Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “communication instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

75 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

A 311-GHz Fundamental Oscillator Using InP HBT Technology

This oscillator uses a single-emitter 0.3- m InP heterojunction bipolar transistor (HBT) device with maximum frequency of oscillation (fmax) greater than 500 GHz. Due to high conductor and substrate losses at submillimeterwave frequencies, a primary challenge is to efficiently use the intrinsic device gain. This was done by using a suitable transmission-line media and circuit topology. The passive components of the oscillator are realized in a twometal process with benzocyclobutene (BCB) used as the primary transmission line dielectric. The circuit was designed using microstrip transmission lines. The oscillator is implemented in a common-base topology due to its inherent instability, and the design includes an on-chip resonator, outputmatching circuitry, and an injection-locking port, the port being used to demonstrate the injection-locking prin ciple. A free-running frequency of 311.6 GHz has been measured by down-converting the signal. Ad di tionally, injection locking has been successfully demonstrated with up to 17.8 dB of injection-locking gain. The injection-locking reference signal is generated using a 2 20 GHz frequency synthesizer, followed by a doubler, active tripler, a W-band amplifier, and then a passive tripler. Therefore, the source frequency is multiplied 18 times to obtain a signal above 300 GHz that can be used to injection lock the oscillator. Measurement shows that injection locking has improved the phase noise of the oscillator and can be also used for synchronizing a series of oscillators. A signal conductor is implemented near the BCP -InP interface and the topside of the BCB layer is fully metallized as a signal ground. Because the fields are primarily constrained in the lower permittivity BCB region, this type of transmission line is referred to as an inverted microstrip. In addition, both common-emitter and commonbase circuits were investigated to determine optimum topology for oscillator design. The common -base topology required smaller amount of feedback than the common-emitter design, therefore preserving device gain, and was chosen for the oscillator design. The submillimeter-wave region offers several advantages for sensors and communication systems, such as high resolution and all-weather imaging due to the short-wavelength, and improved communication speeds by access to greater frequency bandwidth. This oscillator circuit is a prototype of the first HBT oscillator operating above 300 GHz. Additional development is necessary to increase the output power of the circuit for radar and imaging applications.

Gaier, Todd↗
NASA NTRS2019

Cloud Computing Methods for Near Rectilinear Halo Orbit Trajectory Design

Complicated mission design problems require innovative computational solutions. As spacecraft depart from a proposed Gateway in a Near Rectilinear Halo Orbit (NRHO), recontact analysis is required to avoid risk of collision and ensure safe operations. Escape dynamics from NRHOs are governed by multiple gravitational bodies, yielding a trajectory design space that is exhaustively large. This paper summarizes the recontact analysis for departure from the NRHO and describes how the Deep Space Trajectory Explorer (DSTE) trajectory design software incorporates high performance cloud computing to compute and visualize the orbit design space. Recent focus on exploration missions to cislunar space has kindled accelerated interest in multibody orbit solutions. Trajectory analysis in the presence of multiple gravity fields is complex, and innovative computational tools are needed to simplify complicated design spaces, to generate large quantities of data quickly, and to visualize the output for user accessibility. The Gateway mission is a prime example. The Gateway1 is proposed as a human outpost in deep space. The current baseline orbit for the Gateway is a Near Rectilinear Halo Orbit (NRHO) near the Moon.2 The NRHO exists in a regime that experiences the gravitational effects of the Earth and the Moon simultaneously, complicating orbit analysis. The mission design process benefits greatly from updated computational tools for multibody missions like the Gateway. As an example, consider the problem of assessing the risk of collision in an NRHO. As a staging location to missions to the lunar surface and beyond the Earth-Moon system, the Gateway will experience spacecraft and other objects regularly arriving and departing. Departing objects potentially include spent logistics modules, visiting crew vehicles, debris objects, wastewater particles, and cubesats. Each departure is governed by the dynamics of the Gateway orbit and the surrounding dynamical environment. Over time, any unmaintained object in such an orbit eventually departs due to the small instabilities associated with the NRHOs. A separation maneuver speeds the departure from the NRHO, but the effects of the maneuver on the spacecraft behavior depend on the location, magnitude, and direction of the burn. Escape dynamics from the NRHO with regard to these maneuver options open up an enormous potential trajectory design space where subtle changes in input can produce dramatically large changes in the results. Any departing object must avoid recontacting the Gateway as it leaves the lunar vicinity, and a recontact analysis thus involves a significant number of computations and extensive output data. To explore the dynamics of this extensive design space, the Deep Space Trajectory Explorer3 (DSTE) trajectory design software incorporates new High Performance Computing (HPC) services and novel interactive visualizations. This paper details the HPC and cloud infrastructure techniques that are implemented in the DSTE, applying the new capabilities to analysis of recontact risk with the Gateway in NRHO. NEAR RECTILINEAR HALO ORBITS The Gateway is planned to fly in a lunar NRHO as its baseline orbit. The NRHO families of orbits are subsets of the larger halo families, which originate from planar orbits near the L1 and L2 libration points; the Earth-Moon L2 halo family appears in Figure 1. Each halo orbit is perfectly periodic in the Circular Restricted 3-Body Problem (CR3BP) and becomes a quasi-periodic orbit in a higher fidelity ephemeris force model. The NRHOs are defined as those members of the halo family with bounded stability properties;2 they pass near the Moon at perilune and are nearly polar. Families exist with apolunes located both above the lunar north pole and above the lunar south pole; the Gateway is planned to reside in a southern L2 NRHO in a 9:2 resonance with the lunar synodic period. The 9:2 NRHO is characterized by a period of about 6.5 days, a perilune radius of about 3,500 km, and an apolune radius of about 71,000 km; it is strongly affected by the gravity of both the Earth and the Moon simultaneously. This NRHO offers extended communications with assets on the south pole of the Moon,4 as well as low-cost orbit maintenance and attitude control,5 favorable eclipse avoidance properties,6 and inexpensive transfers from Earth and to other destinations.5,7 The NRHO portion of the southern L2 halo family is highlighted in black in Figure 1, and the 9:2 NRHO appears in blue.

Phillips, Sean M.↗
NASA NTRS2006

Pointing Reference Scheme for Free-Space Optical Communications Systems

A scheme is proposed for referencing the propagation direction of the transmit laser signal in pointing a free-space optical communications terminal. This recently developed scheme enables the use of low-cost, commercial silicon-based sensors for tracking the direction of the transmit laser, regardless of the transmit wavelength. Compared with previous methods, the scheme offers some advantages of less mechanical and optical complexity and avoids expensive and exotic sensor technologies. In free-space optical communications, the transmit beam must be accurately pointed toward the receiver in order to maintain the communication link. The current approaches to achieve this function call for part of the transmit beam to be split off and projected onto an optical sensor used to infer the pointed direction. This requires that the optical sensor be sensitive to the wavelength of the transmit laser. If a different transmit wavelength is desired, for example to obtain a source capable of higher data rates, this can become quite impractical because of the unavailability or inefficiency of sensors at these wavelengths. The innovation proposed here decouples this requirement by allowing any transmit wavelength to be used with any sensor. We have applied this idea to a particular system that transmits at the standard telecommunication wavelength of 1,550 nm and uses a silicon-based sensor, sensitive from 0.5 to 1.0 micrometers, to determine the pointing direction. The scheme shown in the figure involves integrating a low-power 980-nm reference or boresight laser beam coupled to the 1,550-nm transmit beam via a wavelength-division-multiplexed fiber coupler. Both of these signals propagate through the optical fiber where they achieve an extremely high level of co-alignment before they are launched into the telescope. The telescope uses a dichroic beam splitter to reflect the 980- nm beam onto the silicon image sensor (a quad detector, charge-coupled device, or active-pixel-sensor array) while the 1,550- nm signal beam is transmitted through the optical assembly toward the remotely located receiver. Since the 980-nm reference signal originates from the same single-mode fiber-coupled source as the transmit signal, its position on the sensor is used to accurately determine the propagation direction of the transmit signal. The optics are considerably simpler in the proposed scheme due to the use of a single aperture for transmitting and receiving. Moreover, the issue of mechanical misalignment does not arise because the reference signal and transmitted laser beams are inherently co-aligned. The beam quality of the 980-nm reference signal used for tracking is required to be circularly symmetric and stable at the tracking-plane sensor array in order to minimize error in the centroiding algorithm of the pointing system. However, since the transmit signal is delivered through a fiber that supports a single mode at 1,550 nm, propagation of higher order 980-nm modes is possible. Preliminary analysis shows that the overall mode profile is dominated by the fundamental mode, giving a near symmetric profile. The instability of the mode was also measured and found to be negligible in comparison to the other error contributions in the centroid position on the sensor array.

Wright, Malcolm↗