Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defects in solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Direct Imaging of Asymmetric Interfaces and Electrostatic Potentials inside a Hafnia–Zirconia Ferroelectric Nanocapacitor

In hafnia-based thin-film ferroelectric devices, chemical phenomena during growth and processing, such as oxygen vacancy formation and interfacial reactions, appear to strongly affect device performance. However, the correlation between the structure, chemistry, and electrical potentials at the nanoscale in these devices is not fully known, making it difficult to understand their influence on device properties. Here, we directly image the composition and electrostatic potential with nanometer resolution in the cross section of a nanocrystalline W/Hf 0.5 Zr 0.5 O 2−δ (HZO)/W ferroelectric capacitor using multimodal electron microscopy. This reveals a 1.4 nm wide tungsten suboxide interfacial layer formed at the bottom interface during fabrication, which introduces a potential dip and leads to asymmetric switching fields. Additionally, we compare the measured potentials to DFT calculations and find it is nearly 3 V lower than expected in the HZO, which appears to be caused by oxygen vacancies and a resulting negative built-in potential. In conclusion, these chemical and electrostatic details are important to characterize and tune to achieve high-performance ferroelectric devices.

Defects in solids↗
DOE OSTI2024

Real-Time KMC Simulation of Vacancy-Mediated Intermixing in Au@Ag Octahedral Core–Cubic Shell Nanocrystals with Ab Initio-Guided Kinetics

Utilization of core–shell rather than monometallic nanocrystals (NCs) facilitates fine-tuning of NC properties for applications. However, compositional evolution via intermixing can degrade these properties prompting recent experimental studies. We develop an atomistic-level stochastic model for vacancy-mediated intermixing exploiting a formalism which allows incorporation at an ab initio density functional theory level of not just the thermodynamics of vacancy formation, but also relevant diffusion barriers for a vast number of possible local environments (in the core and in the shell, at the interface, and in the intermixed phase). This facilitates a predictive treatment and comprehensive understanding of intermixing on the relevant time scale (e.g., 10 1 –10 3 s). In contrast, previous modeling at the atomistic level utilized only unrealistic generic prescriptions of barriers or employed simplified continuum treatments. For Au@Ag octahedral core–cubic shell NCs, our modeling not only captures the experimentally observed rate or time scale for intermixing of ~100 s at 450 °C for 60 nm NCs, but also elucidates the underlying rate controlling processes and the effective intermixing barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stationary Oxygen Vacancy Construction toward a Superior-Performance Ultrahigh Nickel Single-Crystal Cathode

Oxygen vacancies exert a complex and profound influence on the layered cathodes, especially those with ultrahigh nickel content. They can facilitate lithium-ion transport and enhance electronic conductivity, while aggressive oxygen vacancy formation causes structural degradation and electrolyte decomposition. Herein, taking ultrahigh nickel single-crystal LiNi 0.92 Co 0.06 Mn 0.02 O 2 (SC-Ni92) as a model material, we propose a pinning strategy to harness the benefits of oxygen vacancies while mitigating their detrimental effects. Through a carefully controlled thermal process, both oxygen vacancies and pinning atoms are successfully introduced into the surface region. The resulting anchored oxygen vacancies, capitalizing on their inherent advantages, improve conductivity and lithium-ion diffusion. Simultaneously, the neighboring pinning atoms effectively increase the migration barrier and suppress the adverse effects of these vacancies, including electrolyte decomposition and structural degradation during long-term electrochemical cycling. Consequently, oxygen vacancy-anchored single-crystal LiNi 0.92 Co 0.06 Mn 0.02 O 2 (SC-Ni92-OV) demonstrates significantly improved high-voltage electrochemical performance, with 86.16% capacity retention after 200 cycles at 4.6 V and 1 C in a half-cell and 90.71% after 300 cycles at 4.5 V and 1 C in a full cell. Furthermore, this study not only provides valuable insights into the chemistry of oxygen vacancy but also introduces a viable strategy for leveraging oxygen vacancies to achieve stable high-voltage performance in ultrahigh nickel single-crystal cathodes.

defects in solids↗
DOE OSTI2025

Inhomogeneous Magnetic Anisotropy in an Fe 5– x GeTe 2 Nanoflake Observed by Imaging

Few-layer flakes of ferromagnetic Fe 5–x GeTe 2 with x = 0.3 (F5GT) possess a c-axis magnetocrystalline anisotropy that is large enough below ∼200 K to outcompete the easy-plane shape anisotropy, yielding distinctive magnetic microstructures with out-of-plane (OOP) magnetizations. Using photoemission electron microscopy (PEEM) with magnetic contrast from X-ray magnetic circular dichroism (XMCD) to study a thermally demagnetized h-BN-protected nanoflake of F5GT at 110 K, we observe a micron-scale coexistence between domains with OOP magnetizations (∼70% areal fraction) and hitherto unknown domains in which in-plane (IP) magnetization components dominate (∼30% areal fraction). The regions with dominant IP magnetization components do not correlate with small variations of flake thickness (6–10 nm) and instead arise from local changes of magnetocrystalline anisotropy due to a hitherto unidentified chemical inhomogeneity that we suggest to be a higher concentration of Fe vacancies. Our observation of micron-scale inhomogeneity would likely be missed if imaging a single flake orientation and should affect the viability and performance of van der Waals (vdW) spintronic devices with F5GT electrodes.

2D materials↗
DOE OSTI2026

The Role of Defect Geometry in Localized Emission from Monolayer Tungsten Dichalcogenides

In two-dimensional transition metal dichalcogenides such as tungsten diselenide (WSe 2 ), single photon emission has been broadly attributed to exciton localization from atomic point defects, yet the precise microscopic origins are unclear. This work introduces an empirically grounded computational framework that explains the origins of facile single photon emission in WSe 2 . High-resolution microscopy identifies native defect geometries in monolayer WSe 2 lattices from which the model is built. Here, the qualitative effects of chalcogen type, defect geometry, and mechanical strain on the electronic structure are individually assessed using density functional theory, and a specific divacancy configuration emerges as the candidate for localized single-electron transitions that match observed spectral energies. Spectroscopy and photon correlation measurements further validate this model, establishing a self-consistent link between defect geometry, electronic structure, and quantum emission.

defect emission↗
DOE OSTI2024

Cation Vacancies Enable Anion Redox in Li Cathodes

Conventional Li-ion battery intercalation cathodes leverage charge compensation that is formally associated with redox on the transition metal. Employing the anions in the charge compensation mechanism, so-called anion redox, can yield higher capacities beyond the traditional limitations of intercalation chemistry. Here, we aim to understand the structural considerations that enable anion oxidation and focus on processes that result in structural changes, such as the formation of persulfide bonds. Using a Li-rich metal sulfide as a model system, we present both first-principles simulations and experimental data that show that cation vacancies are required for anion oxidation. First-principles simulations show that the oxidation of sulfide to persulfide only occurs when a neighboring vacancy is present. To experimentally probe the role of vacancies in anion redox processes, we introduce vacancies into the Li 2 TiS 3 phase while maintaining a high valency of Ti. When the cation sublattice is fully occupied and no vacancies can be formed through transition metal oxidation, the material is electrochemically inert. Upon introduction of vacancies, the material can support high degrees of anion redox, even in the absence of transition metal oxidation. The model system offers fundamental insights to deepen our understanding of structure–property relationships that govern reversible anion redox in sulfides and demonstrates that cation vacancies are required for anion oxidation, in which persulfides are formed.

25 ENERGY STORAGE↗
DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lattice-Nitrogen-Mediated Chemistry Suppresses Hydrogen Evolution for Record Faradaic Efficiency in Ammonia Synthesis

Ammonia (NH 3 ) production using air, water, and electricity offers a transformative route to carbon-free chemical synthesis, addressing global sustainability challenges. However, the hydrogen evolution reaction (HER) in aqueous systems significantly hinders NH 3 selectivity, limiting Faradaic efficiency (FE) to below ~15%. Here, we report an FE of approximately 48%, the highest recorded for aqueous NH 3 synthesis, using two-dimensional (2D) nitride catalysts. These catalysts enable lattice nitrogen protonation through the Mars-van Krevelen (MvK) mechanism, effectively suppressing HER. Using operando spectroelectrochemistry, we identified active sites and tracked nitrogen vacancy cycles, providing unprecedented insights into the reaction pathways. Our findings, supported by advanced computational techniques and complementary spectroscopic analyses, highlight the stability and efficiency of the MvK cycle, setting a new benchmark for sustainable NH 3 production.

catalysts↗
DOE OSTI2025

Dark-field x-ray microscopy for 2D and 3D imaging of microstructural dynamics at the European x-ray free-electron laser

Dark field x-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond x-ray pulses generated by x-ray free-electron lasers (XFELs), DFXM can achieve sub-μm spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically driven longitudinal strain wave propagating through a diamond single crystal. We also present two DFXM scanning modalities that are new to the XFEL sources: spatial 3D and 2D axial-strain scans with sub-μm spatial resolution. With this progress in XFEL-based DFXM, we discuss new opportunities to study multi-timescale spatiotemporal dynamics of microstructures.

47 OTHER INSTRUMENTATION↗
NASA NTRS1983

Micromechanically Based Constitutive Relations for Polycrystalline Solids

A basic method to estimate the overall mechanical response of solids which contain periodically distributed defects is presented. The method estimates the shape and growth pattern of voids periodically distributed over the grain boundaries in a viscous matrix. The relaxed moduli are obtained for a polycrytalline solid that undergoes relaxation by grain boundary sliding which accounts for the interaction effects. The overall inelastic nonlinear response at elevated temperatures in terms of a model which considers nonlinear power law creep within the grains, and linear viscous flow in the grain boundaries is discussed.

Nemat-Nasser, S.↗
DOE OSTI2026

A Chemist’s Guide to Solid-State Qubits: Diamond Color Centers as Embedded Vacancy-Centered Molecules

Diamond point defects or color centers are at the crux of solid-state quantum technology applications, from computing to sensing. Modeling molecular qubits has advanced by leaps and bounds mainly due to the advanced quantum mechanical (QM) tools in the arsenal of quantum chemists for modeling (isolated) molecular systems, which should be easily translatable for analogous systems in the solid state. Here, we simulate a series of diamond defects: a carbon vacancy (V C ) and second row substitutions that are adjacent to a V C or D C V C , with D = B, N, and O, to evaluate their magnetic and optical properties. We applied molecular orbital principles, an embedded cluster method, and a multiconfigurational QM theory to computationally characterize the above-mentioned defects for a multitude of spin, charge, and excited states. Our computational approach delivered high-quality QM insights that compare well with experiments. Furthermore, with this framework, we confirm the spin-triplets B C V C – and O C V C 0 to be analogous to N C V C – , with calculated bright transitions that respectively correspond to UV (3.80 eV) and blue (2.65 eV) light absorption and emission lifetimes (τ) of 2.3 and 5.6 ns, which are higher in energy and more short-lived (and thus brighter) than that for N C V C – : green (2.26 eV), τ = 9.5 ns.

Martirez, John Mark P. [Princeton Plasma Physics L↗
NASA NTRS1994

CoSb(sub 3)-IrSb(sub 3)Solid Solutions: Preparations and Characterization

The binary antimonide compounds of the skutterudite family have a good potential for thermoelectric applications as recent results at JPL have shown. However, the room temperature thermal conductivity of these materials is about 10 Wm(sup -1)K(sup -1) with an 80 % contribution from the lattice. To achieve maximum ZT values, the lattice thermal conductivity needs to be lowered. Because the lattice thermal conductivity of solid solutions can substantially decrease due to the addition of point defect phonon scattering (all state-of-the-art thermoelectric materials are solid solutions), a study of the formation of solid solutions between the antimonide skutterudite compounds is of interest. The preparation and characterization of both p-type and n-type CoSb(sub 3)-IrSb(sub 3) solid solutions by several techniques is reviewed in this paper. Experimental results showed that solid solutions were successfully formed in a wide range of compositions. The changes in the thermoelectric properties indicated the influence of a strong point defect scattering, resulting in large decreases in Hall mobility and thermal conductivity. The potential for high ZT values in CoSb(sub 3)-IrSb(sub 3) solid solutions is discussed.

mobility↗
DOE OSTI2025

Computationally guided experimental validation of divacancy defect formation in 4H-SiC

Recent research into solid-state qubits for quantum information science has focused on optically addressable spin defects such as the negatively charged nitrogen-vacancy center in diamond and the neutrally charged divacancy (VV) in 4H-SiC as scalable quantum sensors and networking qubits. Within this context, direct investigations of the structural origin and defect formation dynamics of a sub-set of the VV center in 4H-SiC remain lacking. Here, we take a systematic experimental approach guided by predictions from first-principles simulations to gain a thorough mechanistic understanding of the VV defect formation and control in 4H-SiC. We study the effect of annealing time and temperature on VV formation in high-purity semi-insulating 4H-SiC samples following electron irradiation. Three different temperatures (1123, 1273, and 1473 K) and annealing duration (from 0.5 to 72 h) are chosen to explore VV formation in different regions. We find that samples annealed at 1273 K give the highest VV-related photoluminescence (PL) intensities, in agreement with the prediction from first-principles calculations. Furthermore, the logarithmic dependence of VV-related PL intensities on the annealing duration at 1273 K indicates that 1273 K provides sufficient thermal energy for silicon vacancy migration but not for VV migration. Together, these results suggest that efficient VV formation occurs above the V Si migration temperature and below the VV migration threshold.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2006

Forces Generated by High Velocity Impact of Ice on a Rigid Structure

Tests were conducted to measure the impact forces generated by cylindrical ice projectiles striking a relatively rigid target. Two types of ice projectiles were used, solid clear ice and lower density fabricated ice. Three forms of solid clear ice were tested: single crystal, poly-crystal, and "rejected" poly-crystal (poly-crystal ice in which defects were detected during inspection.) The solid ice had a density of approximately 56 lb/cu ft (0.9 gm/cu cm). A second set of test specimens, termed "low density ice" was manufactured by molding shaved ice into a cylindrical die to produce ice with a density of approximately 40 lb/cu ft (0.65 gm/cu cm). Both the static mechanical characteristics and the crystalline structure of the ice were found to have little effect on the observed transient response. The impact forces generated by low density ice projectiles, which had very low mechanical strength, were comparable to those of full density solid ice. This supports the hypothesis that at a velocity significantly greater than that required to produce fracture in the ice, the mechanical properties become relatively insignificant, and the impact forces are governed by the shape and mass of the projectile.

Pereira, J. Michael↗
NASA NTRSDate not supplied

A General Model for the Electrochemical Double Layer in Solids

It has long been clear that electrochemical double layer / space charge zone in the vicinity of interfaces and other extended defects greatly influences transport and reactivity. Over the past several years, multiple microscopic measurements of defect concentrations in the vicinity of solid-solid interfaces made clear that dilute-case thermodynamic theories to describe the behavior of charged species in space charge zones are untenable. Inhomogeneous thermodynamics – i.e., phase field models – have delivered the most success in describing both microscopic and macroscopic experiments. We still need a generalized approach that quantitatively reproduces the microscopic and macroscopic evidence, while remaining accessible to a wide range of researchers and engineers. In my talk I will present such a framework, which builds on the previously introduced Poisson-Cahn theory but utilizes data science methods which come into the thermodynamic framework in a well-defined way. I will review recent applications to both microscopic and macroscopic datasets while previewing our plans for connecting the theory to atomistic / first principles calculations and experiment simultaneously. I will also review plans for releasing open source code that runs on desktop-level computational resources.

David Mebane↗
DOE OSTI2024

Laterally Modulating Carrier Concentration by Ion Irradiation in CdO Thin Films for Mid‐IR Plasmonics

This report demonstrates tunable carrier densities in CdO thin films through local ion irradiation, providing lateral control of mid‐IR optical properties. Ion‐solid interactions produce donor‐like defects that boost electron concentrations from the practical minimum of 2.5 × 10 19 cm −3 to a maximum of 2.5 × 10 20 cm −3 by metered ion exposure. This range is achieved using He, N, Ar, or Au ions at 1–2.8 MeV; when normalized by displacements per atom, all ion species produce comparable results. Since CdO is well‐described by the Drude model, irradiation‐tuned carrier densities directly alter the infrared dielectric function, and in turn, mid‐infrared optical properties. Further, it is demonstrated that by combining irradiation with traditional lithography, CdO films expose to ions in the presence of 3‐µm thick, patterned photoresist exhibit lateral carrier density profiles with ≈400‐nm resolution. Scanning near‐field optical microscopy reveals sharp optical interfaces with almost no companion contrast in surface morphology, microstructure, or crystallinity. Finally, CdO lateral homostructures supporting surface plasmon polaritons (SPPs) are demonstrated whose dispersion relation can be tuned through periodic patterning in a monolithic platform by simple nanofabrication. Numerical simulations show these polaritons result from strong coupling between excitations at CdO plasma frequencies and SPPs supported by the platinum substrate.

cadmium oxide↗