have been written in the conservation form for the relative motion in a rotating frame of reference. The resulting equations are solved by using a central-difference finite-volume scheme with four-stage Runge-Kutta time stepping. For steady flow problems, local time stepping is used and for unsteady flow problems, the minimum global time stepping is used. A three-dimensional fully vectorized computer program has been developed and applied to steady and unsteady maneuvering delta wing. The capability of the three-dimensional program has been demonstrated for a rigid sharp-edged delta wing undergoing uniform rolling in a conical flow and rolling oscillations in a locally conical flow.

Kandil, Osama A.↗

NASA NTRS1987

Viscous calculations of supersonic flows past cylinders at angles of attack

Two- and three-dimensional separated flows around cylindrical sections and a body-of-revolution at angles of attack from -10 deg to +20 deg are computed. The blunt-nose-cylinders chosen for the analyses have different configurations, and one of them has a boat-tail. The freestream Mach numbers are 1.5 and 1.6, the unit Reynolds number and the total temperature are 2 million/ft, and 585 R, respectively. Among the possible areas of application for this study are the aerodynamics of separating stores and missiles. The Reynolds-averaged Navier-Stokes equations are solved by an approximately-factored, implicit, upwind-biased, finite-volume algorithm. The convergence to steady state was accelerated using a multigrid strategy. The results helped understanding the structure of the flowfield with varying incidence and configuration, and the suitability of the computational algorithm used for this class of flows. A two-layer algebraic eddy viscosity model is used for the two-dimensional turbulent flows. Laminar three-dimensional calculations are benchmarked through comparisons with wind tunnel test results.

Baysal, O.↗

NASA NTRS1986

Upwind relaxation algorithms for Euler/Navier-Stokes equations

A description of and results from a solution algorithm for the compressible Navier-Stokes equations are presented. The main features of the algorithm are second or third order accurate upwind discretization of the convection and pressure derivatives and a relaxation scheme for the unfactored implicit backward Euler time method, implemented in a finite-volume formulation. Upwind methods were successfully used to obtain solutions to the Euler equations for flows with strong shock waves. The particular upwind method being used is based on the flux vector splitting technique developed by Van Leer and both second and third order accurate discretizations were developed. Currently, the most widely used implicit solution technique for the Navier-Stokes equations use approximate factorization (AF) methods to treat multidimensional problems. The time integration scheme being used in the present algorithm corresponds to a line Gauss-Seidel relaxation method. This method produces good convergence rates for steady-state flows, and most of the algorithm was vectorized on the NASA Langley VPS 32 computer. The Navier-Stokes algorithm was tested for several two-dimensional flow problems. Solutions for the problems gave excellent results. The presented effort is directed toward the extension of the scheme to the full three-dimensional Navier-Stokes equations.

Thomas, J. L.↗

NASA NTRS1986

A multistage time-stepping scheme for the thin-layer Navier-Stokes equations

A finite-volume scheme for numerical integration of the Euler equations was extended to allow solution of the thin-layer Navier-Stokes equations in two and three dimensions. The extended algorithm, which is based on a class of four-stage Runge-Kutta time-stepping schemes, was made numerically efficient through the following convergence acceleration technique: (1) local time stepping, (2) enthalpy damping, and (3) residual smoothing. Also, the high degree of vectorization possible with the algorithm has yielded an efficient program for vector processors. The scheme was evaluated by solving laminar and turbulent flows. Numerical results have compared well with either theoretical or other numerical solutions and/or experimental data.

Swanson, R. C., Jr.↗

NASA NTRS1987

Supercomputing of supersonic flows using upwind relaxation and MacCormack schemes

The performance of two numerical solution schemes, (1) an implicit upwind relaxation with a finite-volume discretization (Thomas and Walters, 1985) and (2) an explicit-implicit MacCormack (1981) scheme with a finite-difference discretization, is compared in two-dimensional simulations of supersonic flow past a flat plate with leading edge, a rearward-facing step, a 10-deg compression corner, a NACA 0012 airfoil at high angle of attack, and a cavity. The algebraic turbulence model, the solution methods, and the boundary conditions and SIMD coding are explained, and the results are presented in tables and graphs and characterized with reference to published experimental data. Scheme (1) is found to converge more rapidly and to give more accurate results than (2) in a wide range of problem types.

Baysal, O.↗

NASA NTRS1987

Prospects for Eulerian CFD analysis of helicopter vortex flows

The applicability of current finite-volume CFD algorithms based on the Euler equations to the vortex flow over a helicopter in forward flight is investigated analytically. The general characteristics of the flow are reviewed; existing Euler, Navier-Stokes, perturbation, high-order, and adaptive methods are briefly characterized; and a novel Eulerian/Lagrangian approach with entropy and vorticity corrections is presented in detail. Numerical results for simple convection of a finite-core Lamb vortex moving downstream with its axis perpendicular to the flow are presented in graphs, and the possibility of extending the method to three-dimensional, viscous, and shock flows is discussed.

Drela, Mark↗

NASA NTRSDate not supplied

Aerothermal Shape Optimization of Actively-Cooled Battery Packs using Conjugate Heat Transfer

Thermal management for battery is important for electric aircraft because battery temperature is critically important to vehicle safety, and it also has direct impact on the efficiency of the battery system. Because ambient air is a readily available resource for aircraft, this paper considers an active cooling concept with forced convection of ambient air through the battery pack. Conjugate heat transfer analysis is used to solve the coupled aero-thermal problem, which consists of a finite-volume computational fluid dynamics solver for the fluid domain, and a conduction heat transfer solver for the solid domain. A mixed Neumann and Dirichlet boundary condition is developed for the fluid-solid interface, which allows the solid domain to completely submerge in the fluid domain. A gradient-based optimization method is adopted, and the discrete adjoint approach implemented in DAFoam is used to efficiently compute the gradients. The aero-thermal coupling for primal analysis and gradient computation is handled using the OpenMDAO-based MPhys framework. A constant heat source is prescribed for the battery cells, and the battery shape (design variable) is optimized to minimize cooling pump power and battery weight (composite objective function) while keeping the battery temperature below a threshold (constraint). The optimized design achieves a 44.6% and 1.5% reduction in the cooling pump power and battery weight, respectively, and the maximal temperature constraint is satisfied. This work has the potential to reduce battery-pack weight, improve performance, and reduce the weight of thermal management systems for electric vertical take-off and landing aircraft.

thermal management↗

NASA NTRS2026

A Modular Conjugate Heat Transfer Optimization Framework for Thermal Management of Electric Aircraft

Conjugate heat transfer (CHT) analysis and optimization is a powerful method for improving thermal management, as it simultaneously resolves the temperature distribution in both fluid and solid domains. This paper presents a modular, discrete adjoint-based CHT optimization capability integrated within the OpenMDAO/MPhys framework. A unique feature of the proposed framework is its flexibility to extend to multidisciplinary optimization, including aero-structural-thermal applications. The fluid domain is modeled using a finite-volume Computational Fluid Dynamics (CFD) solver, and the solid domain with a conduction heat transfer solver. A mixed Neumann-Dirichlet boundary condition is developed to enable full submersion of the solid geometry within the fluid domain, while ensuring consistent temperature and heat flux coupling at the CHT interface. Gradient-based optimization is performed; the gradients are efficiently computed using the discrete adjoint solvers implemented in DAFoam. To demonstrate the method, this paper considers two cases related to electric aircraft thermal management: a U-bend heat exchanger and an actively cooled battery pack. The U-bend case aims to minimize pressure loss while maximizing heat flux by changing the pipe geometry. The optimized design reduces pressure loss by 52.7% and increases total heat flux by 2.3%. In the battery pack case, a 3-by-3 cell configuration is cooled by ambient airflow, with constant heat generation prescribed in the cells. The battery casing shape serves as the design variable, and the objective function is a weighted sum of pressure loss and pack weight, subject to a maximum temperature constraint. The optimized design achieves a 44.6% reduction in pressure loss and a 1.5% reduction in weight, while satisfying the thermal constraint. To ensure the reliability of the optimized designs, this study validates coarse-mesh, steady-state predictions against fine-mesh unsteady simulations, demonstrating consistency within acceptable errors. This work demonstrates the potential of the developed framework to enable rapid, high-fidelity design of thermal management systems for electric aircraft.

heat transfer↗

DOE OSTI2025

SCM overview & the EBR-II shutdown heat removal tests validation.

Pronghorn is an engineering-scale, coarse-mesh, thermal-hydraulics tool for supporting reactor-core simulations of advanced nuclear reactors. Most of the current efforts in Pronghorn have been devoted in developing porous finite-volume capabilities and adapting closure correlations for coarse-mesh thermal-hydraulics modeling. However, for liquid-metal reactors (LMRs) with wire-wrapped fuel pin assemblies, a pin-level thermal-hydraulic resolution is required for most safety case studies (pin rupture, channel blockage, etc.). For this purpose, a new Subchannel application is developed in MOOSE, which affords the required flow field resolution, while still preserving an engineering-scale approach. This new solver can be natively coupled to Pronghorn and other MOOSE objects to enable full-core, multi-physics, multi-scale engineering studies. This presentation presents the main features of the SCM code and demonstrates a validation case based on the EBR-II SHRT tests.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗