Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chemical homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Annealing effects in plated-wire memory elements. II - Recrystallization in Permalloy films.

Results of grain-size measurements in Permalloy platings suggest that recrystallization is possible at temperatures as low as 200 C, but that it is an extremely heterogeneous process. No worthwhile correlation was found to exist between observed grain size and magnetic dispersion in samples aged in the temperature range from 180 to 230 C. It is suggested that the magnetic aging which occurs under these conditions may be due to some other diffusion-controlled process than recrystallization; a process such as chemical homogenization is tentatively preferred.

Marquardt, S. J.↗

Planetary atmospheres.

Study of the composition of the atmospheres of the planets. Their wide variety is of interest in view of the fact that all nine planets were probably formed at the same time and out of the same chemically homogeneous mixture of gas and dust, i.e., the primitive solar nebula. The most likely explanation for this diversity in composition seems to be that the planetary atmospheres have undergone important evolutionary changes during their history of about 4.5 billion years. The early history of the earth's atmosphere is reviewed, as well as that of Venus and Mars. The most interesting aspect of Jupiter is that its present atmosphere seems to be composed of the same gases, hydrogen, methane, and ammonia, out of which the first living organisms are believed to have been synthesized on the earth.

Rasool, S. I.↗

Research study on materials processing in space, experiment M512

Gallium arsenide, a commercially valuable semiconductor, has been prepared from the melt (M.P. 1237C), by vapor growth, and by growth from metallic solutions. It has been established that growth from metallic solution can produce material with high, and perhaps with the highest possible, chemical homogeneity and crystalline perfection. Growth of GaAs from metallic solution can be performed at relatively low temperatures (about 600C) and is relatively insensitive to temperature fluctuations. However, this type of crystal growth is subject to the decided disadvantage that density induced convection currents may produce variations in rates of growth at a growing surface. This problem would be minimized under reduced gravity conditions.

Rubenstein, M.↗

Computational procedure for evaluation of space shuttle TPS requirements

The rudiments of a computational procedure are presented for predicting heat transfer rates to the windward pitchplane of a shuttle vehicle under conditions of nonequilibrium flow. The procedure involves computations in three regions of the flow field, namely, the stagnation region, inviscid flow region, and boundary layer region. The thermochemical state in the inviscid flow was calculated with the aid of correlations developed from shadowgraphs of shuttle configurations. The flow in the boundary layer and stagnation regions was computed with a nonequilibrium viscous layer code. For boundary layers, the outer edge thermochemical state was determined by matching the mass flow in the boundary layer with the mass flow represented by each inviscid streamline. Typical solutions are presented to show the effects of surface pressure, catalycity, and homogeneous chemical reactions on flow field variables and surface heat transfer rates.

Tong, H.↗

Influence of opacity on the pulsational stability of massive stars with uniform chemical composition. II - Modified Kramers opacity

The pulsational stability of massive, chemically homogeneous stars of Population I has been investigated for a range of simple opacity representations consisting of a straight sum of electron-scattering and modified Kramers opacity. The critical mass for stability against nuclear-energized pulsations is found to be extraordinarily sensitive to small changes in the coefficient and/or temperature exponent of the absorption part of the opacity law. A gradual increase in the atomic absorption (dominant near the stellar surface) first raises the critical mass, then restricts the upper mass limit for instability, and finally eliminates pulsational instability at all masses.

Sastri, V. K.↗

Zero-G processing of magnets experiment MA-070

Solidification of magnetic materials in the low gravity orbital environment was studied. The magnetic compounds under study, manganese bismuth and copper cobalt cerium ((Cu, Co)5Ce), both have the potential for the development of high coercive strength. Preliminary results indicate that static fluid configurations, in the absence of the gravitational body force, differ substantially from the documented terrestrial behavior. Chemical homogeneity is substantially enhanced on a macroscopic and microscopic level. Single crystal matrices have been grown in the coordinated growth regions of the flight samples. Primary crystals one order of magnitude greater than those grown terrestrially have been noted and are limited in size by the ampoule dimensions.

Larson, D. J., Jr.↗

Zero-G processing of magnets. Experiment MA-070

The magnetic compounds under study, manganese-bismuth (MnBi) copper-cobalt-cerium (Cu,Co)5Ce, are representative of magnetic alloy systems that have the potential for the development of high coercive strength and a high energy product. The samples of 50 at. % bismuth and 50 at. % manganese solidified in the low-g environment demonstrated a substantial improvement in the macroscopic chemical homogeneity. The bismuth/manganese-bismuth directionally solidified eutectic flight samples exhibited marked superior magnetic properties. Intrinsic coercive strengths in excess of 185 Koe have been measured in the low-g processed samples at 77 K. The average value of inductance was improved by 76 percent, and the energy product was improved by 57 percent. Additional results indicate that, in the near-absence of the gravitational body force, contained fluids will assume a lowest energy configuration that differs significantly from that found terrestrially.

Larson, D. J., Jr.↗

Boundary layer integral matrix procedure: Verification of models

The three turbulent models currently available in the JANNAF version of the Aerotherm Boundary Layer Integral Matrix Procedure (BLIMP-J) code were studied. The BLIMP-J program is the standard prediction method for boundary layer effects in liquid rocket engine thrust chambers. Experimental data from flow fields with large edge-to-wall temperature ratios are compared to the predictions of the three turbulence models contained in BLIMP-J. In addition, test conditions necessary to generate additional data on a flat plate or in a nozzle are given. It is concluded that the Cebeci-Smith turbulence model be the recommended model for the prediction of boundary layer effects in liquid rocket engines. In addition, the effects of homogeneous chemical reaction kinetics were examined for a hydrogen/oxygen system. Results show that for most flows, kinetics are probably only significant for stoichiometric mixture ratios.

Bonnett, W. S.↗

Nonradial pulsational instability of massive stars

Pulsational eigenfrequencies and stability coefficients of the lowest modes of nonradial quadrupole (l = 2) oscillation have been obtained for chemically homogeneous stellar models constructed with Carson's (1976) radiative opacities. Instability is found to develop as a result of the same operation of the kappa-mechanism in the CNO ionization zone and at nearly the same stellar masses as was the case for the radial (l = 0) modes studied previously. A survey of the l = 5 modes indicates that the instability gradually declines with increasing degree of the spherical harmonics.

Vemury, S. K.↗

Investigation of the Manicouagan impact crater, Quebec - An introduction

An interdisciplinary study of the 65-km diameter Manicouagan ring structure in Quebec was undertaken to gain insight into the integrated effects of impacts on terrestrial planetary bodies. The paper serves as an introduction to several companion papers and summarizes major conclusions. Studies of the 214 m.y. old structure show that the melt rocks are texturally inhomogeneous but chemically homogeneous and can be modeled as a mixture of target lithologies. The melt rocks have a Sr-87/Sr-86 ratio compatible with the melting of crustal rocks. The melt had a two-stage cooling history with clast-melt interactions indicative of mixing superheated silicate liquid with cold clasts. Grain size, clast reactions, and thermal equilibration of clasts and melts are described.

Phinney, W. C.↗

The ratio of carbon monoxide to molecular hydrogen in interstellar dark clouds

LTE (C-13)O column densities are compared with the corresponding values of beam-convolved visual extinction at more than 100 locations within 38 different interstellar dark clouds. A roughly linear correlation is found to exist between these two quantities for visual extinctions in the range from about 1.5 to 5 mag. It is argued that this correlation can be extended up to about 10 mag and that the standard gas-to-extinction ratio can be expected to remain valid in the sources studied. The correlation of LTE (C-13)O column density with visual extinction is used to obtain an equation for the H2 column density associated with a given (C-13)O column density. It is shown that if the clouds studied are assumed to be chemically homogeneous, the equation obtained implies that at least 12% of all gas-phase carbon is in the form of CO. Comparison of the observational data with various theories proposed for molecule formation in dark clouds indicates that Langer's (1977) ion-molecule scheme accounts well for the observations when the fractionation channel of Watson et al. (1976) is included.

Dickman, R. L.↗

The vertical distribution of tropospheric ammonia

A one-dimensional tropospheric photochemical model is used to simulate measured profiles of NH3 obtained with the Infrared Heterodyne Radiometer. The relative roles of homogeneous loss, heterogeneous loss, and vertical eddy transport are discussed in terms of selecting parameters which best fit the measurements. The best fit was obtained for a vertical eddy diffusion coefficient of 200,000/sq cm per sec or greater (corresponding to a characteristic vertical transport time in excess of about 35 days), and a characteristic heterogeneous loss time in excess of 10 days. The characteristic homogeneous chemical loss time was found to be about 40 days at the surface and decreased to about 180 days at 10 km, and not very sensitive to model chemical perturbations. Increased ground-level concentrations of NH3 to about 10 ppb, compared to background surface concentrations of about 1 ppb, were measured several weeks after application of ammonium nitrate fertilizer. This suggests that the volatilization of ammonium nitrate fertilizer is rapid, and an important source of NH3. Because of the characteristic times for the loss mechanisms, synoptic time-scale phenomena may play an important role in determining the tropospheric distribution of NH3 concentrations.

Levine, J. S.↗

Combustion at reduced gravitational conditions

The theoretical structures needed for the predictive analyses and interpretations for flame propagation and extinction for clouds of porous particulates are presented. Related combustion theories of significance to reduced gravitational studies of combustible media are presented. Nonadiabatic boundaries are required for both autoignition theory and for extinction theory. Processes that were considered include, pyrolysis and vaporization of particulates, heterogeneous and homogeneous chemical kinetics, molecular transport of heat and mass, radiative coupling of the medium to its environment, and radiative coupling among particles and volume elements of the combustible medium.

Berlad, A. L.↗

Thermal /Soret/ diffusion effects on interfacial mass transport rates

It is shown that thermal (Soret) diffusion significantly alters convective mass transport rates and important transition temperatures in highly nonisothermal flow systems involving the transport of 'heavy' species (vapors or particles). Introduction of the Soret transport term is shown to result in mass transfer effects similar to those of 'suction' and a homogeneous chemical 'sink'. It is pointed out that this analogy provides a simple method of correlating and predicting thermal diffusion effects in the abovementioned systems.

Rosner, D. E.↗

Origin and evolution of the giant planets

A discussion is presented of two major giant planet origin hypotheses: (1) protoplanet formation in the solar nebula in the form of a gravitationally unstable, gaseous subcondensation, subsequently evolving as a chemically homogeneous object until a stage at which a solid core may form; and (2) solid core formation by accumulation of planetesimals, followed by the accretion of solar-composition gas onto the core until it becomes unstable to collapse. Under either of the scenarios, evolution is found to comprise an early, cool phase in hydrostatic equilibrium, a hydrodynamic collapse, and a final phase of hydrostatic contraction and cooling to the present state. Attention is given to the physical processes that are most important in the determination of evolutionary characteristics. A concluding note on the cases of Uranus and Neptune is also given.

Bodenheimer, P.↗

The lower main sequence and the nature of secondary stars in ultracompact binaries

The possible nature of the secondary stars in ultracompact binary stellar systems (with orbital periods of less than about 1 hr) are systematically investigated. Using a simplified stellar evolution code, which assumes isentropic stellar models, nearly 3000 separate models for hydrogen-burning main-sequence stars with masses less than 0.3 solar mass are generated. The effects of the (homogeneous) chemical composition on the properties of such stars and in, particular, on the minimum main-sequence mass are explored in detail. It is found that this minimum mass is a sensitive function of the hydrogen content and can be as small as 0.035 solar mass. The properties of fully degenerate low-mass stars, as well as low-mass stars that are not in thermal equilibrium are also studied. In particular, it is shown that the thermal time scale of such nonequilibrium stars may exceed 10 billion yr. The results also confirm the existence of a second branch of the main sequence and shed new light on the thermal instability of this branch. The available observational information on the three known ultracompact binary systems (4U 1626-67, G61-29, 4U 1916-05) is summarized, and the results of the stellar model calculations are combined with the empirical results to place constraints on the properties of the secondary stars.

Rappaport, S.↗

Growth of Solid Solution Crystals

The major objective of this program is to determine the conditions under which single crystals of solid solutions can be grown from the melt in a Bridgman configuration with a high degree of chemical homogeneity. The central aim is to assess the role of gravity in the growth process and to explore the possible advantages for growth in the absence of gravity. The alloy system being investigated is the solid solution semiconductor with x-values appropriate for infrared detector applications in Hg sub (1-x) Cd sub x Te the 8 to 14 micro m wavelength region. Both melt and Te-solvent growth are being considered. The study consists of an extensive ground-based experimental and theoretical research effort followed by flight experimentation where appropriate. Experimental facilities have been established for the purification, casting, and crystal growth of the alloy system. Facilities have been also established for the metallurgical, compositional, electric and optical characterization of the alloys. Crystals are being grown by the Bridgman-Stockbarger method and are analyzed by various experimental techniques to evaluate the effects of growth conditions on the longitudinal and radial compositional variations and defect densities in the crystals.

Lehoczky, S. L.↗

Refractory amorphous metallic (W/0.6/ Re/0.4/)76B24 coatings on steel substrates

Refractory metallic coatings of (W/0.6/ Re/0.4/)76B24 (WReB) have been deposited onto glass, quartz, and heat-treated AISI 52100 bearing steel substrates by dc magnetron sputtering. As-deposited WReB films are amorphous, as shown by their diffuse X-ray diffraction patterns; chemically homogeneous, according to secondary ion mass spectrometry (SIMS) analysis; and they exhibit a very high (approximately 1000 C) crystallization temperature. Adhesion strength of these coatings on heat-treated AISI 52100 steel is in excess of approximately 20,000 psi and they possess high microhardness (approximately 2400 HV50). Unlubricated wear resistance of such hard and adherent amorphous metallic coatings on AISI 52100 steel is studied using the pin-on-disc method under various loading conditions. Amorphous metallic WReB coatings, about 4 microns thick, exhibit an improvement of more than two and a half orders of magnitude in the unlubricated wear resistance over that of the uncoated AISI 52100 steel.

Thakoor, A. P.↗