Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “digital quantum simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Gluon field digitization via group space decimation for quantum computers

Efficient digitization is required for quantum simulations of gauge theories. Schemes based on discrete subgroups use fewer qubits at the cost of systematic errors. We systematize this approach by deriving a single plaquette action for approximating general continuous gauge groups through integrating out field fluctuations. This provides insight into the effectiveness of these approximations, and how they could be improved. We accompany the scheme by simulations of pure gauge over the largest discrete subgroup of SU(3) up to the third order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Emulation of complex open quantum systems using superconducting qubits

With quantum computers being out of reach for now, quantum simulators are alternative devices for efficient and accurate simulation of problems that are challenging to tackle using conventional computers. Quantum simulators are classified into analog and digital, with the possibility of constructing “hybrid” simulators by combining both techniques. Here we focus on analog quantum simulators of open quantum systems and address the limit that they can beat classical computers. In particular, as an example, we discuss simulation of the chlorosome light-harvesting antenna from green sulfur bacteria with over 250 phonon modes coupled to each electronic state. Furthermore, we propose physical setups that can be used to reproduce the quantum dynamics of a standard and multiple-mode Holstein model. The proposed scheme is based on currently available technology of superconducting circuits consist of flux qubits and quantum oscillators.

97 MATHEMATICS AND COMPUTING↗

Success of digital adiabatic simulation with large Trotter step

The simulation of adiabatic evolution has deep connections with adiabatic quantum computation, the quantum approximate optimization algorithm, and adiabatic state preparation. Here we address the error analysis problem in quantum simulation of adiabatic process using Trotter formulas. Here we show that with additional conditions, the circuit depth can be linear in simulation time T. The improvement comes from the observation that the fidelity error here can't be estimated by the norm distance between evolution operators. This phenomenon is termed the robustness of discretization in digital adiabatic simulation. It can be explained in three steps, from analytical and numerical evidence: (1) The fidelity error should be estimated by applying adiabatic theorem on the effective Hamiltonian instead. (2) Because of the specialty of Riemann-Lebesgue lemma, most adiabatic process is naturally robust against discretization. (3) As the Trotter step gets larger, the spectral gap of effective Hamiltonian tends to close, which results in the failure of digital adiabatic simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Destructive Error Interference in Product-Formula Lattice Simulation

Quantum computers can efficiently simulate the dynamics of quantum systems. Here, we study the cost of digitally simulating the dynamics of several physically relevant systems using the first-order product-formula algorithm. We show that the errors from different Trotterization steps in the algorithm can interfere destructively, yielding a much smaller error than previously estimated. In particular, we prove that the total error in simulating a nearest-neighbor interacting system of n sites for time t using the first-order product formula with r time slices is O ( n t / r + n t 3 / r 2 ) when n t 2 / r is less than a small constant. Given an error tolerance ϵ , the error bound yields an estimate of max { O ( n 2 t / ϵ ) , O ( n 2 t 3 / 2 / ϵ 1 / 2 ) } for the total gate count of the simulation. The estimate is tighter than previous bounds and matches the empirical performance observed in Childs et al. [ Proc. Natl. Acad. Sci. U.S.A. 115 , 9456 (2018) ]. We also provide numerical evidence for potential improvements and conjecture an even tighter estimate for the gate count.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Entanglement-based quantum digital signatures over a deployed campus network

The quantum digital signature protocol offers a replacement for most aspects of public-key digital signatures ubiquitous in today’s digital world. A major advantage of a quantum-digital-signatures protocol is that it can have information-theoretic security, whereas public-key cryptography cannot. Here we demonstrate and characterize hardware to implement entanglement-based quantum digital signatures over our campus network. Over 25 hours, we collect measurements on our campus network, where we measure sufficiently low quantum bit error rates (<5% in most cases) which in principle enable quantum digital signatures at over 50 km as shown through rigorous simulation accompanied by a noise model developed specifically for our implementation. These results show quantum digital signatures can be successfully employed over deployed fiber. Moreover, our reported method provides great flexibility in the number of users, but with reduced entanglement rate per user. Finally, while the current implementation of our entanglement-based approach has a low signature rate, feasible upgrades would significantly increase the signature rate.

97 MATHEMATICS AND COMPUTING↗

Improved Accuracy for Trotter Simulations Using Chebyshev Interpolation

Quantum metrology allows for measuring properties of a quantum system at the optimal Heisenberg limit. However, when the relevant quantum states are prepared using digital Hamiltonian simulation, the accrued algorithmic errors will cause deviations from this fundamental limit. In this work, we show how algorithmic errors due to Trotterized time evolution can be mitigated through the use of standard polynomial interpolation techniques. Our approach is to extrapolate to zero Trotter step size, akin to zero-noise extrapolation techniques for mitigating hardware errors. We perform a rigorous error analysis of the interpolation approach for estimating eigenvalues and time-evolved expectation values, and show that the Heisenberg limit is achieved up to polylogarithmic factors in the error. Our work suggests that accuracies approaching those of state-of-the-art simulation algorithms may be achieved using Trotter and classical resources alone for a number of relevant algorithmic tasks.

Rendon, Gumaro↗

Digitization and subduction of S U ( N ) gauge theories

The simulation of lattice gauge theories on quantum computers necessitates digitizing gauge fields. One approach involves substituting the continuous gauge group with a discrete subgroup, but the implications of this approximation still need to be clarified. To gain insights, we investigate the subduction of S U ( 2 ) and S U ( 3 ) to discrete crystal-like subgroups. Using classical lattice calculations, we show that subduction offers valuable information based on subduced direct sums, helping us identify additional terms to incorporate into the lattice action that can mitigate the effects of digitization. Furthermore, we compute the static potentials of all irreducible representations of Σ ( 360 × 3 ) at a fixed lattice spacing. Our results reveal a percent-level agreement with the Casimir scaling of S U ( 3 ) for irreducible representations that subduce to a single Σ ( 360 × 3 ) irreducible representation. This provides a diagnostic measure of approximation quality, as some irreducible representations closely match the expected results while others exhibit significant deviations. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum error thresholds for gauge-redundant digitizations of lattice field theories

In the quantum simulation of lattice gauge theories, gauge symmetry can be either fixed or encoded as a redundancy of the Hilbert space. While gauge-fixing reduces the number of qubits, keeping the gauge redundancy can provide code space to mitigate and correct quantum errors by checking and restoring Gauss’s law. In this work, we consider the correctable errors for generic finite gauge groups and design the quantum circuits to detect and correct them. We calculate the error thresholds below which the gauge-redundant digitization with Gauss’s law error correction has better fidelity than the gauge-fixed digitization involving only gauge-invariant states. Our results provide guidance for fault-tolerant quantum simulations of lattice gauge theories. Published by the American Physical Society 2024

97 MATHEMATICS AND COMPUTING↗

Single-particle digitization strategy for quantum computation of a Φ 4 scalar field theory

Motivated by the parton picture of high-energy quantum chromodynamics, we develop a single-particle digitization strategy for the efficient quantum simulation of relativistic scattering processes in a d + 1-dimensional scalar Φ 4 field theory. Here, we work out quantum algorithms for initial state preparation, time evolution, and final state measurements. We outline a nonperturbative renormalization strategy in this single-particle framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Programmable simulations of molecules and materials with reconfigurable quantum processors

Simulations of quantum chemistry and quantum materials are believed to be among the most important applications of quantum information processors. However, realizing practical quantum advantage for such problems is challenging because of the prohibitive computational cost of programming typical problems into quantum hardware. Here we introduce a simulation framework for strongly correlated quantum systems represented by model spin Hamiltonians that uses reconfigurable qubit architectures to simulate real-time dynamics in a programmable way. Our approach also introduces an algorithm for extracting chemically relevant spectral properties via classical co-processing of quantum measurement results. We develop a digital–analogue simulation toolbox for efficient Hamiltonian time evolution using digital Floquet engineering and hardware-optimized multi-qubit operations to accurately realize complex spin–spin interactions. As an example, we propose an implementation based on Rydberg atom arrays. In addition, we show how detailed spectral information can be extracted from the dynamics through snapshot measurements and single-ancilla control, enabling the evaluation of excitation energies and finite-temperature susceptibilities from a single dataset. To illustrate the approach, we show how to use the method to compute key properties of a polynuclear transition-metal catalyst and two-dimensional magnetic materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Simulation of dose reduction in tomosynthesis

Purpose: Methods for simulating dose reduction are valuable tools in the work of optimizing radiographic examinations. Using such methods, clinical images can be simulated to have been collected at other, lower, dose levels without the need of additional patient exposure. A recent technology introduced to healthcare that needs optimization is tomosynthesis, where a number of low-dose projection images collected at different angles is used to reconstruct section images of an imaged object. The aim of the present work was to develop a method of simulating dose reduction for digital radiographic systems, suitable for tomosynthesis. Methods: The developed method uses information about the noise power spectrum (NPS) at the original dose level and the simulated dose level to create a noise image that is added to the original image to produce an image that has the same noise properties as an image actually collected at the simulated dose level. As the detective quantum efficiency (DQE) of digital detectors operating at the low dose levels used for tomosynthesis may show a strong dependency on the dose level, it is important that a method for simulating dose reduction for tomosynthesis takes this dependency into account. By applying an experimentally determined relationship between pixel mean and pixel variance, variations in both dose and DQE in relevant dose ranges are taken into account. Results: The developed method was tested on a chest tomosynthesis system and was shown to produce NPS of simulated dose-reduced projection images that agreed well with the NPS of images actually collected at the simulated dose level. The simulated dose reduction method was also applied to tomosynthesis examinations of an anthropomorphic chest phantom, and the obtained noise in the reconstructed section images was very similar to that of an examination actually performed at the simulated dose level. Conclusions: In conclusion, the present article describes a method for simulating dose reduction suitable for tomosynthesis. However, the method applies equally well to any digital radiographic system, although the benefits of correcting for DQE variations may be smaller.

61 RADIATION PROTECTION AND DOSIMETRY↗

Digitizing gauge fields: Lattice Monte Carlo results for future quantum computers

We report that in the near-future noisy intermediate-scale quantum (NISQ) era of quantum computing technology, applications of quantum computing will be limited to calculations of very modest scales in terms of the number of qubits used. The need to represent numeric quantities using limited resources leads to digitization errors which must be taken into account. As a first step towards quantum simulations of realistic high-energy physics problems, we explore classically the effects of digitizing elements of the $\mathrm{SU}(2)$ gauge group to a finite set. We consider several methods for digitizing the group, finding the best performance from an action-preserving projection onto a mesh. Working in (3+1) dimensions, we find that using $\sim 7$ (qu)bits to represent each $\mathrm{SU}(2)$ gauge link induces a digitization error on the order of $10\%$ in short-distance observables and $2\%$ in long-distance observables. Promisingly, our results indicate that each $\mathrm{SU}(2)$ gauge link can be represented by $\mathcal{O}(10)$ (qu)bits, from which we estimate that a $16^3$ $\mathrm{SU}(2)$ lattice could be simulated with no more than $\mathcal{O}(10^5)$ (qu)bits. Lastly, our results on digitization are also of interest as a form of lossy compression that could be used in high-performance classical computing to alleviate communications bottlenecks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solving independent set problems with photonic quantum circuits

An independent set (IS) is a set of vertices in a graph such that no edge connects any two vertices. In adiabatic quantum computation [E. Farhi, et al ., Science 292, 472–475 (2001); A. Das, B. K. Chakrabarti, Rev. Mod. Phys. 80, 1061–1081 (2008)], a given graph G ( V , E ) can be naturally mapped onto a many-body Hamiltonian H IS G ( V , E ) , with edges E being the two-body interactions between adjacent vertices V . Thus, solving the IS problem is equivalent to finding all the computational basis ground states of H IS G ( V , E ) . Very recently, non-Abelian adiabatic mixing (NAAM) has been proposed to address this task, exploiting an emergent non-Abelian gauge symmetry of H IS G ( V , E ) [B. Wu, H. Yu, F. Wilczek, Phys. Rev. A 101, 012318 (2020)]. Here, we solve a representative IS problem G ( 8 , 7 ) by simulating the NAAM digitally using a linear optical quantum network, consisting of three C-Phase gates, four deterministic two-qubit gate arrays (DGA), and ten single rotation gates. The maximum IS has been successfully identified with sufficient Trotterization steps and a carefully chosen evolution path. Remarkably, we find IS with a total probability of 0.875(16), among which the nontrivial ones have a considerable weight of about 31.4%. Our experiment demonstrates the potential advantage of NAAM for solving IS-equivalent problems.

Science & Technology - Other Topics↗

Minimally entangled state preparation of localized wave functions on quantum computers

Initializing a single site of a lattice scalar field theory into an arbitrary state with support throughout the quantum register requires $O(2^{nQ})$ entangling gates on a quantum computer with $n_Q$ qubits per site. It is conceivable that instead initializing to functions that are good approximations to states may have utility in reducing the number of required entangling gates. In the case of a single site of a noninteracting scalar field theory, initializing to a symmetric exponential wave function requires $n_Q – 1$ entangling gates, the minimal number necessary to create an entangled state of all $n_Q$ qubits. This is compared with the $2^{nQ – 1} + n_Q – 3 + δ_{nQ, 1}$ required for a symmetric Gaussian wave function. In this work, we explore the initialization of one-site $(n_Q = 4)$, two-site $(n_Q = 3)$, and three-site ( n Q = 3 ) noninteracting scalar field theories with symmetric exponential wave functions using IBM's quantum simulators and quantum devices (Poughkeepsie and Tokyo). With the digitizations attainable with $n_Q = 3,4$, these tensor-product wave functions are found to have large overlap with a Gaussian wave function and provide a suitable low-noise initialization for improvement and Somma inflation. Further, in performing these simulations, we have employed a workflow that interleaves calibrations to mitigate systematic errors in production. The calibrations allow tolerance cuts on gate performance including the fidelity of the symmetrizing Hadamard gate, both in vacuum $(|\textbf{0}\gg^{\bigotimes nQ})$ and in medium ($n_Q –1$ qubits initialized to an exponential function). The results obtained in this work are relevant to systems beyond scalar field theories, such as the deuteron radial wave function, two- and three-dimensional Cartesian-space wave functions, and nonrelativistic multinucleon systems built on a localized eigenbasis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-fidelity parallel entangling gates on a neutral-atom quantum computer

The ability to perform entangling quantum operations with low error rates in a scalable fashion is a central element of useful quantum information processing. Neutral-atom arrays have recently emerged as a promising quantum computing platform, featuring coherent control over hundreds of qubits and any-to-any gate connectivity in a flexible, dynamically reconfigurable architecture. The main outstanding challenge has been to reduce errors in entangling operations mediated through Rydberg interactions. Here we report the realization of two-qubit entangling gates with 99.5% fidelity on up to 60 atoms in parallel, surpassing the surface-code threshold for error correction. Our method uses fast, single-pulse gates based on optimal control, atomic dark states to reduce scattering and improvements to Rydberg excitation and atom cooling. We benchmark fidelity using several methods based on repeated gate applications, characterize the physical error sources and outline future improvements. Finally, we generalize our method to design entangling gates involving a higher number of qubits, which we demonstrate by realizing low-error three-qubit gates. By enabling high-fidelity operation in a scalable, highly connected system, these advances lay the groundwork for large-scale implementation of quantum algorithms, error-corrected circuits and digital simulations.

97 MATHEMATICS AND COMPUTING↗

Robustness of Gauge Digitization to Quantum Noise

Quantum noise limits the use of quantum memory in high energy physics simulations. In particular, it breaks the gauge symmetry of stored quantum states. We examine this effect for abelian and nonabelian theories and demonstrate that optimizing the digitization of gauge theories to quantum memory to account for noise channels can extend the lifetime before complete loss of gauge symmetry by $2-10\times$ over some other digitizations. These constructions also allow for quantum error correction to integrate the symmetries of quantum fields and prioritize the largest gauge violations.

Gustafson, Erik J.↗

Realizing symmetry-protected topological phases in a spin-1/2 chain with next-nearest-neighbor hopping on superconducting qubits

Quantum simulation on near-term quantum hardware is a topic of intense interest. The preparation of novel quantum states of matter provides a quantitative assessment of the capabilities of near-term digital quantum computers to implement circuits with structure of relevance to quantum simulation. Here, we conduct a benchmark study by realizing symmetry-protected topological (SPT) phases of a spin-1/2 Hamiltonian with next-nearest-neighbor hopping on up to 11 qubits on a programmable superconducting quantum processor using adiabatic state preparation. Using recompilation techniques to reduce the gate count to around 50 two-qubit gates, we observe clear signatures of the two distinct SPT phases, such as excitations localized to specific edges and finite string-order parameters. Finally, we identify a parasitic phase associated with the two-qubit gate as the dominant imperfection that limits the depth of the circuits, indicating a research topic of interest for future hardware development.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum simulation of nonequilibrium dynamics and thermalization in the Schwinger model

In this work, we present simulations of nonequilibrium dynamics of quantum field theories on digital quantum computers. As a representative example, we consider the Schwinger model, a (1+1)-dimensional U(1) gauge theory, coupled through a Yukawa-type interaction to a thermal environment described by a scalar field theory. We use the Hamiltonian formulation of the Schwinger model discretized on a spatial lattice. With the thermal scalar fields traced out, the Schwinger model can be treated as an open quantum system and its real-time dynamics are governed by a Lindblad equation in the Markovian limit. The interaction with the environment ultimately drives the system to thermal equilibrium. In the quantum Brownian motion limit, the Lindblad equation is related to a field theoretical Caldeira-Leggett equation. By using the Stinespring dilation theorem with ancillary qubits, we perform studies of both the nonequilibrium dynamics and the preparation of a thermal state in the Schwinger model using IBM's simulator and quantum devices. The real-time dynamics of field theories as open quantum systems and the thermal state preparation studied here are relevant for a variety of applications in nuclear and particle physics, quantum information and cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗