Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cell structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Self-consistent calculations and design considerations for a GaAs nipi doping superlattice solar cell

The authors present design constraints which show that a previously proposed GaAs nipi doping superlattice solar cell structure would not work as an efficient space solar cell. A structure based on the CLEFT process, which shows promise of being an efficient cell with very high radiation tolerance, is proposed. In order to test theoretically its viability and to optimize its design, self-consistent quantum mechanical calculations were made for a number of thicknesses of the n, i, and p layers and the dopings in the n and p layers. These results show that: 1) an i layer is not necessary; in fact, its presence makes it difficult to satisfy one of the key constraints; 2) a near-optimum design with 750-A thick n and p layers with dopings of 2.5E18/cu cm and a selective contact separation of 20 microns would yield both high efficiency and very high radiation tolerance.

Clark, Ralph O.↗

InGaAs/InP solar cells for space application

The effects of irradiation of In(0.53)Ga(0.47)As/InP (InGaAs/InP) solar cells illuminated through a transparent InP substrate with 1 MeV electrons were measured. These solar cells were developed for bottom cells in tandem solar photovoltaic cell structures. Some InGaAs/InP heterostructures with four layers were grown by liquid phase epitaxy. The structure of the solar cells allowed lightly doped materials in n and p photoactive layers to be used. The base dopant levels ranged from 1.10(exp 17) to 5.10(exp 17) cm(exp -3). The open circuit voltage and the short circuit current were moderately degraded after irradiation with 10(exp 16) cm(exp-2) 1 MeV electrons. This behavior is explained in terms of the device structure and the n and p layer thicknesses.

Karlina, L. B.↗

On the screech tones of supersonic rectangular jets

The shock cell structure and screech tone frequencies of nonaxisymmetric supersonic jets are examined. A linear shock cell model that utilizes a vortex sheet as the mixing layer of the jet is developed in order to estimate the characteristics of the shock structures and tone frequencies. Eigenvalue problems for rectangular and elliptical jets are solved, and shock cell structure solutions for the jets are derived. The shock cell spacings calculated with the model are compared to the data of Powell (1953) and Hammitt (1961); good correlation is obtained over a wide range of Mach numbers. The shock cell spacing formula is applied to the computation of screech tone frequencies of rectangular jets. It is observed that the calculated frequencies agree with the measurements of Powell and Krothapalli et. al. (1986) for the Mach number range 1.15-1.80.

Tam, C. K. W.↗

Chemical vapor deposition growth

The objective was to investigate and develop chemical vapor deposition (CVD) techniques for the growth of large areas of Si sheet on inexpensive substrate materials, with resulting sheet properties suitable for fabricating solar cells that would meet the technical goals of the Low Cost Silicon Solar Array Project. The program involved six main technical tasks: (1) modification and test of an existing vertical-chamber CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using impurity diffusion and other standard and near-standard processing techniques supplemented late in the program by the in situ CVD growth of n(+)/p/p(+) sheet structures subsequently processed into experimental cells.

Ruth, R. P.↗

Mechanoregulation of Proliferation, Differentiation, Senescence and Survival of Bone Marrow Primary Osteoprecursor Cells

Cell and animal studies conducted onboard the International Space Station and during the Shuttle program have provided extensive data illustrating bone degenerative responses to mechanical unloading in microgravity. Specifically CDKN1a/p21, an inhibitory modulator of cell cycle progression, is upregulated in osteoprecursor cells of the femur during 15-day spaceflight, suggesting that microgravity can block stem cell-based tissue regenerative process at the level of progenitor proliferation and differentiation. To study a potential role for CDKN1a/p21 in regulating osteogenic mechanosensitivity, we cultured primary bone marrow osteoprogenitor cells from CDKN1a/p21-null (p21-null) and wildtype mice with and without mechanical stimulation, and compared their morphological, proliferative, and in-vitro mineralization responses. Structural cell alterations due to mechanical stimulation were assessed by florescence labeling of f-actin cytoskeleton and focal adhesions. Mechanical stimulation of p21-null cells resulted in more pronounced cytoskeletal alignment with the axis of stretch than for wildtype cells. In addition, p21-null cells subjected to stretch loading also formed significantly more focal adhesions than wildtype cells. Combined these findings suggest that p21-null cells are structurally more responsive to stretch stimulation than the wildtype cells. Because osteoprogenitor cells are well known to respond to mechanical stimulation with increased proliferation, we also tested this response in p21-null cells. Results from those experiments show the proliferative capacity of mechanically stimulated p21-null cells far exceeded that of wildtype controls. Specifically, cell counts from 14, and 21 days post mechanical stimulation, show that p21- null cells to have a 4-fold increase in proliferation compared to wildtype. When the p21-null cell differentiation response to mechanical stimulation was evaluated, the p21-null cultuers elicited more extensive mineralization at earlier assessed timepoints than control cultures. Specifically, Von Kossa staining for mineralized matrix showed that the p21-null cells produced more than twice the mineralized surface area of wildtype cells, and at an earlier 7-day time point in culture. Taken together these results suggest that CDKN1a/p21 normally plays a role in negatively regulating osteoprogenitor proliferation and differentiation responses to mechanostimulation in bone. Findings of CDKN1a/p21's increased expression during spaceflight in microgravity also suggest not only a potential molecular mechanism for arresting regenerative bone growth in space, but potentially also a reduced impact for bone-formation-promoting exercise mechanostimulation. The findings described here constitute a novel role for p21 as a regulator of tissue regeneration in response to mechanical load stimulation, and also suggest a new promising molecular target to promote regenerative health in disuse conditions.

gravity↗

A multiple p-n junction structure obtained from as-grown Czochralski silicon crystals by heat treatment - Application to solar cells

Multiple p-n junctions have been prepared in as-grown Czochralski p-type silicon through overcompensation near the oxygen periodic concentration maxima by oxygen thermal donors generated during heat treatment at 450 C. Application of the multiple p-n-junction configuration to photovoltaic energy conversion has been investigated. A new solar-cell structure based on multiple p-n-junctions was developed. Theoretical analysis showed that a significant increase in collection efficiency over the conventional solar cells can be achieved.

Chi, J. Y.↗

A new electric field effect in silicon solar cells.

The phenomenon of high-resistivity silicon solar cells manifesting high open-circuit voltages previously observed only for cells made from low-resistivity silicon is shown to be caused by the presence of a shallow diffused region at the back surface of the cell. The basic cell structure is either n+, p, p+ or p+, n, n+. The high open-circuit voltage arises from the injection and accumulation of excess majority carriers in the bulk upon illumination or application of forward bias to the structure. A working model for the cell, designated a back surface field (BSF) cell, is described, and recent developments are cited.

Mandelkorn, J.↗

Progress research of non-Cz silicon material

The simultaneous diffusion of liquid boron and liquid phosphorus dopants into N-type dendritic silicon web for solar cells was investigated. It is planned that the diffusion parameters required to achieve the desired P(+)NN(+) cell structure be determined and the resultant cell properties be compared to cells produced in a sequential differential process. A cost analysis of the simultaneous junction formation process is proposed.

Campbell, R. B.↗

Electron irradiation effects in epitaxial InP solar cells

Performance data for InP-based solar cells after irradiation with 1-MeV electrons up to a fluence of 1 x 1016 e/cm2 are presented. Three InP cell structures are considered. Two of these have epitaxially grown active regions, these being a homojunction design and in ITO/InP structure. These are compared with ITO/InP cells without the epitaxial base region. The cell parameter variations, the influence of illumination during irradiation, and the effect on cell spectral response and capacitance measurements are discussed. Substantial performance recovery after thermal annealing at 90 C is reported.

Pearsall, N. M.↗

Shock structure in non-circular jets

The shock-cell structure of supersonic jets with non-circular exit geometry is modeled using a linearized analysis. The model takes into account the finite thickness of the jet shear layer using realistic velocity and density profiles. The effects of the shear layer turbulence are included by incorporating eddy-viscosity terms. A finite-difference numerical method is used to solve the steady linearized equations of motion. A body-fitted coordinate system is used to describe the shear layer. The variation of the pressure fluctuation with downstream distance is given for circular jets and for an elliptic jet of aspect ratio 2.0. Comparisons with experimental data are made. Difficulties with the numerical technique are also discussed.

Morris, Philip J.↗

Progress in p(+)n InP solar cells fabricated by thermal diffusion

In SPRAT XI, we proposed that p(sup +)n diffused junction InP solar cells should exhibit a higher conversion efficiency than their n(sup +)p counterparts. This was mainly due to the fact that our p(sup +)n (Cd,S) cell structures consistently showed higher V (sub OC) values than our n(sup +)p (S,Cd) structures. The highest V(sub OC) obtained with the p(sup +)n (Cd,S) cell configuration was 860 mV, as compared to the highest V(sub OC) 840 mV obtained with the n(sup +)p (S,Cd) configuration (AMO, 25 C). In this work, we present the performance results of our most recent thermally diffused cells using the p(sup +)n (Cd,S) structure. We have been able to fabricate cells with V(sub OC) values approaching 880 mV. Our best cell with an unoptimized front contact grid design (GS greater than or equal to 10%) showed a conversion efficiency of 13.4% (AMO, 25 C) without an AR coating layer. The emitter surface was passivated by a -50A P rich oxide. Achievement of such high V(sub OC) values was primarily due to the fabrication of emitter surfaces, having EPD densities as low as 2E2 cm(sup -2) and N(sub a)N(sub d) of about 3E18 cm (sup -3). In addition, our preliminary investigation of p(sup +)n structures seem to suggest that Cd-doped emitter cells are more radiation resistant than Zn-doped emitter cells against both high energy electron and proton irradiation.

Faur, Mircea↗

Analysis of epitaxial drift field N on P silicon solar cells

The performance of epitaxial drift field silicon solar cell structures having a variety of impurity profiles was calculated. These structures consist of a uniformly doped P-type substrate layer, and a P-type epitaxial drift field layer with a variety of field strengths. Several N-layer structures were modeled. A four layer solar cell model was used to calculate efficiency, open circuit voltage and short circuit current. The effect on performance of layer thickness, doping level, and diffusion length was determined. The results show that peak initial efficiency of 18.1% occurs for a drift field thickness of about 30 micron with the doping rising from 10 to the 17th power atoms/cu cm at the edge of the depletion region to 10 to the 18th power atoms/cu cm in the substrate. Stronger drift fields (narrow field regions) allowed very high performance (17% efficiency) even after irradiation to 3x10 to the 14th power 1 MeV electrons/sq cm.

Baraona, C. R.↗

A Cellular Backshell Concept for a Planetary Entry Vehicle

The development of an alternative, novel backshell concept to replace the traditional approach for the backshell of a planetary entry vehicle, was initiated in this study. The motivation was to determine if the novel concept, with the potential to provide significant improvements compared to the traditional approach, would be feasible. In initiating this effort, two cellular-type structures were chosen for evaluation. Preliminary structural finite element analysis models of just a single backshell panel were created for both a traditional design and the cellular concepts. Structural results revealed similar behavior for all the models. Although these initial results predicted higher mass values for the cellular structures, eventually adding more variables to the cell structure to further tailor the cellular concept, may significantly lower the mass predicted, and is justification for further study. Additionally, a novel approach to the thermal protection system of the cellular structures was proposed that included the use of advanced thermal blanket insulation. Thermal sizing analysis was performed for a simplified planetary entry heating condition producing a preliminary thermal design. However, further development and testing will be needed to determine if the proposed novel thermal protection approach, in conjunction with the cellular structure, would be an attractive alternative candidate backshell concept for future planetary entry vehicles.

Krings, Ethan↗

Development of high-efficiency solar cells on silicon web

Work was performed to improve web base material with a goal of obtaining solar cell efficiencies in excess of 18% (AM1). Efforts in this program are directed toward identifying carrier loss mechanisms in web silicon, eliminating or reducing these mechanisms, designing a high efficiency cell structure with the aid of numerical models, and fabricating high efficiency web solar cells. Fabrication techniques must preserve or enhance carrier lifetime in the bulk of the cell and minimize recombination of carriers at the external surfaces. Three completed cells were viewed by cross-sectional transmission electron microscopy (TEM) in order to investigate further the relation between structural defects and electrical performance of web cells. Consistent with past TEM examinations, the cell with the highest efficiency (15.0%) had no dislocations but did have 11 twin planes.

Meier, D. L.↗