Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coupled inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Radiation of cylindrical duct acoustic modes with flow mismatch

Motivated by the problem of Mach number and temperature discontinuity mismatch between the tailpipe and the surrounding medium, and the effect of this flow mismatch on aircraft engine noise, the radiation of spinning turbo-acoustic modes from a round duct is investigated. The model, based on a plug flow exhaust jet, solves the convected wave equations using Fourier transforms, inversion being accomplished via a coupled Wiener-Hopf and Carrier-Koiter technique. It is concluded that the Mach number discontinuity results in a conflict between convection and refraction effects, while the temperature mismatch results in a sharp beaming of sound off to the side.

Savkar, S. D.↗
NASA NTRS1995

Thermal remote sensing of surface soil water content with partial vegetation cover for incorporation into climate models

This study outlines a method for the estimation of regional patterns of surface moisture availability (M(sub 0)) and fractional vegetation (Fr) in the presence of spatially variable vegetation cover. The method requires relating variations in satellite-derived (NOAA, Advanced Very High Resolution Radiometer (AVHRR)) surface radiant temperature to a vegetation index (computed from satellite visible and near-infrared data) while coupling this association to an inverse modeling scheme. More than merely furnishing surface soil moisture values, the method constitues a new conceptual and practical approach for combining thermal infrared and vegetation index measurements for incorporating the derived values of M(sub 0) into hydrologic and atmospheric prediction models. Application of the technique is demonstrated for a region in and around the city of Newcastle upon Tyne situated in the northeast of England. A regional estimate of M(sub 0) is derived and is probabbly good for fractional vegetation cover up to 80% before errors in the estimated soil water content become unacceptably large. Moreover, a normalization scheme is suggested from which a nomogram, `universal triangle,' is constructed and is seen to fit the observed data well. The universal triangle also simplifies the inclusion of remotely derived M(sub 0) in hydrology and meteorological models and is perhaps a practicable step toward integrating derived data from satellite measurements in weather forecasting.

Gillies, Robert R.↗
NASA NTRS1986

Application of viscous-inviscid interaction methods to transonic turbulent flows

Two different viscous-inviscid interaction schemes were developed for the analysis of steady, turbulent, transonic, separated flows over axisymmetric bodies. The viscous and inviscid solutions are coupled through the displacement concept using a transpiration velocity approach. In the semi-inverse interaction scheme, the viscous and inviscid equations are solved in an explicitly separate manner and the displacement thickness distribution is iteratively updated by a simple coupling algorithm. In the simultaneous interaction method, local solutions of viscous and inviscid equations are treated simultaneously, and the displacement thickness is treated as an unknown and is obtained as a part of the solution through a global iteration procedure. The inviscid flow region is described by a direct finite-difference solution of a velocity potential equation in conservative form. The potential equation is solved on a numerically generated mesh by an approximate factorization (AF2) scheme in the semi-inverse interaction method and by a successive line overrelaxation (SLOR) scheme in the simultaneous interaction method. The boundary-layer equations are used for the viscous flow region. The continuity and momentum equations are solved inversely in a coupled manner using a fully implicit finite-difference scheme.

Lee, D.↗
DOE OSTI2022

Inverse Faraday effect in Mott insulators

The inverse Faraday effect (IFE), where a static magnetization is induced by circularly polarized light, offers a promising route to ultrafast control of spin states. Here we study the IFE in Mott insulators using the Floquet theory. We find two distinct IFE behavior governed by the inversion symmetry. In the Mott insulators with inversion symmetry, we find that the effective magnetic field induced by the IFE couples ferromagnetically to the neighboring spins. While for the Mott insulators without inversion symmetry, the effective magnetic field due to IFE couples antiferromagnetically to the neighboring spins. We apply the theory to the spin-orbit coupled single- and multiorbital Hubbard model that is relevant for the Kitaev quantum spin liquid material and demonstrate that the magnetic interactions can be tuned by light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRSDate not supplied

Impact Of Rotation on the Sun’s Subsurface Structure

It is well known that the dynamical evolution of subsurface flows of the Sun and magnetic fields is strongly linked to rotation. Observational investigation of sub surface structuring and dynamics can be performed only with relatively low resolution using helioseismic inversion techniques. To confidently model the coupling of turbulent convection, magnetic fields, and rotation in the solar interior, we perform advanced radiative hydrodynamic and MHD modeling of local scales. To explore the coupling effects in the upper layers of the convection zone, we present results of analysis from a series of hydrodynamic simulations performed for a 25-Mm-deep computational domain at different latitudes obtained for 1) the Carrington rotation rate at all latitudes and 2) the realistic rotation rate from the global helioseismic inversions during the solar minimum. Using additional 3D radiative hydrodynamic models, we reveal how physical properties of the solar convection are affected by rotation.

Heliophysics↗
DOE OSTI2021

Optimization of the Growth of the Van der Waals Materials Bi 2 Se 3 and (Bi 0.5 In 0.5 ) 2 Se 3 by Molecular Beam Epitaxy

The naturally existing chalcogenide Bi 2 Se 3 is topologically nontrivial due to the band inversion caused by the strong spin-orbit coupling inside the bulk of the material. Here, the surface states are spin polarized, protected by the time-inversion symmetry, and thus robust to the scattering caused by nonmagnetic defects. A high-purity topological insulator thin film can be easily grown via molecular beam epitaxy (MBE) on various substrates to enable novel electronics, optics, and spintronics applications. However, the unique surface state properties have historically been limited by the film quality, which is evaluated by crystallinity, surface morphology, and transport data. Here we propose and investigate different MBE growth strategies to improve the quality of Bi 2 Se 3 thin films grown by MBE. Based on the surface passivation status, we have classified the substrates into two categories, self-passivated or unpassivated, and determine the optimal growth mechanisms on the representative sapphire and GaAs, respectively. For Bi 2 Se 3 on GaAs, the surface passivation status determines the dominant growth mechanism. In the end, growths of the topological trivial insulator (Bi 0.5 In 0.5 ) 2 Se 3 (BIS) on GaAs are investigated following the protocols proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Influence of Shallow Subsurface Properties on Particle Motion in Acoustic-Seismic Coupling

Atmospheric acoustic waves transmit energy into the solid Earth through air-to-ground coupling. These waves are recorded by seismic sensors and provide insight into both atmospheric phenomena and subsurface properties. Interpreting these signals is often challenging because they are modulated by subsurface structure and the incidence angle of the acoustic wave. This study examines acoustic--seismic coupling generated by the 2012 Camp Minden Explosion, which was recorded by hundreds of seismoacoustic stations. We apply a novel technique to quantify the seismic particle motion, model coupled waves with a propagator matrix approach, and apply a Bayesian inversion to infer properties of the shallow subsurface. Our analysis reveals that prograde motion is widespread and focused in low shear-wave velocity regions, such as the Mississippi Embayment, and retrograde motion is more common in higher shear-velocity areas. Inversion results at some stations produce plausible subsurface models with strong waveform fits, while inversions at other sites are less successful. These results indicate prograde particle motion in air-to-ground coupled waves is more prevalent than previously recognized and may serve as a diagnostic for shallow velocity structure. Our comprehensive modeling and inversion framework provides a potential method to extract layered near-surface properties from acoustic-seismic coupling observations.

58 GEOSCIENCES↗
DOE OSTI2022

Evidence for a single-layer van der Waals multiferroic

Here we searched for signatures of type-II multiferroic order in ultrathin van der Waals materials, to determine if such a state, comprising coexisting electrical polarization and spin order with strong magnetoelectric effects, could persist down to a single-atomic layer. We reported the first observation of such a state in triangular lattice material NiI 2 . This system has a layered structure and built-in magnetic frustration that promotes a complex magnetic ground state with proper-screw spin helices. The spin helix pattern breaks inversion symmetry and induces electrical polarization via magnetoelectric coupling. We use circular dichroic Raman measurements to directly probe the magneto-chiral ground state and its electromagnon modes originating from dynamic magnetoelectric coupling. Using birefringence and second-harmonic generation measurements, we detect a highly anisotropic electronic state simultaneously breaking three-fold rotational and inversion symmetry. The evolution of the optical signatures as a function of temperature and layer number surprisingly revealed a multiferroic state that persists down to the ultrathin limit of monolayer NiI 2 . These observations establish NiI 2 and transition metal dihalides as a new platform for studying emergent multiferroic phenomena, chiral magnetic textures and ferroelectricity in the 2D limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Topological band gap in intercalated epitaxial graphene

The study of functional manipulation of graphene is a critical subject, both for fundamental research and practical applications. In this study, we present that the intercalation of 5d transition metals into epitaxial graphene on SiC is a promising strategy for the realization of topologically nontrivial phases with a finite band gap in graphene. Employing first-principles calculations, grounded in density functional theory, we demonstrate that Re- and Ta-intercalated graphene evolve into two-dimensional topological insulators. These exhibit linear Dirac cones and quadratic bands with topological band gaps, respectively. The emergence of these topological states is attributed to the strong spin–orbit coupling strength of the intercalants. We show that the corresponding topological edge states persist within the finite bulk band gap, aligning with the bulk-boundary correspondence. Furthermore, we explore the spin splitting of the band structure, brought about by the inversion symmetry breaking and the spin–orbit coupling. Finally, our study underscores that the intercalation of graphene is an effective and a feasible approach for manipulating the band gap and the topological nature of graphene. Such intercalated graphene systems hold potential utility for spintronics and low-dimensional quantum device applications.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Earthquake source mechanisms from body-waveform inversion and intraplate tectonics in the northern Indian Ocean

Double-couple point-source parameters for 11 of the largest intraplate earthquakes in the northern Indian Ocean during the last 20 years were determined from a formal inversion of the long-period P and SH waveforms. Two major intraplate tectonic provinces are distinguished in the northern Indian Ocean. The plate-wide stress pattern found and the high level of intraplate seismicity are probably the results of substantial resistance, along the Himalayan continental collision zone, to the continued northward motion of the western portion of the Indian plate.

Bergman, E. A.↗
DOE OSTI2023

The Dependence of Climate Sensitivity on the Meridional Distribution of Radiative Forcing

Abstract This study investigates how climate sensitivity depends upon the spatial pattern of radiative forcing. Sensitivity experiments using a coupled ocean‐atmosphere model were conducted by adding anomalous incoming solar radiation over the entire globe, Northern Hemisphere mid‐latitudes, Southern Ocean, and tropics. The varied forcing patterns led to highly divergent climate sensitivities. Specifically, the climate is nearly twice as sensitive to Southern Ocean forcing as tropical forcing. Strong coupling between the surface and free troposphere in the tropics increases the inversion strength, leading to smaller cloud feedback in the tropical forcing experiments. In contrast, the extratropics exhibit weaker coupling, a decrease or near‐zero change in the inversion strength, and strong positive cloud feedback. These results contrast with the conventional SST‐pattern effect in which tropical surface temperature changes regulate climate sensitivity. They also have important implications for other potentially asymmetric forcings, such as those from geoengineering, volcanic eruptions, and paleoclimatic changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Unconventional supercurrent phase in Ising superconductor Josephson junction with atomically thin magnetic insulator

Abstract In two-dimensional (2D) NbSe 2 crystal, which lacks inversion symmetry, strong spin-orbit coupling aligns the spins of Cooper pairs to the orbital valleys, forming Ising Cooper pairs (ICPs). The unusual spin texture of ICPs can be further modulated by introducing magnetic exchange. Here, we report unconventional supercurrent phase in van der Waals heterostructure Josephson junctions (JJs) that couples NbSe 2 ICPs across an atomically thin magnetic insulator (MI) Cr 2 Ge 2 Te 6 . By constructing a superconducting quantum interference device (SQUID), we measure the phase of the transferred Cooper pairs in the MI JJ. We demonstrate a doubly degenerate nontrivial JJ phase ( ϕ ), formed by momentum-conserving tunneling of ICPs across magnetic domains in the barrier. The doubly degenerate ground states in MI JJs provide a two-level quantum system that can be utilized as a new dissipationless component for superconducting quantum devices. Our work boosts the study of various superconducting states with spin-orbit coupling, opening up an avenue to designing new superconducting phase-controlled quantum electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The Dirac equation as a model of topological insulators

The Dirac equation with a spatially dependent mass can be used as a simple, exactly soluble, continuum model of a three-dimensional Topological Insulator. For a bulk system, the sign of the mass determines the parity at the only time-reversal point ( k _ = 0 ) and, thus, leads to the designation of the bulk as being topologically trivial or non-trivial. Since the mass changes sign at the interface between a topologically trivial and non-trivial materials, topological surface states appear on that boundary. We present that electron scattering experiments may provide an alternate probe of the topological character of the surface states. For infinitely thick slabs, the states on the opposite sides of the slab decouple. The spatial decoupling results in the surface states become gapless, non-degenerate and, due to the Rashba spin–orbit coupling generated by the loss of inversion symmetry, exhibit spin-momentum locking. We review several characteristic properties of the topological surface states which are dependent on the topological quantum numbers and show that, using this model, they can be calculated exactly using simple approaches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Interacting fermions in narrow-gap semiconductors with band inversion

Abstract Highly unconventional behavior of the thermodynamic response functions has been experimentally observed in a narrow gap semiconductor samarium hexaboride. Motivated by these observations, we use renormalization group technique to investigate many-body instabilities in the f -orbital narrow gap semiconductors with band inversion in the limit of weak coupling. By projecting out the double occupancy of the f -states we formulate a low-energy theory describing the interacting particles in two hybridized electron- and hole-like bands. The interactions are assumed to be weak and short-ranged. We take into account the difference between the effective masses of the quasiparticles in each band. Upon carrying out the renormalization group analysis we find that there is only one stable fixed point corresponding to the excitonic instability with time-reversal symmetry breaking for small enough mismatch between the effective masses.

Physics↗
DOE OSTI2020

Semimetal–Mott insulator quantum phase transition of the Hubbard model on the honeycomb lattice

We take advantage of recent improvements in the grand canonical hybrid Monte Carlo algorithm, to perform a precision study of the single-particle gap in the hexagonal Hubbard model, with on-site electron-electron interactions. After carefully controlled analyses of the Trotter error, the thermodynamic limit, and finite-size scaling with inverse temperature, we find a critical coupling of U c /κ = 3.834(14) and the critical exponent zν = 1.185(43). Under the assumption that this corresponds to the expected antiferromagnetic Mott transition, we are also able to provide a preliminary estimate β = 1.095(37) for the critical exponent of the order parameter. We consider our findings in view of the SU(2) Gross-Neveu, or chiral Heisenberg, universality class. Here, we also discuss the computational scaling of the hybrid Monte Carlo algorithm, and possible extensions of our work to carbon nanotubes, fullerenes, and topological insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Pressure Transient Analyses and Poroelastic Modeling of Hydraulic Fracture Dilation for Multiple Injections at the Devine Fracture Pilot Site

Our team has conducted electromagnetic (EM) surveys for the past six years to monitor hydraulic-fracture behavior at the Devine Fracture Pilot Site (DFPS). The sub-horizontal orientation of a shallow hydraulic fracture at the DFPS provides uniform access to the fracture area for interrogation and data collection. Ahmadian et al. (2023) suggested a possible correlation between spatiotemporal changes in the flow rate, bottomhole pressure (BHP), and the observed surface recorded electric field at the DFPS. In this paper, we present the development of poroelastic forward models and pressure transient analyses (PTAs) to support the development of a multiphysics inverse model for these EM surveys. First, we conducted PTAs of the shut-in periods after six injections out of 10 to determine the fracture closure pressure (FCP) or the overburden pressure used in a poroelastic fracture reopening model. Second, we developed a finite-element poroelastic model throughout five injection cycles to include the effect of the cumulative injected volumes due to the previous injections on current fracture dilation in the presence of highly permeable unpropped and propped zones adjacent to the cohesive layer that models fracture reopening. Fracture reopening in this poroelastic model is based on a calibrated traction-separation response using the bottomhole pressure collected in two injection campaigns in 2020 and 2022. We used the outcomes of a previous simulation study of the primary hydraulic-fracturing stimulation to define the dimension of an unpropped fracture zone ahead of the propped fracture area. The PTAs led to FCPs consistent with those obtained using the injection data collected at the DFPS in 2020. Further, these analyses showed that at later injections, the fracture closure occurred at a later time with respect to the shut-in time, inferring the effect of cumulative injected volumes in previous injections. The simulation results show that considering the propped and unpropped fracture zones improves our poroelastic model in predicting the injection-well BHP. The numerical simulation results demonstrate a significant excess pore pressure near the fracture because of the preceding formation loadings by the previous injections. The obtained fracture dilation area and fluid pressure distribution provide a basis to improve the development of a multiphysics inverse model. Furthermore, in an iteratively coupled scheme, this pressure distribution can be introduced into EM models to render a holistic view of the causative mechanisms for the surface signal anomalies.

02 PETROLEUM↗
DOE OSTI2021

Frequency Comb-Based Remote Methane Observation Network (Final Scientific/Technical Report)

ARPA-E investment in long-range, frequency comb-based methane detection has resulted in the first scalable, cost-effective continuous methane emissions system. At the onset of this ARPA-E MONITOR award, the dual-frequency comb spectrometer was a sprawling, expensive, laboratory-confined device which had only recently been demonstrated capable of measuring atmospheric trace gases over open-paths. Bringing the technology to the point of being able to monitor for and characterize methane emissions at oil and natural gas production facilities seemed an almost impossible task. Over the subsequent months and years, our team transitioned the Nobel-prize-winning frequency-comb-laser spectrometer technology to a field-deployed regional methane leak detection system. The spectrometer enables highly sensitive near-infrared absorption measurements of methane along kilometer-scale laser beam paths. The measurements are coupled with an atmospheric modeling and inversion framework to triangulate the location of emission sources and quantify the emission rates.

03 NATURAL GAS↗
NASA NTRS2016

Overview of the CHarring Ablator Response (CHAR) Code

An overview of the capabilities of the CHarring Ablator Response (CHAR) code is presented. CHAR is a one-, two-, and three-dimensional unstructured continuous Galerkin finite-element heat conduction and ablation solver with both direct and inverse modes. Additionally, CHAR includes a coupled linear thermoelastic solver for determination of internal stresses induced from the temperature field and surface loading. Background on the development process, governing equations, material models, discretization techniques, and numerical methods is provided. Special focus is put on the available boundary conditions including thermochemical ablation, surface-to-surface radiation exchange, and flowfield coupling. Finally, a discussion of ongoing development efforts is presented.

Amar, Adam J.↗