Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “emissions quantification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

OPAD through 1991 - Status report no. 2

The Optical Plume Anomaly Detection (OPAD) experimental program has attempted to develop a rocket engine health monitor for the detection, and if possible the quantification, of anomalous atomic and molecular species in exhaust plumes. The test program has formulated instrument designs allowing both wide spectral range and high spectral resolution. Attention is presently given to OPAD data collected for the SSME at NASA-Marshall's technology test stand, with a view to spectral emissions at startup and variations in baseline plume emissions due to changes in rated power level.

Powers, W. T.↗
NASA NTRS2005

Implementing Recommendations of the Columbia Accident Investigation Board - Development of on-Orbit RCC Thermography

One of NASA s Space Shuttle Return-to-Flight (RTF) efforts has been to develop thermography for the on-orbit inspection of the Reinforced Carbon Carbon (RCC) portion of the Orbiter Wing Leading Edge (WLE). This paper addresses the capability of thermography to detect cracks in RCC by using in-plane thermal gradients that naturally occur on-orbit. Crack damage, which can result from launch debris impact, is a detection challenge for other on-orbit sensors under consideration for RTF, such as the Intensified Television Camera and Laser Dynamic Range Imager. We studied various cracks in RCC, both natural and simulated, along with material characteristics, such as emissivity uniformity, in steady-state thermography. Severity of crack, such as those likely and unlikely to cause burn through were tested, both in-air and in-vacuum, and the goal of this procedure was to assure crew and vehicle safety during re-entry by identification and quantification of a damage condition while on-orbit. Expected thermal conditions are presented in typical shuttle orbits, and the expected damage signatures for each scenario are presented. Finally, through statistical signal detection, our results show that even at very low in-plane thermal gradients, we are able to detect damage at or below the threshold for fatality in the most critical sections of the WLE, with a confidence exceeding 1 in 10,000 probability of false negative.

Ottens, Brian↗
NASA NTRS2021

Improved representation of the global dust cycle using observational constraints on dust properties and abundance

Even though desert dust is the most abundant aerosol by mass in Earth's atmosphere, atmospheric models struggle to accurately represent its spatial and temporal distribution. These model errors are partially caused by fundamental difficulties in simulating dust emission in coarse-resolution models and in accurately representing dust microphysical properties. Here we mitigate these problems by developing a new methodology that yields an improved representation of the global dust cycle. We present an analytical framework that uses inverse modeling to integrate an ensemble of global model simulations with observational constraints on the dust size distribution, extinction efficiency, and regional dust aerosol optical depth. We then compare the inverse model results against independent measurements of dust surface concentration and deposition flux and find that errors are reduced by approximately a factor of 2 relative to current model simulations of the Northern Hemisphere dust cycle. The inverse model results show smaller improvements in the less dusty Southern Hemisphere, most likely because both the model simulations and the observational constraints used in the inverse model are less accurate. On a global basis, we find that the emission flux of dust with a geometric diameter up to 20 µm (PM20) is approximately 5000 Tg yr−1, which is greater than most models account for. This larger PM20 dust flux is needed to match observational constraints showing a large atmospheric loading of coarse dust. We obtain gridded datasets of dust emission, vertically integrated loading, dust aerosol optical depth, (surface) concentration, and wet and dry deposition fluxes that are resolved by season and particle size. As our results indicate that this dataset is more accurate than current model simulations and the MERRA-2 dust reanalysis product, it can be used to improve quantifications of dust impacts on the Earth system.

Dust cycle↗
NASA NTRS2014

Aura OMI Observations of Global SO2 and NO2 Pollution from 2005 to 2013

The Ozone Monitoring Instrument (OMI), a NASA partnership with the Netherlands and Finland, flies on the NASA Aura satellite and uses reflected sunlight to measure the two critical atmospheric trace gases: nitrogen dioxide (NO2) and sulfur dioxide (SO2) characterizing daily air quality. Both gases and the secondary pollutants they produce (particulate matter, PM2.5, and tropospheric ozone) are USEPA designated criteria pollutants, posing serious threats to human health and the environment (e.g., acid rain, plant damage and reduced visibility). Our group at NASA GSFC has developed and maintained OMI standard SO2 and NO2 data products. We have recently released an updated version of the standard NO2 L2 and L3 products (SP v2.1) and continue improving the algorithm. We are currently in the process of releasing next generation pollution SO2 product, based on an innovative Principal Component Analysis (PCA) algorithm, which greatly reduces the noise and biases. These new standard products provide valuable datasets for studying anthropogenic pollution on local to global scales. Here we highlight some of the OMI observed changes in air quality over several regions. Over the US average NO2 and SO2 pollution levels had decreased dramatically as a result of both technological improvements (e.g., catalytic converters on cars) and stricter regulations of emissions. We see continued decline in pollution over Europe. Over China OMI observed an increase of about 60 percent in NO2 pollution between 2005 and 2013, despite a temporal reversal of the growing trend due to both 2008 Olympic Games and the economic recession in 2009. Chinese SO2 pollution seems to have stabilized since peaking in 2007, probably due to government efforts to curb SO2 emissions from the power sector. We have also observed large increases in both SO2 and NO2 pollution particularly in Eastern India where a number of large new coal power plants had been built in recent years. We expect that further improvements in the OMI NO2 and SO2 products will allow more robust quantification of long-term trends in global air quality.

SO2↗
NASA NTRS2021

Improved Representation of the Global Dust Cycle Using Observational Constraints on Dust Properties and Abundance

Even though desert dust is the most abundant aerosol by mass in Earth’s atmosphere, atmospheric models 25 struggle to accurately represent its spatial and temporal distribution. These model errors are partially caused byfundamental difficulties in simulating dust emission in coarse-resolution models and in accurately representing dust microphysical properties. Here we mitigate these problems by developing a new methodology that yields an improved representation of the global dust cycle. We present an analytical framework that uses inverse modeling to integrate an ensemble of global model simulations with observational constraints on the dust size distribution, 30 extinction efficiency, and regional dust aerosol optical depth. We then compare the inverse model results against independent measurements of dust surface concentration and deposition flux and find that errors are reduced by approximately a factor of two relative to current model simulations of the Northern Hemisphere dust cycle. The inverse model results show smaller improvements in the less dusty Southern Hemisphere, most likely because both the model simulations and the observational constraints used in the inverse model are less accurate. On a global 35 basis, we find that the emission flux of dust with geometric diameter up to 20 μm (PM20) is approximately 5,000 Tg/year, which is greater than most models account for. This larger PM20 dust flux is needed to match observational constraints showing a large atmospheric loading of coarse dust. We obtain gridded data sets of dust emission, vertically integrated loading, dust aerosol optical depth, (surface) concentration, and wet and dry deposition fluxes that are resolved by season and particle size. As our results indicate that this data set is more accurate than current 40 model simulations and the MERRA-2 dust reanalysis product, it can be used to improve quantifications of dust impacts on the Earth system.

aerosols, dust↗
NASA NTRS2003

Quantification of Energy Release in Composite Structures

Energy release rate is usually suggested as a quantifier for assessing structural damage tolerance. Computational prediction of energy release rate is based on composite mechanics with micro-stress level damage assessment, finite element structural analysis and damage progression tracking modules. This report examines several issues associated with energy release rates in composite structures as follows: Chapter I demonstrates computational simulation of an adhesively bonded composite joint and validates the computed energy release rates by comparison with acoustic emission signals in the overall sense. Chapter II investigates the effect of crack plane orientation with respect to fiber direction on the energy release rates. Chapter III quantifies the effects of contiguous constraint plies on the residual stiffness of a 90 deg ply subjected to transverse tensile fractures. Chapter IV compares ICAN and ICAN/JAVA solutions of composites. Chapter V examines the effects of composite structural geometry and boundary conditions on damage progression characteristics.

Minnetyan, Levon↗
NASA NTRS2003

Quantification of Energy Release in Composite Structures

Energy release rate is usually suggested as a quantifier for assessing structural damage tolerance. Computational prediction of energy release rate is based on composite mechanics with micro-stress level damage assessment, finite element structural analysis and damage progression tracking modules. This report examines several issues associated with energy release rates in composite structures as follows: Chapter I demonstrates computational simulation of an adhesively bonded composite joint and validates the computed energy release rates by comparison with acoustic emission signals in the overall sense. Chapter II investigates the effect of crack plane orientation with respect to fiber direction on the energy release rates. Chapter III quantifies the effects of contiguous constraint plies on the residual stiffness of a 90 ply subjected to transverse tensile fractures. Chapter IV compares ICAN and ICAN/JAVA solutions of composites. Chapter V examines the effects of composite structural geometry and boundary conditions on damage progression characteristics.

Minnetyan, Levon↗
NASA NTRS2012

Characterization of Material Response During Arc-Jet Testing with Optical Methods Status and Perspectives

The characterization of ablation and recession of heat shield materials during arc jet testing is an important step towards understanding the governing processes during these tests and therefore for a successful extrapolation of ground test data to flight. The behavior of ablative heat shield materials in a ground-based arc jet facility is usually monitored through measurement of temperature distributions (across the surface and in-depth), and through measurement of the final surface recession. These measurements are then used to calibrate/validate materials thermal response codes, which have mathematical models with reasonably good fidelity to the physics and chemistry of ablation, and codes thus calibrated are used for predicting material behavior in flight environments. However, these thermal measurements only indirectly characterize the pyrolysis processes within an ablative material pyrolysis is the main effect during ablation. Quantification of pyrolysis chemistry would therefore provide more definitive and useful data for validation of the material response codes. Information of the chemical products of ablation, to various levels of detail, can be obtained using optical methods. Suitable optical methods to measure the shape and composition of these layers (with emphasis on the blowing layer) during arc jet testing are: 1) optical emission spectroscopy (OES) 2) filtered imaging 3) laser induced fluorescence (LIF) and 4) absorption spectroscopy. Several attempts have been made to optically measure the material response of ablative materials during arc-jet testing. Most recently, NH and OH have been identified in the boundary layer of a PICA ablator. These species are suitable candidates for a detection through PLIF which would enable a spatially-resolved characterization of the blowing layer in terms of both its shape and composition. The recent emission spectroscopy data will be presented and future experiments for a qualitative and quantitative characterization of the material response of ablative materials during arc-jet testing will be discussed.

Winter, Michael↗
NASA NTRS1992

X-Ray Microanalysis and Electron Energy Loss Spectrometry in the Analytical Electron Microscope: Review and Future Directions

This paper reviews and discusses future directions in analytical electron microscopy for microchemical analysis using X-ray and Electron Energy Loss Spectroscopy (EELS). The technique of X-ray microanalysis, using the ratio method and k(sub AB) factors, is outlined. The X-ray absorption correction is the major barrier to the objective of obtaining I% accuracy and precision in analysis. Spatial resolution and Minimum Detectability Limits (MDL) are considered with present limitations of spatial resolution in the 2 to 3 microns range and of MDL in the 0.1 to 0.2 wt. % range when a Field Emission Gun (FEG) system is used. Future directions of X-ray analysis include improvement in X-ray spatial resolution to the I to 2 microns range and MDL as low as 0.01 wt. %. With these improvements the detection of single atoms in the analysis volume will be possible. Other future improvements include the use of clean room techniques for thin specimen preparation, quantification available at the I% accuracy and precision level with light element analysis quantification available at better than the 10% accuracy and precision level, the incorporation of a compact wavelength dispersive spectrometer to improve X-ray spectral resolution, light element analysis and MDL, and instrument improvements including source stability, on-line probe current measurements, stage stability, and computerized stage control. The paper reviews the EELS technique, recognizing that it has been slow to develop and still remains firmly in research laboratories rather than in applications laboratories. Consideration of microanalysis with core-loss edges is given along with a discussion of the limitations such as specimen thickness. Spatial resolution and MDL are considered, recognizing that single atom detection is already possible. Plasmon loss analysis is discussed as well as fine structure analysis. New techniques for energy-loss imaging are also summarized. Future directions in the EELS technique will be the development of new spectrometers and improvements in thin specimen preparation. The microanalysis technique needs to be simplified and software developed so that the EELS technique approaches the relative simplicity of the X-ray technique. Finally, one can expect major improvements in EELS imaging as data storage and processing improvements occur.

Goldstein, J. I.↗
NASA NTRSDate not supplied

Rapidly Approaching A Thermal Tolerance Tipping Point in the Eurasian Boreal Forest at Its Southern Margins

Extreme heat is becoming increasingly common across the boreal biome. Better quantification of vegetation physiology and thermal tolerance is needed to predict ecological responses to these events. Here we report that Larix sibirica, a foundation species across boreal Eurasia, has a low thermal tolerance of photosynthesis (Tcrit: ~40-48°C) at its southern range margin. Projections from Earth System Models (ESMs) participating in CMIP6 suggest that Larix sibirica’s leaf temperature might routinely exceed its Tcrit under high emission scenarios (SSP5-8.5 and SSP3-7.0) by 2050. Such exceedances would cause sustained damage to Larix sibirica’s photosynthetic apparatus and its ability to assimilate carbon. This work highlights that we may be rapidly approaching ecological tipping point in boreal Eurasia within the next two to three decades. It also demonstrates the urgent need to consider thermal tolerance information to forecast the terrestrial carbon cycle and presents a framework to do so.

Eurasian boreal forest↗
NASA NTRS1985

Passive microwave soil moisture research

The AgRISTARS Soil Moisture Project has made significant progress in the quantification of microwave sensor capabilities for soil moisture remote sensing. The 21-cm wavelength has been verified to be the best single channel for radiometric observations of soil moisture. It has also been found that other remote sensing approaches used in conjunction with L-band passive data are more successful than multiple wavelength microwave radiometry in this application. AgRISTARS studies have also improved current understanding of noise factors affecting the interpretability of microwave emission data. The absorption of soil emission by vegetation has been quantified, although this effect is less important than absorption effects for microwave radiometry.

Schmugge, T. J.↗
NASA NTRSDate not supplied

From CMS to the U.S. Greenhouse Gas Center – Improved Tracking of Recent Changes in Co 2 and Ch 4 From NASA’s Quasi-Operational Modeling Systems

Reliable, low latency delivery of high quality global flux and concentration information is a growing but still unmet need to advance expanding measurement, monitoring, reporting, and verification efforts that underpin federal climate mitigation strategies. Here we present on progress toward developing space-based greenhouse gas (GHG) monitoring systems that can provide comprehensive information trailing real time by a matter of weeks to a few months. Through support from its Carbon Monitoring System (CMS) program, NASA has developed the capability to assimilate XCO 2 retrievals from the Orbiting Carbon Observatory, 2 (OCO 2 ) into the Goddard Earth Observing System (GEOS) Constituent Data Assimilation System (CoDAS) to create gap-filled, three-dimensional (3D) estimates of CO 2 mixing ratio. When observations are unavailable, concentration fields are further informed by observationally-informed bottom-up flux packages that incorporate remotely sensed fire, nighttime lights, and vegetation observations combined with estimates of atmospheric growth rate based on surface in situ data. The 3D nature of these datasets supports evaluation with independent aircraft data to improve confidence in satellite data, development of new regional modeling approaches, and quantification of the climate impacts of GHGs. The system has recently been expanded to assimilate XCH 4 from ESA’s TROPOspheric Monitoring Instrument (TROPOMI) instrument and is supported by companion efforts to improve delivery of estimates of bottom-up land and ocean fluxes. The quasi-operational GEOS-GHG system is contributing to the recently announced U.S. Greenhouse Gas Center (GHG Center) by delivering information on recent changes in CO 2 and CH 4 emissions and concentrations to support stakeholder and research communities. In this presentation, we provide an overview of the current system configured to support the GHG Center. We highlight examples of how this data contributes to broader NASA initiatives including the Earth Information Center, an innovative virtual and physical exhibit designed to show how NASA data helps the nation combat climate change. We conclude by discussing how innovations in CMS research can address remaining data gaps and modeling challenges to advance operational GHG monitoring in the future.

Lesley Ott↗
NASA NTRS2021

Intergenerational Inequities in Exposure to Climate Extremes: Young Generations Are Severely Threatened By Climate Change

Under continued global warming, extreme events such as heat waves will continue to rise in frequency, intensity, duration, and spatial extent over the next decades. Younger generations are therefore expected to face more such events across their lifetimes compared with older generations. This raises important issues of solidarity and fairness across generations that have fueled a surge of climate protests led by young people in recent years and that underpin issues of intergenerational equity raised in recent climate litigation. However, the standard scientific paradigm is to assess climate change in discrete time windows or at discrete levels of warming, a “period” approach that inhibits quantification of how much more extreme events a particular generation will experience over its lifetime compared with another. By developing a “cohort” perspective to quantify changes in lifetime exposure to climate extremes and compare across generations (see the first figure), we estimate that children born in 2020 will experience a two- to sevenfold increase in extreme events, particularly heat waves, compared with people born in 1960, under current climate policy pledges. Our results highlight a severe threat to the safety of young generations and call for drastic emission reductions to safeguard their future. Meteorological extremes, hazards, or climate change impacts are mostly studied as they evolve over time under varying emission scenarios and socioeconomic pathways. For example, applying a heat wave indicator (see table S1) to four bias-adjusted global climate models indicates that the land area annually affected by such heat waves will increase from ~15% around 2020 to ~22% by 2100 under a scenario compatible with limiting global warming to 1.5°C, and to ~46% under a scenario in line with current emission reduction pledges (see the first figure). Recent studies extended this approach, studying aspects of climate change as a function of global mean temperature (GMT) increments, highlighting the scenario-independence of several extreme event indicators but remaining, in essence, a comparison of time windows. By contrast, we performed a birth cohort analysis by combining a collection of multimodel extreme event projections with country-scale life expectancy information, gridded population data, and future global temperature trajectories from the Intergovernmental Panel on Climate Change (IPCC) Special Report on Global Warming of 1.5°C (see supplementary materials). By integrating the exposure of an average person in a country or region to extreme events across their lifetime, we encapsulate spatiotemporal changes in climate hazards, population density, cohort size, and life expectancy (see the first figure).

global warming↗
NASA NTRS2014

The 183-WSL Fast Rain Rate Retrieval Algorithm. Part II: Validation Using Ground Radar Measurements

The Water vapour Strong Lines at 183 GHz (183-WSL) algorithm is a method for the retrieval of rain rates and precipitation type classification (convectivestratiform), that makes use of the water vapor absorption lines centered at 183.31 GHz of the Advanced Microwave Sounding Unit module B (AMSU-B) and of the Microwave Humidity Sounder (MHS) flying on NOAA-15-18 and NOAA-19Metop-A satellite series, respectively. The characteristics of this algorithm were described in Part I of this paper together with comparisons against analogous precipitation products. The focus of Part II is the analysis of the performance of the 183-WSL technique based on surface radar measurements. The ground truth dataset consists of 2.5 years of rainfall intensity fields from the NIMROD European radar network which covers North-Western Europe. The investigation of the 183-WSL retrieval performance is based on a twofold approach: 1) the dichotomous statistic is used to evaluate the capabilities of the method to identify rain and no-rain clouds; 2) the accuracy statistic is applied to quantify the errors in the estimation of rain rates.The results reveal that the 183-WSL technique shows good skills in the detection of rainno-rain areas and in the quantification of rain rate intensities. The categorical analysis shows annual values of the POD, FAR and HK indices varying in the range 0.80-0.82, 0.330.36 and 0.39-0.46, respectively. The RMSE value is 2.8 millimeters per hour for the whole period despite an overestimation in the retrieved rain rates. Of note is the distribution of the 183-WSL monthly mean rain rate with respect to radar: the seasonal fluctuations of the average rainfalls measured by radar are reproduced by the 183-WSL. However, the retrieval method appears to suffer for the winter seasonal conditions especially when the soil is partially frozen and the surface emissivity drastically changes. This fact is verified observing the discrepancy distribution diagrams where2the 183-WSL performs better during the warm months, while during the winter time the discrepancies with radar measurements tends to maximum values. A stable behavior of the 183-WSL algorithm is demonstrated over the whole study period with an overall overestimation for rain rates intensities lower than 1 millimeter per hour. This threshold is crucial especially in wintertime where the low precipitation regime is difficult to be classified.

validationradar↗
NASA NTRS1995

The 1995 scientific assessment of the atmospheric effects of stratospheric aircraft

This report provides a scientific assessment of our knowledge concerning the impact of proposed high-speed civil transport (HSCT) aircraft on the atmosphere. It comes at the end of Phase 1 of the Atmospheric Effects of Stratospheric Aircraft element of the NASA High-Speed Research Program. The fundamental problem with stratospheric flight is that pollutant residence times are long because the stratosphere is a region of permanent temperature inversion with stable stratification. Using improved two-dimensional assessment models and detailed fleet emissions scenarios, the assessment examines the possible impact of the range of effluents from aircraft. Emphasis is placed on the effects of NO(x) and H2O on the atmospheric ozone content. Measurements in the plume of an in-flight Concorde supersonic transport indicated a large number of small particles. These measurements, coupled with model sensitivity studies, point out the importance of obtaining a more detailed understanding of the fate of sulfur in the HSCT exhaust. Uncertainties in the current understanding of the processes important for determining the overall effects of HSCT's on the atmosphere are discussed and partially quantified. Research directions are identified to improve the quantification of uncertainties and to reduce their magnitude.

Stolarski, Richard S.↗
NASA NTRS1996

Precipitable Water Variability Using SSM/I and GOES VAS Pathfinder Data Sets

Determining moisture variability for all weather scenes is critical to understanding the earth's hydrologic cycle and global climate changes. Remote sensing from geostationary satellites provides the necessary temporal and spatial resolutions necessary for global change studies. Due to antenna size constraints imposed with the use of microwave radiometers, geostationary satellites have carried instruments passively measuring radiation at infrared wavelengths or shorter. The shortfall of using infrared instruments in moisture studies lies in its inability to sense terrestrial radiation through clouds. Microwave emissions, on the other hand, are mostly unaffected by cloudy atmospheres. Land surface emissivity at microwave frequencies exhibit both high temporal and spatial variability thus confining moisture retrievals at microwave frequencies to over marine atmospheres (a near uniform cold background). This study intercompares the total column integrated water content Precipitable Water, (PW) as derived from both the Special Sensor Microwave Imager (SSM/I) and the Geostationary Operational Environmental Satellite (GOES) VISSR Atmospheric Sounder (VAS) pathfinder data sets. PW is a bulk parameter often used to quantify moisture variability and is important to understanding the earth's hydrologic cycle and climate system. This research has been spawned in an effort to combine two different algorithms which together can lead to a more comprehensive quantification of global water vapor. The approach taken here is to intercompare two independent PW retrieval algorithms and to validate the resultant retrievals against an existing data set, namely the European Center for Medium range Weather Forecasts (ECMWF) model analysis data.

Lerner, Jeffrey A.↗
NASA NTRS2022

Global Dust Cycle and Direct Radiative Effect in E3SM Version 1: Impact of Increasing Model Resolution

Quantification of dust aerosols in Earth System Models (ESMs) has important implications for water cycle and biogeochemistry studies. This study examines the global life cycle and direct radiative effects (DREs) of dust in the U.S. Department of Energy's Energy Exascale Earth System Model version 1 (E3SMv1), and the impact of increasing model resolution both horizontally and vertically. The default 1° E3SMv1 captures the spatial and temporal variability in the observed dust aerosol optical depth (DAOD) reasonably well, but overpredicts dust absorption in the shortwave (SW). Simulations underestimate the dust vertical and long-range transport, compared with the satellite dust extinction profiles. After updating dust refractive indices and correcting for a bias in partitioning size-segregated emissions, both SW cooling and longwave (LW) warming of dust simulated by E3SMv1 are increased and agree better with other recent studies. The estimated net dust DRE of −0.42 Wm−2 represents a stronger cooling effect than the observationally based estimate −0.2 Wm−2 (−0.48 to +0.2), due to a smaller LW warming. Constrained by a global mean DAOD, model sensitivity studies of increasing horizontal and vertical resolution show strong influences on the simulated global dust burden and lifetime primarily through the change of dust dry deposition rate; there are also remarkable differences in simulated spatial distributions of DAOD, DRE, and deposition fluxes. Thus, constraining the global DAOD is insufficient for accurate representation of dust climate effects, especially in transitioning to higher- or variable-resolution ESMs. Better observational constraints of dust vertical profiles, dry deposition, size, and LW properties are needed.

dust aerosol↗
NASA NTRSDate not supplied

166 GHz Ice Scattering Signal in Cold-Season Precipitating Cloud Systems

Surface snowfall can be produced by a variety of forcing mechanisms that are accompanied by different in-cloud physical processes and microphysical composition. For instance, shallow cumuliform snowfall forced by marine cold air outbreaks shows distinct geographic and seasonal signatures and plays in important role in annual snowfall production in many regions worldwide. Coincident CloudSat-CALIPSO observations confirm that oceanic regions exhibiting frequent shallow cumuliform snow are typically composed of mixed-phase cloud and precipitation particles and display passive microwave brightness temperature behavior that is dominated by cloud liquid water emission, while combined Global Precipitation Measurement (GPM) radiometer and surface radar studies of intense shallow cumuliform events indicate significant ice particle scattering signals at the highest GPM radiometer frequencies. Passive microwave imager channels in the 37 to 89 GHz range have long been used to detect precipitation-sized ice particle scattering signatures in clouds. Dual polarization plays an important role in distinguishing between scattering signatures and other background variability. The GPM Microwave Imager (GMI) is the first satellite radiometer to possess dual-polarized channels at 166 GHz. These high-frequency channels are more susceptible to emission and attenuation by cloud liquid water and water vapor than lower-frequency channels, but are also more sensitive to ice scattering. This research studies the ice scattering information contained in the 166 GHz channels compared to the historically used 85/89 GHz channels on previous sensors. A 166 GHz scattering index (SI) will be developed to understand how its correlation with non-precipitating ice scattering at higher altitudes also affects the 166 GHz scattering signature in cold-season precipitating cloud systems. The 166 GHz SI will be used to possibly isolate precipitation scattering signature for different snowfall modes (shallow convective vs. deep stratiform). The supercooled liquid water affecting shallow convective systems and drastically reducing the scattering signal could be detected and quantified, providing additional information for convective snow detection and quantification in solid precipitation retrieval algorithms.

Lisa Milani↗