Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

In-situ investigation of stress-induced martensitic transformation in Ti–Nb binary alloys with low Young's modulus [In-situ high-energy X-ray diffraction investigation on stress-induced martensitic transformation in Ti-Nb binary alloys]

Microstructure evolution, mechanical behaviors of cold rolled Ti-Nb alloys with different Nb contents subjected to different heat treatments were investigated. Here, optical microstructure and phase compositions of Ti-Nb alloys were characterized using optical microscopy and X-ray diffractometre, while mechanical behaviors of Ti-Nb alloys were examined by using tension tests. Stress-induced martensitic transformation in a Ti-30. at%Nb binary alloy was in-situ explored by synchrotron-based high-energy X-ray diffraction (HE-XRD). The results obtained suggested that mechanical behavior of Ti-Nb alloys, especially Young's modulus was directly dependent on chemical compositions and heat treatment process. According to the results of HE-XRD, α"-V1 martensite generated prior to the formation of α"-V2 during loading and a partial reversible transformation from α"-V1 to β phase was detected while α"-V2 tranformed to β completely during unloading.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bubble Point Measurements of Three Binary Mixtures of Refrigerants: R-32/1234yf, R-32/1234ze(E), and R-1132a/1234yf

In this article, bubble point pressures of three binary mixtures at two compositions each have been measured utilizing a static method. The mixtures studied were difluoromethane + 2,3,3,3-tetrafluoroprop-1-ene (R-32/1234yf), difluoromethane + (E)-1,3,3,3-tetrafluoroprop-1-ene (R-32/1234ze(E)), and 1,1-difluoroethene + 2,3,3,3-tetrafluoroprop-1-ene (R-1132a/1234yf). For all of the mixtures, the minimum temperature measured was 270 K. The maximum temperatures measured for the R-32/1234ze(E), R-32/1234yf, and R-1132a/1234yf mixtures were 360, 345, and 325 K, respectively. A total of 100 bubble point pressures are reported and compared to available literature data relative to the REFPROP database. Lemmon, E. W. [ NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, 10.0; National Institute of Standards and Technology, Standard Reference Data Program: Gaithersburg, 2018]. Additionally, the bubble point pressures obtained in this study are modeled using the perturbed-chain statistical associating fluid theory (PC-SAFT) equation of state. The PC-SAFT model parameters, as well as deviations of this work and literature data from the model, are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrasound-Assisted Nonthermal, Nonequilibrium Separation of Organic Molecules from Their Binary Aqueous Solutions: Effect of Solute Properties on Separation

The separation of organic molecules in downstream processes, such as distillation, plays a vital role in biobased chemical production. A comprehensive study was performed here using ultrasonic energy to separate 11 organic molecules from their binary aqueous solutions under nonthermal, nonequilibrium, and phase-change free conditions. A batch sonoseparator with a three-stage mist collection unit allowed direct analysis of ultrasound-generated mist with an HPLC/GC and differentiation and quantification of the vapor and mist. The results showed that the alcohols (1-butanol, ethanol, 1-propanol, and methanol) and acetone were enriched in the ultrasound-generated mist with enrichment ratios of 3.2–5. On the other hand, ethylene glycol, glycerol, γ-valerolactone (GVL), glucose, and sucrose were diluted with dilution ratios in the range of 2.04–15.7 in the mist and vapor generated by ultrasound (or concentrated in the bulk solution). No enrichment nor dilution of acetic acid was observed. The role of various physicochemical parameters such as dynamic viscosity, surface tension, Henry’s law of solubility constant, vapor pressure, and octanol–water partition coefficient in the enrichment was examined. Furthermore, the hydrophobicity of the organic molecules represented by the octanol–water partition coefficient was found to play a crucial role in determining the separation characteristics of the molecules in ultrasound-generated mist and vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Superior thermoelectric performance in PbTe-PbS pseudo-binary. Extremely low thermal conductivity and modulated carrier concentration

Lead chalcogenides have exhibited their irreplaceable role as thermoelectric materials at the medium temperature range, owing to highly degenerate electronic bands and intrinsically low thermal conductivities. PbTe-PbS pseudo-binary has been paid extensive attentions due to the even lower thermal conductivity which originates largely from the coexistence of both alloying and phase-separated precipitations. To investigate the competition between alloying and phase separation and its pronounced effect on the thermoelectric performance in PbTe-PbS, we systematically studied Spark Plasma Sintered (SPSed), 3 at% Na- doped (PbTe) 1-x (PbS)x samples with x=10%, 15%, 20%, 25%, 30% and 35% by means of transmission electron microscopy (TEM) observations and theoretical calculations. Corresponding to the lowest lattice thermal conductivity as a result of the balance between point defect- and precipitates- scattering, the highest figure of merit ZT~2.3 was obtained at 923 K when PbS phase fraction x is at 20%. The consistently lower lattice thermal conductivities in SPSed samples compared with corresponding ingots, resulting from the powdering and follow-up consolidation processes, also contribute to the observed superior ZT. Notably, the onset of carrier concentration modulation ~600 K due to excessive Na’s diffusion and re-dissolution leads to the observed saturations of electrical transport properties, which is believed equally crucial to the outstanding thermoelectric performance of SPSed PbTe-PbS samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

From binary to quaternary: high-tolerance of multi-acceptors enables development of efficient polymer solar cells [From binary to quaternary: high-tolerance of multi-acceptors enables efficient polymer solar cells]

For optimum coverage of the optical spectrum and further enhancement of the carrier transport, ternary and even more multi-composition strategies have been universally explored. As PC 71 BM and PC 61 BM are both compatible with PTB7-Th and IEICO-4F takes advantage of optical absorption in the near-infrared region, we combined PTB7-Th:IEICO-4F:PC 71 BM:PC 61 BM quaternary compositions to fabricate high-efficiency polymer solar cells (PSCs) with good tolerance ratios of the fullerene acceptors. After blending the fullerene alloys PC 71 BM and PC 61 BM into the host PTB7-Th:IEICO-4F system, the optical response in the whole wavelength regime has been strengthened with significantly enhanced electron mobility. Concomitantly, the short-circuit current density ( J sc ) surged from 22.07 to 24.37 mA cm –2 and the fill factor (FF) ascended from 58.24% to 69.30%, which finally resulted in a champion power conversion efficiency (PCE) of 12.52%, which is much higher than that of the binary control device (9.67%). This significant improvement is attributed to the fine-tuning of the morphology of the photo-active layer and feasible carrier transport. Interestingly, this finding implicates the synergistic effect of PC 71 BM and PC 61 BM to successfully enhancing the carrier transport. In addition, it demonstrates a broad tolerance of the acceptor proportions, resulting in higher PCE values for the quaternary devices as compared to the ternary devices. Lastly, generality for other systems evidences and provides guidelines for quaternary strategy utilization. Furthermore, the simplicity of quaternary strategies could be greatly beneficial to not yet elaborate commercial processes.

14 SOLAR ENERGY↗
DOE OSTI2014

Results of the swift monitoring campaign of the X-ray binary 4U 1957+11: constraints on binary parameters

We present new results of uniform spectral analysis of Swift/XRT observations of the X-ray binary system 4U 1957+11. This includes 26 observations of the source made between MJD 54282-55890 (2007 July 01-2011 November 25). All 26 spectra are predominantly thermal and can be modeled well with emission from an accretion disk around a black hole. We analyze all 26 spectra jointly using traditional χ{sup 2} fitting as well as Markov Chain Monte Carlo simulations. The results from both methods agree, and constrain model parameters like inclination, column density, and black hole spin. These results indicate that the X-ray emitting inner accretion disk is inclined to our line of sight by 77.6{sub −2.2}{sup +1.5} deg. Additionally, the other constraints we obtain on parameters such as the column density and black hole spin are consistent with previous X-ray observations. Distances less than 5 kpc are unlikely and not only ruled out based on our analysis but also from other independent observations. Based on model-derived bolometric luminosities, we require the source distance to be >10 kpc if the black hole's mass is >10 M {sub ☉}. If the hole's mass is <10 M {sub ☉}, then the distance could be in the range of 5-10 kpc.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Unusual Black Hole Binary LMC X-3: A Transient High-mass X-Ray Binary That Is Almost Always On?

We have analyzed a rich, multimission, multiwavelength data set from the black hole X-ray binary (BHXB) LMC X-3, covering a new anomalous low state (ALS), during which the source flux falls to an unprecedentedly low and barely detectable level, and a more normal low state. Simultaneous X-ray and UV/optical monitoring data from Swift are combined with pointed observations from the Rossi X-ray Timing Explorer (RXTE) and X-ray Multi-Mirror Mission (XMM-Newton) and light curves from the Monitor of All-Sky X-ray Image (MAXI) instrument to compare the source characteristics during the ALS with those seen during the normal low state. An XMM-Newton spectrum obtained during the ALS can be modeled using an absorbed power law with Γ=1.41±0.65 and a luminosity of 7.97×10{sup 33} erg s{sup −1} (0.6–5 keV). The Swift X-ray and UV light curves indicate an X-ray lag of ∼8 days as LMC X-3 abruptly exits the ALS, suggesting that changes in the mass accretion rate from the donor drive the X-ray lag. The normal low state displays an asymmetric profile in which the exit occurs more quickly than the entry, with minimum X-ray flux a factor of ∼4300 brighter than during the ALS. The UV brightness of LMC X-3 in the ALS is also fainter and less variable than during normal low states. The existence of repeated ALSs in LMC X-3, as well as a comparison with other BHXBs, implies that it is very close to the transient/persistent X-ray source dividing line. We conclude that LMC X-3 is a transient source that is almost always “on.”.

79 ASTRONOMY AND ASTROPHYSICS↗