Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “exponential time integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Multi-energy reconstructions, central electron temperature measurements, and early detection of the birth and growth of runaway electrons using a versatile soft x-ray pinhole camera at MST

A multi-energy soft x-ray pinhole camera has been designed, built, and deployed at the Madison Symmetric Torus to aid the study of particle and thermal transport, as well as MHD stability physics. This novel imaging diagnostic technique employs a pixelated x-ray detector in which the lower energy threshold for photon detection can be adjusted independently on each pixel. The detector of choice is a PILATUS3 100 K with a 450 μm thick silicon sensor and nearly 100 000 pixels sensitive to photon energies between 1.6 and 30 keV. An ensemble of cubic spline smoothing functions has been applied to the line-integrated data for each time-frame and energy-range, obtaining a reduced standard-deviation when compared to that dominated by photon-noise. The multi-energy local emissivity profiles are obtained from a 1D matrix-based Abel-inversion procedure. Central values of Te can be obtained by modeling the slope of the continuum radiation from ratios of the inverted radial emissivity profiles over multiple energy ranges with no a priori assumptions of plasma profiles, magnetic field reconstruction constraints, high-density limitations, or need of shot-to-shot reproducibility. In tokamak plasmas, a novel application has recently been tested for early detection, 1D imaging, and study of the birth, exponential growth, and saturation of runaway electrons at energies comparable to 100 × Te,0; thus, early results are also presented.

Delgado-Aparicio, L. F. (ORCID:0000000167394380)↗
DOE OSTI2023

Generation of Near-Equipartition Magnetic Fields in Turbulent Collisionless Plasmas

The mechanisms that generate “seed” magnetic fields in our Universe and that amplify them throughout cosmic time remain poorly understood. By means of fully kinetic particle-in-cell simulations of turbulent, initially unmagnetized plasmas, here we study the genesis of magnetic fields via the Weibel instability and follow their dynamo growth up to near-equipartition levels. In the kinematic stage of the dynamo, we find that the rms magnetic field strength grows exponentially with rate γ B ≃0.4⁢u rms /L, where L/2⁢π is the driving scale and u rms is the rms turbulent velocity. In the saturated stage, the magnetic field energy reaches about half of the turbulent kinetic energy. Here, magnetic field growth is balanced by dissipation via reconnection, as revealed by the appearance of plasmoid chains. At saturation, the integral-scale wave number of the magnetic spectrum approaches k int ≃12⁢π/L. Our results show that turbulence—induced by, e.g., the gravitational buildup of galaxies and galaxy clusters—can magnetize collisionless plasmas with large-scale near-equipartition fields.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

EVSE Cybersecurity and Resilience

Consequence-driven Cybersecurity Analysis for Extreme Fast Charging Electric Vehicle Infrastructure Electric vehicle (EV) development and associated charging infrastructure are expected to advance rapidly. Thirty percent of all global vehicle sales may be EVs and hybrid EVs by 2025, and they will rely on increasingly sophisticated strategies for grid integration. Next-generation EV charging infrastructure is expected to include interconnected renewable resources, such as photovoltaic (PV) arrays and battery storage systems, along with grid-edge devices. Although distributed energy resources (DERs) are useful in several ways, such as peak shaving at high demand times and backup supply for added resilience, the integration of vehicle charging and DERs could create more avenues for cyberattack. Physical and/or remote access to EV charging station components, including charge ports, power electronics, controllers, and local generation (e.g., PV and energy storage) could be paths to cause power fluctuations, leading to altered operations at the charging station, escalated privileges to administrative systems, exfiltration of financial information (including personally identifiable information), and reduced grid stability. One compromised EV supply equipment component can open the door to a variety of exploitable vulnerabilities. Cloud computing and mobile application control have the potential to expand the threat surface to non-repudiation and firmware integrity challenges. Vendor clouds have access to hundreds of chargers, and if compromised, can scale the attack surface exponentially. The high power and voltage levels of xFC infrastructure (e.g., 400 kW at 1000- V DC) increase the hazards and ability to impact the grid and vehicles more than lower-power charging systems. Legacy communications systems and protocols could also put EV infrastructure at risk of cyberattacks requiring a robust patch management process. Communications networks link EVs and chargers to several stakeholders - including charging station operators, grid operators, vendors/manufacturers, and aggregators - who have both physical and network access to share information for control, monitoring, and analytics. Information in these networks that is vulnerable to compromise includes the state of charge, charging duration, payment information, electricity price, and load control. Analyzing and prioritizing these interconnections risks could help address cybersecurity related to data leakage and manipulation.

charging↗
DOE OSTI2025

Anatomy of information scrambling and decoherence in the integrable Sachdev-Ye-Kitaev model

The growth of information scrambling, captured by out-of-time-order correlation functions (OTOCs), is a central indicator of the nature of many-body quantum dynamics. Here, we compute analytically the complete time dependence of the OTOC for an integrable Sachdev-Ye-Kitaev (SYK) model, 𝑁 Majoranas with random two-body interactions of infinite range, coupled to a Markovian bath at finite temperature. In the limit of no coupling to the bath, the time evolution of scrambling experiences different stages. For 𝑡≲√𝑁, after an initial polynomial growth, the OTOC approaches saturation in a power-law fashion with oscillations superimposed. At 𝑡∼√𝑁, the OTOC reverses trend and starts to decrease linearly in time. The reason for this linear decrease is that, despite being a subleading 1/𝑁 effect, the OTOC in this region is governed by the spectral form factor of the antisymmetric couplings of the SYK model. The linear decrease stops at 𝑡∼2⁢𝑁, the Heisenberg time, where saturation occurs. The effect of the environment is an overall exponential decay of the OTOC for times longer than the inverse of the coupling strength to the bath. Here, the oscillations at 𝑡≲√𝑁 indicate lack of thermalization—a desired feature for better performance of quantum information devices.

Open quantum systems & decoherence↗
DOE OSTI2021

Dimensionality reduction of the many-body problem using coupled-cluster subsystem flow equations: classical and quantum computing perspective

We discuss reduced-scaling strategies employing recently introduced sub-system embedding sub-algebras coupled-cluster formalism (SES-CC) to describe many-body systems. These strategies utilize properties of the SES-CC formulations where the equations describing certain classes of sub- systems can be integrated into a computational flows composed coupled eigenvalue problems of reduced dimensionality. Additionally, these flows can be defined at the level of the CC Ansatz defined by selected classes of cluster amplitudes, which define the wave function ”memory” of possible partitionings of the many-body system into constituent sub-systems. One of the possible ways of solving these coupled problems is through implementing procedures, where the information is passed between the sub-systems in a self-consistent manner. As a special case, we consider local flow formulations where the so-called local character of correlation effects can be closely related to properties of sub-system embedding sub-algebras employing localized molecular basis. We also generalize flow equations to the time domain and to downfolding methods utilizing double exponential unitary CC Ansatz (DUCC), where reduced dimensionality of constituent sub-problems offer a possibility of efficient utilization of limited quantum resources in modeling realistic systems.

Electron correlation, quantum chemistry, quantum c↗
DOE OSTI2023

Robust highly durable solid oxide fuel cell cathodes – Improved materials compatibility & self-regulating surface chemistry

Solid oxide fuel cells (SOFCs) are electrochemical conversion devices that directly transform hydrogen or hydrocarbon fuels to electricity, with energy efficiencies as high as 90%, coupled with reduced emissions. Several factors, however, remain to be addressed when considering scale-up of SOFC technology, including the need to overcome decreased performance due to sluggish rates of the oxygen reduction reaction (ORR) at the cathode under reduced temperatures and susceptibility to degradation in performance from surface poisoning e.g. from chromia, while limiting the use of critical raw materials (lanthanides and transition metals) present in high performing mixed ionic electronic conducting electrodes like (La,Sr)CoO 3 (LSC). In this project we explored the key descriptors for determining ORR activity in SOFC electrodes and tried to recover performance degradation by applying them to SOFC electrodes. In order to do this, we first selected a model mixed ionic electronic conducting (MIEC) oxide, Pr-doped CeO 2 (Pr 0.1 Ce 0.9 O 2-δ , PCO), which is a chemically stable fluorite and free of inherent poison sources (e.g. Sr segregation in LSC) that potentially react with external impurities such as Cr-species vaporized from the interconnect. The three approaches originally planned in this project are as follows: 1) evaluation of scavenger exsolution characteristics, 2) study of scavengers gettering efficacy following Cr and Si poisoning and 3) integration of new compositions into porous electrodes. Among them, exceptional progress has been made in 2) and 3), especially understanding the role of surface infiltrants in impacting electrode performance and degradation of PCO materials. We found that the Smith acidity scale for binary oxides serves as a powerful descriptor for tuning and predicting the oxygen exchange kinetics on MIEC PCO surfaces. As a result, with infiltration with binary oxides, ranging from strongly basic (Li 2 O) to strongly acidic (SiO 2 ) onto the surface of porous PCO, it was possible to systematically vary the chemical surface exchange coefficient (k chem ) by 6 orders of magnitude! L i2 O increased k chem by nearly 1,000 times over that of pristine PCO, while SiO 2 decreased k chem by nearly the same factor. Strikingly, although the pre-exponential of k chem scales linearly with the acidity of the infiltrated binary oxide, there is nearly no change in the activation energy. With this insight, we attributed the origin of these dramatic changes in k chem values to the systematic increase and decrease in the surface electron density induced by infiltrated binary oxides. More interestingly, although both Cr 2 O 3 and SiO 2 were determined to be acidic by Smith, suggesting that this feature could likely be the primary reason that these compounds serve to poison the ORR on SOFC cathodes, the effect of poisoning could be subsequently tuned by adding multiple infiltrants and controlling their relative surface acidities. We also systematically examined the effect of serial infiltration of basic and acidic oxides. It turned out that serial infiltration of Li not only recovers approximately 20-fold degraded k chem of PCO by acidic Cr 2 O 3 but its k chem is enhanced even beyond that of the non-infiltrated PCO by more than three orders of magnitude. This was further verified with a screen-printing PCO symmetric cell in terms of the electrode performance (area-specific resistance, ASR) related to approach 3). These observations point to acidity as a key descriptor not only in tuning and predicting the ORR activity of SOFC cathodes that largely determines the overall performance of SOFC, but in mitigating and reactivating poisoned electrode performance. This work provides novel guidelines for making the electrode performance much more active and robust in SOFCs, which can further be applied to all applications requiring oxygen exchange reaction, such as electrolyzers, permeation membranes and gas sensors.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Future of plasma etching for microelectronics: Challenges and opportunities

Plasma etching is an essential semiconductor manufacturing technology required to enable the current microelectronics industry. Along with lithographic patterning, thin-film formation methods, and others, plasma etching has dynamically evolved to meet the exponentially growing demands of the microelectronics industry that enables modern society. At this time, plasma etching faces a period of unprecedented changes owing to numerous factors, including aggressive transition to three-dimensional (3D) device architectures, process precision approaching atomic-scale critical dimensions, introduction of new materials, fundamental silicon device limits, and parallel evolution of post-CMOS approaches. The vast growth of the microelectronics industry has emphasized its role in addressing major societal challenges, including questions on the sustainability of the associated energy use, semiconductor manufacturing related emissions of greenhouse gases, and others. The goal of this article is to help both define the challenges for plasma etching and point out effective plasma etching technology options that may play essential roles in defining microelectronics manufacturing in the future. The challenges are accompanied by significant new opportunities, including integrating experiments with various computational approaches such as machine learning/artificial intelligence and progress in computational approaches, including the realization of digital twins of physical etch chambers through hybrid/coupled models. These prospects can enable innovative solutions to problems that were not available during the past 50 years of plasma etch development in the microelectronics industry. To elaborate on these perspectives, the present article brings together the views of various experts on the different topics that will shape plasma etching for microelectronics manufacturing of the future.

Engineering↗
DOE OSTI2020

Integration of Total-Sky Imager Data with a Physics-Based Smart Persistence Model for Intra-Hour Forecasting of Solar Radiation

Short-term solar forecasting models based solely on global horizontal irradiance (GHI) measurements are often unable to discriminate the forecasting of the factors affecting GHI from those that can be precisely computed by atmospheric models. Our previous study introduced a Physics-based Smart Persistence model for Intra-hour forecasting of solar radiation (PSPI) that decomposed the forecasting of GHI into the computation of extraterrestrial solar radiation and solar zenith angle and the forecasting of cloud albedo and cloud fraction. The extraterrestrial solar radiation and solar zenith angle were accurately computed by the Solar Position Algorithm (SPA) developed at the National Renewable Energy Laboratory (NREL). A cloud retrieval technique was used to estimate cloud albedo and cloud fraction from surface-based observations of GHI. With the assumption of persistent cloud structures, the cloud albedo and cloud fraction were predicted for future time steps using a two-stream approximation and a 5-minute exponential weighted moving average, respectively. The model evaluation indicated the estimation and forecast of cloud fraction mostly contributed to the uncertainty of the PSPI though it overcame the persistence and smart persistence models in all forecast time horizons between 5 and 60 minutes. This study aims to enhance the PSPI by ingesting surface-based observations of cloud fraction from a total sky imager (TSI). The estimation and forecast of cloud albedo is correspondingly improved by utilizing the cloud fraction observations and thus leads to more accurate GHI forecast. Various time-series analysis methods are also investigated on the forecasting of cloud fraction and cloud albedo for further improving the GHI forecast. These improvements are valuable for many applications, such as forecasting energy use for buildings, grid operations, and ultimately bringing down the cost of solar energy.

14 SOLAR ENERGY↗
DOE OSTI2021

Linear stability analysis of two fluid columns of different densities and viscosities in a gravity field

The linear stability of a vertical interface separating two miscible fluid columns of different densities and viscosities under the influence of gravity is investigated. This flow possesses a time-dependent reference state (each column accelerates at different rates owing to their different densities) and the interface thickness grows as the square root of time (by diffusion). Numerical integration of the linear initial-value problem is carried out and discussed in detail as a function of vertical and spanwise wavenumbers and the flow parameters. Adjoint-based optimization is performed in order to determine initial conditions that lead to maximum growth of disturbances in finite time. Results indicate that the rate of growth of the perturbation energy at small wavenumbers (less affected by viscosity initially) is dominated by two-dimensional modes (no spanwise variation). Substantial transient growth is observed at higher wave modes initially, followed by asymptotic decay of the perturbations at large time. Sensitivity of perturbation growth with respect to initial time, density and viscosity ratios is investigated. This work is complementary to previous inviscid analysis of this configuration, which showed that the interface was unconditionally unstable at all wave modes, even in the presence of surface tension, and that instability grew as the exponential of time squared.

Mechanics↗
DOE OSTI2022

Combined Cycle Integrated Thermal Energy Storage “CiTES” (Final Scientific/Technical Report)

The Phase I of this project confirmed the technical feasibility of a Combined Cycle integrated Thermal Energy Storage “CiTES” system, calculated the key performance parameters like power efficiency and costs, and proved its commercial value with full-year simulations for several US electricity markets with high degree of variable renewable generation and volatile hourly electricity prices. The core element of this project is the Electro Thermal Energy Storage (ETES) technology from Siemens Gamesa Renewable Energy GmbH, using thermally stable and inexpensive volcanic rocks as storage material and air as heat transfer medium. This technology is backed by more than 10 years of experience and a 440MMBTU (130MWh-th) pilot plant in Hamburg, Germany, which is in operation since 2019. The integration of this thermal storage in an existing combined cycle power plant (CCPP) is typical power plant technology without any major technology risks. It allows the storage of inexpensive renewable energy during times of surplus renewable generation and the discharge of this energy in times of high energy demand when the fossil plant is in operation. This supplements the fossil power generation with CO2-emission-free energy. The secondary effect of the CiTES system is that a small part of the stored thermal energy is used to keep the heat recovery steam generator (HRSG) and steam turbine (ST) of the combined cycle power plant in hot and ready-to-start condition. This enables the plant to start rapidly when fossil generation is required to satisfy demand as soon variable generation drops off in the evenings or during cloud cover and calm wind periods. Without pre-warming of the HRSG and ST, the CCPP would need several hours for a cold or warm start, burn a lot of gas and release high NOx emissions during start and wouldn’t be able to use the short times of high energy prices in an efficient or economical manner. The economic parameters of CiTES were determined by a full year “8760” simulation using a data set calculation for each of the hours of the year, and historical electricity and gas prices. For consistency, the simulations were focused on the pre-COVID year 2019. The financially most attractive markets were in the Energy Reliability Council of Texas (ERCOT) region, which allowed substantial value generation with arbitrage (charge with cheap energy during renewable surplus times and discharge when energy is needed and expensive). The improvement of flexibility with the CiTES system by pre-heating and warm-keeping of the CCPP allowed for additional power generation during short time periods when demand is high but renewable generation is down; when the hourly energy prices are highest in these markets. The simulations are based on 2019 data, when ERCOT had 27GW of installed photovoltaic (PV) and wind generation. They showed that the created revenue with the prototypically sized CiTES system of 1,000MMBTU (300MWh-th) falls a little bit short of what is expected from a commercially viable investment. The system has optimization opportunities for cost reduction and increased effectiveness which will be realized during a potential Phase II Pre-FEED study following this project. Furthermore, it is safe to assume that a lot of renewable generation capacity will be added all over the US in the coming years. As an example, ERCOT is predicting to more than double its renewable generation from 27GW in 2019 to a forecasted 63GW in 2023. This will increase the amount of renewable overproduction exponentially. This rapid increase of local overproduction and the need to curtail renewable generation is well documented by the California ISO (www.CAISO.com / managing oversupply). However, the simulations also revealed a weakness in the structure of the electricity markets in the US. More specifically, when electricity prices are very low and approaching negative levels, the owners of Variable Renewable Energy (VRE) will curtail a part of their facility to stabilize the price by reducing supply. This results in a situation in which storage facilities, which are integrated in existing fossil assets and don’t have the behind-the-meter benefit of a VRE, won’t be able to purchase low cost – otherwise curtailed – renewable energy off the grid. A special tariff, which motivates VRE owners to sell otherwise curtailed renewable energy to storage facilities (Hydrogen, thermal, pumped hydro, etc.) can solve this issue. The implementation of such a regulating tariff by Independent System Operators, thus avoiding renewable curtailment, is a pre condition for successful commercialization for renewable energy storage technologies. With this advancement of design and technology and improvements in the market environment, it can be expected that the Combined Cycle integrated Thermal Energy Storage proves itself as an important innovation to keep highly efficient, natural gas-based power generation economically successful and relevant for the power industry in the United States of America.

Wolf, Thorsten↗
DOE OSTI2025

Nonperturbative quantum gravity in a closed Lorentzian universe

We study how meaningful physical predictions can arise in nonperturbative quantum gravity in a closed Lorentzian universe. In such settings, recent developments suggest that the quantum gravitational Hilbert space is one-dimensional and real for each α-sector, as induced by spacetime wormholes. This appears to obstruct the conventional quantum-mechanical prescription of assigning probabilities via projection onto a basis of states. While previous approaches have introduced external observers or augmented the theory to resolve this issue, we argue that quantum gravity itself contains all the necessary ingredients to make physical predictions. We demonstrate that the emergence of classical observables and probabilistic outcomes can be understood as a consequence of partial observability: physical observers access only a subsystem of the universe. Tracing out the inaccessible degrees of freedom yields reduced density matrices that encode classical information, with uncertainties exponentially suppressed by the environment’s entropy. We develop this perspective using both the Lorentzian path integral and operator formalisms and support it with a simple microscopic model. Our results show that quantum gravity in a closed universe naturally gives rise to meaningful, robust predictions without recourse to external constructs.

AdS-CFT Correspondence↗
DOE OSTI2020

Measurement uncertainty of rossi-alpha neutron experiments

Rossi-alpha neutron experiments are used to estimate the prompt neutron decay constant of a fissile assembly, a quantity of widespread interest in applications including in nuclear nonproliferation and criticality safety. This work develops a mathematical model to efficiently estimate measurement uncertainty of Rossi-alpha neutron experiments inferred from a two-exponential fit model with histogram binning. The derived uncertainty estimates were validated using repeated Rossi-alpha measurements of a subcritical, 4.5-kg sphere of weapons-grade, alpha-phase plutonium with nickel, copper, tungsten, and polyethylene reflectors. The estimates of uncertainty for the histogram data produced by the model were conservative and agree with the reference uncertainties within noise. The estimates of the prompt neutron decay constant uncertainty agreed with the reference uncertainties within one standard deviation. In conclusion, the proposed model will reduce total measurement times, ultimately reducing operational and procedural costs in application.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

A Quantum-Classical Collaborative Training Architecture Based on Quantum State Fidelity

Recent advancements have highlighted the limitations of current quantum systems, particularly the restricted number of qubits available on near-term quantum devices. This constraint greatly inhibits the range of applications that can leverage quantum computers. Moreover, as the available qubits increase, the computational complexity grows exponentially, posing additional challenges. Consequently, there is an urgent need to use qubits efficiently and mitigate both present limitations and future complexities. To address this, existing quantum applications attempt to integrate classical and quantum systems in a hybrid framework. In this study, we concentrate on quantum deep learning and introduce a collaborative classical-quantum architecture called co-TenQu. The classical component employs a tensor network for compression and feature extraction, enabling higher-dimensional data to be encoded onto logical quantum circuits with limited qubits. On the quantum side, we propose a quantum-state-fidelity-based evaluation function to iteratively train the network through a feedback loop between the two sides. co-TenQu has been implemented and evaluated with both simulators and the IBM-Q platform. Compared to state-of-the-art approaches, co-TenQu enhances a classical deep neural network by up to 41.72% in a fair setting. Additionally, it outperforms other quantum-based methods by up to 1.9 times and achieves similar accuracy while utilizing 70.59% fewer qubits.

42 ENGINEERING↗
DOE OSTI2023

Holographic thermal correlators: a tale of Fuchsian ODEs and integration contours

We analyze real-time thermal correlation functions of conserved currents in holographic field theories using the grSK geometry, which provides a contour prescription for their evaluation. We demonstrate its efficacy, arguing that there are situations involving components of conserved currents, or derivative interactions, where such a prescription is, in fact, essential. To this end, we first undertake a careful analysis of the linearized wave equations in AdS black hole backgrounds and identify the branch points of the solutions as a function of (complexified) frequency and momentum. All the equations we study are Fuchsian with only regular singular points that for the most part are associated with the geometric features of the background. Special features, e.g., the appearance of apparent singular points at the horizon, whence outgoing solutions end up being analytic, arise at higher codimension loci in parameter space. Using the grSK geometry, we demonstrate that these apparent singularities do not correspond to any interesting physical features in higher-point functions. We also argue that the Schwinger-Keldysh collapse and KMS conditions, implemented by the grSK geometry, continue to hold even in the presence of such singularities. For charged black holes above a critical charge, we furthermore demonstrate that the energy density operator does not possess an exponentially growing mode, associated with ‘pole-skipping’, from one such apparent singularity. Our analysis suggests that the connection between the scrambling physics of black holes and energy transport has, at best, a limited domain of validity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Dynamical instability in multi-orbiter systems with gas friction

ABSTRACT Closely packed multiplanet systems are known to experience dynamical instability if the spacings between the planets are too small. Such instability can be tempered by the frictional forces acting on the planets from gaseous discs. A similar situation applies to stellar-mass black holes embedded in active galactic nuclei discs around supermassive black holes. We use N-body integrations to evaluate how the frictional damping of orbital eccentricity affects the growth of dynamical instability for a wide range of K (the difference in the planetary semimajor axes in units of the mutual Hill radius) and (unequal) planet masses. We find that, in general, the stable region (large K) and unstable region (small K) are separated by a “grey zone”, where the (in)stability is not guaranteed. We report the numerical values of the critical spacing for stability Kcrit and the “grey zone” range in different systems, and provide fitting formulae for arbitrary frictional forcing strength. We show that the stability of a system depends on the damping time-scale τ relative to the zero-friction instability growth time-scale tinst: two-planet systems are stable if tinst ≳ τ; three-planet systems require tinst ≳ 10τ−100τ. When K is sufficiently small, tinst can be less than the synodic period between the planets, which makes frictional stabilization unlikely to occur. As K increases, tinst tends to grow exponentially, but can also fluctuate by a few orders of magnitude. We also devise a linear map to analyse the dynamical instability of the “planet + test mass” system, and find qualitative agreement with N-body simulations.

Li, Jiaru (ORCID:0000000155507421)↗
DOE OSTI2025

The gravitational path integral from an observer’s point of view

One of the fundamental problems in quantum gravity is to describe the experience of a gravitating observer in generic spacetimes. In this paper, we develop a framework for describing non-perturbative physics relative to an observer using the gravitational path integral. We apply our proposal to an observer that lives in a closed universe and one that falls behind a black hole horizon. We find that the Hilbert space that describes the experience of the observer is much larger than the Hilbert space in the absence of an observer. In the case of closed universes, the Hilbert space is not one-dimensional, as calculations in the absence of the observer suggest. Rather, its dimension scales exponentially with ${G}_{N}^{-1}$. Similarly, from an observer’s perspective, the dimension of the Hilbert space in a two-sided black hole is increased. We compute various observables probing the experience of a gravitating observer in this Hilbert space. We find that an observer experiences non-trivial physics in the closed universe in contrast to what it would see in a one-dimensional Hilbert space. In the two-sided black hole setting, our proposal implies that non-perturbative corrections to effective field theory for an infalling observer are suppressed until times exponential in the black hole entropy, resolving a recently-raised puzzle in black hole physics. While the framework that we develop is exemplified in the toy-model of JT gravity, most of our analysis can be extended to higher dimensions and, in particular, to generic spacetimes not admitting a conventional holographic description, such as cosmological universes or black hole interiors.

2D gravity↗
DOE OSTI2024

Pyrolysis of high-density polyethylene: Degradation behaviors, kinetics, and product characteristics

Pyrolysis is a promising technology for converting plastic waste into valuable raw materials while offering a potential solution to the global plastic pollution crisis. In this study, the thermal pyrolysis of high-density polyethylene (HDPE) is investigated in a drop tube reactor under nearly isothermal conditions. The impact of reaction temperature and gas/volatile residence time on carbon conversion and product distribution is examined across a range of 500–900°C and 3.6–32.2s, respectively. Non-condensable gas products detected by online mass spectrometry are H 2 , CH 4 , C 2 H 4 , C 2 H 6 , C 3 H 6 , and C 3 H 8 . At elevated temperatures and prolonged residence time, H 2 yield reaches as high as 8.6 wt% of the initial HDPE mass due to intensified cracking reactions of C 2 –C 3 hydrocarbons and long-chain aliphatic compounds. Consequently, pyrolysis tars consist mainly of polycyclic aromatic hydrocarbons (PAHs) with 5–7 rings, accompanied by visible coke deposition within the reactor. HDPE decomposition to volatiles is an endothermic process and it is complete at a temperature between 492°C and 525°C, depending on the heating rate employed, from non-isothermal thermogravimetric analysis and differential scanning calorimetry (TGA-DSC) measurements. The thermal degradation of HDPE pellets follows the two-dimensional nucleation growth model for conversion levels up to 0.8 with an apparent activation energy of 259–270 kJ/mol and a pre-exponential factor of 4.83 × 10 17 –1.37 × 10 19 min -1 , determined from various isoconversional methods such as Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, along with Criado's master plots. Further, these findings provide valuable insights into optimizing process parameters and refining reactor design for pyrolysis, which can be integrated with gasification and reforming processes to enhance hydrogen production on a larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Layer Time Control for Large Scale Additive Manufacturing Using High Performance Computing

This work proposes to optimize an additive manufacturing AM process to reduce energy and printing cost. The polymer AM process is inherently dependent on the time-temperature history of each layer to maintain geometric tolerances and mechanical integrity. Our preliminary study shows that regression-based layer time control model using thermal images could result in up to 30% build time reduction for simple geometries. This proposed work would use high-performance computing (HPC) to couple the data-driven model with thermal simulation for better predicting layer temperature profiles, improving throughput of large-scale additive manufacturing, and reducing its energy cost. We have developed a method to optimize a layer deposition time (a.k.a. layer time) for large-scale AM via physics-based simulations. A long layer time leads to an over-cooled surface on which a new layer is deposited, and therefore, it may result in a weak bonding or debonding between layers, cracking, or warping. A short layer time leads to a high temperature of the structure due to insufficient cooling, and therefore, the structure may not be stiff enough and may collapse during manufacturing. Therefore, it is important to estimate the optimal layer time in additive manufacturing for a high-quality product. The temperature of a top layer right before deposition is recommended to be slightly higher than the glass temperature of the material. A temperature cooling was approximated to an exponential function of time, and the optimized layer time was obtained based on a target temperature while maintaining a minimal printing time. The material used is carbon fiber-reinforced polycarbonate (CF/PC), and the large-scale deposition system used is LSAM TM from Thermwood Corporation. Three different layer time cases were used for experiments, and a series of thermal images were obtained via an infra-red (IR) camera during the entire AM processes. AM process simulations were performed using a finite element method and the temperature profiles from the simulation were in good agreements with those from experiments. The layer time optimization was performed based on the temperature profiles from the simulations. A layer temperature with the optimal layer time was confirmed as the target temperature through simulation. In addition to the development of a layer time optimization method, we have developed a numerical framework for AM simulation with element activations in sync with toolpath, based on an open source finite element framework, DEAL.II. A major portion of this work was presented at SAMPE 2022 Conference and Exhibition on May 2022, and published in Proceedings of SAMPE 2022.

42 ENGINEERING↗