Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effective resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Evaluation of idealized large-eddy simulations performed with the Weather Research and Forecasting model using turbulence measurements from a 250 m meteorological mast

Abstract. We investigate the ability of the Weather Research and Forecasting model to perform large-eddy simulation of canonical flows. This is achieved through comparison of the simulation outputs with measurements from sonic anemometers on a 250 m meteorological mast located at Østerild, in northern Denmark. Østerild is on a flat and rough area, and for the predominant wind directions, the atmospheric flow can be considered to be close to homogeneous. The idealized simulated flows aim at representing atmospheric boundary layer turbulence under unstable, neutral, and stable stability conditions at the surface, which are statistically significant conditions observed at Østerild. We found that the resolved fields from the simulations appear to have the characteristics of the three stability regimes. Vertical profiles of observed mean wind speeds and direction are well reproduced by the simulations, with the largest differences under near-neutral conditions, where the effect of the subgrid-scale model is evident on the vertical wind shear close to the surface. Vertical profiles of observed eddy fluxes are also well reproduced by the simulations, with the largest differences for the three velocity component variances under stable stability conditions, although nearly always within the observed variability. With regards to turbulent kinetic energy, we find good agreement between observations and simulations at all vertical levels. Simulated and observed velocity spectra match very well and show very similar behavior with height and with atmospheric stability within the low-frequency interval; at the effective resolution, the simulated spectra show the typical drop-off of finite differences. Our findings demonstrate that these idealized simulations reproduce the characteristics of atmospheric stability regimes often observed at a high turbulent and flat site within a direction sector, where the air flows over nearly homogeneous land.

17 WIND ENERGY↗

Decoupling of the onset of anharmonicity between a protein and its surface water around 200 K

The protein dynamical transition at ~200 K, where the biomolecule transforms from a harmonic, non-functional form to an anharmonic, functional state, has been thought to be slaved to the thermal activation of dynamics in its surface hydration water. Here, by selectively probing the dynamics of protein and hydration water using elastic neutron scattering and isotopic labeling, we found that the onset of anharmonicity in the two components around 200 K is decoupled. The one in protein is an intrinsic transition, whose characteristic temperature is independent of the instrumental resolution time, but varies with the biomolecular structure and the amount of hydration, while the one of water is merely a resolution effect.

59 BASIC BIOLOGICAL SCIENCES↗

New camera tube improves ultrasonic inspection system

Electron multiplier, incorporated into the camera tube of an ultrasonic imaging system, improves resolution, effectively shields low level circuits, and provides a high level signal input to the television camera. It is effective for inspection of metallic materials for bonds, voids, and homogeneity.

Berger, H.↗

Resolution Study

Resolution effects on cartographic data using conventional stereoplotters with photographs taken at orbital heights

Loving, H. B.↗

On the abundance of NO2 in the Martian atmosphere

Spectra of Mars and the moon in the spectral region from 4000 to 5000 A were recorded on October 15, 1973. The effective resolution was approximately 4 A. A ratio spectrum (Mars/Moon) was obtained by computer. No absorption features could be detected in the considered region of the Martian spectrum. An upper limit for the total column density of nitrogen dioxide on Mars was derived. It appears on the basis of the investigation that the upper limit reported by Marshall (1964) for the nitrogen dioxide abundance in the Martian atmosphere is completely valid.

Owen, T.↗

A search for the H2 /3, 0/ S1 line in the spectrum of Titan

Results are reported for measurements of the quadrupole S1 line of the (3, 0) absorption band of H2 in spectra of Titan, which were performed at an effective resolution of 0.09 A by scanning with a PEPSIOS spectrometer over a range of 0.85 A centered at the expected position of the investigated line and sampling in 80 contiguous channels. No statistically significant H2 (3, 0) S1 feature is found in the spectra, but a three-sigma upper limit of 3 mA is set for the equivalent width of the S1 line that might be present in a co-added spectrum. It is concluded that these measurements do not provide any evidence for the presence of H2 in the atmosphere of Titan.

Muench, G.↗

Computer-generated maps of lunar composition from gamma-ray data

Processing of some of the gamma-ray data obtained by Apollo 15 and 16 has been accomplished by analyzing count rates in three energy bands. The count rate variations in the three energy bands are due in various degrees to thorium, uranium, potassium, iron and titanium. The mapping which results from the gamma-ray count rates has an effective resolution of about two degrees. Regions of high titanium content in certain maria, the low values of iron in a zone of the central equatorial highland and the relatively low value of iron near Archimedes are noted.

Arnold, J. R.↗

An investigation of a mathematical model for atmospheric absorption spectra

A computer program that calculates absorption spectra for slant paths through the atmosphere is described. The program uses an efficient convolution technique (Romberg integration) to simulate instrument resolution effects. A brief information analysis is performed on a set of calculated spectra to illustrate how such techniques may be used to explore the quality of the information in a spectrum.

Niple, E. R.↗

Remote detection of gases by gas correlation spectroradiometry

The present investigation is concerned with the application of a pressure modulated radiometer (PMR) to the remote sensing of trace amounts of gases in the atmospheres as well as to the direct measurement of upper atmospheric winds. The PMR operates as a gas correlation spectrometer. Compared to conventional gas correlation parameters, it has some advantages which are related to greater versatility and the employment of a simpler method for maintaining electrical/optical balance. The PMR has a high sensitivity in connection with its essentially very high effective resolution. It represents a passive system and emits no radiation. A PMR is flown on Nimbus 6 which was launched in 1975. The instrument has also been used on the Nimbus 7 satellite and the Tiros N satellite.

Margolis, J. S.↗

Unsupervised Classification of Global Radar Units on Venus

Characterization of the Venusian surface in terms of its radar properties was accomplished by application of an unsupervised, linear discriminant algorithm to two Pioneer-Venus (PV) Orbiter radar data sets: the RMS-slope (surface roughness) and reflectivity. Both databases were spatially filtered to the same effective resolution of 100 km prior to classification. A recent supervised classification study using these data was based on presupposed morphologic significance of selected data ranges. The knowledge of both Venusian geology and the geologic significance of the radar data is so limited that the data warrant a more unsupervised approach; for this study a linear discriminant classifier was chosen. This approach is purely statistical, thereby removing any observer bias. Statistical significance of the resulting clusters was evaluated by an ancillary program in which an F test utilizing the Mahalanobis' distance.

Kozak, R. C.↗

Experimental philosophy leading to a small scale digital data base of the conterminous United States for designing experiments with remotely sensed data

Research using satellite remotely sensed data, even within any single scientific discipline, often lacked a unifying principle or strategy with which to plan or integrate studies conducted over an area so large that exhaustive examination is infeasible, e.g., the U.S.A. However, such a series of studies would seem to be at the heart of what makes satellite remote sensing unique, that is the ability to select for study from among remotely sensed data sets distributed widely over the U.S., over time, where the resources do not exist to examine all of them. Using this philosophical underpinning and the concept of a unifying principle, an operational procedure for developing a sampling strategy and formal testable hypotheses was constructed. The procedure is applicable across disciplines, when the investigator restates the research question in symbolic form, i.e., quantifies it. The procedure is set within the statistical framework of general linear models. The dependent variable is any arbitrary function of remotely sensed data and the independent variables are values or levels of factors which represent regional climatic conditions and/or properties of the Earth's surface. These factors are operationally defined as maps from the U.S. National Atlas (U.S.G.S., 1970). Eighty-five maps from the National Atlas, representing climatic and surface attributes, were automated by point counting at an effective resolution of one observation every 17.6 km (11 miles) yielding 22,505 observations per map. The maps were registered to one another in a two step procedure producing a coarse, then fine scale registration. After registration, the maps were iteratively checked for errors using manual and automated procedures. The error free maps were annotated with identification and legend information and then stored as card images, one map to a file. A sampling design will be accomplished through a regionalization analysis of the National Atlas data base (presently being conducted). From this analysis a map of homogeneous regions of the U.S.A. will be created and samples (LANDSAT scenes) assigned by region.

Labovitz, M. L.↗

Numerical advection by conservation of second-order moments

A new, accurate, and nondiffusive method for three-dimensional advection of trace species is presented. The method preserves tracer structures by conserving the second-order moments of the spatial distribution of tracer during advection. Upstream transport and second-order tracer distribution are described, and the moments of the tracer distribution about the center of a grid box are formally defined and related to the polynomial distribution. Formulas are presented which describe how the moments of a grid box are decomposed into a unique set of moments centered about each subbox and how they are reassembled into new grid boxes. A one-dimensional example if tracer transport is given, and limits necessary to maintain positive tracer concentrations are derived. The accuracy and stability of this method are analytically examined, and numerical experiments testing the effective resolution are presented. The method is compared with other methods for numerical advection of tracers.

Prather, M. J.↗

Characteristics, distribution and geologic/terrain associations of small dome-like hills on Venus

Approximately 22,000 small dome-like hills were recognized on the northern 20 percent of the surface of Venus imaged by Verera 15/16. These features were described as generally circular in planimetric outline, with a range in basal diameter from the effective resolution of the Venera images (1 to 2 km) up to 20 km. The General Characteristics, Dome Distribution and Terrain Unit and Geologic Feature Associations are discussed.

Aubele, J. C.↗

A joint program with Japanese investigators to map carbon 2 line emission from the galaxy

A large portion of the inner galactic plane has been mapped in the far-infrared (C II) line using a balloon-borne survey instrument. Complete coverage is reported from 25 degrees north to 80 degrees south of the galactic center and extending a few degrees on each side of the plane. Effective resolution is 14.1 acrmin (FWHM) and contour levels begin at 2 E -5 ergs/(s x sq. cm x ster). When compared with 100 micron dust emission observed by IRAS the (C II) appears well correlated with the dust emission except for a 10 degree region centered on the galactic center where emission from the gas is much weaker than that from the dust.

Low, Frank J.↗

A vision architecture for the extravehicular activity retriever

The Extravehicular Activity Retriever (EVAR) is a robotic device currently being developed by the Automation and Robotics Division at the NASA Johnson Space Center to support activities in the neighborhood of the Space Shuttle or Space Station Freedom. As the name implies, the Retriever's primary function will be to provide the capability to retrieve tools, equipment or other objects which have become detached from the spacecraft, but it will also be able to rescue a crew member who may have become inadvertently de-tethered. Later goals will include cooperative operations between a crew member and the Retriever such as fetching a tool that is required for servicing or maintenance operations. This report documents a preliminary design for a Vision System Planner (VSP) for the EVAR that is capable of achieving visual objectives provided to it by a high level task planner. Typical commands which the task planner might issue to the VSP relate to object recognition, object location determination, and obstacle detection. Upon receiving a command from the task planner, the VSP then plans a sequence of actions to achieve the specified objective using a model-based reasoning approach. This sequence may involve choosing an appropriate sensor, selecting an algorithm to process the data, reorienting the sensor, adjusting the effective resolution of the image using lens zooming capability, and/or requesting the task planner to reposition the EVAR to obtain a different view of the object. An initial version of the Vision System Planner which realizes the above capabilities using simulated images has been implemented and tested. The remaining sections describe the architecture and capabilities of the VSP and its relationship to the high level task planner. In addition, typical plans that are generated to achieve visual goals for various scenarios will be discussed. Specific topics to be addressed will include object search strategies, repositioning of the EVAR to improve the quality of information obtained from the sensors, complementary usage of the sensors and redundant capabilities.

Magee, Michael↗

A vision system planner for increasing the autonomy of the Extravehicular Activity Helper/Retriever

The Extravehicular Activity Retriever (EVAR) is a robotic device currently being developed by the Automation and Robotics Division at the NASA Johnson Space Center to support activities in the neighborhood of the Space Shuttle or Space Station Freedom. As the name implies, the Retriever's primary function will be to provide the capability to retrieve tools and equipment or other objects which have become detached from the spacecraft, but it will also be able to rescue a crew member who may have become inadvertently de-tethered. Later goals will include cooperative operations between a crew member and the Retriever such as fetching a tool that is required for servicing or maintenance operations. This paper documents a preliminary design for a Vision System Planner (VSP) for the EVAR that is capable of achieving visual objectives provided to it by a high level task planner. Typical commands which the task planner might issue to the VSP relate to object recognition, object location determination, and obstacle detection. Upon receiving a command from the task planner, the VSP then plans a sequence of actions to achieve the specified objective using a model-based reasoning approach. This sequence may involve choosing an appropriate sensor, selecting an algorithm to process the data, reorienting the sensor, adjusting the effective resolution of the image using lens zooming capability, and/or requesting the task planner to reposition the EVAR to obtain a different view of the object. An initial version of the Vision System Planner which realizes the above capabilities using simulated images has been implemented and tested. The remaining sections describe the architecture and capabilities of the VSP and its relationship to the high level task planner. In addition, typical plans that are generated to achieve visual goals for various scenarios are discussed. Specific topics to be addressed will include object search strategies, repositioning of the EVAR to improve the quality of information obtained from the sensors, and complementary usage of the sensors and redundant capabilities.

Magee, Michael↗