SEARCH · Engineering Papers

Results for “fast solver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Fast algorithm for calculating chemical kinetics in turbulent reacting flow

This paper addresses the need for a fast batch chemistry solver to perform the kinetics part of a split operator formulation of turbulent reacting flows, with special attention focused on the solution of the ordinary differential equations governing a homogeneous gas-phase chemical reaction. For this purpose, a two-part predictor-corrector algorithm which incorporates an exponentially fitted trapezoidal method was developed. The algorithm performs filtering of ill-posed initial conditions, automatic step-size selection, and automatic selection of Jacobi-Newton or Newton-Raphson iteration for convergence to achieve maximum computational efficiency while observing a prescribed error tolerance. The new algorithm, termed CREK1D (combustion reaction kinetics, one-dimensional), compared favorably with the code LSODE when tested on two representative problems drawn from combustion kinetics, and is faster than LSODE.

Radhakrishnan, K.↗

NASA NTRS1992

On the use of a three-dimensional Navier-Stokes solver for rocket engine pump impeller design

A 3D Reynolds-averaged Navier-Stokes Solver and a Fast Grid Generator (FGG), developed specially for centrifugal impeller design, were incorporated into the pump impeller design process. The impeller performance from the CFD analysis was compared to one-dimensional prediction. Both analyses showed good agreement of the impeller hydraulic efficiency, 94.5 percent, but with an 8 percent discrepancy of Euler head prediction. The impeller blade angle, discharge hub to shroud width, axial length and blade stacking were systematically changed to achieve an optimum impeller design. Impeller overall efficiency, loss distribution, hub-to-tip flow angle distortion and blade-to-blade flow angle change are among those criteria used to evaluate impeller performance. Two grid sizes, one with 10 K grid points and one with 80 K grid points were used to evaluate grid dependency issues. The effects of grid resolution on the accuracy and turnaround time are discussed. In conclusion, it is demonstrated that CFD can be effectively used for design and optimization of rocket engine pump components.

Chen, Wei-Chung↗

NASA NTRS1975

Advances in Application of Fast Semidirect Computational Methods in Transonic Flow

This paper is intended as a review and summary of the advances made in a recently developed approach for rapid numerical solution of the equations of inviscid transonic aerodynamics. The investigation has been limited to two-dimensional, steady, inviscid flow over airfoils in a subsonic free stream, with emphasis on development of a rapid computational technique, rather than on generality of application. The approach uses finite-difference algorithms called "fast direct elliptic solvers" within an iteration scheme. "Direct" means that the entire computation field is solved at once, rather than in successive traverses over the field as in a point- or line-relaxation method. Such an iterative method is referred to as "semidirect." The iterative convergence can be faster than in other relaxation methods because changes are felt simultaneously at all points in each succeeding iteration. Direct elliptic solvers and semidirect methods have restrictions, but these are gradually being removed. Direct solvers were first developed for solving Poisson's equation on a rectangle without interior boundaries. A method to treat first-order systems, a direct Cauchy-Riemann solver has also been developed. Numerical treatment of part of a system of nonlinear equations by a Poisson solver has been reported. Also Poisson solvers in semidirect methods were used for nonseparable elliptic equations. The semidirect method was extended to the solution of a problem of mixed type, where the improved Murman-Cole transonic small-disturbance difference equations were solved. A slightly supercritical flow over a biconvex airfoil was treated successfully, but the iterations did not converge for more strongly supercritical conditions In another work the addition of terms ot both sides of the difference equations stabilized the iteration for supercritical conditions with large supersonic zones. For this, the Cauchy-Riemann solver was revised to incl,ude the needed terms. Most recently, the evaluation of parameters for rapid convergence and comparisons, with Murman's line-relaxation method was described. The method was extended to full second order accuracy in a fully conservative formulation in another work.

Martin, E. Dale↗

NASA NTRS2011

Efficient Kriging Algorithms

More efficient versions of an interpolation method, called kriging, have been introduced in order to reduce its traditionally high computational cost. Written in C++, these approaches were tested on both synthetic and real data. Kriging is a best unbiased linear estimator and suitable for interpolation of scattered data points. Kriging has long been used in the geostatistic and mining communities, but is now being researched for use in the image fusion of remotely sensed data. This allows a combination of data from various locations to be used to fill in any missing data from any single location. To arrive at the faster algorithms, sparse SYMMLQ iterative solver, covariance tapering, Fast Multipole Methods (FMM), and nearest neighbor searching techniques were used. These implementations were used when the coefficient matrix in the linear system is symmetric, but not necessarily positive-definite.

Memarsadeghi, Nargess↗

NASA NTRSDate not supplied

Enabling Interoperability in Earth System Digital Twins (ESDT): Integrating Observations, Models, and AI for Actionable Insights Through NASA'S Intelligent Systems Technology Program

NASA’s Intelligent Systems Technology Program (IST) is driving a paradigm shift in Earth science through the development of Earth System Digital Twins (ESDT). These integrated information systems create a dynamic "digital replica" of the Earth by harmonizing continuous, multi-source observations with high-fidelity models and state-of-the-art artificial intelligence (AI) that enable “What now?”, “What next?”, and “What if?” scenario building. These scenarios are reflected in NASA IST’s series of ESDTs, from the Coastal Zone Digital Twin that integrates complex data on the current state of the Chesapeake Bay to the Terrestrial Environmental Rapid-Replication and Assimilation Hydrometeorological (TerraHydro) AI-based ESDT that forecasts water movement across Earth’s surface, to the Agriculture Land Information System (AgLIS) which can be used to assess optimal planting dates and crop yield estimates. By bridging the gap between vast data archives and actionable insights, these projects enable a system-of-systems approach to understanding complex, interacting Earth processes. This poster will highlight recent innovations and future directions from NASA’s ESDT initiatives: Continuous Data Assimilation & Multi-Source Fusion. A core requirement of the ESDT work is the transition from static models to dynamic "living" replicas. This involves creating frameworks for the continual assimilation of near-real-time data from uncoordinated, heterogeneous sources, including satellite observations and airborne assets, and ground-based Internet of Things (IoT) sensors. These systems link design, operational status, and environmental data, ensuring the digital twin accurately reflects the current state of the physical Earth system. High-Fidelity Hybrid Modeling & Computational Acceleration to enable interactive "what-if" explorations, programs are moving beyond traditional, slow physical solvers by developing fast surrogate machine learning models and Deep Generative Models (DGMs). These hybrid approaches use neural networks to emulate complex physics, such as cloud feedback or ocean dynamics, at a fraction of the original computing cost, often leveraging advanced hardware like Graphics Processing Units (GPUs) to achieve the necessary scale. Federated Ecosystems & Interoperable Frameworks rather than building isolated tools, NASA IST is moving toward federated ESDTs and reusable analytic collaborative frameworks. This theme focuses on interoperability standards and common ontologies that allow specialized digital twins to interact and share data. This system-of-systems architecture supports multi-discipline investigations, such as analyzing how upstream watershed changes impact downstream urban flooding or how wildfire emissions affect regional air quality. By leveraging these advancements, ESDTs empower researchers and decision-makers to conduct real-time analysis and run complex hypothetical scenarios, ultimately improving our understanding of Earth’s evolving systems and informing critical real-world applications.

Earth System↗

NASA NTRS2003

Fast-Running Aeroelastic Code Based on Unsteady Linearized Aerodynamic Solver Developed

The NASA Glenn Research Center has been developing aeroelastic analyses for turbomachines for use by NASA and industry. An aeroelastic analysis consists of a structural dynamic model, an unsteady aerodynamic model, and a procedure to couple the two models. The structural models are well developed. Hence, most of the development for the aeroelastic analysis of turbomachines has involved adapting and using unsteady aerodynamic models. Two methods are used in developing unsteady aerodynamic analysis procedures for the flutter and forced response of turbomachines: (1) the time domain method and (2) the frequency domain method. Codes based on time domain methods require considerable computational time and, hence, cannot be used during the design process. Frequency domain methods eliminate the time dependence by assuming harmonic motion and, hence, require less computational time. Early frequency domain analyses methods neglected the important physics of steady loading on the analyses for simplicity. A fast-running unsteady aerodynamic code, LINFLUX, which includes steady loading and is based on the frequency domain method, has been modified for flutter and response calculations. LINFLUX, solves unsteady linearized Euler equations for calculating the unsteady aerodynamic forces on the blades, starting from a steady nonlinear aerodynamic solution. First, we obtained a steady aerodynamic solution for a given flow condition using the nonlinear unsteady aerodynamic code TURBO. A blade vibration analysis was done to determine the frequencies and mode shapes of the vibrating blades, and an interface code was used to convert the steady aerodynamic solution to a form required by LINFLUX. A preprocessor was used to interpolate the mode shapes from the structural dynamic mesh onto the computational dynamics mesh. Then, we used LINFLUX to calculate the unsteady aerodynamic forces for a given mode, frequency, and phase angle. A postprocessor read these unsteady pressures and calculated the generalized aerodynamic forces, eigenvalues, and response amplitudes. The eigenvalues determine the flutter frequency and damping. As a test case, the flutter of a helical fan was calculated with LINFLUX and compared with calculations from TURBO-AE, a nonlinear time domain code, and from ASTROP2, a code based on linear unsteady aerodynamics.

Reddy, T. S. R.↗

NASA NTRS1997

Euler/Navier-Stokes Solvers Applied to Ducted Fan Configurations

Due to noise considerations, ultra high bypass ducted fans have become a more viable design. These ducted fans typically consist of a rotor stage containing a wide chord fan and a stator stage. One of the concerns for this design is the classical flutter that keeps occurring in various unducted fan blade designs. These flutter are catastrophic and are to be avoided in the flight envelope of the engine. Some numerical investigations by Williams, Cho and Dalton, have suggested that a duct around a propeller makes it more unstable. This needs to be further investigated. In order to design an engine to safely perform a set of desired tasks, accurate information of the stresses on the blade during the entire cycle of blade motion is required. This requirement in turn demands that accurate knowledge of steady and unsteady blade loading be available. Aerodynamic solvers based on unsteady three-dimensional analysis will provide accurate and fast solutions and are best suited for aeroelastic analysis. The Euler solvers capture significant physics of the flowfield and are reasonably fast. An aerodynamic solver Ref. based on Euler equations had been developed under a separate grant from NASA Lewis in the past. Under the current grant, this solver has been modified to calculate the aeroelastic characteristics of unducted and ducted rotors. Even though, the aeroelastic solver based on three-dimensional Euler equations is computationally efficient, it is still very expensive to investigate the effects of multiple stages on the aeroelastic characteristics. In order to investigate the effects of multiple stages, a two-dimensional multi stage aeroelastic solver was also developed under this task, in collaboration with Dr. T. S. R. Reddy of the University of Toledo. Both of these solvers were applied to several test cases and validated against experimental data, where available.

Keith, Theo G., Jr.↗

DOE OSTI2026

Enhancing photoionization rate calculations in low-temperature plasmas using spectral methods

Photoionization plays a central role in the development of streamer discharges and other non-equilibrium plasma phenomena. It creates seed electrons, which are essential for positive streamer propagation, allowing the ionization front to move forward. Because of this, accurate modeling of photoionization is very important for predicting streamer behavior and plasma evolution. The photoionization process in air (N 2 – O 2 mixture) is often described by the Zheleznyak model (1982). This model is usually solved through Helmholtz-type equations that approximate the Zheleznyak photoionization model (Zheleznyak et al. 1982) as Partial Differential Equations (PDEs). Conventional numerical methods, such as the Finite Difference Method (FDM) or Finite Volume Method (FVM), are widely used to solve these equations. Although they are prevalent, the computational cost of these methods due to their need for matrix operations and iterative solver is demanding. To address this challenge, this work develops a spectral solver based on the Fast Fourier Transform (FFT) combined with Discrete Cosine Transform (DCT) and Discrete Sine Transform (DST) to calculate the photoionization rate efficiently in an axisymmetric cylindrical domain. This method naturally satisfies the boundary conditions used in the model and converts the PDE into algebraic ones in spectral space. Thus, avoids the need for iterative matrix solvers. When compared with FDM results, it is demonstrated that the new solver not only maintains accuracy, but also reduces the computational cost, showing a performance increase of approximately 100 compared to FDM over a wide range of problem sizes. The method is parallelized using Message Passing Interface (MPI) and has been integrated into a fluid plasma model for streamer simulation. Here, this FFT-based approach provides a fast and reliable alternative for calculating photoionization in fluid models, helping large-scale plasma simulations run faster and efficiently, and allows higher-resolution simulation without extra computational cost.

Axisymmetric system↗

NASA NTRS1998

A New Approximate Chimera Donor Cell Search Algorithm

The objectives of this study were to develop chimera-based full potential methodology which is compatible with overflow (Euler/Navier-Stokes) chimera flow solver and to develop a fast donor cell search algorithm that is compatible with the chimera full potential approach. Results of this work included presenting a new donor cell search algorithm suitable for use with a chimera-based full potential solver. This algorithm was found to be extremely fast and simple producing donor cells as fast as 60,000 per second.

Holst, Terry L.↗

DOE OSTI2025

Efficient shallow Ritz method for 1D diffusion problems

This paper studies the shallow Ritz method for solving the one-dimensional diffusion problem. It is shown that the shallow Ritz method improves the order of approximation dramatically for non-smooth problems. To realize this optimal or nearly optimal order of the shallow Ritz approximation, we develop a damped block Newton (dBN) method that alternates between updates of the linear and non-linear parameters. Per each iteration, the linear and the non-linear parameters are updated by exact inversion and one step of a modified, damped Newton method applied to a reduced non-linear system, respectively. The computational cost of each dBN iteration is $\mathcal{O}$(n). Starting with the non-linear parameters as a uniform partition of the interval, numerical experiments show that the dBN is capable of efficiently moving mesh points to nearly optimal locations. In conclusion, to improve the efficiency of the dBN further, we propose an adaptive damped block Newton (AdBN) method by combining the dBN with the adaptive neuron enhancement (ANE) method [28].

Diffusion problems↗

DOE OSTI2026

Regularizing INR with Diffusion Prior for Self-Supervised 3D Reconstruction OF Neutron Computed Tomography Data

Recently, generative diffusion priors have made huge strides as inverse problem solvers, including the ability to be adapted for inference on out-of-distribution data. Concurrently, implicit neural representations (INRs) have emerged as fast and lightweight inverse imaging solvers that are amenable to hybrid approaches that combine learned priors with traditional inverse problem formulations. In this paper, we present a diffusive computed tomography (CT) inversion framework for regularizing INRs called Diffusive INR (DINR), designed to enable high-quality reconstruction from sparse-view neutron CT. Pretrained purely on synthetic data, DINR is evaluated on simulated and experimentally obtained observations of concrete microstructures, where traditional reconstruction methods suffer substantial degradation when the number of views is reduced. Our approach delivers superior performance, reduces reconstruction artifacts, and achieves gains in PSNR and SSIM, enabling accurate micro-structural characterization even under extreme data limitations compared to state-of-the-art sparse-view reconstruction techniques.

Hossain, Maliha [ORNL]↗

NASA NTRS1974

Fast direct numerical solution of the nonhomogeneous Cauchy-Riemann equations

A fast direct (noniterative) 'Cauchy-Riemann Solver' is developed for solving the finite-difference equations representing systems of first-order elliptic partial differential equations in the form of the nonhomogeneous Cauchy-Riemann equations. The method is second-order accurate and requires approximately the same computer time as a fast cyclic-reduction Poisson solver. The accuracy and efficiency of the direct solver are demonstrated in an application to solving an example problem in aerodynamics: subsonic inviscid flow over a biconvex airfoil. The analytical small-perturbation solution contains singularities, which are captured well by the computational technique. The algorithm is expected to be useful in nonlinear subsonic and transonic aerodynamics.

Lomax, H.↗

NASA NTRS1990

The semidiscrete Galerkin finite element modeling of compressible viscous flow past an airfoil

The primary project was the numerical simulation, by a finite element/finite difference method, of the viscous flow about an airfoil. The secondary project involved the numerical simulation of the three-dimensional separated and vortex-dominated flow about a hemispherically capped cylinder in the transonic regime. Preliminary calculations were started for the hemisphere-cylinder at 0 and 5 degree angle of attack. The solution of the flow field about airfoils and wings is required to determine the important parameters of lift, moment, and drag. Viscous effects must be accounted for if the drag is to be accurately calculated. At present there are basically two approaches to the numerical simulation of the flow field, the use of fully viscous models and the inviscid/viscous models. The fully viscous models require the solution of an approximation of the Navier-Stokes equations and therefore should simulate most of the physical mechanisms. A fast, accurate, and computationally efficient inviscid flow solver was recently developed by Hartwich. It is thought that Hartwich's program coupled to a fast, accurate, and computationally efficient boundary layer code, will make an excellent tool for airfoil design. The purpose of the primary project was to develop a compressible boundary layer code using the semidiscrete Galerkin finite element method. The numerical scheme employed used the combination of a Dorodnitsyn formulation of the boundary layer equations, with a finite difference/finite element procedure (semidiscrete Galerkin method), in the solution of the compressible two-dimensional boundary layer equations. A laminar compressible boundary layer code was developed and tested for a NACA 0012 airfoil at a Mach number of 0.5, a Reynolds number of 5000, and zero angle of attack. At present the boundary layer program solves up to, but not beyond, separation.

Meade, Andrew J.↗

DOE OSTI2024

Swift

Swift is a fast Fourier transform based spectral solver based on the MOOSE framework. It supports GPU accelerated semi-implicit solves of partial differential equations, such as those used for phase field mesoscale microstructure evolution.

Schwen, Daniel [Idaho National Laboratory (INL), I↗

NASA NTRS1974

A generalized-capacity-matrix technique for computing aerodynamic flows

A numerical generalized-capacity-matrix technique is developed for application to aerodynamic flow computations. This technique allows the very fast direct (noniterative) numerical elliptic solvers to be used in problems with arbitrary internal boundaries and with a wide class of boundary conditions, including numerical application of the Kutta condition on an airfoil without iteration. Accuracy, speed, and usefulness of the technique are demonstrated with linear problems for potential flows over airfoil shapes. The method's main advantages, however, can be exploited within iterative procedures for a variety of complex flow problems governed by systems of equations not necessarily elliptic or linear.

Martin, E. D.↗

NASA NTRS1978

Semidirect calculation of steady two- and three-dimensional flows

This paper describes a semidirect method for rapidly solving steady-state viscous flows described by the complete Navier-Stokes equations. The current results are for two-dimensional incompressible flows in general channels at arbitrary Reynolds numbers, but work in progress on compressible and three-dimensional flows is also described. The basic concept of semidirect methods is to use the recently developed fast (direct, or noniterative) linear solvers to solve linearized equations, which are then iterated to solve the nonlinearity. The method used here is an extension of the Split NOS method (Roache, 1975)

Roache, P. J.↗

NASA NTRS1986

An efficient adaptive patched grid gas dynamic solver for complex flows

The patched mesh CSCM flow solver is used with a fast adaptive grid technique to compute complex two dimensional and axisymmetric, inviscid and viscous flows accurately and efficiently. The patched grid technique allows the user to generate the initial grid around complex regions with minimal effort. The adaptive grid strategy permits the grid points to adjust to the solution in accordance with the flow structure and user specified grid constraints and thus improve the accuracy of the solution. Solutions to challenging flow problems are obtained with adapted grids and the numerical examples and the results presented here show clearly the effectiveness of the adaptive grid solution strategy to obtain highly accurate numerical solutions with minimal human effort and computational resources.

Venkatapathy, E.↗

NASA NTRS1992

Parallel computational fluid dynamics - Implementations and results

The present volume on parallel CFD discusses implementations on parallel machines, numerical algorithms for parallel CFD, and performance evaluation and computer science issues. Attention is given to a parallel algorithm for compressible flows through rotor-stator combinations, a massively parallel Euler solver for unstructured grids, a fast scheme to analyze 3D disk airflow on a parallel computer, and a block implicit multigrid solution of the Euler equations. Topics addressed include a 3D ADI algorithm on distributed memory multiprocessors, clustered element-by-element computations for fluid flow, hypercube FFT and the Fourier pseudospectral method, and an investigation of parallel iterative algorithms for CFD. Also discussed are fluid dynamics using interface methods on parallel processors, sorting for particle flow simulation on the connection machine, a large grain mapping method, and efforts toward a Teraflops capability for CFD.

Simon, Horst D.↗