Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordinate system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

High- and Mid-Fidelity Modeling Comparison for a Floating Marine Turbine System

There is a lack of suitable numerical tools, particularly open-source tools, that can be used for designing and optimizing marine turbine systems. The National Renewable Energy Laboratory has added features to their widely used mid-fidelity wind turbine modeling code, OpenFAST, to enable modeling of axial-flow marine turbines. This necessitated the addition of several physical effects relevant to marine turbines that are neglected for wind turbines. These include buoyancy, added mass and inertial loads, wave-current superposition, and changes to the coordinate systems. This updated version of OpenFAST allows for the modeling of both fixed and floating marine turbines at a speed comparable to real time. While efficient for large sets of load cases and design studies, mid-fidelity codes make simplifying assumptions that may impact their accuracy. High-fidelity computational fluid dynamics (CFD) simulations can capture more flow effects with fewer assumptions and provide detailed body pressure mapping and flow-field information. It is important to compare predictions between mid-fidelity and high-fidelity codes, both to verify the models and to understand the limitations. A floating marine turbine system was modeled both with OpenFAST and with the commercial CFD code STAR-CCM+. The CFD model used a three-dimensional unsteady Reynolds-averaged Navier-Stokes solver for a volume-of-fluid numerical wave and current tank. The blade-resolved simulations used the sliding-interface technique for the spinning rotor and an overset grid to accommodate the rigid-body motion of the floating system. The mooring system was modeled with a custom coupling of the CFD solver with the open-source code MoorDyn. This improves upon the existing quasi-static catenary solver in STAR-CCM+, which lacks seabed contact or line-to-line connections. Simulation results for a floating marine turbine are compared between OpenFAST and CFD, highlighting the capabilities of the mid-fidelity code and identifying the areas where a high-fidelity approach is needed.

CFD↗
DOE OSTI2022

Derivation of closed-form ellipsoidal X-ray mirror shapes from Fermat's principle

Ellipsoidal and plane-elliptical surfaces are widely used as reflective, point-to-point focusing elements in many optical systems, including X-ray optics. Here the classical optical path function approach of Fermat is applied to derive a closed-form expression for these surfaces that are uniquely described by the object and image distances and the angle of incidence at a point on a mirror surface. A compact description facilitates design, modeling, fabrication, and testing to arbitrary accuracy. Congruent surfaces in two useful coordinate systems — a system centered on the ellipsoid's axes of symmetry and a mirror-centered or `vertex' system with the surface tangent to the xy plane at the mirror's center — are presented. Expressions for the local slope and radii of curvature are derived from the result, and the first several terms of the Maclauren series expansion are provided about the mirror center.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

High- and Mid-Fidelity Modeling Comparison for a Floating Marine Turbine System: Preprint

There is a lack of suitable numerical tools, particularly open-source tools, that can be used for designing and optimizing marine turbine systems. The National Renewable Energy Laboratory (NREL) has added features to their widely used mid-fidelity wind turbine modeling code, OpenFAST, to enable modeling of axial flow marine turbines. This necessitated the addition of several physical effects relevant to marine turbines that can be neglected for wind turbines. These include buoyant loads, added mass and inertia loads, wave-current superposition, and changes to the coordinate systems. This updated version of OpenFAST allows for the modeling of both fixed and floating marine turbine systems at a speed comparable to real time. While efficient for long simulations, large sets of load cases, and design studies, mid-fidelity codes cannot capture all of the potentially important physical phenomenon impacting marine turbine systems. High-fidelity computational fluid dynamics (CFD) simulations can capture more flow effects with fewer assumptions and provide detailed body pressure mapping and flow-field information. It is important to compare predictions between mid-fidelity and high-fidelity codes, both to verify the models and to understand the limitations. A floating marine turbine system designed by NREL was modeled both with OpenFAST and with the commercial CFD code, STARCCM+. The CFD model used a 3-D unsteady Reynolds-averaged Navier-Stokes solver for a volume-of-fluid numerical wave and current tank. The blade-resolved simulations used the sliding-interface technique for the spinning rotor and an overset grid to accommodate the rigid-body motion of the floating system. The mooring system was modelled with a custom coupling of the CFD solver with the open-source code, MoorDyn. This improves upon the existing quasi-static catenary solver in STARCCM+, which lacks seabed contact or line-to-line connections. Spatial and temporal convergence studies were conducted. The simulation results for a combined current and wave condition are compared between OpenFAST and CFD, highlighting the capabilities of the mid-fidelity code and identifying the areas where a high-fidelity approach is needed.

CFD↗
DOE OSTI2025

QM Investigation of Rare Earth Ion Interactions with First Hydration Shell Waters and Protein-Based Coordination Models

Here, conventional methods for extracting rare earth metals (REMs) from mined mineral ores are inefficient, expensive, and environmentally damaging. Recent discovery of lanmodulin (LanM), a protein that coordinates REMs with high-affinity and selectivity over competing ions, provides inspiration for new REM refinement methods. Here, we used quantum mechanical (QM) methods to investigate trivalent lanthanide cation (Ln 3+ ) interactions with coordination systems representing bulk solvent water and protein binding sites. Energy decomposition analysis (EDA) showed differences in the energetic components of Ln 3+ interaction with representatives of solvent (water, H 2 O) and protein binding sites (acetate, CH 3 COO – ), highlighting the importance of accurate description of electrostatics and polarization in computational modeling of REM interactions with biological and bioinspired molecules. Relative binding free energies were obtained for Ln 3+ with coordination complexes originating from binding sites in PDB structures of a lanthanum binding peptide (PDB entry 7CCO) and LanM, with explicit consideration of the first hydration shell waters, according to quasi-chemical theory (QCT). Beyond the first shell, the bulk solvent environment was represented with an implicit continuum model. Ln 3+ interactions with (H 2 O) 9 and both binding site models became more favorable, moving down the periodic series. This trend was more pronounced with the protein binding site models than with water, resulting in affinity increasing with periodic number, except for the last REM, Lu 3+ , which bound less favorably than the preceding element, Yb 3+ . Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. Conversely, the previously reported experimental data for LanM show a preference for the earlier lanthanides; this is likely due to longer-range interactions and cooperative effects, which are not represented by the reduced models. Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. In contrast to the previously reported experimental data for LanM, the peptide preferentially binds the earlier lanthanides. This difference likely arises due to longer-range interactions and cooperative effects not represented by the peptide. Further investigation of Ln 3+ interactions with whole proteins using polarizable molecular mechanics models with explicit solvent is warranted to understand the influence of longer-ranged interactions, cooperativity, and bulk solvent. Nevertheless, the present work provides new insights into Ln 3+ interactions with biomolecules and presents an effective computational platform for designing specific single-site REM binding peptides more efficiently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pressure–strain interaction. II. Decomposition in magnetic field-aligned coordinates

In weakly collisional and collisionless magnetized plasmas, the pressure–strain interaction describes the rate of conversion between bulk flow and thermal energy density. In this study, we derive an analytical expression for the pressure–strain interaction in a coordinate system with an axis aligned with the local magnetic field. The result is eight groups of terms corresponding to different physical mechanisms that can contribute to the pressure–strain interaction. We provide a physical description of each term. Here, the results are immediately of interest to weakly collisional and collisionless magnetized plasmas and the fundamental processes that happen therein, including magnetic reconnection, magnetized plasma turbulence, and collisionless shocks. The terms in the field-aligned coordinate decomposition are likely accessible to measurement with satellite observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Radial coordinate maps, radial vectors, and binormal vectors for 5/6, 5/5 and 5/4 edge island domains in W7-X

Abstract The edge island domain in Wendelstein 7-X consists of divertor islands whose position coincide with the location of rational values of the rotational transform - ι ≈ ( 5 / 6 , 5 / 5 , 5 / 4 ) and surround the main confinement volume (the ‘main plasma’), providing the magnetic topology for an island divertor. The 5/5 edge consists of five individual islands that are unconnected. In contrast, a single island connects onto itself after 6 or 4 toroidal transits in the 5/6 or 5/4 edge, respectively. Many interesting phenomena are related to these islands and diagnostic analyses require a mapping from ‘laboratory’ or real space coordinates to the island coordinate system (ICS). A procedure is described here to calculate several scalar and vector quantities for closed island structures which can be utilized in fast interpolation schemes for inverse maps. For the 5/5 edge, a fixed-boundary vacuum (zero beta) magneto-hydrodynamic solution of the 5/5 island is found with the Variational Moments Equilibrium Code, VMEC. The solution is compatible with already existing routines which determine the radial and binormal vectors of VMEC solutions at arbitrary laboratory coordinates. VMEC does not support solutions for the 5/4 and 5/6 islands, but the radial and binormal vectors are available in a local 2D Fourier ICS.

Physics↗
DOE OSTI2020

The Athena++ Adaptive Mesh Refinement Framework: Design and Magnetohydrodynamic Solvers

The design and implementation of a new framework for adaptive mesh refinement calculations are described. It is intended primarily for applications in astrophysical fluid dynamics, but its flexible and modular design enables its use for a wide variety of physics. The framework works with both uniform and nonuniform grids in Cartesian and curvilinear coordinate systems. It adopts a dynamic execution model based on a simple design called a "task list" that improves parallel performance by overlapping communication and computation, simplifies the inclusion of a diverse range of physics, and even enables multiphysics models involving different physics in different regions of the calculation. We describe physics modules implemented in this framework for both nonrelativistic and relativistic magnetohydrodynamics (MHD). These modules adopt mature and robust algorithms originally developed for the Athena MHD code and incorporate new extensions: support for curvilinear coordinates, higher-order time integrators, more realistic physics such as a general equation of state, and diffusion terms that can be integrated with super-time-stepping algorithms. The modules show excellent performance and scaling, with well over 80% parallel efficiency on over half a million threads. The source code has been made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Hybrid manufacturing of Invar mold for carbon fiber layup using structured light scanning

This paper describes coordinate system definition and transfer for five-axis machining of additively-manufactured preforms. In this method, a set of fiducials are attached to the temporarily attached to the part, and their location relative to the preform geometry is calibrated using a structured light scanner. Those fiducials can then be measured in the machine tool to determine the location and orientation of the part. The method is demonstrated by finish-machining a carbon fiber layup mold from an additively manufactured Invar preform. In addition to showing the coordinate transfer methods necessary to machine the part, several key challenges with machining additively-manufactured preforms are discussed and potential solutions are proposed. Unfortunately, the final part was ultimately unusable due to porosity inside the part left from the additive process. Future work will remanufacture this part while taking steps to avoid porosity and other challenges encountered.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interactive Web Application for Traffic Simulation Data Management and Visualization

As traffic simulation software becomes more effective for realistically simulating and analyzing traffic dynamics and vehicle interactions on the mesoscopic and microscopic level, the management, dissemination, and collaborative visualization of traffic simulation results produced by individual transportation planners presents a significant challenge. Existing online content management systems have a very limited capability in allowing users to query specific traffic simulation scenarios and geospatially visualize simulation results through shareable and interactive web interfaces. This paper presents a web-based application for promoting the archiving, sharing, and visualization of large-scale traffic simulation outputs. The application is developed to enhance cyber-physical controls, communications, and public education for collaborative transportation planning. Unique features of the web application include: (a) allowing users to upload their new traffic simulation scenarios (parameters and outputs), as well as search existing scenarios using easily accessible interfaces; (b) optimizing simulation output files with heterogeneous data formats and projected coordinate systems for web-based storage and management using a scalable and searchable data/metadata standard; (c) standardizing user-uploaded simulation outputs using web interfaces and data processing libraries with parallel computing capacity; and (d) providing shareable web visual interfaces for visualizing the traffic flow and signal information stored in simulation outputs (e.g., regional traffic patterns and individual vehicle interactions) and visually comparing multiple simulation outputs both spatially and temporally. Furthermore, the paper presents the conceptual design and implementation of this application, and demonstrates the application’s performance for sharing, comparing, and visualizing simulation outputs from VISSIM and SUMO, two commonly used traffic simulation software programs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

Powering the Blue Economy: A Survey of Station-Keeping Methods for Mooringless Platforms

The term “ocean platform” is used to reference everything from stationary, typically moored, buoys to mobile water vehicles, whether they operate on the ocean’s surface or underwater. For certain applications for which relatively stationary station-keeping conditions are desired, the use of mooring systems is not always a viable alternative either for economic, environmental, regulatory, or otherwise practical reasons, or a combination thereof, (e.g., short deployments, sensitive ecosystems, very deep project sites). Maintaining a platform at a single waypoint or reference location without being moored would require additional control systems and a power source to counteract the drift forces that would naturally displace it. Mobile platforms, which are usually untethered except for remotely operated vehicles, typically require energy input to power their station-keeping capabilities so that they hold or control their location in the ocean. Currently, most of these platforms use combustion engines or batteries for this purpose, which, depending on the specific systems, may be costly, pollute the environment, or create limitations on the length of the deployment. However, powering this kind of platforms with surrounding renewable resources (waves, currents, winds, or sun) has been identified as a promising solution to expand their application. The intent of this report is to investigate station-keeping methods for various ocean platforms that are not moored or otherwise anchored to the ocean floor, or another platform or vessel, paying particular interest to technologies that use marine renewable resources to power their operation, because that is of particular interest to the U.S. Department of Energy’s Powering the Blue Economy (PBE) initiative. As a first step, 72 articles and technical reports related to mooringless station-keeping methods were collected for review. The preliminary literature review provided a broad overview of common themes across the literature from which a descriptive methodology for analyzing various platforms was developed. That is, station-keeping methods were categorized based on their predominant energy source and consumption (renewable, nonrenewable, or hybrid if the platform uses renewable and nonrenewable resources equally), and their localization strategy (drift reduction, “path-planning or “waypoint-holding”). In addition, platform types were segregated into the following groups: buoys, surface drifters, and unoccupied surface vehicles (USVs); offshore renewable energy systems; and unoccupied underwater vehicles (UUVs). The main types of station-keeping methods encountered in this report achieve their intended localization strategy by means of drift mitigation, steering, and/or propulsion. Drift mitigation is commonly accomplished via drogues and sea anchors. Stand-along steering subsystems use control surfaces (e.g., ship rudder, wing sail, etc.) that react to ocean currents, waves, or winds to provide varying-degrees of course adjustments. Combined steering and propulsion subsystems include differential thrusters, directional thrusters separate from a primary thruster that cause the platform to pitch up/down or yaw clockwise/counterclockwise, or vectored thrusters that direct the propulsion in a range of directions relative to the platform’s local coordinate system. Propulsion is often achieved by running a motor and applying active control strategies but can also involve buoyancy shifts and using sails to generate lifting forces that propel a platform in a desired direction. Future research is primarily expected to take place in the form of a technoeconomic analysis that would aim to determine the technological viability, cost, and added value of mooringless station-keeping use cases identified through this research, including docking for UUV recharging or for georeferencing drifter buoys, deep-sea floating wind farms, U.S. Navy sonar arrays, and a Pacific Ocean wave buoy network.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Practical Event Location Estimation Algorithm for Power Transmission System Based on Triangulation and Oscillation Intensity

Event location in power systems is quite essential information for system operators to enhance control-room situational awareness capability. Therefore, it is of great importance to develop an event location estimation algorithm for transmission systems with high accuracy. With the development of wide-area measurement system (WAMS) such as FNET/GridEye, and the synchrophasor measurement devices (SMDs) such as frequency disturbance recorders (FDRs), the synchronous measurement data including frequency, voltage amplitude and phase angle can be collected and used for event location estimation. First, the phase angle and rate of change of frequency (RoCoF) trajectories are respectively used for determining two sets of wave arrival time associated with each FDR. Then, a convolutional neural network (CNN) is utilized to determine the wave arrival order to select the more suitable set of wave arrival times for a given case and to perform corresponding modifications. Next, the oscillation intensity associated with each FDR is determined based on phase angle trajectories in the center of inertia (COI) coordinate system. Finally, the multiple criteria for event location estimation are represented. In conclusion, case studies and comparisons between the proposed and previous algorithms using actual and confirmed cases in U.S. power systems are performed to demonstrate the effectiveness and improvement of the proposed algorithm in practical applications.

frequency disturbance recorder (FDR)↗
DOE OSTI2024

Tracking the topology of neural manifolds across populations

Neural manifolds summarize the intrinsic structure of the information encoded by a population of neurons. Advances in experimental techniques have made simultaneous recordings from multiple brain regions increasingly commonplace, raising the possibility of studying how these manifolds relate across populations. However, when the manifolds are nonlinear and possibly code for multiple unknown variables, it is challenging to extract robust and falsifiable information about their relationships. We introduce a framework, called the method of analogous cycles, for matching topological features of neural manifolds using only observed dissimilarity matrices within and between neural populations. We demonstrate via analysis of simulations and in vivo experimental data that this method can be used to correctly identify multiple shared circular coordinate systems across both stimuli and inferred neural manifolds. Conversely, the method rejects matching features that are not intrinsic to one of the systems. Further, as this method is deterministic and does not rely on dimensionality reduction or optimization methods, it is amenable to direct mathematical investigation and interpretation in terms of the underlying neural activity. We thus propose the method of analogous cycles as a suitable foundation for a theory of cross-population analysis via neural manifolds.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Progress with the 5D full-F continuum gyrokinetic code COGENT

COGENT is an Eulerian gyrokinetic code being developed for edge plasma modelling. The code is distinguished by the use of a high-order finite-volume (conservative) discretization combined with mapped multi-block grid technology. Our recent work is focused on the development of a 5D full-F COGENT version.Anumerical algorithm utilizing locally a field-aligned multi-block coordinate system is implemented to facilitate simulations of highly anisotropic microturbulence in the presence of a strong magnetic shear. In this approach, the toroidal direction is divided into blocks such that,within each block, the cells are field-aligned and a non-matching (non-conformal) grid interface is allowed at the block boundaries. In this paper we report on details of the numerical implementation and present preliminary results of verification studies performed for the case of the ion temperature gradient (ITG) instability in a sheared toroidal annulus geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Development of an implicit electromagnetic capability for a hybrid gyrokinetic ion-fluid electron model

Here we report on the development and implementation of a hybrid kinetic ion–fluid electron model for electromagnetic COGENT simulations of edge plasmas. COGENT is a finite-volume gyrokinetic code that employs a locally field-aligned coordinate system combined with a mapped multi-block grid technology to handle strongly anisotropic edge plasma turbulence. The simulation model involves the long-wavelength limit of the ion gyrokinetic equation coupled to the vorticity and Ohm's law equations for the electromagnetic field perturbations. In order to handle the fast Alfvén wave time scales, an implicit-explicit time integration approach with a physics-based preconditioner is used. The model is successfully applied to the simulations of ion-scale resistive-drift ballooning turbulence in a toroidal annulus geometry. Substantial speed-up over a fully explicit time integration approach is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Hybrid large-eddy simulation with adaptive downstream anisotropic eddy viscosity model

Turbulence pervades most flows of engineering interest, and its prediction remains a challenge on both accuracy and cost. One promising predictive approach that reduces cost combines large-eddy simulation (LES) with simulation based on Reynolds averaged Navier–Stokes equations (RANS). This study presents a method to overcome stability and accuracy issues associated with these hybrid LES-RANS methods. The method developed involves extracting the Reynolds stresses from the upstream LES solution and then using that information to convert the downstream RANS model from a scalar eddy-viscosity model to an anisotropic nonlinear eddy-viscosity model. The method developed differs from the downstream tensorial eddy-viscosity model by being independent of the coordinate system. The method developed was evaluated by computing film cooling of a flat plate with the coolant injected through one row of circular holes. Results obtained show instabilities at the LES-to-RANS interface to be eliminated. Also, the method developed yielded solutions that compare reasonably well with those from LES, even though a significant portion of the flow is computed by the adapted anisotropic RANS model instead of LES, which significantly reduced the number of grid points and computational time needed. Since modification of the downstream RANS model is based on information extracted from the upstream LES solution, the method developed is adaptive to the problem being studied.

42 ENGINEERING↗
DOE OSTI2023

Two-particle angular correlations in e + e - collisions to hadronic final states in two reference coordinates at Belle

We present the analysis of two-particle angular correlations using coordinate systems defined with the conventional beam axis and the event thrust axis. We propose the latter as a good representation for the correlation structure interpretation in the e + e - collision system. The e + e - collisions to hadronic final states at center-of-mass energies of $\sqrt{s}$ = 10.52 GeV and 10.58 GeV are recorded by the Belle detector at KEKB. In this paper, results on the first dataset are supplementary to the previous Belle publication [1]. At the same time, the latter is the first two-particle correlation measurement at collision energy on the Υ(4S) resonance and is sensitive to its decay products. Measurements are reported as a function of the charged-particle multiplicity. Finally, a qualitative understanding of the correlation structure is discussed using a combination of Monte Carlo simulations and experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Algebraic branch points at all loop orders from positive kinematics and wall crossing

A bstract There is a remarkable connection between the boundary structure of the positive kinematic region and branch points of integrated amplitudes in planar $$ \mathcal{N} $$ N = 4 SYM. A long-standing question has been precisely how algebraic branch points emerge from this picture. We use wall crossing and scattering diagrams to systematically study the boundary structure of the positive kinematic regions associated with MHV amplitudes. The notion of asymptotic chambers in the scattering diagram naturally explains the appearance of algebraic branch points. Furthermore, the scattering diagram construction also motivates a new coordinate system for kinematic space that rationalizes the relations between algebraic letters in the symbol alphabet. As a direct application, we conjecture a complete list of all algebraic letters that could appear in the symbol alphabet of the 8-point MHV amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

SO(3)-invariance of informed-graph-based deep neural network for anisotropic elastoplastic materials

This work examines the frame-invariance (and the lack thereof) exhibited in simulated anisotropic elasto-plastic responses generated from supervised machine learning of classical multi-layer and informed-graph-based neural networks, and proposes different remedies to fix this drawback. The inherent hierarchical relations among physical quantities and state variables in an elasto-plasticity model are first represented as informed, directed graphs, where three variations of the graph are tested. While feed-forward neural networks are used to train path-independent constitutive relations (e.g., elasticity), recurrent neural networks are used to replicate responses that depends on the deformation history, i.e. or path dependent. In dealing with the objectivity deficiency, we use the spectral form to represent tensors and, subsequently, three metrics, the Euclidean distance between the Euler Angles, the distance from the identity matrix, and geodesic on the unit sphere in Lie algebra, can be employed to constitute objective functions for the supervised machine learning. In this, the aim is to minimize the measured distance between the true and the predicted 3D rotation entities. Following this, we conduct numerical experiments on how these metrics, which are theoretically equivalent, may lead to differences in the efficiency of the supervised machine learning as well as the accuracy and robustness of the resultant models. Neural network models trained with tensors represented in component form for a given Cartesian coordinate system are used as a benchmark. Our numerical tests show that, even given the same amount of information and data, the quality of the anisotropic elasto-plasticity model is highly sensitive to the way tensors are represented and measured. The results reveal that using a loss function based on geodesic on the unit sphere in Lie algebra together with an informed, directed graph yield significantly more accurate rotation prediction than the other tested approaches.

42 ENGINEERING↗