Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composite maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Pushing the limits: Resolving paleoseawater signatures in nanoscale fluid inclusions by atom probe tomography

New insight into the geochemistry of ancient environments can be gained through structural and chemical analyses of nanometer-scale features within minerals. Here, we present recent developments using atom probe tomography (APT) enabling direct visualization of nanoscale fluid inclusions trapped within pyrite (FeS 2 ) and thereby chemical characterization of remnant seawater. Pyrite framboids (spherical clusters of nanocrystals) were sampled from the Middle Devonian Leicester Pyrite Member (New York). Scanning transmission electron microscopy shows low density regions distributed within the pyrite consistent with nanoscale pores (<4 nm in size). APT 3D visualization and compositional mapping reveals that the nanopores are filled with water. The inclusions appear to preserve the elemental signature of the water column in which the framboids formed, specifically seawater components including Na, K, Mg, and Ca. Mg/Ca ratios within the pyrite were generally measured to be within 0.6±0.2 – consistent with calcite-dominated seawater conditions existing in the Middle Devonian. Furthermore, this study demonstrates the potential for a novel approach to reconstruct paleoenvironmental conditions from coupled elemental and structural analyses of nanoscale fluid inclusions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Atmospheric Rivers in the Eastern and Midwestern United States Associated With Baroclinic Waves

Atmospheric rivers (ARs) significantly impact the hydrological cycle and associated extremes in western continental regions. Recent studies suggest ARs also influence water resources and extremes in continental interiors. AR detection tools indicate that AR conditions are relatively frequent in areas east of the Rocky Mountains. The origin of these ARs, whether from synoptic-scale waves or mesoscale processes, is unclear. This study uses meteorological composite maps and transects of AR conditions during the four seasons. The analysis reveals that ARs east of the Rockies are associated with long-wave, baroclinic Rossby waves. This result demonstrates that eastern North American ARs are dynamically similar to their western coastal counterparts, though mechanisms for vertical moisture flux differ between the two. These findings provide a foundation for understanding future climate change and ARs in this region and offer new methods for evaluating climate model simulations.

58 GEOSCIENCES↗
DOE OSTI2025

PAVC: The foundation for a Pan-Arctic Vegetation Cover database

Field-measured Arctic vegetation cover data is essential for creating accurate, high-quality vegetation structure and composition maps. Extrapolating field data into high-resolution cover maps provides detailed, function-specific information for use in Earth System Models, vegetation classifications, and monitoring vegetation change over time and space. However, field campaigns that collect plant cover vary substantially in scope, method, and purpose, which makes them difficult to unify across data stores, and they are often not designed to meet remote sensing needs. In this work, we synthesized and harmonized field-based fractional cover data from various data stores to create a high-quality, consistent repository schema for remote sensing-based vegetation cover mapping applications. We developed a reproducible workflow for synthesizing visual estimate and point-intercept fractional cover data. The resultant Pan-Arctic Vegetation Cover (PAVC) database contains synthesized fractional cover at both the species and plant functional type levels. The latter includes absolute foliar cover for deciduous shrubs and trees, evergreen shrubs and trees, forbs, graminoids, lichen, bryophytes, and “other” vegetation, as well as absolute cover for litter and top cover for water and bare ground.

Steckler, Morgan R. [Oak Ridge National Laboratory↗
DOE OSTI2026

Patch-Based Convolutional Neural Networks for Multiple Microstructural Features Detection in FIB-SEM Micrographs of Irradiated Nuclear Fuel

Focused ion beam scanning electron microscopy (FIB-SEM) tomography has increasingly been utilized for acquiring three-dimensional (3D) microstructure features at the sub-micron scale in irradiated nuclear materials. This technique involves sequential ion beam slicing followed by electron beam imaging and compositional mapping using energy dispersive spectroscopy (EDS). Despite its growing use, several challenges persist. These include the time-intensive nature of data collection of EDS data, difficulties in distinguishing between various microstructures, and issues with image alignment. These challenges currently limit the broader application of FIB-SEM tomography in the field. To overcome these limitations, we propose using convolutional neural networks (CNNs) to automate microstructure identification in SEM images. Our study introduces a new framework for identifying microstructures in irradiated U-10Zr (wt. %) metallic fuel with limited annotated data. The framework includes the creation of a reliable annotated dataset with paired SEM and ground truth data from EDS maps, the applications of CNNs for microstructure identification, and the validation of model performance. Specifically, we employed the Segment Anything Model (SAM) to align SEM images with corresponding EDS maps and focused ion beam (FIB) tomography SEM data. We evaluate several models, including Patch-based U-Net, Attention U-Net, and Residual U-Net, finding that patch-based U-Net exhibits superior segmentation performance and consistency. This approach reduces reliance on EDS detectors and aids in accelerating nuclear material analysis process, highlighting the potential of advanced deep learning techniques to improve microstructural understanding in nuclear material. This is the first framework to integrate SAM and Patch-based CNN models for semantic segmentation of irradiated nuclear materials, with potential applicability to other tomography datasets.

36 - MATERIALS SCIENCE↗
DOE OSTI2026

Automated scanning probe microscopy of combinatorial ferroelectric libraries: Gaussian-process-guided exploration and noise-aware experiment planning

Combinatorial materials libraries provide an efficient route for mapping composition–property relationships, but their broader impact depends on rapid, quantitative, and functionally relevant characterization. Scanning Probe Microscopy (SPM), including piezoresponse force microscopy (PFM), offers significant potential for quantitative, functionally relevant combi-library readouts. Here, we implement a fully automated SPM workflow for ferroelectric combinatorial libraries and benchmark Gaussian-process-based Bayesian optimization strategies for autonomous experiment planning. The workflow integrates automated probe motion, contact optimization, imaging, and dual amplitude resonance tracking-PFM spectroscopy, and uses scalarized spectroscopic observables to guide subsequent measurements. Stage motion, probe engagement, in-contact tuning, imaging, spectroscopy, and the choice of the next measurement location all proceed without human input. We demonstrate the approach on Sm-doped BiFeO 3 and Zn x Mg 1−x O libraries. By comparing vanilla Bayesian optimization with a measured-noise variant, we show that explicit treatment of local reproducibility can improve modeling of composition-dependent response when the measured variance is physically meaningful, but can also reduce robustness when variability is dominated by outliers or topographic artifacts. Furthermore, these results establish automated SPM as a bridge between combinatorial synthesis and quantitative functional characterization.

Liu, Yu [University of Tennessee, Knoxville, TN (U↗
DOE OSTI2025

Interfacial alloying contributions to the magnetic proximity effect in Pt/dysprosium iron garnet

The magnetic proximity effect (MPE), a magnetic response from a heavy metal layer induced by an adjacent magnetic layer, plays an important role in the behavior of heavy-metal/ferro- or ferrimagnet thin film heterostructures. However, in the case of heavy-metal/rare earth iron garnet bilayers the presence and magnitude of the MPE has been debated. We previously reported an MPE in a Pt/dysprosium iron garnet (DyIG) heterostructure where the two layers were grown without breaking vacuum, finding that the magnetic moment present in the Pt layer scales with the magnitude of the DyIG moment and varies nonmonotonically through the DyIG compensation temperature. However, the origin of the magnetic signal from the Pt layer was not identified. In contrast, Pt/DyIG grown with a vacuum break did not exhibit an MPE. Here we investigate the origin of the magnetic moment in the Pt layer using x-ray absorption spectroscopy, x-ray circular dichroism, composition mapping and simulations of ion bombardment. In conclusion, the results are consistent with the presence of an intermixed Fe-Dy-Pt interfacial alloy layer formed during the growth of the Pt on the DyIG and resulting in a measurable MPE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Correlative X-ray micro-nanotomography with scanning electron microscopy at the Advanced Light Source

Geological samples are inherently multi-scale. Understanding their bulk physical and chemical properties requires characterization down to the nano-scale. A powerful technique to study the three-dimensional microstructure is X-ray tomography, but it lacks information about the chemistry of samples. To develop a methodology for measuring the multi-scale 3D microstructure of geological samples, correlative X-ray micro- and nanotomography were performed on two rocks followed by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis. The study was performed in five steps: (i) micro X-ray tomography was performed on rock sample cores, (ii) samples for nanotomography were prepared using laser milling, (iii) nanotomography was performed on the milled sub-samples, (iv) samples were mounted and polished for SEM analysis and (v) SEM imaging and compositional mapping was performed on micro and nanotomography samples for complimentary information. Correlative study performed on samples of serpentine and basalt revealed multiscale 3D structures involving both solid mineral phases and pore networks. Significant differences in the volume fraction of pores and mineral phases were also observed dependent on the imaging spatial resolution employed. This highlights the necessity for the application of such a multiscale approach for the characterization of complex aggregates such as rocks. Information acquired from the chemical mapping of different phases was also helpful in segmentation of phases that did not exhibit significant contrast in X-ray imaging. Adoption of the protocol used in this study can be broadly applied to 3D imaging studies being performed at the Advanced Light Source and other user facilities.

58 GEOSCIENCES↗
DOE OSTI2023

Mineralogy and petrology of fine‐grained samples recovered from the asteroid (162173) Ryugu

Abstract Samples returned from the carbonaceous asteroid (162173) Ryugu by the Hayabusa2 mission revealed that Ryugu is composed of materials consistent with CI chondrites and some types of space weathering. We report detailed mineralogy of the fine‐grained Ryugu samples allocated to our “Sand” team and report additional space weathering features found on the grains. The dominant mineralogy is composed of a fine‐grained mixture of Mg‐rich saponite and serpentine, magnetite, pyrrhotite, pentlandite, dolomite, and Fe‐bearing magnesite. These grains have mineralogy comparable to that of CI chondrites, showing severe aqueous alteration but lacking ferrihydrite and sulfate. These results are similar to previous works on large Ryugu grains. In addition to the major minerals, we also find many minerals that are rare or have not been reported among CI chondrites. Accessory minerals identified are hydroxyapatite, Mg‐Na phosphate, olivine, low‐Ca pyroxene, Mg‐Al spinel, chromite, manganochromite, eskolaite, ilmenite, cubanite, polydymite, transjordanite, schreibersite, calcite, moissanite, and poorly crystalline phyllosilicate. We also show scanning transmission electron microscope and scanning electron microscope compositional maps and images of some space‐weathered grains and severely heated and melted grains. Although our mineralogical results are consistent with that of millimeter‐sized grains, the fine‐grained fraction is best suited to investigate impact‐induced space weathering.

Geochemistry & Geophysics↗
DOE OSTI2024

Geothermal Play Fairway Analysis of Low-Temperature Resources for Sedimentary Basin Geothermal Play Types: An Example in the Denver Basin

This project is part of a nationwide effort to highlight the advantages of incorporating low-temperature geothermal resource evaluation into the implementation of combined heat and power (CHP), and geothermal direct use (GDU) technologies (e.g., space heating and/or cooling). The initiative aims to hasten the nation's decarbonization process by exploring the potential for using low-temperature geothermal resources (< 150 Degrees Celsius) in selected sedimentary basins that have several population centers. The Play Fairway Analysis (PFA) techniques were modified from earlier studies of sedimentary basin geothermal play types (SBGPTs) that assessed the viability of low-temperature resources. The decision-making process for leveraging low-temperature geothermal resources for GDU and CHP applications is complex and considers a variety of factors, including geological, economic, and risk criteria. This study covers workflows, relevant datasets, python code, and both common and composite maps used to create low-temperature geothermal resource favorability maps for the Denver Basin, which extends across Colorado, Nebraska, and Wyoming. The replication of these methodologies in other SBGPTs can evaluate potential for low-temperature resources. The proposed geothermal PFA approach for low-temperature geothermal resources includes: (1) identifying available relevant data and grouping data sets into PFA criteria (e.g., geological, economic, and risk criteria); (2) analyzing data gaps enable future focalized exploration; (3) performing uncertainty quantification; (4) weighting relevant data; (5) developing favorability and common risk maps for low-temperature geothermal resources to identify potential locations for more focused data collection. This project will facilitate future deployment of CHP and GDU by providing data, tools, and a workflow applicable to low-temperature geothermal resources in sedimentary basins.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Understanding Defect Activation and Kinetics in Next Generation CdTe Absorbers

This project investigated the role of defects and dopants in cadmium telluride (CdTe) solar cells to improve efficiency and long-term stability. Advanced X-ray microscopy and spectroscopy techniques were used to map composition, identify defect structures, and measure charge collection at the nanoscale. These experimental results were combined with computational modeling to understand how dopants such as copper and arsenic interact with other elements during processing. The study found that many dopants become electrically inactive due to the formation of complexes with chlorine and oxygen, limiting carrier concentration and device performance. It also showed that selenium, used to enhance efficiency, can migrate within the material during both manufacturing and operation, altering local structure and potentially affecting stability. The project developed new diagnostic and analysis tools for studying photovoltaic materials and provided a mechanistic understanding of key performance limitations. These insights support the development of more efficient, stable, and cost-effective CdTe solar technologies for large-scale energy deployment.

14 SOLAR ENERGY↗
DOE OSTI2025

HAMscope: a snapshot Hyperspectral Autofluorescence Miniscope for real-time molecular imaging

We introduce HAMscope, a compact, snapshot hyperspectral autofluorescence miniscope that enables real-time, label-free molecular imaging in a wide range of biological systems. By integrating a thin polymer diffuser into a widefield miniscope, HAMscope spectrally encodes each frame and employs a probabilistic deep learning framework to reconstruct 30-channel hyperspectral stacks (452-703 nm) or directly infer molecular composition maps from single images. A scalable multi-pass U-Net architecture with transformer-based attention and per pixel uncertainty estimation enables high spatio-spectral fidelity (mean absolute error ∼0.0048) at video rates. While initially demonstrated in plant systems, including lignin, chlorophyll, and suberin imaging in intact poplar and cork tissues, the platform is readily adaptable to other applications such as neural activity mapping, metabolic profiling, and histopathology. We show that the system generalizes to out-of-distribution tissue types and supports direct molecular mapping without the need for spectral unmixing. HAMscope establishes a general framework for compact, uncertainty-aware spectral imaging that combines minimal optics with advanced deep learning, offering broad utility for real-time biochemical imaging across neuroscience, environmental monitoring, and biomedicine.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1971

Apollo 15 X-ray fluorescence experiment

The X-ray fluorescence spectrometer, carried in the SIM bay of the command service module was employed principally for compositional mapping of the lunar surface while in lunar orbit, and secondarily, for X-ray astronomical observations during the trans-earth coast. The lunar surface measurements involved observations of the intensity and characteristics energy distribution of the secondary or fluorescent X-rays produced by the interaction of solar X-rays with the lunar surface. The astronomical observations consisted of relatively long periods of measurements of X-rays from pre-selected galactic sources such as Cyg-X-1 and Sco X-1 as well as from the galactic poles.

Adler, I.↗
NASA NTRS1973

Application of ERTS-1 imagery in the Vermont-New York dispute over pollution of Lake Champlain

The author has identified the following significant results. ERTS-1 imagery and a composite map derived from ERTS-1 imagery were presented as evidence in a U.S. Supreme Court case involving the pollution of an interstate water body (Lake Champlain). A pollution problem generated by a large paper mill forms the basis of the suit (Vermont vs. International Paper Co. and State of New York) and ERTS-1 imagery shows the effluent pattern on the lake surface as extending into Vermont during three different times.

Lind, A. O.↗
NASA NTRS1973

The Nimbus 5 data catalog. Volume 1: Data orbits 104 through 693, 19 December 1972 - 31 January 1973

Nimbus 5 was successfully launched from the Western Test Range at Vandenburg AFB, California, into a near circular orbit (1089 km x 1102 km) at 07 hr 56 min 00 sec GMT on 11 December 1972. All experiments and subsystems were successfully turned on. Satellite operations from launch (11 December) through orbit 103 (18 December) consisted of engineering evaluation of all spacecraft systems. As a result of that effort, data reception, accountability, and processing were intermittent during that period. Therefore, this catalog reflects documentation from orbit 104 (19 December 1972) through orbit 693 (31 January 1973). The pitch bias history, surface composition mapping radiometer, and infrared temperature profile radiometer are discussed.

Source record↗
NASA NTRS1975

Remote measurement of shoreline changes in coastal Alabama

It is shown that remotely sensed data, whether in digital or imagery form, provide objective, systematic measurements of coastal zone characteristics when compared with traditional measurement techniques. An example is given for Alabama shoreline parameters using LANDSAT 1 composite mapping.

Sapp, C. D.↗
NASA NTRS1977

A technique to correct for sample thickness variations for use with IDAPS X-ray radiograph analysis

The Image Data Processing System (IDAPS) at the Marshall Space Flight Center is used to analyze radiographs of metal samples to qualitatively and quantitatively map compositional variations across the samples. When the X-ray radiographs are of samples having thickness variations, corrections must be made to accomplish compositional analysis. A correction technique is described for cylindrical samples and is applied to radiographs of SPAR Experiment 74-18. Uncorrected and corrected images are shown.

Schafer, C. F.↗
NASA NTRS1981

Spectral mapping of Jupiter and the Galilean satellites in the near infrared

A near-infrared mapping spectrometer is included in the science complement of the Galileo Mission, which will explore Jupiter and its satellites in the mid-1980s. The objectives of the infrared mapping spectrometer experiment are to map compositional units on the surfaces of the Jovian satellites and to characterize the mineral content of these units. For Jupiter's atmosphere, this experiment will investigate such areas as cloud properties and the spatial and temporal variability of minor species. The instrument consists of a telescope, a plane grating spectrometer, a Si and InSb detector array, and a passive radiative cooler. The spectral range is 0.7-5.2 microns, covered with a resolution of 0.025 micron. A wobbling secondary mirror in the telescope provides one dimension of spatial scanning, while the other dimension is provided by motion of the spacecraft scan platform.

Carlson, R. W.↗