Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “disability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

MEMS CLOSED CHAMBER HEAT ENGINE AND ELECTRIC GENERATOR

A heat engine, preferably combined with an electric generator, and advantageously implemented using micro-electromechanical system (MEMS) technologies as an array of one or more individual heat engine/generators. The heat engine is based on a closed chamber containing a motive medium, preferably a gas; means for alternately enabling and disabling transfer of thermal energy from a heat source to the motive medium; and at least one movable side of the chamber that moves in response to thermally-induced expansion and contraction of the motive medium, thereby converting thermal energy to oscillating movement. The electrical generator is combined with the heat engine to utilize movement of the movable side to convert mechanical work to electrical energy, preferably using electrostatic interaction in a generator capacitor. Preferably at least one heat transfer side of the chamber is placed alternately into and out of contact with the heat source by a motion capacitor, thereby alternately enabling and disabling conductive transfer of heat to the motive medium.

Landis, Geoffrey A.↗

Pseudorandom Switching for Adding Radar to the AFF Sensor

A document describes the proposed addition of a radar function to the Autonomous Formation Flying Sensor, making possible coarse relative-position control to prevent collisions in the event of failure of one of the spacecraft. According to the proposal, in addition to tracking GPS-like one-way ranging signals transmitted by the other normally functioning spacecraft, each spacecraft could simultaneously track the reflection of its own ranging signal from a disabled, non-transmitting spacecraft. From the round-trip travel time, the approximate distance to the disabled spacecraft could be estimated. To prevent jamming of the receiver by the transmitter on the same spacecraft, the receiver would be switched off during transmission.

Tien, Jeffrey↗

NASA Electronic Parts and Packaging (NEPP) Program

Recent Findings from Audits, New Technology Data Reviews a) Disabled Chip Burn-ins A recent audit for a QML device discovered that the chip was disabled during the static burn-in, thus it was not drawing any current. Recommendation: For new SMDs add a statement within the burn-in paragraphs stating that the parts shall be kept in their enabled state during the burn-in. b) Class Q 160-hr/125oC Burn-in This is being interpreted as a static burn-in (even for CMOS technology). Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. c) At Frequency (Dynamic) Burn-ins Test equipment limitation is being cited for not doing burn-ins at the application frequency. Recommendation: The burn-in task group to discuss and provide guidance. When the SMD says that the part can be used at 200 MHz, then doing burn-in at 6 MHz (cited as burn-in equipment limitation frequency) is not going to be meaningful! d) Two Static Burn-ins Some manufacturers are doing electrical testing between the two static burn-ins, whereas others do electricals after completing both static burn-ins. Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. e) Thermal Imaging For a device with hot spots, the thermal resistance, junction-to-case, would be much higher than the guidelines given in MIL-STD-1835. One of the suppliers used thermal imaging to find hot spots on the die. Recommendation: Assign a task group to evaluate the effectiveness of thermal imaging at the product development stage.

Class Y↗

Testing of the Lunar Reconnaissance Orbiter Attitude Control System Re-Design Without a Gyro

The Lunar Reconnaissance Orbiter (LRO) was launched in 2009 and, with itsseven science instruments, has made numerous contributions to our understandingof the moon. LRO is in an elliptical, polar lunar orbit and nominally maintainsa nadir orientation. There are frequent slews off nadir to observe various sciencetargets. LRO attitude control system (ACS) has two star trackers and a gyro forattitude estimation in an extended Kalman filter (EKF) and four reaction wheelsused in a proportional-integral-derivative (PID) controller. LRO is equipped withthrusters for orbit adjustments and momentum management. In early 2018, thegyro was powered off following a fairly rapid decline in the laser intensity on theX axis. Without the gyro, the EKF has been disabled. Attitude is provided by asingle star tracker and a coarse rate estimate is computed by a back differencingof the star tracker quaternions. Slews have also been disabled. A new rate estimationapproach makes use of a complementary filter, combining the quaterniondifferentiated rates and the integrated PID limited control torque (with reactionwheel drag and feedforward torque removed). The filtered rate estimate replacesthe MIMU rate in the EKF, resulting in minimal flight software changes. The paperwill cover the preparation and testing of the new gyroless algorithm, both inground simulations and inflight.

Halverson, Julie↗

Air Traffic Management TestBed: Messaging Performance

The Air Traffic Management (ATM) TestBed is an air traffic management modeling and simulation platform and framework developed by the National Aeronautics and Space Administration (NASA) to help design, configure, integrate, run, and monitor air traffic simulations. The communication middleware, implemented in the TestBed framework layer, is a core feature for data message exchange. The feature provides an abstraction layer called Messaging Support to allow switching one middleware to another without a need to rebuild the simulation components. Messaging performance such as latencies, run durations, and throughputs are important factors. Low latencies can produce accurate results in high-fidelity and visualization models. Short run durations are preferred because better run efficiency can be achieved. High throughputs allow more runs to be executed concurrently. This technical memorandum studies and compares the messaging performance by running a full-day, fast-time simulation using three communication middleware as well as tweaking the default communication middleware settings used by the TestBed. Results indicate that the messaging performance could be improved by disabling either compression or persistence settings, while the run duration and throughput could be further improved by disabling both settings with a tradeoff of the message latencies increased by a factor of ten.

Chok Fung Lai↗

Diversity and Inclusion in Spacecraft Science Teams: What Do We Know and What Can We Do About It?

Introduction: Not only does the planetary science community lack diversity [1-3], the subset of the community that participates on spacecraft science team is even less diverse than the community as a whole [1, 4]. Results of 2020 Workforce Survey: Previous studies of the diversity of members of spacecraft science teams made incorrect assumptions about the nature of the data before collecting the data. Those analyses assumed a binary gender and ignored the existence of planetary scientists who are neither men nor women [4-6]. We present here results where demographic data was collected without assumptions; each individual surveyed supplied their own answers to demographic questions. The April 2020 survey of Planetary Scientists, which was conducted by the Statistical Research Center of the American Institute of Physics (AIP) and funded by the American Astronomical Society (AAS)’s Division of Planetary Science (DPS) asked participants their gender with 4 possible responses: Woman, Man, Another identify (please specify if you wish), and Prefer not to answer. 32% of respondents chose Woman, 67% chose Man and 1% chose Another gender identity [1]. The survey also asked demographic questions on race, ethnicity, LGBTQ+ identity, and disability. For a full list of questions, see https://dps.aas.org/sites/dps.aas.org/files/reports/2020/survey2020_questionnaire.pdf. In addition to demographic questions, the 2020 Workforce survey asked how many times respondents had been involved in Mission proposals as a Principal Investigator (PI) and, separately, as a Co-Investigator (CoI) [1]. Answers to questions about mission involvement were correlated with answers to demographic questions and the results show that members of historically underrepresented groups (non-white scientists, women, members of the LGBTQ+ community, and disabled scientists) were less likely to be involved in spacecraft mission proposals than were members of historically overrepresented groups [1]. The figures below show the correlated responses for four different axes of underrepresentation [1]. Note that while the figure on gender shows only Women and Men (due to the small percentage of folks answering “Another gender”), non-binary respondents are included in the LGBTQ+ community figure. Conclusion: Being part of a spacecraft science team is a goal for many planetary scientists. With it comes brand new data, more stable funding, and a sense of awe and exploration. It can lead to a cascade of opportunities from conference and public presentations, to membership in subsequent mission teams, and prestige in the community [4]. As a result, participation in spacecraft teams can be used a measure of success within the field. From the survey results, we see that members of historically excluded groups, even after they have overcome barriers to participating in the field, are still experiencing barriers to success within the field itself. Why?: The diminishing percentage of members of underrepresented groups as a career progresses has been referred to as a “leaky pipeline”. However, this fails to adequately capture the experiences of the members of these underrepresented groups as it implies a passive process. In order to capture the active processes (bias, discrimination, harassment, and other exclusionary behaviors) that contribute to low retention in the workforce, the term “Hostile Obstacle Course” is more useful [7,8]. It is these processes that need to be addressed in order to retain valued members of our community. Moving Forward: In order to broaden participation in planetary science, particularly mission science teams, we need to address conditions that create hostile workplace climates. What can mission teams and other groups do to address these conditions? First, each group/team needs to evaluate their own members to determine what specific barriers exist in their own interactions. One tool to accomplish this would be an anonymous survey designed to understand how team members feel about working within the group. Working with professionals who know how to create and analyze such surveys (often called “climate surveys” when applied to University students, for example) would ensure that the survey meets its goals and does not make assumptions that counter the meaningfulness of the results. Such professionals in EDIA (Equity, Diversity, Inclusion, and Accessibility) and workplace culture can make suggestions for policy changes that would eliminate hostile workplace conditions. Policy changes that are often suggested include instituting professional EDIA training for the team and/or for team leadership, instituting and following a code of conduct [9], including more interactive group activities in group meetings, etc. Training and information on EDIA is available for all members of the planetary science community. The first place to look would be in your University or Institution’s EDIA or human resources offices. Bystander Intervention is often offered as part of other meetings [10]. A newer offering is a Workshop on EDIA for Leaders in Planetary Science led by Julie Rathbun (first author of this abstract) and JA Grier (https://edialps.psi.edu/). This 3-day workshop gives participants the tools they need to enact positive change in their personal and professional spheres. The first workshop was help in November 2022 and another workshop will take place in the late spring 2023 with exact dates to be announced soon.

J. A. Rathbun↗

Common Cause Failures Dominate and Defeat Redundancy

Common cause failures occur when several malfunctions are produced by a single event or process. They are especially damaging when they eliminate an entire set of redundant systems and disable their intended function. Redundancy is used when the individual system failure probability is unacceptably high. Redundancy can improve the overall system failure probability if the failures are independent, but the reliability gain is limited if there are dependent failures having a common cause. No amount of redundancy can reduce the total failure probability below the common cause failure probability. Common cause failures defeat redundancy. Systems with high reliability requirements often use extensive redundancy. These highly redundant systems rarely fail unless all the redundant components providing a particular function fail. Complete failures of such highly redundant systems are then usually common cause failures. Common cause failures are prevalent in highly redundant, high reliability systems. Common cause failures dominate redundancy. Redundant systems may fail due to specification, design, manufacturing, operations, or maintenance problems that disable all the identical redundant systems. Common cause failures typically account for one tenth of all failures. If the failure probability is relatively low and common cause failures are significant, adding more than two or three redundant identical units usually gives little added reliability improvement. Common cause failures can be reduced by using diverse components with different technologies and manufacturers, by separating and shielding subsystems, and by avoiding shared control, power, or location. External events and shared vulnerabilities may still cause common cause failures.

common cause failures↗

Common Cause Failures Dominate and Defeat Redundancy

Common cause failures occur when several malfunctions are produced by a single event or process. They are especially damaging when they eliminate an entire set of redundant systems and disable their intended function. Redundancy is used when the individual system failure probability is unacceptably high. Redundancy can improve the overall system failure probability if the failures are independent, but the reliability gain is limited if there are dependent failures having a common cause. No amount of redundancy can reduce the total failure probability below the common cause failure probability. Common cause failures defeat redundancy. Systems with high reliability requirements often use extensive redundancy. These highly redundant systems rarely fail unless all the redundant components providing a particular function fail. Complete failures of such highly redundant systems are then usually common cause failures. Common cause failures are prevalent in highly redundant, high reliability systems. Common cause failures dominate redundancy. Redundant systems may fail due to specification, design, manufacturing, operations, or maintenance problems that disable all the identical redundant systems. Common cause failures typically account for one tenth of all failures. If the failure probability is relatively low and common cause failures are significant, adding more than two or three redundant identical units usually gives little added reliability improvement. Common cause failures can be reduced by using diverse components with different technologies and manufacturers, by separating and shielding subsystems, and by avoiding shared control, power, or location. External events and shared vulnerabilities may still cause common cause failures.

common cause failures↗

Engine control systems and methods for nitrogen oxide reduction

A fuel control module controls fuel injection of an engine based on a predetermined lean air/fuel ratio. The predetermined lean air/fuel ratio is fuel lean relative to a stoichiometric air/fuel ratio for the fuel. A cylinder control module selectively deactivates opening of intake and exhaust valves of M cylinders of the engine to increase removal of nitrogen oxide (NOx) from exhaust. M is an integer greater than 0 and less than a total number of cylinders of the engine. The fuel control module further: disables fueling of the M cylinders while opening of the intake and exhaust valves of the M cylinders is deactivated; and, while fueling of the M cylinders is disabled and opening of the intake and exhaust valves of the M cylinders is deactivated, controls fuel injection of other cylinders based on a predetermined rich air/fuel ratio that is fuel rich relative to the stoichiometric air/fuel ratio.

42 ENGINEERING↗

Gated truncated readout system

A gated truncated readout system for position sensitive or imaging detectors that improves resolution over traditional readout systems. The readout system includes two or more amplifiers that receive a multichannel output analog data from the detector. Analog gates control circuitry, included in the readout circuit, receives the signals from the amplifiers, determines a fractional value of the sum-integral of the signals, and enables analog gates operation around an area of interest, disabling all other channels where noise dominates the signal value and thereby improving interpolation accuracy of the signals centroid position and the detector resolution. Filtered signals are transmitted to a centroid interpolation signal processing device for computation of the centroid position. As a result disabling all channels where noise dominates the signal value, the gated truncated readout system provides better accuracy improved detector resolution.

Popov, Vladimir↗

Systems Engineering (SE) Approach of Developing A Passive Safety Injection System (PSIS) to Cope with APR1400 Extended Station Black-Out (SBO) Accident Using RELAP5

On 11 March 2011 the power supply and cooling of the three Fukushima Daiichi reactors were disabled by a major earthquake followed by a relatively high tsunami waves. The earthquake damaged the electrical grid which is the normal power supply for the reactors, then the tsunami waves disabled the emergency diesel generators of the Fukushima Daiichi reactors, which left the plant with no alternating current (AC) source. This condition is called 'Station Black-Out'. The reactors were tripped immediately, but due to the nuclear physics phenomena, the reactor cores were still producing thermal power, which is generated by the decay of radioactive fission products in the reactor core, known as decay heat. The decay heat had not been circulated to an external heat sink and eventually the accumulative heat produced in the core led to damage to the reactor cores. After the Fukushima Daiichi accident, Design Extension Condition (DEC) such as total loss of feed water (TLOFW), and prolonged Station Black-Out (SBO) attracted the attention of nuclear experts. The attention focuses on the defense in depth concept, redundancy and sustainability of the systems, and development of the passive safety systems, which rely on natural physics laws. The topic of this paper is to discuss the possibility of attaching a Passive Safety Injection System (PSIS) to the APR1400. The PSIS is a safety system which provides adequate cooling water to the steam generators after the loss of the Auxiliary Feed Water System (AFWS) during an extended SBO accident. The PSIS will be available while the power supply of the plant is being recovered and the active safety systems take over the functionality. The anticipated PSIS will be automatically actuated to enhance the engineered safety feature and to reduce the human errors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Enhancing Autonomous Control of Microreactors Using Multi-Agent Reinforcement Learning

In order for microreactors to be economically competitive, operation costs will need to be minimized through some degree of autonomous control. Previous work has demonstrated the effectiveness of reinforcement learning (RL) for load-following control in a drum-controlled microreactor. This study extends that work by exploring the potential of RL to independently control each of the reactor’s drums. We compare a single-agent RL approach with a multi-agent RL (MARL) framework, testing them for generalization across different load-following power profiles and control timescales, and for robustness in cases of randomly disabled control drums. Since the point kinetics simulation environment used in this study cannot resolve spatial effects, we assume that in the absence of spatially localized disturbances, optimal drum movements should be symmetrical. We demonstrate that single-agent RL is able to achieve accurate performance only when symmetric actions are ignored; otherwise, it fails to train a useful controller. Meanwhile, the MARL framework performs symmetric actions by design and trains a robust, accurate agent, as evidenced by mean absolute errors in power matching of 0.41% for the training power profile, 0.68% for a profile with half the drums disabled, and 0.21% for a profile on a realistic load-following time horizon.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

How Time Inefficient and Uncertain are Paratransit Trips Compared to Car Trips

The Americans with Disabilities Act (ADA) stipulates that paratransit mobility be comparable to public transit. However, with just under 5% of the population relying on public transportation, transit is not a representative benchmark. To highlight this inequality, we compare trip times by paratransit to counterfactual car-based travel. Using 2.5 years of demand data from the Denver Regional Transportation District's Access-a-Ride service, we compare paratransit trip times to counterfactual car-based trips for the same origin-destination pairs, controlling for various trip characteristics. Compared to car travel, the findings indicate high variability and uncertainty associated with paratransit trip times. For the same origin-destination pairs, the mean paratransit trip time is almost twice that of the mean car travel time, with a standard deviation for paratransit trip time fourfold that of the standard deviation for car trip time. For perspective, traveling an average of 10 mi during the 7-8 a.m. morning peak can take about 16 min by car with almost no variability, while that same trip can take an average of 25 min by paratransit, with 5% of trips being outside the 95% confidence interval and thus unpredictable. Paratransit trip time inefficiency tends to be particularly worse for females; older adults; those making trips between 9 and 11 a.m.; cash-paying customers; those making shorter trips; and those traveling during inclement weather, including cold temperatures. These findings suggest a need to re-assess using public transit as a benchmark for paratransit supply as regulated by the ADA.

accessible transportation and mobility↗

Bacillus thuringiensisCry1Da_7 and Cry1B.868 Protein Interactions with Novel Receptors Allow Control of Resistant Fall Armyworms,Spodoptera frugiperda(J.E. Smith)

Two new modified Bacillus thuringiensis (Bt) proteins, Cry1Da_7 and Cry1B.868, with activity against fall armyworms (FAW), Spodoptera frugiperda (J.E. Smith), were evaluated for their potential to bind new insect receptors compared to proteins currently deployed as plant-incorporated protectants (PIPs) in row crops. Results from resistant insect bioassays, disabled insecticidal protein (DIP) bioassays, and cell-based assays using insect cells expressing individual receptors demonstrate that receptor utilizations of the newly modified Cry1Da_7 and Cry1B.868 proteins are distinct from each other and from those of commercially available Bt proteins such as Cry1F, Cry1A.105, Cry2Ab, and Vip3A. Accordingly, these two proteins target different insect proteins in FAW midgut cells and when pyramided together should provide durability in the field against this economically important pest.

59 BASIC BIOLOGICAL SCIENCES↗

Automated Vehicle Policy and Regulation: A State Perspective Workshop: Summary

A workshop held on May 18, 2016, at the University of Maryland focused on key principles that should govern state policy decisions intended to ensure the safe operation of autonomous vehicles (AVs). The patchwork approach taken by early state adopters had primarily addressed only testing of these vehicles. As uncertainties in technology and business models play out, and in the absence of more suitable policies and regulations, states are relying on laws created for conventional vehicles to govern AV operations. The workshop addressed these challenges with three panel discussions that examined the underpinnings of policy development, factors affecting policy decisions, and the ultimate impact of AVs in a number of areas, including economic competitiveness; quality of mobility, particularly for disabled community; and energy use and emissions.

25 ENERGY STORAGE↗

Outcome analysis of individualized vestibular rehabilitation protocols

OBJECTIVE: To determine the outcome of vestibular rehabilitation protocols in subjects with peripheral vestibular disorders compared with normal and abnormal control subjects. STUDY DESIGN: Prospective study using repeated measure, matched control design. Subjects were solicited consecutively according to these criteria: vestibular disorder subjects who had abnormal results of computerized dynamic posturography (CDP) sensory organization tests (SOTs) 5 and 6 and underwent rehabilitation; vestibular disorder subjects who had abnormal results of SOTs 5 and 6 and did not undergo rehabilitation; and normal subjects (normal SOTs). SETTING: Tertiary neurotology clinic. SUBJECTS: Men and women over age 18 with chronic vestibular disorders and chief complaints of unsteadiness, imbalance, and/or motion intolerance, and normal subjects. INTERVENTIONS: Pre- and post-rehabilitation assessment included CDP, vestibular disability, and activities of daily living questionnaires. Individualized rehabilitation plans were designed and implemented to address the subject's specific complaints and functional deficits. Supervised sessions were held at weekly intervals, and self-administered programs were devised for daily home use. MAIN OUTCOME MEASURES: CDP composite and SOT scores, number of falls on CDP, and self-assessment questionnaire results. RESULTS: Subjects who underwent rehabilitation (Group A) showed statistically significant improvements in SOTs, overall composite score, and reduction in falls compared with abnormal (Group B) control groups. Group A's performances after rehabilitation were not significantly different from those of normal subjects (Group C) in SOTs 3 through 6, and close to normal on SOTs 1 and 2. Subjects in Group A also reported statistically significant symptomatic improvement. CONCLUSIONS: Outcome measures of vestibular protocol physical therapy confirmed objective and subjective improvement in subjects with chronic peripheral vestibular disorders. These findings support results reported by other investigators.

NASA Discipline Neuroscience↗

A Few Examples of Spacecraft Anomalies Attributed to Transient Voltages and Currents Issues

It is easy to address voltage and current transient related issues when the hardware in question or similar type of hardware is always available to you and when such issues are deterministic in nature. Unexpected or unforeseen transient related problems are not always a challenge but become a severe concern when a unique piece of the hardware, which developed the problem, is in space; as it is with all satellites. This paper addresses in a qualitative manner, a few examples of voltage and current events of transient origin which disabled space hardware.

transient origin↗