SEARCH · Engineering Papers

Results for “contour estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Influence of Strain-Gage Balance Characteristics on the Precision Error of the Drag Coefficient

Improvements and results of a new method are presented that computes a pre-test estimate of the precision error of the drag coefficient of a wind tunnel model. The error estimate is defined as the part of the drag coefficient's precision error that is primarily associated with the precision error of the angle of attack measurement and physical characteristics of the chosen strain-gage balance. The method indirectly describes the precision error of the angle of attack measurement by using an assumed balance gage output variation of one microV/V. The physical characteristics of the balance, on the other hand, are described by partial derivatives of the axial and normal forces with respect to the strain-gage outputs. These derivatives can directly be obtained from the data reduction matrix of the balance. The precision error estimate itself is calculated by applying a simple explicit equation that uses the model reference area, the dynamic pressure, the angle of attack, the coefficients of the linear terms of the data reduction matrix, and the electrical output variation of one microvolt per volt as input. Precision errors at constant angle of attack may be visualized as contour plots by plotting them, for example, versus the Mach number and the total pressure. Characteristics of NASA's MC60E balance are used in combination with the reference area of a generic wind tunnel model in order to demonstrate that error estimates are independent of both the balance load format and the units chosen for the description of balance loads, model reference area, and the dynamic pressure. Finally, experimental data from a wind tunnel test of the Ames Check Standard Model in the NASA Ames 11-foot Transonic Wind Tunnel illustrates the application of the method to real-world test data.

precision error↗

NASA NTRS1992

Helmet Mounted Display symbology integration research

A five-week flight simulation investigation comparing screen/head stabilized Apache Helmet Mounted Display (HMD) flight symbology to world stabilized flight symbology is presented in this paper. Simulation test results indicate that pilots perform significantly (P is less than .05) better using world stabilized attitude symbology. They were accurate to an average of 1/2 deg at estimating terrain relief and aerial target locations. Pilots were able to take advantage of world referenced symbology due to the unique features of HMD that allow the pilot to visually use the symbology at extreme azimuth and elevation off-axis angles. Pilots preferred world stabilized symbology while performing contour flight tasks. They reported that the use of climb-dive-marker during contour flight greatly reduced pilot work load under conditions tested. A surprising number of cyclic input errors occurred when using both MIL-STD-1295 hover symbology and test symbology, indicating that a better approach for depicting hover symbology is probably warranted. The magnitude of cyclic input and spatial estimation errors increased as the off-axis viewing angle became larger.

Haworth, Loran A.↗

NASA NTRS1993

Venus - Global gravity and topography

A new gravity field determination that has been produced combines both the Pioneer Venus Orbiter (PVO) and the Magellan Doppler radio data. Comparisonsbetween this estimate, a spherical harmonic model of degree and order 21, and previous models show that significant improvements have been made. Results are displayed as gravity contours overlaying a topographic map. We also calculate a new spherical harmonic model of topography based on Magellan altimetry, with PVO altimetry included where gaps exist in the Magellan data. This model is also of degree and order 21, so in conjunction with the gravity model, Bouguer and isostatic anomaly maps can be produced. These results are very consistent with previous results, but reveal more spatial resolution in the higher latitudes.

Mcnamee, J. B.↗

NASA NTRS1990

Skyline based terrain matching

Skyline-based terrain matching, a new method for locating the vantage point of stereo camera or laser range-finding measurements on a global map previously prepared by satellite or aerial mapping is described. The orientation of the vantage is assumed known, but its translational parameters are determined by the algorithm. Skylines, or occluding contours, can be extracted from the sensory measurements taken by an autonomous vehicle. They can also be modeled from the global map, given a vantage estimate from which to start. The two sets of skylines, represented in cylindrical coordinates about either the true or the estimated vantage, are employed as 'features' or reference objects common to both sources of information. The terrain matching problem is formulated in terms of finding a translation between the respective representations of the skylines, by approximating the two sets of skylines as identical features (curves) on the actual terrain. The search for this translation is based on selecting the longest of the minimum-distance vectors between corresponding curves from the two sets of skylines. In successive iterations of the algorithm, the approximation that the two sets of curves are identical becomes more accurate, and the vantage estimate continues to improve. The algorithm was implemented and evaluated on a simulated terrain. Illustrations and examples are included.

Page, Lance A.↗

NASA NTRS2004

Charged Particle Effects on Solar Sails - An Overview

The NASA In-Space Propulsion Program is currently sponsoring a comprehensive look at the effects of the charged particle environment on the first generation of Solar Sail propulsion systems. As part of this, a joint NASA MSFC/JPL team is investigating the effects of spacecraft charging on the preliminary ISP Solar Sail mission designs. This paper will begin by reviewing the plasma environments being proposed for such missions-these range from the ambient solar wind at approximately 1 AU in the ecliptic plane, approximately 0.5 AU solar-polar orbit, and geosynchronous orbit. Following a discussion of the critical design issues associated with Solar Sails from a charging standpoint, a simple Sail configuration for modeling purposes will be presented. Results for the various environments will be illustrated in terms of the estimated surface potentials for the Solar Sail using the NASCAP-2K charging analysis program. Based on these potentials, representative plasma flow fields and potential contours surrounding the Solar Sail will then be presented. The implications of these results--the surface potentials and plasma flow--will be discussed in the context of their effects on Solar Sail operations and structural configurations.

spacecraft charging↗

NASA NTRS1981

Quantification of airport community noise impact in terms of noise levels, population density, and human subjective response

The Fraction Impact Method (FIM), developed by the National Research Council (NRC) for assessing the amount and physiological effect of noise, is described. Here, the number of people exposed to a given level of noise is multiplied by a weighting factor that depends on noise level. It is pointed out that the Aircraft-noise Levels and Annoyance MOdel (ALAMO), recently developed at NASA Langley Research Center, can perform the NRC fractional impact calculations for given modes of operation at any U.S. airport. The sensitivity of these calculations to errors in estimates of population, noise level, and human subjective response is discussed. It is found that a change in source noise causes a substantially smaller change in contour area than would be predicted simply on the basis of inverse square law considerations. Another finding is that the impact calculations are generally less sensitive to source noise errors than to systematic errors in population or subjective response.

Deloach, R.↗

NASA NTRS1986

Performance of high area ratio nozzles for a small rocket thruster

Theoretical estimates of supersonic nozzle performance have been compared to experimental test data for nozzles with an area ratio of 100:1 conical and 300:1 optimum contour, and 300:1 nozzles cut off at 200:1 and 100:1. These tests were done on a Hughes Aircraft Company 5 lbf monopropellant hydrazine thruster with chamber pressures ranging from 25 to 135 psia. The analytic method used is the conventional inviscid method of characteristic with correction for laminar boundary layer displacement and drag. Replacing the 100:1 conical nozzle with the 300:1 contoured nozzle resulted in an improvement in thrust performance of 0.74 percent at chamber pressure of 25 psia to 2.14 percent at chamber pressure of 135 psia. The data is significant because it is experimental verification that conventional nozzle design techniques are applicable even where the boundary layer is laminar and displaces as much as 35 percent of the flow at the nozzle exit plane.

Kushida, R. O.↗

NASA NTRS1987

Measuring ocean waves from space; Proceedings of the Symposium, Johns Hopkins University, Laurel, MD, Apr. 15-17, 1986

Papers are presented on ocean-wave prediction; the quasi-universal form of the spectra of wind-generated gravity waves at different stages of their development; the limitations of the spectral measurements and observations of the group structure of surface waves; the effect of swell on the growth of wind wave; operational wave forecasting; ocean-wave models, and seakeeping using directional wave spectra. Consideration is given to microwave measurements of the ocean-wave directional spectra; SIR research; estimating wave energy spectra from SAR imagery, with the radar ocean-wave spectrometer, and SIR-B; the wave-measurement capabilities of the surface contour radar and the airborne oceanographic lidar; and SIR-B ocean-wave enhancement with fast-Fourier transform techniques. Topics discussed include wave-current interaction; the design and applicability of Spectrasat; the need for a global wave monitoring system; the age and source of ocean swell observed in Hurricane Josephine; and the use of satellite technology for insulin treatment.

Beal, Robert C.↗

NASA NTRS1989

Application of Landsat Thematic Mapper data for coastal thermal plume analysis at Diablo Canyon

The possibility of using Landsat Thematic Mapper (TM) thermal data to derive absolute temperature distributions in coastal waters that receive cooling effluent from a power plant is demonstrated. Landsat TM band 6 (thermal) data acquired on June 18, 1986, for the Diablo Canyon power plant in California were compared to ground truth temperatures measured at the same time. Higher-resolution band 5 (reflectance) data were used to locate power plant discharge and intake positions and identify locations of thermal pixels containing only water, no land. Local radiosonde measurements, used in LOWTRAN 6 adjustments for atmospheric effects, produced corrected ocean surface radiances that, when converted to temperatures, gave values within approximately 0.6 C of ground truth. A contour plot was produced that compared power plant plume temperatures with those of the ocean and coastal environment. It is concluded that Landsat can provide good estimates of absolute temperatures of the coastal power plant thermal plume. Moreover, quantitative information on ambient ocean surface temperature conditions (e.g., upwelling) may enhance interpretation of numerical model prediction.

Gibbons, D. E.↗

NASA NTRS1982

Rangeland biomass estimation demonstration

Because of their sensitivity to chlorophyll density, green leaf density, and leaf water density, two hand-held radiometers which have sensor bands coinciding with thematic mapper bands 3, 4, and 5 were used to calibrate green biomass to LANDSAT spectral ratios as a step towards using portable radiometers to speed up ground data acquisition. Two field reflectance panels monitored incoming radiation concurrently with sampling. Software routines were developed and used to extract data from uncorrected tapes of MSS data provided in NASA LANDSAT universal format. A LANDSAT biomass calibration curve estimated the range biomass over a four scene area and displayed this information spatially as a product in a format of use to ranchers. The regional biomass contour map is discussed.

Newton, R. W.↗

NASA NTRS1989

Extending the sun's magnetic field through the three-dimensional heliosphere

Methods for inferring the interplanetary magnetic field are reviewed. Estimates of the configuration of the field are presented for each phase of the sunspot cycle. The limitations of the methods for predicting it are presented. A contour map of power in the 0.3-0.5 microHz frequency range is presented for various solar latitudes.

Hoeksema, J. Todd↗

NASA NTRS1993

Streamwise vortex meander in a plane mixing layer

The present experimental study was conducted in order to determine the existence of streamwise vortex meander in a mixing layer, and if present, its significance on the measured properties. The dependence of the velocity cross-correlation on the fixed probe location was shown to be a good indicator of the stationarity of the streamwise vortex location. The cross-correlation measurements obtained here indicate that spanwise meander is negligible, although transverse apparent meander (normal to the plane of the mixing layer) was indicated. The transverse meander, exemplified by the elliptical shape of the mean streamwise vorticity contours, was expected, since the streamwise vorticity in the braid region is essentially inclined, with respect to the streamwise direction. These conclusions were supported by results of estimated spanwise profiles of the transverse velocity component. The balance of evidence suggests that the measured mean streamwise vorticity decay is representative of the decay of the vorticity rather than an artifact of meander.

Leboeuf, Richard L.↗

NASA NTRS1982

Stereoscopic observations of hurricanes and tornadic thunderstorms from geosynchronous satellites

Results are presented which show the application of GOES stereoscopy to the investigation of hurricanes and tornadic thunderstorms. Stereo cloud top height contour maps were constructed to observe the structural evolution of two hurricanes, Frederic on September 12, 1979 and Allen on August 8, 1980, and a tornadic thunderstorm complex over Oklahoma on May 2-3, 1979. Stereo height contours of Hurricane Allen reveal a very intense and symmetric storm with a circular shaped central dense overcast with an average height of 16.5 km. Contours of Hurricane Frederic reveal a preferred region for convection with an explosive exhaust tower attaining a maximum height of 17.8 km. Also presented is a technique for estimating tropical cyclone intensity using GOES stereo height and IR temperature information. Results indicate vertical motions ranging from 4.4 m/s for a moderate storm to 7.7 m/s for an intense storm.

Mack, R.↗

NASA NTRS1990

Algorithms and architectures for robot vision

The scope of the current work is to develop practical sensing implementations for robots operating in complex, partially unstructured environments. A focus in this work is to develop object models and estimation techniques which are specific to requirements of robot locomotion, approach and avoidance, and grasp and manipulation. Such problems have to date received limited attention in either computer or human vision - in essence, asking not only how perception is in general modeled, but also what is the functional purpose of its underlying representations. As in the past, researchers are drawing on ideas from both the psychological and machine vision literature. Of particular interest is the development 3-D shape and motion estimates for complex objects when given only partial and uncertain information and when such information is incrementally accrued over time. Current studies consider the use of surface motion, contour, and texture information, with the longer range goal of developing a fused sensing strategy based on these sources and others.

Schenker, Paul S.↗

NASA NTRS1999

Future Radiation Damage in Space Due to South Atlantic Anomaly

The geographic limits of the South Atlantic Anomaly, as defined by radiation damage, are compared to contours of geomagnetic total field intensity, as defined by the 1995 IGRF, for the present and recent past. The most likely secular variation of the geomagnetic field is estimated and used to extrapolate the geomagnetic field to the year 2100. This indicates that radiation damage to spacecraft and humans in space will likely increase and to cover a much larger geographic area.

Heirtzler, J. R.↗

NASA NTRS1984

Application of a quasi-3D inviscid flow and boundary layer analysis to the hub-shroud contouring of a radial turbine

Application of a quasi-3D approach to the aerodynamic analysis of several radial turbine configurations is described. The objective was to improve the rotor aerodynamic characteristics by hub-shroud contouring. The approach relies on available 2D inviscid methods coupled with boundary layer analysis to calculate profile, mixing, and endwall losses. Windage, tip clearance, incidence, and secondary flow losses are estimated from correlations. To eliminate separation along the hub and blade suction surfaces of a baseline rotor, the analysis was also applied to three alternate hub-shroud geometries. Emphasis was on elimination an inducer velocity overshoot as well as increasing hub velocities. While separation was never eliminated, the extent of the separated area was progressively reduced. Results are presented in terms of mid-channel and blade surface velocities; kinetic energy loss coefficients; and efficiency. The calculation demonstrates a first step for a systematic approach to radial turbine design that can be used to identify and control aerodynamic characteristics that ultimately determine heat transfer and component life. Experimentation will be required to assess the extent to which flow and boundary layer behavior were predicted correctly.

Civinskas, K. C.↗

NASA NTRS1984

Application of a quasi-3D inviscid flow and boundary layer analysis to the hub-shroud contouring of a radial turbine

Application of a quasi-3D approach to the aerodynamic analysis of several radial turbine configurations is described. The objective was to improve the rotor aerodynamic characteristics by hub-shroud contouring. The approach relies on available 2D inviscid methods coupled with boundary layer analysis to calculate profile, mixing, and endwall losses. Windage, tip clearance, incidence, and secondary flow losses are estimated from correlations. To eliminate separation along the hub and blade suction surfaces of a baseline rotor, the analysis was also applied to three alternate hub-shroud geometries. Emphasis was on elimination of an inducer velocity overshoot as well as increasing hub velocities. While separation was never eliminated, the extent of the separated area was progressively reduced. Results are presented in terms of mid-channel and blade surface velocities; kinetic energy loss coefficients; and efficiency. The calculation demonstrates a first step for a systematic approach to radial turbine design that can be used to identify and control aerodynamic characteristics that ultimately determine heat transfer and component life. Experimentation will be required to assess the extent to which flow and boundary layer behavior were predicted correctly.

Civinskas, K.↗

NASA NTRS1987

Measurement of the effect of manufacturing deviations on natural laminar flow for a single engine general aviation airplane

Renewed interest in natural laminar flow (NLF) had rekindled designer concern that manufacuring deviations may destroy the effectiveness of NLF for an operational aircraft. Experiments are summarized that attemtped to measure total drag changes associated with three different wing surface conditions on an aircraft typical of current general aviation high performance singles. The speed power technique was first used in an attempt to quantify the changes in total drag. Predicted and measured boundary layer transition locations for three different wing surface conditions were also compared, using two different forms of flow visualization. The three flight test phases included: assessment of an unpainted airframe, flight tests of the same aircraft after painstakingly filling and sanding the wings to design contours, and similar measurement after this aricraft was painted. In each flight phase, transition locations were monitored using with sublimating chemicals or pigmented oil. Two-dimensional drag coefficients were estimated using the Eppler-Somers code and measured with a wake rake in a method very similar to Jones' pitot traverse method. The net change in two-dimensional drag coefficient was approximately 20 counts between the unpainted aircraft and the hand-smoothed aircraft for typical cruise flight conditions.

Source record↗