Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Race conditions and data partitioning: risks posed by common errors to reproducible parallel simulations

When parallel algorithms for simulation were introduced in the 1970s, their development and use interested only experts in parallel computation. This circumstance changed as multi-core processors became commonplace, putting a parallel computer into the hands of every modeler. A natural outcome is growing interest in parallel simulation among persons not intimately familiar with parallel computing. At the same time, parallel simulation tools continue to be developed with the implicit assumption that the modeler is knowledgeable about parallel programming. The unintended consequence is a rapidly growing number of users of parallel simulation tools that are unlikely to recognize when the interaction of race conditions, partitioning strategies, and simultaneous action in their simulation models make results non-reproducible, thereby calling into question the validity of conclusions drawn from the simulation data. Here, we illustrate the potential dangers of exposing parallel algorithms to users who are not experts in parallel computation with example models constructed using existing parallel simulation tools. By doing so, we hope to refocus tool developers on usability, even if this new focus incurs loss of some performance.

97 MATHEMATICS AND COMPUTING↗

Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

Scale-adaptive simulation (SAS) of the transient gas–liquid two-phase flow in a laboratory-scale continuous-casting mold is presented. The main objective is to investigate the applicability of the scale-adaptive unsteady Reynolds-averaged Navier–Stokes turbulent model (URANS SAS) for predicting the transient multiscale turbulent structures in a two-phase flow. Good quantitative agreements with the experimental data and the large eddy simulation (LES) results are obtained both for the time-averaged velocity field and for the transient turbulent characteristics. The introduction of the von Karman length-scale into the turbulence-scale equation allows the SAS model to dynamically adjust to the resolved turbulent structures. The LES-like pulsating behavior of the air gas and the large-scale liquid eddy magnitudes in the unsteady regions of flow field are captured by the SAS model. The classical − 5/3 law of power spectrum density (PSD) of the axial velocity is kept properly for the single-phase turbulent flow. For two-phase flow, the decay of PSD is too steep at the high-frequency region; the predicted PSD obtained with SAS is damped stronger than that estimated by LES. The SAS model offers an attractive alternative to the existing LES approach or to the other hybrid RANS/LES models for strongly unsteady flows.

36 MATERIALS SCIENCE↗

Adaptive hybrid simulations for multiscale stochastic reaction networks

The probability distribution describing the state of a Stochastic Reaction Network (SRN) evolves according to the Chemical Master Equation (CME). It is common to estimate its solution using Monte Carlo methods such as the Stochastic Simulation Algorithm (SSA). In many cases, these simulations can take an impractical amount of computational time. Therefore, many methods have been developed that approximate sample paths of the underlying stochastic process and estimate the solution of the CME. A prominent class of these methods include hybrid methods that partition the set of species and the set of reactions into discrete and continuous subsets. Such a partition separates the dynamics into a discrete and a continuous part. Simulating such a stochastic process can be computationally much easier than simulating the exact discrete stochastic process with SSA. Moreover, the quasi-stationary assumption to approximate the dynamics of fast subnetworks can be applied for certain classes of networks. However, as the dynamics of a SRN evolves, these partitions may have to be adapted during the simulation. We develop a hybrid method that approximates the solution of a CME by automatically partitioning the reactions and species sets into discrete and continuous components and applying the quasi-stationary assumption on identifiable fast subnetworks. Our method does not require any user intervention and it adapts to exploit the changing timescale separation between reactions and/or changing magnitudes of copy-numbers of constituent species. We demonstrate the efficiency of the proposed method by considering examples from systems biology and showing that very good approximations to the exact probability distributions can be achieved in significantly less computational time. This is especially the case for systems with oscillatory dynamics, where the system dynamics change considerably throughout the time-period of interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

STRAIGHTENING THE DENSITY-DISPLACEMENT RELATION WITH A LOGARITHMIC TRANSFORM

We investigate the use of a logarithmic density variable in estimating the Lagrangian displacement field motivated by the success of a logarithmic transformation in restoring information to the matter power spectrum. The logarithmic relation is an extension of the linear relation, motivated by the continuity equation, in which the density field is assumed to be proportional to the divergence of the displacement field; we compare the linear and logarithmic relations by measuring both of these fields directly in a cosmological N-body simulation. The relative success of the logarithmic and linear relations depends on the scale at which the density field is smoothed. Thus we explore several ways of measuring the density field, including Cloud-In-Cell smoothing, adaptive smoothing, and the (scale-independent) Delaunay tessellation, and we use both a Fourier-space and a geometrical tessellation approach to measuring the divergence. We find that the relation between the divergence of the displacement field and the density is significantly tighter and straighter with a logarithmic density variable, especially at low redshifts and for very small ({approx}2 h{sup -1} Mpc) smoothing scales. We find that the grid-based methods are more reliable than the tessellation-based method of calculating both the density and the divergence fields, though in both cases the logarithmic relation works better in the appropriate regime, which corresponds to nonlinear scales for the grid-based methods and low densities for the tessellation-based method.

79 ASTRONOMY AND ASTROPHYSICS↗

Transmutation Scoping Studies for a Chloride Molten Salt Reactor

Over the past few years, there has been strong renewed interest from private industry, mostly from start-up enterprises, in molten salt reactor (MSR) technologies because of the unique properties of this class of reactors. These are reactors in which the fuel is homogeneously mixed with the coolant in the form of liquid salts and is circulated continuously into and out of the active core region with on-line fuel management, salt treatment, and salt processing. In response to such wide-spread interest, Argonne National Laboratory is expanding its well-established reactor modelling and simulation expertise and infrastructure to enable detailed analysis and design of MSRs. The tools being developed are able to simulate the continuous fuel flow, the complex on-line fuel management and elemental removal processes (e.g., fission product removal) using depletion steps representative of a real MSR system. Leveraging these capabilities, a parametric study on the transmutation performance of a simplified actinide-burning MSR concept that uses a chloride-based salt was performed. This type of salt has attracted attention over the more commonly discussed fluoride-based salts since no tritium is produced as a result of irradiation and it is compatible with a fast neutron spectrum. The studies discussed in this paper examine the performance of a burner MSR design with a fixed core size and power density over a range of possible fuel salt molar ratios with NaCl-MgCl2 as the carrier salt. The intent is to quantify the impact on the required transuranics content of the make-up fuel, the actinide transmutation rates, and other performance characteristics for typical burner MSR designs.

Heidet, Florent↗

Novel Sorption Enhanced Reaction Process for Simultaneous Production of CO 2 and H 2 from Synthesis Gas Produced by Coal Gasification

The goal of this project is to evaluate the extensive feasibility of a novel concept called Thermal Swing Sorption Enhanced Reaction (TSSER) process to simultaneously produce H 2 and CO 2 as a single unit operation in a sorber-reactor. The successful demonstration of the potential feasibility of the TSSER concept implies that it is worth pursuing further development of the idea. This can be done by more extensive evaluation of the basic sorptive properties of the CO 2 chemisorbents at realistic high pressures and by continuing the experimental and theoretical study of the TSSER process. This will allow us to substantiate the assumptions made during the preliminary design and evaluation of the process and firm up the initial conclusions. The task performed under this project consists of (i) retrofitting an existing single column sorption apparatus for measurement of high pressure CO 2 sorption characteristics, (ii) measurement of high pressure CO 2 chemisorption equilibria, kinetics and sorption-desorption column dynamic characteristics under the conditions of thermal swing operation of the TSSER process, (iii) experimental evaluation of the individual steps of the TSSER process (iv) development of extended mathematical model for simulating cyclic continuous operation of TSSER to aid in process scale-up and for guiding future work, (v) simulate and test SER concept using realistic syngas composition, (vi) extensive demonstration of the thermal stability of sorbents using a TGA apparatus, (vii) investigation of the surfaces of the adsorbents and adsorbed CO 2 ,and (viii) test the effects of sulfur compounds found in syngas on the CO 2 sorbents.

01 COAL, LIGNITE, AND PEAT↗

Mechanism of Macrosegregation Formation in Continuous Casting Slab: A Numerical Simulation Study

Solidified shell bulging is supposed to be the main reason for slab center segregation, while the influence of thermal shrinkage rarely has been considered. In this article, a thermal shrinkage model coupled with the multiphase solidification model is developed to investigate the effect of the thermal shrinkage, solidification shrinkage, grain sedimentation, and thermal flow on solute transport in the continuous casting slab. In this model, the initial equiaxed grains contract freely with the temperature decrease, while the coherent equiaxed grains and columnar phase move directionally toward the slab surface. The results demonstrate that the center positive segregation accompanied by negative segregation in the periphery zone is mainly caused by thermal shrinkage. During the solidification process, liquid phase first transports toward the slab surface to compensate for thermal shrinkage, which is similar to the case considering solidification shrinkage, and then it moves opposite to the slab center near the solidification end. It is attributed to the sharp decrease of center temperature and the intensive contract of solid phase, which cause the enriched liquid to be squeezed out. With the effect of grain sedimentation and thermal flow, the negative segregation at the external arc side (zone A1) and the positive segregation near the columnar-to-equiaxed transition at the inner arc side (position B1) come into being. Besides, it is found that the grain sedimentation and thermal flow only influence solute transport before equiaxed grains impinge with each other, while the solidification and thermal shrinkage still affect solute redistribution in the later stage.

36 MATERIALS SCIENCE↗

Experiment to Investigate the On-set of Transient Fission Gas Release Under Simulated LOCA Conditions

Continuing efforts to better understand the phenomenon of transient fission gas release in irradiated commercial light water reactor fuel undergoing a simulated loss of coolant accident (LOCA) will be discussed in this work. During heating associated with LOCA conditions there is an additional release of fission gas beyond what is typically released during steady state operation. The exact timing of this release could impact the cladding balloon and rupture as the LOCA progresses in an actual accident. Recent experiments performed on the upgraded Severe Accident Test Station at Oak Ridge National Laboratory have expanded the current assessment of transient fission gas release. This system evaluates fission gas release by sweeping fission gas out of the LOCA test furnace and into cryogenically cooled cold traps where radioactive noble gas fission products are measured by gamma spectrometry. Additionally, the sweep gas can be monitored by a gas mass spectrometer to provide additional data on noble gas release and changes in the sweep gas atmosphere during heating. Several different conditions have been evaluated that explored the response of irradiated fuel to different thermal ramp conditions and different overpressure conditions. This further confirmed the impact of an overpressure in suppressing transient fission gas release. Further experiments are planned to evaluate the on-set temperature of transient fission gas release under a known overpressure. This test will progressively step through different temperature conditions while maintaining hydrostatic pressure on the fuel that is representative of high burnup fuel conditions. The available results from this type of testing will be discussed. Post-test microscopy will be compared to other transient fission gas release and standard LOCA tests to further understand the microstructural source of transient fission gas release.

Harp, Jason [ORNL] (ORCID:0000000253458440)↗

Light-curve Analysis of Ordinary Type IIP Supernovae Based on Neutrino-driven Explosion Simulations in Three Dimensions

Type II-plateau supernovae (SNe IIP) are the most numerous subclass of core-collapse SNe originating from massive stars. In the framework of the neutrino-driven explosion mechanism, we study the properties of the SN outburst for a red supergiant progenitor model and compare the corresponding light curves with observations of the ordinary Type IIP SN 1999em. Three-dimensional (3D) simulations of (parametrically triggered) neutrino-driven explosions are performed with the (explicit, finite-volume, Eulerian, multifluid hydrodynamics) code Prometheus, using a presupernova model of a 15 M {sub ⊙} star as initial data. On approaching homologous expansion, the hydrodynamic and composition variables of the 3D models are mapped to a spherically symmetric configuration, and the simulations are continued with the (implicit, Lagrangian, radiation hydrodynamics) code Crab to follow the evolution of the blast wave during the SN outburst. Our 3D neutrino-driven explosion model with an explosion energy of about 0.5×10{sup 51} erg produces {sup 56}Ni in rough agreement with the amount deduced from fitting the radioactively powered light-curve tail of SN 1999em. The considered presupernova model, 3D explosion simulations, and light-curve calculations can explain the basic observational features of SN 1999em, except for those connected to the presupernova structure of the outer stellar layers. Our 3D simulations show that the distribution of {sup 56}Ni-rich matter in velocity space is asymmetric with a strong dipole component that is consistent with the observations of SN 1999em. The monotonic decline in luminosity from the plateau to the radioactive tail in ordinary SNe IIP is a manifestation of the intense turbulent mixing at the He/H composition interface.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasinormal modes of Kerr-de Sitter black holes

We calculate the fundamental quasinormal modes of the Kerr-de Sitter black hole for the first time. In order to calculate the quasinormal modes, we employ the master equations derived by Suzuki, Takasugi, and Umetsu, who transform the Teukolsky equations for the Kerr-de Sitter black hole into the standard form of the Heun's equation. The transformed functions are expanded around the outer horizon of the black hole or the symmetric axis in the Froebenius series whose coefficients satisfy a three-term recurrence relation. These three-term recurrence relations allow us to use Leaver's continued fraction method to calculate the angular separation constant and the quasinormal mode frequency. Any unstable fundamental quasinormal mode is not found in this paper. It is also observed that for some black holes characterized by a large mass parameter, some retrograde modes in the slow rotation limit become prograde as the black hole spin increases. This phenomenon does not occur for the fundamental modes of the Kerr black hole.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Constructing Neural Network Based Models for Simulating Dynamical Systems

Dynamical systems see widespread use in natural sciences like physics, biology, and chemistry, as well as engineering disciplines such as circuit analysis, computational fluid dynamics, and control. For simple systems, the differential equations governing the dynamics can be derived by applying fundamental physical laws. However, for more complex systems, this approach becomes exceedingly difficult. Data-driven modeling is an alternative paradigm that seeks to learn an approximation of the dynamics of a system using observations of the true system. In recent years, there has been an increased interest in applying data-driven modeling techniques to solve a wide range of problems in physics and engineering. Here this article provides a survey of the different ways to construct models of dynamical systems using neural networks. In addition to the basic overview, we review the related literature and outline the most significant challenges from numerical simulations that this modeling paradigm must overcome. Based on the reviewed literature and identified challenges, we provide a discussion on promising research areas.

97 MATHEMATICS AND COMPUTING↗

A nonlinear analysis of the terahertz serpentine waveguide traveling-wave amplifier

A nonlinear model for the numerical simulation of terahertz serpentine waveguide traveling-wave tube (SW-TWT) is described. In this model, the electromagnetic wave transmission in the SW is represented as an infinite set of space harmonics to interact with an electron beam. Analytical expressions for axial electric fields in axisymmetric interaction gaps of SW-TWTs are derived and compared with the results from CST simulation. The continuous beam is treated as discrete macro-particles with different initial phases. The beam-tunnel field equations, space-charge field equations, and motion equations are combined to solve the beam-wave interaction. The influence of backward wave and relativistic effect is also considered in the series of equations. The nonlinear model is used to design a 340 GHz SW-TWT. Several favorable comparisons of model predictions with results from a 3-D Particle-in-cell simulation code CHIPIC are presented, in which the output power versus beam voltage and interaction periods are illustrated. The relative error of the predicted output power is less than 15% in the 3 dB bandwidth and the relative error of the saturated length is less than 8%.The results show that the 1-D nonlinear analysis model is appropriate to solve the terahertz SW-TWT operation characteristics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Burnup calculations for KIPT accelerator driven subcritical facility using Monte Carlo computer codes-MCB and MCNPX.

Argonne National Laboratory (ANL) of USA and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have been collaborating on the conceptual design development of an electron accelerator driven subcritical (ADS) facility, using the KIPT electron accelerator. The neutron source of the subcritical assembly is generated from the interaction of 100 KW electron beam with a natural uranium target. The electron beam has a uniform spatial distribution and electron energy in the range of 100 to 200 MeV. The main functions of the subcritical assembly are the production of medical isotopes and the support of the Ukraine nuclear power industry. Neutron physics experiments and material structure analyses are planned using this facility. With the 100 KW electron beam power, the total thermal power of the facility is {approx}375 kW including the fission power of {approx}260 kW. The burnup of the fissile materials and the buildup of fission products reduce continuously the reactivity during the operation, which reduces the neutron flux level and consequently the facility performance. To preserve the neutron flux level during the operation, fuel assemblies should be added after long operating periods to compensate for the lost reactivity. This process requires accurate prediction of the fuel burnup, the decay behavior of the fission produces, and the introduced reactivity from adding fresh fuel assemblies. The recent developments of the Monte Carlo computer codes, the high speed capability of the computer processors, and the parallel computation techniques made it possible to perform three-dimensional detailed burnup simulations. A full detailed three-dimensional geometrical model is used for the burnup simulations with continuous energy nuclear data libraries for the transport calculations and 63-multigroup or one group cross sections libraries for the depletion calculations. Monte Carlo Computer code MCNPX and MCB are utilized for this study. MCNPX transports the electrons and the produced neutrons and photons but the current version of MCNPX doesn't support depletion/burnup calculation of the subcritical system with the generated neutron source from the target. MCB can perform neutron transport and burnup calculation for subcritical system using external neutron source, however it cannot perform electron transport calculations. To solve this problem, a hybrid procedure is developed by coupling these two computer codes. The user tally subroutine of MCNPX is developed and utilized to record the information of the each generated neutron from the photonuclear reactions resulted from the electron beam interactions. MCB reads the recorded information of each generated neutron thorough the user source subroutine. In this way, the neutron source generated by electron reactions could be utilized in MCB calculations, without the need for MCB to transport the electrons. Using the source subroutines, MCB could get the external neutron source, which is prepared by MCNPX, and perform depletion calculation for the driven subcritical facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Final Scientific Findings Report- Hydro Research Foundation- Research Awards Program

The Research Awards Program was established in 2014 by the Hydro Research Foundation (Foundation) to support research efforts for the hydropower industry. Using the previously funded Fellowship Program that ran from 2010-2015, the Research Awards Program (RAP or program) captured the lessons learned from the Fellowship program and fine-tuned a nation-wide graduate level research program to support innovation, research and workforce development. The RAP was funded through a $2 million-dollar grant through the Department of Energy’s Water Power Program within the Energy Efficiency and Renewable Energy office (DOE). This award made possible, 33 research projects by 32 students from 21 universities in 11 states. The grant widely engaged the industry by providing the opportunity to work with 25 organizations as well as 63 students and advisors. The funded research focused on a topic list selected by industry and worked to cover a breadth of research needs across many disciplines, basins and types of hydropower issues. The funded work, answered pressing research needs in the fields of the following disciplines; civil engineering, mechanical engineering, environmental engineering, electrical engineering, geography, fisheries, wildlife, water resources, geology, energy science and materials innovation. The Foundation estimates that 116 individuals benefited from this research through either direct mentorship (42), research (32), overseeing the research (31), partnerships (7) and the day-to-day management of the program (4). This investment by DOE showcases how private-public partnerships can leverage limited funds to create a wide range of research products. The project objective was to build on the successful Fellowship Program to develop and execute the RAP on a national level. The program sought to provide competitively awarded hydropower-related graduate-level research awards. The intent of the RAP was to support beneficial, innovative research related to conventional or pumped-storage hydropower. It also sought to stimulate interest among students and universities in this research arena and provide students with a foundation for productive careers within the hydropower industry. The outcome was 33 research findings with 100% of proposed research completed. In addition, 87% of students chose to either join the hydropower industry or continue their hydropower related research at their universities. These research findings advanced the understanding of pressing research topics within the hydropower industry and met the objective of the funding. An ancillary benefit the program identified through this funding was, not only did 63 students and advisors work on hydropower within the academia space, but now there are more professors and students teaching hydropower at the university level. The program saw an addition of 12 new professors, teaching assistants, and graduate researchers continuing to simulate interest in hydropower. Another interesting outcome is that during this grant funding, the program saw alumni of the predecessor program, who are now professors, applying for the RAP with their students. A unique element of this funding is there was significant cost-share provided by host universities, who did not charge facilities and administration overhead to the student’s research awards. In addition, each university provided laboratories, computing capacity and research facilities to support the research which is extraordinarily unique to grant funding at the university level. The total cost share exceeded 30% of the total grant cost. The funding clearly reached many sectors of the industry to provide helpful work and continue building hydropower’s next generation of innovation and workforce. The Foundation has established a broad network of universities interested and engaged in hydropower. The work was supported by the hydropower industry through donations of meeting space, conference registrations, in-kind contributions, mentorship and support of students. The Foundation would recommend finding a vehicle to further advance programs like the graduate level research through competitions, competitively funded awards and student research. It will take many universities to advance hydropower’s most pressing challenges. To let a program like the RAP dwindle away would incapacitate research at universities.

13 HYDRO ENERGY↗

Radiation feedback in ULIRGs: are photons movers and shakers?

We perform multidimensional radiation hydrodynamics simulations to study the impact of radiation forces on atmospheres composed of dust and gas. Our setup closely follows that of Krumholz and Thompson, assuming that dust and gas are well-coupled and that the radiation field is characterized by blackbodies with temperatures ≳ 80 K, as might be found in ultraluminous infrared galaxies (ULIRGs). In agreement with previous work, we find that Rayleigh-Taylor instabilities develop in radiation supported atmospheres, leading to inhomogeneities that limit momentum exchange between radiation and dusty gas, and eventually providing a near balance of the radiation and gravitational forces. However, the evolution of the velocity and spatial distributions of the gas differs significantly from previous work, which utilized a less accurate flux-limited diffusion (FLD) method. Our variable Eddington tensor simulations show continuous net acceleration of the gas and never reach a steady state. In contrast, our FLD results show little net acceleration of the gas and settle into a quasi-steady, turbulent state with low velocity dispersion. The discrepancies result primarily from the inability of FLD to properly model the variation of the radiation field around structures that are less than a few optical depths across. We consider the effect of varying the optical depth and study the differences between two-dimensional and three-dimensional runs. We conclude that radiation feedback remains a plausible mechanism for driving high-Mach number turbulence in ULIRGs with sufficiently high optical depths. We discuss implications for observed systems and galactic-scale numerical simulations of feedback.

79 ASTRONOMY AND ASTROPHYSICS↗

Convective Raman amplification of light pulses causing kinetic inflation in inertial fusion plasmas

We perform 1D particle-in-cell (PIC) simulations using OSIRIS, which model a short-duration ({approx}500{omega}{sub 0}{sup -1} FWHM) scattered light seed pulse in the presence of a constant counter-propagating pump laser with an intensity far below the absolute instability threshold. The seed undergoes linear convective Raman amplification and dominates over fluctuations due to particle discreteness. Our simulation results are in good agreement with results from a coupled-mode solver when we take into account special relativity and the use of finite size PIC simulation particles. We present linear gain spectra including both effects. Extending the PIC simulations past when the seed exits the simulation domain reveals bursts of large-amplitude scattering in many cases, which does not occur in simulations without the seed pulse. These bursts can have amplitudes several times greater than the amplified seed pulse, and we demonstrate that this large-amplitude scattering is the result of kinetic inflation by examining trapped particle orbits. This large-amplitude scattering is caused by the seed modifying the distribution function earlier in the simulation. We perform some simulations with longer duration seeds, which lead to parts of the seeds undergoing kinetic inflation and reaching amplitudes several times more than the steady-state linear theory results. Simulations with continuous seeds demonstrate that the onset of inflation depends on seed wavelength and incident intensity, and we observe oscillations in the reflectivity at a frequency equal to the difference between the seed frequency and the frequency at which the inflationary stimulated Raman scattering grows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FIELD LINES TWISTING IN A NOISY CORONA: IMPLICATIONS FOR ENERGY STORAGE AND RELEASE, AND INITIATION OF SOLAR ERUPTIONS

We present simulations modeling closed regions of the solar corona threaded by a strong magnetic field where localized photospheric vortical motions twist the coronal field lines. The linear and nonlinear dynamics are investigated in the reduced magnetohydrodynamic regime in Cartesian geometry. Initially the magnetic field lines get twisted and the system becomes unstable to the internal kink mode, confirming and extending previous results. As typical in this kind of investigations, where initial conditions implement smooth fields and flux-tubes, we have neglected fluctuations and the fields are laminar until the instability sets in. However, previous investigations indicate that fluctuations, excited by photospheric motions and coronal dynamics, are naturally present at all scales in the coronal fields. Thus, in order to understand the effect of a photospheric vortex on a more realistic corona, we continue the simulations after kink instability sets in, when turbulent fluctuations have already developed in the corona. In the nonlinear stage the system never returns to the simple initial state with ordered twisted field lines, and kink instability does not occur again. Nevertheless, field lines get twisted, although in a disordered way, and energy accumulates at large scales through an inverse cascade. This energy can subsequently be released in micro-flares or larger flares, when interaction with neighboring structures occurs or via other mechanisms. The impact on coronal dynamics and coronal mass ejections initiation is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymptotic iteration method for spheroidal harmonics of higher-dimensional Kerr-(A)dS black holes

In this work we calculate the angular eigenvalues of the (n+4)-dimensional simply rotating Kerr-(A)dS spheroidal harmonics using the asymptotic iteration method. We make some comparisons between this method and that of the continued fraction method and use the latter to check our results. We also present analytic expressions for the small rotation limit up to O(c{sup 3}) with the coefficient of each power up to O({alpha}{sup 2}), where c=a{omega} and {alpha}=a{sup 2}{lambda} (a is the angular velocity, {omega} the frequency, and {lambda} the cosmological constant)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗