Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “confining effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Water-Assisted Proton Transport in Confined Nanochannels

Hydrated excess protons under hydrophobic confinement are a critical component of charge transport behavior and reactivity in nanoporous materials and biomolecular systems. In this study, excess proton confinement effects are computationally investigated for sub-2 nm hydrophobic nanopores by varying the diameters (d = 0.81, 0.95, 1.09, 1.22, 1.36, 1.63, and 1.90 nm), lengths (l ~3 and ~5 nm), curvature, and chirality of cylindrical carbon nanotube (CNT) nanopores. CNTs with a combination of different diameter segments are also explored. The spatial distribution of water molecules under confinement is diameter-dependent; however, proton solvation and transport are consistently found to occur in the water layer adjacent to the pore wall, showing an “amphiphilic” character of the hydrated excess proton hydronium-like structure. The proton transport free energy barrier also decreases significantly as the nanopore diameter increases and proton transport becomes almost barrierless in the d > 1 nm nanopores. Among the nanopores studied, the Zundel cation (H 5 O 2 + ) is populated only in the d = 0.95 nm CNT (7,7) nanopore. The presence of the hydrated excess proton and K + inside the CNT (7,7) nanopore induces a water density increase by 40 and 20%, respectively. The K + transport through CNT nanopores is also consistently higher in the free energy barrier than proton transport. Interestingly, the evolution of excess protonic charge defect distribution reveals a “frozen” single water wire configuration in the d = 0.81 nm CNT (6,6) nanopore (or segment), through which hydrated excess protons can only shuttle via the Grotthuss mechanism. Vehicular diffusion becomes relevant to proton transport in the “flat” free energy regions and in the wider nanopores, where protons do not primarily shuttle in the axial direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Modeling Nanoconfinement Effects Using Active Learning

Predicting the spatial configuration of gas in nanopores of is relevant in applications such as fluid flow forecasting and hydrocarbon reserves estimation. For example, shale reservoirs have suffered from computationally intractable multiscale problems, since fluid properties such as viscosity, density, and adsorption must be calculated by using expensive molecular dynamics (MD) simulations within each nanopore, whereas flow through these connected nanopores must be simulated at the micrometer scale. We utilize machine learning techniques to quickly and accurately model nanoscale confinement effects as an important step toward bridging the nano and micro scales. Our workflow is based on building and training physics-based deep-neural-networks models by learning from a database of MD calculations. The model accounts for the adsorption phenomenon by predicting the statistical distribution of gas inside nanopores. Because large databases of MD calculations are expensive to create, we investigate active learning (AL) as a data set construction strategy. In this workflow, new data are selected based on the model uncertainty via the query-by-committee approach. We show that our workflow obtains accurate models that generalize to real scanning electron microscopy geometries with 1/10th of the number of MD calculations required vs random data set generation. Our method enables the possibility of modeling nanoconfinement effects at the mesoscale, where complex connected sets of nanopores affect flow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxygen and Proton Transport in Flooded Graphene Pores with N-Dopants and Defects

Reactant transport is an important consideration in the design of ideal electrode structures. For the oxygen reduction reaction catalyzed by Pt/C in proton exchange membrane fuel cell cathodes, O 2 and H + delivery to Pt surfaces and H 2 O transport away are required. Some Pt nanoparticles may only be accessible via micropores that are too small for ionomer molecules to enter, possibly requiring flooding for H + transport. Here, to test if these “buried” Pt particles can play a role in activity through this proposed transport mechanism, we have performed atomic-scale simulations based on reactive force field molecular dynamics with an emphasis on confinement below 20 Å. Diffusion coefficients as a function of the molar concentration and local environment have been evaluated in water domains confined in two-dimensional graphene nanochannels of various channel heights representing a morphological model for micropores in proton exchange fuel cell cathodes. Our study shows that local atomic-scale structures can strongly modify H + , O 2 , and H 2 O transport rates in flooded micropores less than 20 Å in size. We find that there is a critical crossover in diffusion behavior around the 20 Å spacing with larger pores having bulk-like diffusion properties and confinement below 20 Å monotonically decreases diffusion rates. As pore size decreases, we observe locally dispersed water regions that ultimately strand reactants from long-distance transport. These findings suggest that flooded micropores may in fact be viable transport pathways for relevant reactants and products if the pore walls on opposite sides remain separated by ≥10 Å separation. Furthermore, the confinement effect is so strong that N-doping and C-vacancy defects in the C pore wall have only a minimal impact on diffusion rates and their effects are counterintuitively more apparent at larger spacings. These findings provide valuable insight regarding cathode performance and the role “stranded” catalyst particles may play in fuel cell cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Introduction to special issue: Colloidal quantum dots

The quantum confinement effect has driven the development and exploration of colloidal semiconductor nanocrystals over approximately the past three decades. These semiconductor nanostructures are typically synthesized as stable colloidal dispersions in solution-phase chemical batch reactions at relatively low temperatures. Researchers have developed a wide range of reaction conditions to produce a variety of shapes, compositions, and structures with well-controlled sizes and low polydispersities. The shape can be controlled to produce confinement in one, two, or all three spatial dimensions, the latter defining a “quantum dot.” Combining two or more semiconductors within the various nanostructures produces additional optical and electronic degrees of freedom. These mixed compositional nanostructures have properties not accessible in bulk semiconductor systems. Further, researchers have fabricated novel nanoheterostructures, such as “dot-in-rods,” quantum wells, core/shell structures, giant-core/shell tetrapods where the core is one material and the arm is another, Janus structures that consist of spherical structures with well-defined internal heterostructures, nano-dumbbells, hollow-core structures, and many other novel and interesting structures. The structural variations are seemingly only limited by the creativity of the various researchers engaged in these endeavors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxide-Free Three-Dimensional Germanium/Silicon Core–Shell Metalattice Made by High-Pressure Confined Chemical Vapor Deposition

Metalattices are crystalline arrays of uniform particles in which the period of the crystal is close to some characteristic physical length scale of the material. In this work, we explore the synthesis and properties of a germanium metalattice in which the similar to 70 nm periodicity of a silica colloidal crystal template is close to the similar to 24 nm Bohr exciton radius of the nanocrystalline Ge replica. The problem of Ge surface oxidation can be significant when exploring quantum confinement effects or designing electronically coupled nanostructures because of the high surface area to volume ratio at the nanoscale. To eliminate surface oxidation, we developed a coreshell synthesis in which the Ge metalattice is protected by an oxide-free Si interfacial layer, and we explore its properties by transmission electron microscopy (TEM), Raman spectroscopy, and electron energy loss spectroscopy (EELS). The interstices of a colloidal crystal film grown from 69 nm diameter spherical silica particles were filled with polycrystalline Ge by high-pressure confined chemical vapor deposition (HPcCVD) from GeH4. After the SiO2 template was etched away with aqueous HF, the Ge replica was uniformly coated with an amorphous Si shell by HPcCVD as confirmed by TEM-EDS (energy-dispersive X-ray spectroscopy) and Raman spectroscopy. Formation of the shell prevents oxidation of the Ge core within the detection limit of XPS. The electronic properties of the core-shell structure were studied by accessing the Ge 3d edge onset using STEM-EELS. A blue shift in the edge onset with decreasing size of Ge sites in the metalattices suggests quantum confinement of the Ge core. The degree of quantum confinement of the Ge core depends on the void sizes in the template, which is tunable by using silica particles of varying size. The edge onset also shows a shift to higher energy near the shell in comparison with the Ge core. This shift along with the observation of Ge-Si vibrational modes in the Raman spectrum indicate interdiffusion of Ge and Si. Both the size of the voids in the template and core-shell interdiffusion of Si and Ge can in principle be tuned to modify the electronic properties of the Ge metalattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Metal–Organic Frameworks as Catalysts for (De)Hydrogenation: Progress, Challenges, and Perspectives

Storing hydrogen through chemical bonding in liquid-organic hydrogen carriers (LOHCs) offers a safer and more practical approach for hydrogen transportation compared to physical liquefaction, which is limited by low volumetric efficiency and gas release. The efficiency of LOHC systems is highly dependent on effective catalysts, which are typically composed of transition metals supported on metal oxides. However, these materials often rely upon costly noble metals, and their nonuniform nature limits mechanistic insights and structure–function relationships that could improve catalyst design. Metal–organic frameworks (MOFs) are promising alternatives to existing catalysts due to their crystalline, tunable, and porous nature. However, their use as catalysts for (de)hydrogenation reactions remains largely underexplored. Related to this, we identify two general classes of MOFs reported as catalysts for (de)hydrogenation reactions: MOFs as scaffolds for catalytically active species and MOFs that function as reactive materials themselves. MOF composites anchor reactive nanoparticles or homogeneous species, imparting reactivity to the framework. The confinement effects experienced by the affixed species, combined with favorable substrate adsorption interactions or acid sites provided by the MOF, enhance the stability, selectivity, and activity of these catalysts for (de)hydrogenation reactions. Additionally, catalytically active MOFs often feature open metal sites at the node or undergo postsynthetic modification at either node or linker to impart reactivity. Here, taking inspiration from these materials, we outline the current state and key challenges of utilizing MOFs as (de)hydrogenation catalysts and propose research pathways to advance materials in this field for energy applications.

Catalysts↗
DOE OSTI2026

Confinement-Controlled Rearrangements in Dioxolane Upgrading on H-ZSM-5 Revealed by Periodic DFT

Zeolitic Brønsted acid sites catalyze carbocation rearrangements central to upgrading biomass-derived oxygenates. Here we elucidate the mechanism of dioxolane conversion to methyl ethyl ketone and isobutanal on H-ZSM-5 using periodic density functional theory on the MFI model, complemented by ab initio molecular dynamics to probe confinement effects. Dioxolane adsorption at the Brønsted site is followed by protonation-assisted ring opening to form an oxocarbenium intermediate stabilized by the deprotonated framework. From this common intermediate, selectivity is governed by two competing rearrangements, namely, the 1,2-hydride shift with a free-energy barrier of 18.05 kcal mol –1 at 498 K leading toward MEK, and the 1,2-methyl shift with a higher barrier of 25.40 kcal mol –1 leading toward isobutanal. The hydride-shift channel is kinetically preferred over the methyl-shift channel, lowering the isobutanal/MEK ratio below the 3:1 limit expected for equal branching. Adsorption thermodynamics further indicate stronger stabilization of MEK than isobutanal within ZSM-5 channels, suggesting that confinement-controlled binding can bias product distributions in addition to intrinsic rearrangement barriers. These results highlight how Brønsted acidity and pore confinement jointly shape the rearrangement landscape in MFI zeolites.

adsorption↗
DOE OSTI2022

Scaling Behavior of Thermally Driven Fractures in Deep Low‐Permeability Formations: A Plane Strain Model With 1‐D Heat Conduction

Abstract Injection of cold fluids through/into deep formations may cause significant cooling, thermal stress, and possible thermal fracturing. In this study, the thermal fracturing of low‐permeability formations under one‐dimensional heat conduction was investigated using a plane strain model. Dimensionless governing equations, with dimensionless fracture length , aperture , spacing , time , and effective confining stress , were derived. Solution of single thermal fracture was derived analytically, while solution of multiple fractures with constant (or dynamic) spacing were obtained using the displacement discontinuity method (and stability analysis). For single fracture, increases nonlinearly with and then transitions to scaling law , indicating that late‐time fracture length increases linearly with the square root of cooling time. For constantly spaced fractures, deviates from the single‐fracture solution at a later for a larger , showing slower propagation under inter‐fracture stress interaction . For dynamically spaced fractures, fracture arrest induced by stress interaction was determined by the stability analysis; the fully transient solution provides evolution of dimensionless fracture length, spacing, aperture, and pattern; a similar scaling law, with , obtained shows the effect of both stress interaction and fracture arrest. The solution and scaling law provide fast predictions for all reservoir and cooling conditions using (single) model parameter . Application to a geothermal site with demonstrates that thermal fractures reach 0.67, 6.25, and 78.00 m in length, 0.49, 2.30, and 13.00 m in spacing, and 0.43, 2.09, and 12.19 mm in aperture at 1, 100, and 10,000 days.

Chen, Bin↗
DOE OSTI2022

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronic tuning of confined sub-nanometer cobalt oxide clusters boosting oxygen catalysis and rechargeable Zn–air batteries.

Reasonable design of robust bifunctional oxygen catalysts from an electronic structure perspective is intriguing and challenging for the development of high active rechargeable zinc-air batteries (ZABs). In this study, the favorable regulation of the electronic structure of the cobalt oxide nanoclusters was firstly predicted by density functional theory (DFT) simulation, and then experimentally verified by confining sub-nanometer CoOx clusters (0.86 nm) into the small pore of ZIF-8 derived N-doped nanomaterials (PNC) using a microporous MOFs confinement strategy. The confined effect of the MOF micropores not only enhanced the stability of the subnanometer cobalt oxide clusters, but also make it coupled with Co-Nx to further regulate the electronic structure of the former, synergistic resulting in enhanced ORR/OER actives. As a result, the optimized 0.05CoOx@PNC catalyst demonstrates outstanding bifunctional oxygen performance with a smaller potential gap of 0.67 V. Moreover, the rechargeable Zn-air batteries integrated 0.05CoOx@PNC air cathode displays encouraging performance with a peak power density of 157.1 mW cm(-2), a specific capacity of 887 mAh g(Zn)(-1)at 10 mA cm(-2) and long-term cyclability for over 200 h, significantly outperforming the benchmark electrode couple consisted of Pt/C/RuO2. DFT calculation further revealed that reducing particle size and coupling with Co-N could effectively regulate the charge distribution of CoOx nanoclusters and downshift the D-band center of Co adsorption sites in CoOx nanoclusters, which reduced the reaction barrier of intermediate O-2* and OH* and ORR/ OER over potential, thus accelerating the overall ORR/OER kinetic process. This work offers a novel reference for the construction of a robust sub-nanometer cluster catalysts in the field of ZABs.

Bifunctional oxygen electrocatalysts↗
DOE OSTI2023

Effects of the surface termination and the oxygen vacancy position on LaNiO 3 ultra-thin films: First-principles study

In this study, while ultra-thin layers of the LaNiO 3 film exhibit a remarkable metal-insulator transition as the film thickness becomes smaller than a few unit cell (u.c.), the formation of possible oxygen vacancies and their effects on the correlated electronic structure have been rarely studied using first principles. Here, we investigate the effects of the surface termination and the oxygen vacancy position on the electronic properties and vacancy energetics of LaNiO 3 ultra-thin films under the compressive strain using density functional theory plus U (DFT + U). We find that oxygen vacancies can be easily formed in the Ni layers with the NiO 2 terminated surface (0.5 u.c. and 1.5 u.c. thickness) compared to the structures with the LaO terminated surface and the in-plane vacancy is energetically favored than the out-of-plane vacancy. When two vacancy sites are allowed, the Ni square plane geometry is energetically more stable in most cases as two oxygen vacancies tend to stay near a Ni ion. Strong anisotropy between the in-plane and out-of-plane vacancy formation as well as the layer and orbital dependent electronic structure occur due to strain, surface termination, charge reconstruction, and quantum confinement effects. The in-plane vacancy of the NiO 2 terminated structure is favored since the released charge due to the oxygen vacancy can be easily accommodated in the d x 2 -y 2 orbital, which is less occupied than the d z 2 orbital. Remarkably, the oxygen vacancy structure containing the Ni square-plane geometry becomes an insulating state in DFT + U with a sizable band gap of 1.2 eV because the large crystal field splitting between d z 2 and d x 2 -y 2 orbitals in the square-plane favors an insulating state and the Mott insulating state is induced in other Ni sites due to strong electronic correlations. In the thin-film structure without oxygen vacancies, the strong correlation effect in DFT + U drives a pseudogap ground state at the Fermi energy, similarly as the experimental photo-emission spectra; however, the variation of the DFT + U electronic structure depending on the surface termination becomes weaker compared to those obtained in DFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Copper-Based Catalysts Confined in Carbon Nanocage Reactors for Condensed Ester Hydrogenation: Tuning Copper Species by Confined SiO 2 and Methanol Resistance

Hydrogenation of aliphatic esters to natural alcohols is an important strategy for the efficient utilization of biomass-derived oils. The synthesis of highly active copper (Cu)-based catalysts is a challenge for condensed-phase ester hydrogenation due to the difficulties in controlling active sites and catalyst deactivation. In this work, a copper-based catalyst confined in a carbon nanocage reactor was successfully designed and prepared. The copper catalyst with 56 wt % SiO 2 exhibited the best performance because of the optimum proportion of Cu + and Cu 0 sites and high dispersion. The interaction between SiO 2 and Cu particles contributes to the formation of Cu + species, which is the key site for the adsorption of carbonyl groups. Meanwhile, the confinement effect of the carbon nanocages effectively inhibited the agglomeration of the copper particles. The catalysts exhibited not only excellent thermal stability but also superior methanol resistance in comparison with the Cu/SiO 2 catalyst. On the basis of the density functional theory (DFT) calculations results, methanol resistance should be attributed to the fewer hydroxyl groups on the catalyst surface, which increase the activation barrier for the dissociation of silica, allowing the stable holding of the copper species in the methanol solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Precision Structure Engineering of High-Entropy Oxides under Ambient Conditions

High-entropy oxides (HEOs) have unveiled a unique frontier in the realm of heterogeneous catalysis, taking advantage of the entropic effect and increased complexities to deliver ultrahigh stability and large tuning capability. However, current HEO synthesis mainly relies on high-temperature annealing approaches affording HEOs possessing no or low surface area, inferior active site exposure efficiency, and low controllability over the structure tuning. The grand challenge lies in producing high-quality HEO catalysts with high active site utilization efficiency, which relies on precision structure engineering, preferably under mild conditions. In this work, an in situ lattice engineering approach was developed to afford a supported HEO catalyst under ambient conditions. The HEO compositions (CuCoFeNiMnO x ) were uniformly integrated into the lattice of CeO 2 driven by cavitation-induced nucleation being generated via ultrasonication. The as-afforded catalysts were featured by high surface area, atomically dispersed HEO compositions, active redox properties, abundant oxygen vacancies (O V ), antiagglomeration, and high phase stability under harsh conditions. Compared with the ex situ introduction of HEO on the surface, the in situ method provides dual benefits to maintain the dispersity of HEO via entropic and lattice confinement effects. Engineering the complex HEO within the lattice of fluorite-structured CeO 2 also yields abundant defects (e.g., O V ) and active metal sites with strong reducing properties (e.g., Ce 3+ and Cu + ), which greatly improves the activity of the lattice oxygen and tunability of the adsorption behavior of the guest molecules, especially in the presence of impurities (e.g., water and propane). The catalytic performance of the supported HEO catalyst in oxidative procedures surpasses the pure dense phase HEO as well as the ex situ-generated catalysts. Further, the synthesis approach being developed in this work, together with the fundamental understanding in structure evolution and reaction mechanism, showcases a facile pathway under ambient conditions to generate stable catalysts capable of maintaining structural robustness in high-temperature conditions while delivering enhanced catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantum efficiency of InGaN–GaN multi-quantum well solar cells: Experimental characterization and modeling

InGaN-based multi-quantum well (MQW) solar cells are promising devices for photovoltaics (e.g., for tandem solar cells and concentrator systems), space applications, and wireless power transfer. In order to improve the efficiency of these devices, the factors limiting their efficiency and stability must be investigated in detail. Due to the complexity of a MQW structure, compared with a simple pn junction, modeling the spectral response of these solar cells is not straightforward, and ad hoc methodologies must be implemented. In this paper, we propose a model, based on material parameters and closed-formula equations, that describes the shape of the quantum efficiency of InGaN/GaN MQW solar cells, by taking into account the layer thickness, the temperature dependence of the absorption coefficient, and quantum confinement effects. We demonstrate (i) that the proposed model can effectively reproduce the spectral response of the cells; in addition, (ii) we prove that the bulk p-GaN layer absorbs radiation, but the carriers photogenerated in this region do not significantly contribute to device current. Finally, we show that (iii) by increasing the temperature, there is a redshift of the absorption edge due to bandgap narrowing, which can be described by Varshni law and is taken into account by the model, and a lowering in the extraction efficiency due to the increase in recombination (mostly Shockley–Read–Hall) inside the quantum wells, which is also visible by decreasing light intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Synergy of Ion Doping and Spiral Array Architecture on Ti 2 Nb 10 O 29 : A New Way to Achieve High-Power Electrodes

Ameliorating electronic/ionic transport and structural stability of electrode materials is important to the development of power-intensive lithium ion batteries. Despite its great potential as a high-power anode, titanium niobium oxide (Ti 2 Nb 10 O 29 , TNO) still underperforms due to its unsatisfactory electronic/ionic conductivity. In this work, a powerful synergistic strategy by combining ion doping and spiral array architecture to boost high-rate performance of TNO is reported. Cr 3+ doped TNO nanoparticles (Cr-TNO) of 5-10 nm intimately grow on a conductive vertical graphene@TiC-C (VGTC) skeleton, forming novel Cr-TNO@VGTC spiral arrays. The unique spiral growth of TNO is achieved due to the confinement effect of VGTC skeleton. Meanwhile, a more open TNO crystal structure with faster ion transfer paths and enhanced structural stability is realized by Cr 3+ doping, demonstrated via density functional theory calculation and in situ synchrotron X-ray diffraction technique. Benefiting from the superior conductive network, enhanced intrinsic electronic/ionic conductivity of Cr-TNO and reinforced structural stability, the Cr-TNO@VTC arrays show prominent high-power performance with a large capacity of 220 mAh g -1 at 40 C (power density of ≈11 kW kg -1 ) and superior durability (91% retention after 500 cycles). This work provides a new path for the construction of widespread high-power electrodes for fast energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2022

2D Oxides Realized via Confinement Heteroepitaxy

Novel confinement techniques facilitate the formation of non-layered 2D materials. Here it is demonstrated that the formation and properties of 2D oxides (GaO x , InO x , SnO x ) at the epitaxial graphene (EG)/silicon carbide (SiC) interface is dependent on the EG buffer layer properties prior to element intercalation. Using 2D Ga, it is demonstrated that defects in the EG buffer layer lead to Ga transforming to GaO x with non-periodic oxygen in a crystalline Ga matrix via air oxidation at room temperature. However, crystalline monolayer GaO 2 and bilayer Ga 2 O 3 with ferroelectric wurtzite structure(FE-WZ') can then be formed via subsequent high-temperature O 2 annealing. Furthermore, the graphene/X/SiC (X = 2D Ga or Ga 2 O 3 ) junction is tunable from Ohmic to a Schottky or tunnel barrier depending on the interface species. Finally, using vertical transport measurements and electron energy loss spectroscopy analysis, the bandgap of 2D gallium oxide is identified as 6.6 ± 0.6 eV, significantly larger than that of bulk β-Ga 2 O 3 (≈4.8 eV), suggesting strong quantum confinement effects at the 2D limit. Furthermore, the study presented here is foundational for development of atomic-scale, vertical 2D/3D heterostructure for applications requiring short transit times, such as GHz and THz devices.

2D gallium oxides↗
DOE OSTI2024

Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier

Nickel-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode offers high voltage and high specific capacity, making it promising for high energy density batteries. However, large-scale manufacturing of aqueous-processed NMC 811 electrodes remains challenging due to proton exchange causing material decomposition and capacity loss. This work addresses this issue by constructing an in situ nanocellulose protective layer for NMC 811 particles via electrostatic interactions during the slurry preparation. For the first time, the interatomic spacing between inter-chains of nanocellulose is measured through wide-angle X-ray scattering and demonstrate the ability to effectively confine interlayer water using atomistic simulations. Moreover, this nanocellulose coverage simultaneously minimizes Li + surface segregation and mitigates water infiltration. Owing to less material decomposition during the aqueous processing, nanocellulose-protected NMC electrodes exhibit higher initial coulombic efficiency (83% vs 62% at 0.1C) and capacity (133 vs 59 mAh g −1 at 6C) than unprotected electrodes. Additionally, optimized aqueous-processed NMC electrodes offer comparable or even superior electrochemical properties compared to the electrodes fabricated using the conventional toxic organic solvent, N-methyl-2-pyrrolidone. Consequently, the developed approach enables affordable, sustainable aqueous processing for Nickel-rich NMC 811 cathodes with excellent electrochemical performances.

25 ENERGY STORAGE↗
DOE OSTI2021

Quantifying Anionic Diffusion in 2D Halide Perovskite Lateral Heterostructures

Anionic diffusion strongly impacts the stability of halide perovskite materials, but it is still not well understood. Here, a quantitative investigation of in-plane thermally driven anionic inter-diffusion in a series of novel 2D and quasi-2D halide perovskites lateral heterostructures is reported. The calculated diffusion coefficients (D) reveal the inhibition of Br–I inter-diffusion with bulky π-conjugated organic cations compared with short-chain aliphatic organic cations. Furthermore, halide diffusion is found to be faster in quasi-2D (n > 1) than 2D perovskites (n = 1). The increment becomes less apparent as the “n” number increases, akin to the quantum confinement effect observed for band gaps. These trends are rationalized by molecular dynamics simulations of free energy barriers for halide diffusion that reveal mechanisms for suppressing diffusion. We report this work provides important fundamental insights on the anionic migration and diffusion process in halide perovskite materials.

2D materials↗