Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystalline systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

3D seismic imaging of a fracture damage zone controlling reservoir compartmentalization at the Raft River EGS using multi-azimuth walkaway VSP

Accurate imaging of steeply dipping fracture zones in crystalline enhanced geothermal systems (EGS) is critical for constraining permeability architecture and guiding stimulation design. However, such structures remain poorly resolved by conventional surface seismic methods. We present a fully three-dimensional (3D) elastic-waveform inversion-migration workflow applied to multi-azimuth walkaway vertical seismic profiling (VSP) data acquired in a deviated borehole at the Raft River EGS. The workflow integrates first-arrival traveltime tomography, multi-scale elastic waveform inversion (EWI), and elastic least-squares reverse-time migration (ELSRTM) to recover high-resolution compressional-and shear-wave velocity models and to image structural discontinuities in the crystalline basement. The results reveal a laterally continuous low-velocity anomaly, with shear-wave velocity reductions of 25-30%, consistent with fractureinduced mechanical weakening. Two steeply dipping discontinuities bound a 50-80 m wide fracture damage zone. Independent constraints from microseismic clustering and geochemical compartmentalization corroborate the geometry and structural significance of this feature. Synthetic modeling further confirms that structures of this scale are resolvable (~30 m). These findings indicate that the Narrows structure is a distributed fracture damage zone rather than a discrete fault plane. By resolving fracture-zone geometry at the tens-of-meters scale using a single borehole, this workflow provides a practical and transferable approach for improving structural characterization, reducing uncertainty in permeability architecture, and supporting reservoir modeling and stimulation design in fractured crystalline EGS reservoirs.

58 GEOSCIENCES↗
DOE OSTI2022

Material Characterization for Large Scale Additive Manufacturing (AM)

The objective of this project was to enable prediction of residual stresses and warpage for extrusion deposition additive manufacturing (EDAM) fabricated carbon fiber thermoplastic matrix parts with three different materials systems produced by Techmer. The materials selected include Polyphenylene sulfide reinforced with 50% by weight of carbon fiber (CF-PPS), Polyethersulfone reinforced with 25% by weight of carbon fiber (CF-PESU), Polysulfone reinforced with 25% by weight of carbon fiber (CF-PSU). ADDITIVE3D © , a physics-based simulation workflow for EDAM, provided the simulation capabilities required for this project. Simulation predictions were validated against measurements carried out during and after the printing process carried out in the CAMRI and LSAM systems . Predictions for temperature, degree of crystallinity and deformation were carried out for the three material systems and two different geometries. Predictions for temperature were correlated very well with the experimental measurements for the two geometries printed using the three-material systems. The crystallinity level was verified for CF-PPS. The predictions for part deformation were in good agreement with the experimental measurements. In the best-case, predictions were within 8% of the maximum displacement observed in the 3-direction whereas predictions were within 14% for the worst-case. The adoption of this technology in commercial large-scale EDAM production processes would dramatically reduce the costs associated with producing articles by that process. Many thousands of dollars in materials, energy, and machine time could be saved by utilizing this simulation technology to develop articles rather than iterative printings to arrive at the optimal or correct design. The avoidance of a single failed print has the possibility of saving tens of thousands of dollars involved in the cost of material, machine and operators’ time.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic field induced partially polarized chiral spin liquid in a transition metal dichalcogenide moiré system

As one of the most intriguing states of matter, the chiral spin liquid (CSL) has attracted much scientific interest while its existence and mechanism in crystalline strongly correlated systems remain hotly debated. On the other hand, strong correlation driven emergent phenomena can be realized in twisted transition metal dichalcogenide bilayers with a tremendously tunable large length scale providing a new platform for the emergence of CSLs. Here, we focus on a strongly correlated model relevant to heterobilayer WSe 2 /MoSe 2 and investigate the Mott insulating phase at half filling under an out-of-plane magnetic field. Considering both its orbital and spin Zeeman effects we identify three conventionally ordered phases including a 120° Néel phase, a stripe phase, and an up-up-down phase. For intermediate fields an emergent quantum spin liquid phase is identified with partial spin polarization. We further characterize its topological nature as the v = 1/2 Laughlin CSL through the topological entanglement spectrum and quantized spin pumping under spin flux insertion. In addition, we map out the quantum phase diagram for different twisted angles in an experimentally accessible parameter regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Reduced Temperature Cesium Removal from AP-107 Using Crystalline Silicotitanate

The Tank Side Cesium Removal (TSCR) system is currently being constructed to process Hanford tank waste supernates for vitrification. TSCR incorporates a filtration system and cesium (Cs) removal system using columns filled with crystalline silicotitanate (CST) ion exchanger, produced by Honeywell UOP, LLC (product IONSIV™ R9140-B).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Benefits and risks of lead halide perovskite photovoltaics

Photovoltaics (PV) do not emit anything during operation, but, over their life-cycle, emissions are generated from the use of fossil-fuels in the extraction and production of materials and in the manufacturing and installation of PV components and systems. Nonetheless, these emissions are always very small compared to those from conventional combustion-based generators of electricity. The case for CO2 emissions has been well documented; over their lifetime, they range from 10 g CO2-eq / kWh for CdTe PV system installed in high-irradiation (2300 kWh/(m2-yr) locations to 80 g CO2-eq / kWh for Chinese single-crystalline silicon PV systems installed in low-irradiation (1000 kWh/(m2-yr) locations,1 compared to ~1000 g CO2-eq/kWh for electricity from coal. However, in the case of the rapidly emerging lead halide perovskite PV (LHP-PV) technology, concerns are raised regarding the potential of emissions of lead from the life-cycles of LHP-PV, including at their end of life. This warranted an evaluation of lead emissions from PV and comparisons with emissions in other power generation life-cycles.

Perovskites, PV, Lead, Risks↗
DOE OSTI2025

Crystalline Order Yet Glass-Like Heat Transport Driven by Hidden Local Distortions as the Structural Origin of Ultralow Thermal Conductivity in AgErTe 2

Given their rich chemical diversity and the interplay among the p-, d-, and f-orbitals of chalcogens, transition metals, and lanthanides, respectively, rare-earth transition-metal chalcogenides exhibit a wide variety of structural, magnetic, and transport phenomena. As a result, they form a particularly appealing platform for investigating structure–property relationships, emergent electronic and magnetic behaviors, and thermal transport. Here we investigate AgErTe 2 as a model system to understand phonon-glass behavior in ordered crystalline solids, which establishes the design principles for thermal barrier coatings and next-generation thermoelectrics. The local bonding asymmetry and lattice softness suppress the inherently low lattice thermal conductivity, resembling the characteristics of amorphous materials. This suppression is significantly influenced by local off-centering of Ag atoms, which breaks lattice periodicity while maintaining global crystallinity. The presence of antibonding states just below the Fermi level, arising from Ag 4d and Te 5p orbital interactions, leads to lattice softening and destabilizes ideal tetrahedral coordination, resulting in a pseudo Jahn–Teller distortion. Furthermore, the coexistence of weaker, more polarizable Ag–Te bonds and stronger Er–Te bonds creates a complex vibrational landscape enriched with low-frequency modes and enhanced phonon scattering. A pronounced disparity in interatomic force constants gives rise to highly localized, low-energy optical phonons linked to Ag rattling. These flat vibrational modes exhibit strong coupling with transverse acoustic phonons, resulting in ultrashort phonon lifetimes and mean free paths approaching interatomic distances. These features collectively enhance phonon scattering across a broad range of length and energy scales. This work offers a framework for engineering suppressed thermal conductivity in crystalline systems without the introduction of alloying elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2008

Digital X-ray camera for quality evaluation three-dimensional topographic reconstruction of single crystals of biological macromolecules

The present invention provides a digital topography imaging system for determining the crystalline structure of a biological macromolecule, wherein the system employs a charge coupled device (CCD) camera with antiblooming circuitry to directly convert x-ray signals to electrical signals without the use of phosphor and measures reflection profiles from the x-ray emitting source after x-rays are passed through a sample. Methods for using said system are also provided.

Borgstahl, Gloria↗
DOE OSTI2021

Impact of duration and missing data on the long-term photovoltaic degradation rate estimation

Accurate quantification of photovoltaic (PV) system degradation rate (R D ) is essential for lifetime yield predictions. Although R D is a critical parameter, its estimation lacks a standardized methodology that can be applied on outdoor field data. The purpose of this paper is to investigate the impact of time period duration and missing data on R D by analyzing the performance of different techniques applied to synthetic PV system data at different linear R D patterns and known noise conditions. The analysis includes the application of different techniques to a 10-year synthetic dataset of a crystalline Silicon PV system, with emulated degradation levels and imputed missing data. Here, the analysis demonstrated that the accuracy of ordinary least squares (OLS), year-on-year (YOY), autoregressive integrated moving average (ARIMA) and robust principal component analysis (RPCA) techniques is affected by the evaluation duration with all techniques converging to lower R D deviations over the 10-year evaluation, apart from RPCA at high degradation levels. Moreover, the estimated R D is strongly affected by the amount of missing data. Filtering out the corrupted data yielded more accurate R D results for all techniques. It is proven that the application of a change-point detection stage is necessary and guidelines for accurate R D estimation are provided.

14 SOLAR ENERGY↗
DOE OSTI2020

Quasicrystalline phase and crystalline approximant in Ni–Mn–In Heusler alloy system

Intermetallic compounds and micro-structures in Ni–Mn–In alloy system were investigated with transmission electron microscopy, selected-area and nano-beam electron diffraction, and energy-dispersive x-ray spectroscopy. Together with two types of Heusler phases, a decagonal quasicrystalline phase and a structurally related crystallite were found in the Ni–Mn–In system. As is well-known, most of the decagonal quasicrystals are aluminum-based intermetallic phases. It is interesting to investigate the aluminum-free decagonal quasicrystalline phase as a new member of the quasicrystal family. Structural characterization was carried out on the decagonal quasicrystalline phase and the crystalline approximant in the Ni–Mn–In alloy system.

36 MATERIALS SCIENCE↗
NASA NTRS1978

Thermal control of low-pressure fractionation processes

Thermal models detailing the solidification paths for shallow basaltic magma chambers (both open and closed systems) were calculated using finite-difference techniques. The total solidification time for closed chambers are comparable to previously published calculations; however, the temperature-time paths are not. These paths are dependent on the phase relations and the crystallinity of the system, because both affect the manner in which the latent heat of crystallization is distributed. In open systems, where a chamber would be periodically replenished with additional parental liquid, calculations indicate that the possibility is strong that a steady-state temperature interval is achieved near a major phase boundary. In these cases it is straightforward to analyze fractionation models of the basaltic liquid evolution and their corresponding cumulate sequences. This steady thermal fractionating state can be invoked to explain large amounts of erupted basalts of similar composition over long time periods from the same volcanic center and some rhythmically layered basic cumulate sequences.

Usselman, T. M.↗
DOE OSTI2024

Hydrologic windows into the crystalline basement and their controls on groundwater flow patterns across the Paradox Basin, western USA

Conceptual models of sedimentary basin groundwater flow systems typically assume that the crystalline basement acts as an impermeable boundary and can be neglected. In this study, we use hydrologic models constrained by isotopic and geochemical datasets to argue that the La Sal Mountains, Utah, USA, act as a hydrologic window into the Paradox Basin’s lower aquifer system and underlying crystalline basement. We conducted a sensitivity study in which we varied crystalline basement/laccolith permeability as well as fault zone connectivity along a cross-sectional transect from the La Sal Mountains to Lisbon Valley. When the crystalline basement/laccolith units are set at relatively permeable levels (10–14 m 2 ), simulated tracers that include total dissolved solids, oxygen isotopic composition of pore fluids (δ 18 O), and groundwater residence times are in closest agreement with field measurements. Model results indicate that pore fluids in the basal aquifer system underlying the Paradox Formation confining unit are a mixture of relatively young meteoric fluids and older Paradox Formation brines. The presence of faults did not significantly modify fluid exchange between the upper and lower aquifer systems. This was due, in part, to underpressuring within the Paradox Formation. Our study concludes that the Paradox Basin represents a regional recharge area for the Colorado Plateau, with groundwater discharge occurring along the Colorado River within the Grand Canyon some 375 km away to the southwest. This is only possible with a permeable crystalline basement. Our findings help explain the genesis of Mississippi Valley-type ore deposits of the US Midcontinent, where the presence of a permeable basement may be useful in addressing issues related to solute mass and energy balance.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Clathrate hydrates in the solar system

Clathrate hydrates are crystalline compounds in which an expanded ice lattice forms cages that contain gas molecules. There are two principal hydrate structures. Structure I, with a 12 A cubic unit cell, contains 46 water molecules and 8 cages of two types, giving an ideal formula (for CH4) of CH4.5.75H2O. The actual formula contains somewhat more water as the cages are not completely filled. Other examples that form Structure I hydrates are C2H6, C2H4, C2H2, CO2, SO2, OCS, Xe, H2S. Structure II, with a 17 A cubic unit cell, contains 136 water molecules, and 8 large and 16 small cages. The ideal formula for CHCl3 is CHCL3.17H2O. Other examples of Structure II hydrates include C3H8, C2H5Cl, acetone, and tetrahydrofuran. Small molecules such as Ar, Kr and probably N2 and O2 also form a Structure II hydrate. The small molecules occupy both the large and small cages, giving an ideal formula of Ar.5.67H2O. The conditions of pressure and temperature for hydrate formation are discussed.

Miller, S. L.↗
DOE OSTI2020

Correlating dynamic microstructure to observed color in electrophoretic displays via in situ small-angle x-ray scattering

Electrophoretic deposition (EPD) is an industrially relevant and scalable technique used to form particle deposits from colloidal suspensions. Highly concentrated particle suspensions generally prevent real-time in situ microscopy observations which limit the characterization of EPD films to ex situ, or postprocessed, laboratory techniques. For dynamic systems, such as tunable amorphous photonic crystals (APCs), only reversible deposits are formed during the EPD process. Since reversible deposits cannot be characterized with standard ex situ methods, the particle-particle and particle-field interactions that govern the displayed color and crystallinity of these systems are not well understood. In this paper, we present in situ small-angle x-ray scattering and UV-Vis techniques for measuring both the structural and optical response of an APC under applied electric fields. Furthermore, we also develop a computational model based on colloidal interactions to explain the observed change in the interparticle spacing of APCs due to the applied electric field which correlates to displayed color. Ultimately, this work provides a new in situ characterization method that could be expanded for other dynamic, tunable colloidal systems.

36 MATERIALS SCIENCE↗
NASA NTRS2016

Connecting the Interstellar Gas and Dust Properties in Distant Galaxies Using Quasar Absorption Systems

Gas and dust grains are fundamental components of the interstellar medium and significantly impact many of the physical processes driving galaxy evolution, such as star-formation, and the heating, cooling, and ionization of the interstellar material. Quasar absorption systems (QASs), which trace intervening galaxies along the sightlines to luminous quasars, provide a valuable tool to directly study the properties of the interstellar gas and dust in distant, normal galaxies. We have established the presence of silicate dust grains in at least some gas-rich QASs, and find that they exist at higher optical depths than expected for diffuse gas in the Milky Way. Differences in the absorption feature shapes additionally suggest variations in the silicate dust grain properties, such as in the level of grain crystallinity, from system-to-system. We present results from a study of the gas and dust properties of QASs with adequate archival IR data to probe the silicate dust grain properties. We discuss our measurements of the strengths of the 10 and 18 micron silicate dust absorption features in the QASs, and constraints on the grain properties (e.g., composition, shape, crystallinity) based on fitted silicate profile templates. We investigate correlations between silicate dust abundance, reddening, and gas metallicity, which will yield valuable insights into the history of star formation and chemical enrichment in galaxies.

Aller, Monique C.↗
DOE OSTI2020

Itinerant ferromagnetism and intrinsic anomalous Hall effect in amorphous iron-germanium

The amorphous iron-germanium system ( a - Fe x Ge 1 - x ) lacks long-range structural order and hence lacks a significant Brillouin zone. The magnetization of a - Fe x Ge 1 - x is well explained by the Stoner model for Fe concentrations x above the onset of magnetic order around x = 0.4 , indicating that the local order of the amorphous structure preserves the spin-split density of states of the Fe- 3 d states sufficiently to polarize the electronic structure despite k being a bad quantum number. Measurements reveal an enhanced anomalous Hall resistivity ρ x y AH relative to crystalline FeGe; this ρ x y AH is compared to density-functional theory calculations of the anomalous Hall conductivity to resolve its underlying mechanisms. The intrinsic mechanism, typically understood as the Berry curvature integrated over occupied k states but shown here to be equivalent to the density of curvature integrated over occupied energies in aperiodic materials, dominates the anomalous Hall conductivity of a - Fe x Ge 1 - x ( 0.38 ≤ x ≤ 0.61 ). The density of curvature is the sum of spin-orbit correlations of local orbital states and can hence be calculated with no reference to k space. This effect and the accompanying Stoner-like model for the intrinsic anomalous Hall conductivity establish a unified understanding of the underlying physics of the anomalous Hall effect in both crystalline and disordered systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Testing of Crystalline Silicotitanate to Support Tank-Side Cesium Removal System Operations - 20458

The direct feed of waste from the Hanford tank farms to the Low-Activity Waste Facility at the Hanford Waste Treatment and Immobilization Plant requires an intermediate treatment step that prepares the waste for vitrification. Washington River Protection Solutions (WRPS) selected a near-tank treatment system known as the Tank-Side Cesium Removal (TSCR) system to perform the required intermediate treatment functions. The approach in the TSCR system is to filter waste supernatant with a sintered metal dead-end filter and then use a series of ion exchange columns to remove cesium; this system has several similarities to the Tank Closure Cesium Removal system that has been deployed on the Savannah River Site. The ion exchange media proposed for use is crystalline silicotitanate (CST), which is a non-elutable media with a high affinity for cesium. Because the media is non-elutable, loaded columns will be blown down with compressed air, moved into interim storage, and replaced with new columns when cesium capacity is reached. The assumed extent and rate of drying that could be achieved in the TSCR column geometry lacked confirmation by experimental data. In addition, once the columns are loaded with cesium, they generate flammable gases (primarily hydrogen) via radiolysis acting on any resident liquids, i.e., moisture, remaining in the media bed. An assessment of available information on CST concluded that gas generation data that bounds expected operational conditions were needed to support the TSCR system safety basis and planned operations. Working with WRPS, Pacific Northwest National Laboratory (PNNL) designed and conducted testing with CST media to address the need for (a) representative in-column drying data, and (b) bounding flammable gas generation data. Drying testing was performed using a full-height column with a diameter of approximately 2 inches with injected air at temperatures of 18 deg. C and 30 deg. C. Gas generation testing was conducted in an engineered bunker that allowed simultaneous irradiation of up to eight samples at a time. These two experimental approaches used at PNNL for the CST testing are summarized and the major outcomes are presented. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Predicting Pulsed-Laser Deposition SrTiO 3 Homoepitaxy Growth Dynamics Using High-Speed Reflection High-Energy Electron Diffraction

Pulsed-laser deposition (PLD) is a powerful technique for growing complex oxides with controlled stoichiometry. To understand growth dynamics therein, it is common to leverage in situ spectroscopies, such as reflection high-energy electron diffraction (RHEED), to monitor surface crystallinity. Most commercial systems rely on video-rate cameras operating at 60-120 Hz that lack sufficient temporal resolution to capture growth dynamics at practical deposition frequencies. Here, a high-speed platform to record in situ dynamics via RHEED at >500 Hz is implemented. An open-source analysis package is designed to fit diffraction spots to 2D Gaussians, allowing single-pulse surface reconstruction kinetics extraction. Using homoepitaxially deposited (001)-oriented SrTiO 3 as a model system, we demonstrate how high-speed RHEED can provide real-time insight into growth processes obscured by slower acquisition systems. By fitting the single-pulse intensity to a set of exponential functions, we observe changes in the characteristic decay time and mechanism correlated to the substrate step width and surface termination. We observe distinct surface effects, with diffraction intensity decaying on lower-energy TiO 2 -terminated surfaces and stabilizing on SrO- or mixed-terminated surfaces. Similarly, using an exponential model, the extracted characteristic time of adatom deposition decreases with increased density of bonding sites associated with mixed termination and narrower step widths. Ultimately, this work shows how increasing RHEED temporal resolution can uncover new insights into growth processes, with practical implications for the design and control of PLD processes. This experimental platform provides new capabilities to enable data-driven machine learning analysis and autonomous control systems to enhance the complexity and fecundity of PLD.

(SrO)↗