SEARCH · Engineering Papers

Results for “das”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2001

Re-Entry Survivability Risk Assessment of the Extreme Ultraviolet Explorer (EUVE)

A reentry analysis of the Extreme Ultraviolet Explorer (EUVE) spacecraft was performed using the Object Reentry Survival Analysis Tool (ORSAT) - Version 5.0. The analysis was done in response to a request by NASA Headquarters and Goddard Space Flight Center (GSFC) after a preliminary assessment using the NASA Johnson Space Center Debris Assessment Software (DAS) - Version 1.0 had shown that the EUVE reentry may produce a debris area greater than the limit set within the NASA Safety Standard 1740.14 guidelines. DAS predicted that an uncontrolled reentry of the EUVE spacecraft would result in a total casualty area of 12.41 sq m, which exceeds the 8 sq m limit set in the NASA standards and implies a potential human casualty risk of approximately 1 in 5300. The ORSAT model enabled a higher fidelity thermal analysis of the EUVE spacecraft, utilizing sophisticated material and thermal properties such as emissivity, heat of oxidation, thermal conductivity, and material thickness inputs, which provided a foundation for a more in depth analysis of the reentering objects. Due to the conservative nature of the DAS study, it was reasonable to run ORSAT for only the ten objects shown to survive in the original DAS analysis. The result of the ORSAT study was a reduced casualty area of only 5.95 sq m, well within NASA safety limits. With the risk to human life now acceptably low, NASA can avoid having to take mitigation measures and allow EUVE to reenter the Earth's atmosphere uncontrolled.

O'Hara, Robin E.↗

NASA NTRS2015

Instrumentation & Data Acquisition System (D AS) Engineer

The primary job of an Instrumentation and Data Acquisition System (DAS) Engineer is to properly measure physical phenomenon of hardware using appropriate instrumentation and DAS equipment designed to record data during a specified test of the hardware. A DAS system includes a CPU or processor, a data storage device such as a hard drive, a data communication bus such as Universal Serial Bus, software to control the DAS system processes like calibrations, recording of data and processing of data. It also includes signal conditioning amplifiers, and certain sensors for specified measurements. My internship responsibilities have included testing and adjusting Pacific Instruments Model 9355 signal conditioning amplifiers, writing and performing checkout procedures, writing and performing calibration procedures while learning the basics of instrumentation.

Jackson, Markus Deon↗

NASA NTRS2018

Global Assimilation of Loon Stratospheric Balloon Observations

Project Loon has an overall goal of providing worldwide internet coverage using a network of long-durationsuper-pressure balloons. Since 2013, Loon has launched over 1600 balloons from multiple tropical and middlelatitude locations. These GPS tracked balloon trajectories provide lower stratospheric wind information overthe oceans and remote land areas where traditional radiosonde soundings are sparse, thus providing uniquecoverage of lower stratospheric winds. To fully investigate these Loon winds we: 1) compare the Loon windsto winds produced by a global data assimilation system (DAS: NASA GEOS) and 2) assimilate the Loon windsinto the same comprehensive DAS. Results show that in middle latitudes the Loon winds and DAS winds agreewell, and the Loon wind assimilation has only a minor impact on the forecasts. However, in the Tropics, thereis often a substantial difference between the assimilated winds and the observed Loon winds, of 8 m/s or morein magnitude. In these cases, assimilating the Loon winds significantly improves the meteorological analysesand subsequently the forecasts of the Loon winds. By highlighting cases where the Loon and DAS winds differ,these results can lead to improved understanding of stratospheric winds, especially in the tropics, as well asaiding analyses of the representation of dynamical forcing mechanisms in the GEOS model.

Coy, Lawrence↗

NASA NTRS2019

Comparing Flood-Producing Catastrophic Hurricanes in GEOS: A Study of Juan 1985 and Harvey 2017

Hurricanes Juan (1985) and Harvey (2017) bear remarkable similarities because of the exceptional amount of accumulated precipitation over coastal regions in the Gulf, consequent to the peculiar and rare situation in which a hurricane stalls for several days on a coastal area, displaying minimal progress. This is particularly dangerous because: a) terrestrial drag affect only part of the circulation so that weakening is not as fast as when there is rapid motion inland; b) a part of the circulation remains over water and as such low-level moisture flux convergence is maintained; c) precipitation lasts for a very long time over the same area; d) moisture recycling from flooded areas further contributes to maintaining flood conditions. From the forecast perspective, hurricanes with track singularities such as stalling points, loops, or multiple landfalls over the same region are exceptionally difficult to predict because they result from small variations of opposing mechanisms and are therefore intrinsically unstable. Intensity fluctuations and track singularities are strongly coupled. The representation of fluxes undergoing differential drag (ocean vs. land) inside the same circulation is critically dependent upon resolution. Recent modeling development efforts within the NASA Global Modeling and Assimilation Office (GMAO) have brought the horizontal resolution of the global cubed-sphere Goddard Earth Observing System (GEOS) atmospheric model down to 12 km. This has led to innovative findings in the field of tropical cyclone (TC) modeling within a global framework. The GEOS atmospheric model and data assimilation system (DAS), used to produce the MERRA-2 (Modern Era Retrospective analysis for Research and Applications) reanalysis, has a "Replay" capability that adds a forcing term to the model equations to constrain it to follow a specified trajectory. This capability is used to produce global, downscaled versions of the 50 km MERRA-2 reanalysis at a 12.5 km resolution. The full DAS and replay modes both use the Incremental Analysis Update or IAU for applying an analysis increment to the model's background state four times each day at 00Z, 06Z, 12Z and 18Z. In a full DAS mode, a six-hour free run of the model is made (Predictor Step), writing states that will be used as backgrounds or first-guesses for the analysis centered on 00Z. The Analysis system then produces its best estimate of the 00Z state by blending backgrounds with observations. The difference between this best estimate and the model's original first guess at 00Z is treated as an analysis increment and added uniformly as a forcing term to the model during a second, now forced, run of the 12Z to 03Z window, which produces the assimilated results. Replay mode is very similar, except only the 00Z background is needed from the predictor segment, which is thus half as long, and instead of doing an analysis, a previously analyzed state at 00Z is read in. The increment is then computed and applied to the corrector step in the same way as in the original DAS. When downscaling horizontal spatial filters can be applied to the "analysis" increment used to force the Corrector step, so as to reproduce the full meteorological state or selectively choose or discard certain forcings. In this presentation, full global hindcast simulations of Juan and operational forecasts of Harvey are compared.

Flooding↗

NASA NTRSDate not supplied

TPSAS-NF1676L-32060-DND

All previous PSP testing done in the Unitary Plan Wind Tunnel (UPWT) have required a significant amount of manual operation of the system. This has resulted in decreased testing efficiency and precluded the ability to provide near real-time data analysis to the customer. The overall goal of this project is to integrate the PSP data acquisition system into the supersonic UPWT data acquisition system (DAS) and create an adaptive software platform from which PSP data acquisition can be triggered by the tunnel and critical testing conditions can be recorded in real time for rapid analysis of the PSP data. This analysis includes the mapping of up to eight camera views onto a surface grid for analysis and converting to pressure using parameters supplied by the DAS. To fully implement this solution, communication must first be established between the Unitary DAS and the PSP DAS. This will be done by employing multiple scripts written in Python and C++ and implemented on a Linux cluster. These will be demonstrated and refined on an upcoming test (December 2018), and the successful completion will result in the ability to have automatic collection of PSP images and near real-time analysis capabilities.

Juliette Eddins↗

DOE OSTI2024

Cape EGS: Frisco Pad Wells Flow Test Microseismic Data

This dataset contains microseismic data acquired during the Frisco pad flow test project led by Fervo Energy, conducted between July 17th - Aug 12th 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed Acoustic Sensing (DAS) fiber in 16B, and two 3-component geophones located in wells 56-32 and 78B. The dataset is structured in SEGY format, where the first six traces represent data from the geophones, and the remaining traces capture DAS data from well 16B. Each SEGY file in this dataset contains triggered microseismic events, with event initiation based on Short-Time Average over Long-Time Average (STA/LTA) detection criteria during the stimulation process. Files are grouped by time intervals and named following the structure "[WellPad][WellName][Month]_[Year]Divine_Trigger[EventNumber].sgy," indicating well pad, well name, date, and event number. Sampling parameters include a spatial sampling of approximately 2 meters for DAS channels and a temporal sampling rate of 2000 Hz, with each data record spanning 1.2 seconds. The files' coordinates are referenced to the location of the FORGE 16A-32 wellhead, positioned at UTM coordinates: Easting 334641.1891 m and Northing 4263443.693 m. The geographic coordinates for this origin are 38.50402147 latitude and -112.8963897 longitude, with an elevation of 1650.0249 meters above sea level.

15 GEOTHERMAL ENERGY↗

DOE OSTI2024

Cape EGS: Frisco 2-P Well Stimulation Microseismic Data

This dataset contains microseismic data acquired during the Frisco 2-P well stimulation project led by Fervo Energy, conducted between June 1 and June 11, 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed Acoustic Sensing (DAS) fiber in 16B, and three 3-component geophones located in wells 56-32, 78B, and 32. The dataset is structured in SEGY format, where the first nine traces represent data from the geophones, and the remaining traces capture DAS data from well 16B. Each SEGY file in this dataset contains triggered microseismic events, with event initiation based on Short-Time Average over Long-Time Average (STA/LTA) detection criteria during the stimulation process. Files are grouped by time intervals and named following the structure "[WellPad][WellName][Month]_[Year]Divine_Trigger[EventNumber].sgy," indicating well pad, well name, date, and event number. Sampling parameters include a spatial sampling of approximately 2 meters for DAS channels and a temporal sampling rate of 2000 Hz, with each data record spanning 1.2 seconds. The files' coordinates are referenced to the location of the FORGE 16A-32 wellhead, positioned at UTM coordinates: Easting 334641.1891 m and Northing 4263443.693 m. The geographic coordinates for this origin are 38.50402147 latitude and -112.8963897 longitude, with an elevation of 1650.0249 meters above sea level.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Fostering Geothermal Machine Learning Success: Elevating Big Data Accessibility and Automated Data Standardization in the Geothermal Data Repository

The Department of Energy's (DOE's) Geothermal Data Repository (GDR) has implemented improvements to both its data lakes and its data standards and automated data pipelines. The GDR data lakes have reduced storage and compute-related barriers to using large geothermal datasets, enabling these large datasets to be accessed by anyone with a modern computer and internet access. More recently, the GDR has been working to further reduce barriers through streamlining the data intake process, educating users on the process and requirements, and helping users access data from the data lakes. These improvements have augmented the quantity of datasets the GDR is able to accept into its data lakes and have enabled users who are new to cloud tools to access these datasets more easily, overall increasing the accessibility of big geothermal data for use in machine learning and other projects. In addition, the GDR now has built-in data standards and pipelines for drilling data, geospatial data, and distributed acoustic sensing (DAS) data. These standardization efforts aim to enhance the real-world applicability of geothermal machine learning outcomes by improving the quality of training data. Specifically, through standardizing high-value datasets, the GDR is reducing project-specific data curation requirements, thus allowing more time for actual research. By automating this process, the burden of standardization is lifted from the user, ultimately increasing the availability of standardized data. This paper provides an update on recent improvements made to the GDR's data lakes and automated data pipelines, including: (1) streamlining the data lake intake process, (2) better educating users on the process and requirements through a new data lakes page, (3) adding data lake direct access links to GDR data lake submission pages, (4) implementing a DAS data pipeline to convert DAS data uploaded in SEG-Y format to a standardized hierarchical data format v5 (HDF5), (5) extending this pipeline to encompass data in the GDR data lake, (6) adding metadata requirements for geospatial data, (7) making user interface/user experience (UX) enhancements to the data pipelines' documentation pages, and (8) improving the GDR's data standards and pipelines pages to better guide users in ensuring that their data is standardized by the GDR's automated data pipelines. 2024 Geothermal Resources Council. All rights reserved.

accessibility↗

DOE OSTI2024

FiberFlex: Real-time FPGA-based Intelligent and Distributed Fiber Sensor System for Pedestrian Recognition

In recent years, security monitoring of public places and critical infrastructure has heavily relied on the widespread use of cameras, raising concerns about personal privacy violations. To balance the need for effective security monitoring with the protection of personal privacy, we explore the potential of optical fiber sensors for this application. This article proposes FiberFlex, an intelligent and distributed fiber sensor system. Ultizing Field Programmable Gate Arrays (FPGA) high-level synthesis (HLS) acceleration, FiberFlex offers real-time pedestrian detection by co-designing the entire pipeline of optical signal acquisition, processing, and recognition networks based on the principles of optical fiber sensing. As a promising alternative to traditional camera-based monitoring systems, FiberFlex achieves pedestrian detection by analyzing the vibration patterns caused by pedestrian footsteps, enabling security monitoring while preserving individual privacy. FiberFlex comprises three modules: First , fiber-optic sensing system: A fiber-optic distributed acoustic sensing (DAS) system is built and used to measure the ground vibration waves generated by people walking. Second , algorithms: We first collect the training data by measuring the ground vibration waves, label the data, and use the data to train the neural network models to perform pedestrian recognition. Third , hardware accelerators: We use HLS tools to design hardware modules on FPGA for data collection and pre-processing and integrate them with the downstream neural network accelerators to perform in-line real-time pedestrian detection. The final detection results are sent back from FPGA to the host CPU. We implement our system FiberFlex with the in-house built DAS system and AMD/Xilinx Kintex7 FPGA KC705 board and verify the whole system using the real-world collected data. We conduct recognition tests on five test subjects of varying ages, heights, and weights in a fixed sensing area. Each subject experienced 20 real-time recognition tests using their daily walking habits, and the subjects were given adequate rest between tests. After 100 tests on five test subjects, the overall real-time recognition accuracy exceeded \(88.0\%\) . The whole system uses 55 W of power, 33 W in the optical DAS system and 22 W in the FPGA. Relying on its end-to-end interdisciplinary design, FiberFlex seamlessly combines fiber-optic sensors with FPGA accelerators to enable low-power real-time security monitoring without compromising privacy, making it a valuable addition to the existing security monitoring network. According to FiberFlex, more valuable research can be conducted in the future, such as fall monitoring for the elderly, migration of identification networks between different application scenarios, and improvement of anti-interference performance in more complex environments. In future perception networks, where the “eyes” are not feasible, let’s use fiber optic touch instead.

Distributed↗

DOE OSTI2025

Expansion of the Fast Neutron Hodoscope at TREAT to Support Fuel Safety Experiments

In 2024 the Fuel Motion Monitoring System (FMMS), or Hodoscope, at the Transient Reactor Test Facility, is being expanded from 96 viewing channels to 192 viewing channels, effectively doubling the FMMS field of view. Here, this increase in capability will allow the FMMS to support larger scale fuel tests, encompassing height-of-core test devices, test devices with multi-pin fuel assemblies, and test devices with recirculating coolant flow. Work supporting the expansion included refurbishing 96 additional proton recoil scintillator (PRS) detectors, doubling the data acquisition system (DAS) installed architecture, improving time synchronization in the DAS, and new research to measure the PRS detector energy-dependent, fast-neutron detection efficiency. In addition, laboratory activities have produced an improved benchtop testing capability for assessing the DAS, time synchronization, and external start triggering, along with an updated capability to scan PRS detectors to develop a preliminary flat-field normalization prior to deployment to TREAT.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

DOE OSTI2025

Annual Status Report (FY 2024): Performance Assessment for the Integrated Disposal Facility

The purpose of this Annual Summary Report (ASR) for Fiscal Year (FY) 2024 is to evaluate the continued adequacy of the Integrated Disposal Facility (IDF) Performance Assessment (PA) and Disposal Authorization Statement (DAS). This report consolidates relevant monitoring data, modeling analyses, and regulatory reviews to demonstrate a reasonable expectation that the PA objectives and performance measures will be met, as required under DOE O 435.1. The ASR follows the guidance in DOE-STD-5002-2017, which provides a framework for maintaining the validity of the DAS through periodic assessment of facility performance and compliance with waste disposal requirements. The IDF is a near-surface disposal facility designed to receive and permanently dispose of low-level waste (LLW) and mixed low-level waste (MLLW) generated from Hanford Site operations. The facility consists of two double-lined disposal cells equipped with leak detection and leachates recovery systems to ensure environmental protection. Waste planned for disposal includes vitrified low-activity waste (LAW) and solid secondary waste (SSW) from the Hanford Waste Treatment and Immobilization Plant (WTP). At the end of FY 2024, the IDF had not yet received any waste, as it remains in a pre-operational state. Disposal activities will begin with the hot commissioning of the WTP LAW Vitrification Facility using the Direct-Feed Low-Activity Waste (DFLAW) approach in Calendar Year (CY) 2025. This ASR justifies the continued adequacy of the PA and DAS by reviewing key documents and data sources. these sources are listed in Table A-2 in Appendix A.4): The Operating Disposal Authorization Statement (ODAS) for the IDF (DOE-EM, 2021) remains in effect, with no outstanding conditions or key issues affecting its implementation. Based on the comprehensive review of PA analyses, monitoring data, and regulatory compliance activities, this ASR concludes that the IDF remains in compliance with DOE O 435.1, and there is reasonable assurance that the PA performance objectives will be met once disposal operations commence in CY 2025.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1979

Wind tunnel real-time data acquisition system

The hardware configuration is described for the data acquisition system (DAS) which consists of an analog front end that can process up to 260 channels of data, a multichannel analog-to-digital subsystem that can process up to 50,000 samples of data per second, and a digital computer with standard and nonstandard devices, including graphics capability. Also described are the software configuration of the DAS and complex hardware/software interfaces providing, for example, automatic amplifier gain and offset adjustment for each data channel. Specific DAS applications are summarized, including the real time processing of dynamic deflection data, unsteady pressure measurements, and flutter and buffet data.

Cole, P.↗

NASA NTRS1984

Field tests of the real-data acquisiton system for the NASA-LaRC differential absorption lidar

A data acquisition system (DAS) for the NASA/LaRC Differential Absorption Lidar (DIAL) was documented. This DAS is a dual LSI 11/23 set up where one computer retrieves data from the digitizers and other peripheral units, stores that data on magnetic tape, generates aerosol grayscales on a Trilog printer and passes data to the second computer. The second computer is dedicated to real time displays of the data in a variety of modes from raw data to range resolved ozone profiles. The DIAL DAS also has several new features.

Butler, C.↗

NASA NTRS1995

Telescience operations with the solar array module plasma interaction experiment

The Solar Array Module Plasma Interactions Experiment (SAMPIE) is a flight experiment that flew on the Space Shuttle Columbia (STS-62) in March 1994, as part of the OAST-2 mission. The overall objective of SAMPIE was to determine the adverse environmental interactions within the space plasma of low earth orbit (LEO) on modern solar cells and space power system materials which are artificially biased to high positive and negative direct current (DC) voltages. The two environmental interactions of interest included high voltage arcing from the samples to the space plasma and parasitic current losses. High voltage arcing can cause physical damage to power system materials and shorten expected hardware life. parasitic current losses can reduce power system efficiency because electric currents generated in a power system drain into the surrounding plasma via parasitic resistance. The flight electronics included two programmable high voltage DC power supplies to bias the experiment samples, instruments to measure the surrounding plasma environment in the STS cargo bay, and the on-board data acquisition system (DAS). The DAS provided in-flight experiment control, data storage, and communications through the Goddard Space Flight Center (GSFC) Hitchhiker flight avionics to the GSFC Payload Operations Control Center (POCC). The DAS and the SAMPIE POCC computer systems were designed for telescience operations; this paper will focus on the experiences of the SAMPIE team regarding telescience development and operations from the GSFC POCC during STS-62. The SAMPIE conceptual development, hardware design, and system verification testing were accomplished at the NASA Lewis Research Center (LeRC). SAMPIE was developed under the In-Space Technology Experiment Program (IN-STEP), which sponsors NASA, industry, and university flight experiments designed to enable and enhance space flight technology. The IN-STEP Program is sponsored by the Office of Space Access and Technology (OSAT).

Wald, Lawrence W.↗

NASA NTRS1999

Impact of a Merged Precipitation Data on Global Soil Moisture Variability

Accurate soil moisture information has proved to be important to climate simulations and climate and weather forecasts. However, many difficulties exist that limit our understanding of soil moisture distribution and variability. One of them is the lack of accurate precipitation with appropriate spatial and temporal resolution. Precipitation as an input forcing to the land surface greatly influences soil moisture characteristics and variability. To improve precipitation data quality, an algorithm has been developed to generate a spatially and temporally continuous 3-hourly global precipitation data for the period of 1987 to present. This precipitation product is a combination of the precipitation from Special Sensor Microwave Imager (SSMI) with the Goddard Earth Observing System-1 Data Assimilation System (GEOS-1 DAS) employing a Physical-space Statistical Analysis System (PSAS). In this study we investigate the impact of this merged/analyzed precipitation data on the global soil moisture variability using an Off-line Land-surface GEOS Assimilation (OLGA) system. Two OLGA integrations starting from 1987 to 1993 are performed forced with the analyzed and GEOS-1 DAS precipitation respectively. We examine the spatial and temporal characteristics of soil moisture variability in response to the analyzed precipitation. The influence of this merged precipitation on the soil moisture variability and regional hydrological budget is estimated throughout the comparison with the results forced with the GEOS-1 DAS precipitation only. In the OLGA the sut@-grid scale horizontal heterogeneity is explicitly represented on the tile space. This provides a means to assess the role of the surface moisture heterogeneity in the interaction with the surface atmosphere and surface hydrological budget, and to validate OLGA results at tile space with in situ observation. ABRACOS (Anglo-Brazilian Amazonian Climate Observation Study), FIFE (First ISLSCP Field Experiment) I and HAPEX data will be used in the validation.

Yang, Runhua↗

NASA NTRS1999

Improving Reanalyses Using TRMM and SSM/I-Derived Precipitation and Total Precipitable Water Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of rainfall and total precipitable water (TPW) observations from the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve these fields in reanalyses. The DAO has developed a "1+1"D procedure to assimilate 6-hr averaged rainfall and TPW into the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS. The "1+1" designation refers to one spatial dimension plus one temporal dimension. The scheme minimizes the least-square differences between the satellite-retrieved rain rates and those produced by the column model over the 6-hr analysis window. The control variables are analysis increments of moisture within the Incremental Analysis Update (IAU) framework of the GEOS DAS. This 1+1D scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but differs in its choice of the control variable. Instead of estimating the initial condition at the beginning of the assimilation cycle, it estimates the constant IAU forcing applied over a 6-hr assimilation cycle. In doing so, it imposes the forecast model as a weak constraint in a manner similar to the variational continuous assimilation techniques. We present results from an experiment in which the observed rain rate and TPW are assumed to be "perfect". They show that assimilating the TMI and SSM/I-derived surface precipitation and TPW observations improves not only the precipitation and moisture fields but also key climate parameters directly linked to convective activities such as clouds, the outgoing longwave radiation, and the large-scale circulation in the tropics. In particular, assimilating these data types reduce the state-dependent systematic errors in the assimilated products. The improved analysis also leads to a better short-range forecast, but the impact is modest compared with improvements in the time-averaged fields. These results suggest that, in the presence of biases and other errors of the forecast model, it is possible to improve the time-averaged "climate content" in the assimilated data without comparable improvements in the short-range forecast skill. Results of this experiment provide a useful benchmark for evaluating error covariance models for optimal use of these data types.

Hou, Arthur Y.↗

NASA NTRS1999

Validation of the Land-Surface Energy Budget and Planetary Boundary Layer for Several Intensive field Experiments

Land-surface processes in a data assimilation system influence the lower troposphere and must be properly represented. With the recent incorporation of the Mosaic Land-surface Model (LSM) into the GEOS Data Assimilation System (DAS), the detailed land-surface processes require strict validation. While global data sources can identify large-scale systematic biases at the monthly timescale, the diurnal cycle is difficult to validate. Moreover, global data sets rarely include variables such as evaporation, sensible heat and soil water. Intensive field experiments, on the other hand, can provide high temporal resolution energy budget and vertical profile data for sufficiently long periods, without global coverage. Here, we evaluate the GEOS DAS against several intensive field experiments. The field experiments are First ISLSCP Field Experiment (FIFE, Kansas, summer 1987), Cabauw (as used in PILPS, Netherlands, summer 1987), Atmospheric Radiation Measurement (ARM, Southern Great Plains, winter and summer 1998) and the Surface Heat Budget of the Arctic Ocean (SHEBA, Arctic ice sheet, winter and summer 1998). The sites provide complete surface energy budget data for periods of at least one year, and some periods of vertical profiles. This comparison provides a detailed validation of the Mosaic LSM within the GEOS DAS for a variety of climatologic and geographic conditions.

Bosilovich, Michael G.↗

NASA NTRS1998

Vertical Distribution of Saharan Dust from the Goddard Three Dimensional Transport Model: Comparison with LITE Data

Spatial distributions of Saharan dust are simulated by the Goddard 3D chemistry transport model driven by meteorological fields from the Goddard Earth Observing System Data Assimilation System, GEOS-2 DAS. An aerosol module accounts for gravitational settling and the aerosol source function is based on surface moisture content and wind speed. The simulated aerosol fields are compared with Total Ozone Mapping Spectrometer (TOMS) by P. Ginoux in this session. The main focus is how ventilation of the assimilation winds will impact the simulated aerosol vertical distribution. Excessive ventilation would transport too much aerosol in the upper troposphere and lead to errors in the long range transport as well as errors in any radiative forcing calculations derived from the simulated aerosol fields. Simulated aerosol fields using GEOS-1 DAS wind fields for September 1994 will be compared with lidar observations during the Lidar In-space Technology Experiment (LITE). The lidar return signal clearly delineates the vertical extent and horizontal variability of the aerosol layer allowing rigorous comparison with the simulated fields. A second focus is the simulation of aerosol scavenging due to moist processes. Three-dimensional precipitation fields can be derived from two possible sources: Assimilated precipitation fields from GEOS-DAS or fields obtained from the Special Sensor Microwave/imager (SSM/1). Of interest is the sensitivity of the modeled aerosol fields to the different precipitation fields driving the moist scavenging module.

Weaver, Clark J.↗