Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “average atom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Composition of interstellar clouds in the disk and halo. 2: Gamma(sup 2) Velorum

High-resolution observations of gamma(sup 2) Vel with the Goddard High-Resolution Spectrograph (GHRS) echelle on the Hubble Space Telescope reveal the presence of seven narrow absorption components, with LSR velocities between -23 and +9 km s(exp -1). Three of these show column density ratios N(S(++))/N(S(+)) and N(P(++))/N(P+)) of about 1 or more, and can be identified as H II regions, while the other four are H I regions, consistent with the O I profile and with the overall H(sup 0) column density of 5.9 x 10(exp 19) cm(exp -2), given the usual assumptions that S is undepleted while O has a depletion D(O) = -0.3 dex. The depletions of Fe, Si, and Mn, which could be measure accurately for two of the four H I regions (components 6 and 7), differ somewhat from the values of D(sub ws) found for slowly moving warm clouds in HD 93521; in particular, for the component at 4.0 km s(exp -1) (No. 6), abosolute of D exceeds absolute of D(sub ws) by 0.1-0.4 dex, while for that at 9.3 km s(exp -1) (No. 7), absolute of D equals absolute of D(sub ws) on the average. The observed ratio of Fe + Mg atoms to Si atoms in the grains of component 6 is 2.04 +/-0.10, consistent with an olivine grain composition; the Fe/Mg ratio is 1.5 +/- 0.2. The electron density in component 6, determined from the C II(sup *) feature, is 0.075 +/- 0.013 cm (exp -3), about two-thirds of that found for clouds of this velocity in HD 93521. In the two conspicuous H II regions, components 3 and 4, n(sub e), determined from the Si II(sup *) feature, is about 1 cm(exp -3). From the column density of S(+) + S(++) in these two components, the total H II path length is about 40 pc. With the radius of a wind-blown bubble around gamma(sup 2) Vel set equal to 60 pc, the effective Stromgren radius is about 100 pc, requiring that T approx. equal to 50,000 K for the Wolf-Rayet component of the gamma(sup 2) Vel binary. Since zeta Pup is a comparable source of ionizing radiation, this temperature is an upper limit. The profiles of the strongest H2 absorption features, from Copernicus archives, indicate that the absorbing molecules have a mean velocity identical with that of the strongest H II component (No. 4). We have no explanation for the possible presence of these H2 molecules in a region of ionized H. Alternatively, the H2 profiles can be explained by molecules in the two adjacent (in velocity) H I regions, components 2 and 5, provided their H I gas has densities and temperatures typical of normal cold clouds. The GHRS data show absorption by highly ionized atoms Si(3+) and C(3+), N(4+) in broad features, in addition to the narrow-line absorption by Si(3+) and C(3+) observed in the dominant H II components, Nos. 3 and 4. The broad C(3+) and N(4+) features have widths corresponding to T in the range (4-8) x 10(exp 5) K, consistent with the broad O(5+) line shown in Copernicus data. Despite some observational uncertainties, the ratios of column densities in the broad C(3+), N(4+), and O(5+) features agree to +/- 0.1 dex with theoretical values for warm gas, heating and evaporating by thermal conduction from an adjacent hot region. Outward evaporation from an isolated cloud in a hot ambient gas cannot be distinguished, on the basis of these data, from inward evaporation of a warm shell, compressed by an expanding, hot stellar-wind bubble. For several halo stars, the C IV/O VI ratio has a quite different average value, perhaps consistent with cooling of infalling hot gas instead of conductive heating and evaporation.

Fitzpatrick, Edward L.↗
NASA NTRS1967

Lamb shift in the

Energy difference between metastable levels of hydrogen-like atom determined by measuring lifetime in electrostatic field, yielding average Lamb shift in Li ion

STARK EFFECT↗
NASA NTRS1975

A study of interstellar lines in the rocket spectrum of delta Scorpii

Ten interstellar lines in the vacuum UV spectrum of delta Sco are analyzed which were recorded on rocket spectrograms. Two cloud components are resolved which have Doppler widths of 1.55 km/sec (larger cloud) and 2.16 km/sec (smaller cloud). Column densities are derived for C I, C II, N I, O I, Al II, Si II, and Fe II, and abundances relative to atomic hydrogen are determined from them. Silicon and iron are found to be slightly overabundant relative to the solar abundances, while the other elements are underabundant by factors ranging from 1.8 to 8.6. Mean cloud densities of 250 and 150 per cu cm (for the larger and smaller clouds, respectively) are determined, and the average ratios of electron density to hydrogen-atom density are derived using the column densities of C I and C II. It is shown that the iron abundance can be decreased to less than the solar abundance by doubling the velocity dispersion of the iron ions.

Smith, A. M.↗
NASA NTRS1975

The isotopic composition of galactic cosmic-ray lithium, beryllium, and boron

The isotopes of cosmic-ray Li, Be, and B near 100 MeV per nucleon have been measured with cosmic-ray telescopes on board the IMP-7 and IMP-8 satellites during 1973 and 1974. The measured isotopic abundances provide a stringent test for models of interstellar propagation and solar modulation. It is found that the isotopic abundances can be explained using a steady-state interstellar propagation model with a 5-g/sq cm leakage mean free path. These results, taken along with Be-10 abundance measurements, indicate a longer lifetime for cosmic rays than that predicted by the usual assumption of an average interstellar density of 1 to 3 atoms per cu cm.

Garcia-Munoz, M.↗
NASA NTRS1979

Solar wind latitudinal variations deduced from Mariner 10 interplanetary H /1216 A/ observations

The Mariner 10 H (1216-A) interplanetary observations are examined by using models that consider anisotropies in the solar fluxes. It is verified that the dominant contribution to asymmetric structure in the Mariner 10 H (1216-A) data is a latitudinal variation of the solar-wind flux and of the solar wind velocity, leading to a hydrogen atom lifetime that is latitude dependent. The average lifetime at 1 AU is found to increase from the solar equator to the solar poles by about 25%. This allows interstellar hydrogen to penetrate closer to the solar poles than to the equator. A general analytic model is constructed for evaluating the neutral hydrogen density distribution in interplanetary space. This model takes into account the latitude-dependent ionization rate. When this model is applied to the Mariner 10 H (1216-A) data, it is shown to be capable of matching the observations with a statistical accuracy of 5%. The effect of this latitudinal variation on H (1216-A) sky background maps is to produce a latitudinal shift in the maximum toward the north ecliptic pole.

Witt, N.↗
NASA NTRS1982

Intense Ly-alpha emission from Uranus

The existence of intense atomic hydrogen Ly-alpha emission from Uranus is demonstrated here by utilizing the monochromatic imaging capabilities of the International Ultraviolet Explorer (IUE) spectrograph. Observations show increased emission in the vicinity of Uranus superimposed on the geocoronal/interplanetary background. If resonant scattering of solar Ly-alpha is the source of the 1.6 + or - 0.4 kR disk averaged brightness, then very high column densities of atomic H above the absorbing methane are required. Precipitation of trapped charged particles, i.e., aurora, could explain the emissions. This would imply a planetary magnetic field.

Durrance, S. T.↗
NASA NTRS1983

Helium on Venus - Implications for uranium and thorium

Helium is removed at an average rate of 10 to the 6th atoms per square centimeter per second from Venus's atmosphere by the solar wind following ionization above the plasmapause. The surface source of helium-4 on Venus is similar to that on earth, suggesting comparable abundances of crustal uranium and thorium.

Prather, M. J.↗
NASA NTRS1984

Chondrules in the bishunpur L13 chondrite

Twenty-six chondrules, chondrule fragments or clasts were analyzed. An automated wavelength dispersive instrument with a 90 micrometer beam integrated a series of analyses in traverses across each object. Depending on the size of the cross-sectional area, from 1 to 21 analyses were performed for each bulk analysis. Si, Ti, Al, Cr, Fe, Ni, Mn, Mg, Ca, Na, K and S were determined, and an analyzed augite was used as a secondary standard before and after each set of analyses. The work is part of a study of chondrule rims, interchondrule matrix, chondrules and clasts in unequilibrated ordinary chondrites. Only two of the twenty-six objects analyzed have Ca/Al atomic ratios greater than the ordinary chondritic average of 0.74. The bulk meteorite has a normal Ca/Al ratio, so presumably a Ca-rich, Al-poor component must be present to compensate for chondrules and chlasts. This component is unlikely to be rim or matrix, but may be phosphate associated with metal or sulphide. Na/Al ratios range from 1 to almost zero, but there is no hiatus as in a suite of Manych chondrules and glasses.

Hutchison, R.↗
NASA NTRS1985

Preparation and analysis of particulate metal deposits

Small particles and clusters of palladium were grown by deposition from the vapor phase under ultrahigh vacuum conditions. Amorphous and crystalline support films of Al2O3 and ultrathin amorphous carbon films were used as substrate materials. The growth of the metal deposit was monitored in situ by scanning transmission diffraction of energy-filtered 100 kV electrons and high resolution transmission electron microscopy (TEM) analysis was performed in a separate instrument. It was established by in situ TEM, however, that the transfer of specimens in this case did not unduly affect the size and distribution of deposit particles. It was found that the cleanness, stoichiometry, crystallinity and structural perfection of the support surface play an essential role in determining the crystalline perfection and structure of the particles. The smallest palladium clusters reproducibly prepared contained not more than six atoms but size determinations below 1 nm average particle diameter are very problematic with conventional TEM. Palladium particles grown on carbon supports feature an impurity-stabilized mosaic structure.

Poppa, H.↗
NASA NTRS2000

Atomic-Based-Combined-Cycle Analysis

Atomic-based-combined-cycle (ABCC) engine combines an air-breathing ramjet engine with an atomic reactor to increase the mission-averaged specific impulse and thereby increasing the dry-mass ratio. ABCC engine is similar to RBCC engine except that energy needed for the propulsive power is derived from nuclear reaction rather than chemical combustion used in the RBCC engine. The potential performance improvement of an ABCC engine over a RBCC engine comes from two factors. Firstly, the energy density of nuclear reaction is several order of magnitudes higher than the chemical combustion. Secondly, hydrogen can produce much higher nozzle exit velocity because of its small molecular weight. A one-dimensional, transient numerical model was used to analyze a generic scramjet engine and it is used as a baseline to evaluate an imaginary ABCC engine performance. A nuclear reactor is treated as a black box energy source that replaces the role of the primary rocket and the chemical combustion chamber in a RBCC engine. Hydrogen is heated by the reactor and accelerated to produce high-speed ejection velocity. The ejection velocity up 10,000 m/sec is theoretically possible because of high energy density from the reactor and large gas constant of the hydrogen. Oxygen contained in the entrained air reacts with hydrogen and produces propulsive power for ejector mode operation. To provide enough thrust for initial acceleration, relatively large amount of hydrogen must be pumped through the reactor. Amount of oxygen contained in the entrained air may not be sufficient to burn all hydrogen and consequently combustion could occur at the end of exit nozzle. It is assumed that this combustion process is constant-pressure combustion at 1.0 atmospheric pressure and thus not affects the nozzle exit condition.

Han, Sam↗
NASA NTRS1999

Hierarchical Approach to 'Atomistic' 3-D MOSFET Simulation

We present a hierarchical approach to the 'atomistic' simulation of aggressively scaled sub-0.1 micron MOSFET's. These devices are so small that their characteristics depend on the precise location of dopant atoms within them, not just on their average density. A full-scale three-dimensional drift-diffusion atomistic simulation approach is first described and used to verify more economical, but restricted, options. To reduce processor time and memory requirements at high drain voltage, we have developed a self-consistent option based on a solution of the current continuity equation restricted to a thin slab of the channel. This is coupled to the solution of the Poisson equation in the whole simulation domain in the Gummel iteration cycles. The accuracy of this approach is investigated in comparison to the full self-consistent solution. At low drain voltage, a single solution of the nonlinear Poisson equation is sufficient to extract the current with satisfactory accuracy. In this case, the current is calculated by solving the current continuity equation in a drift approximation only, also in a thin slab containing the MOSFET channel. The regions of applicability for the different components of this hierarchical approach are illustrated in example simulations covering the random dopant-induced threshold voltage fluctuations, threshold voltage lowering, threshold voltage asymmetry, and drain current fluctuations.

Asenov, Asen↗
NASA NTRS1999

Atomic-Based-Combined-Cycle Analysis

Atomic-based-combined-cycle (ABCC) engine combines an air-breathing ramjet engine with an atomic reactor to increase the mission-averaged specific impulse and thereby increasing the dry-mass ratio. ABCC engine is similar to RBCC engine except that energy needed for the propulsive power is derived from nuclear reaction rather than chemical combustion used in the RBCC engine. The potential performance improvement of an ABCC engine over a RBCC engine comes from two factors. Firstly, the energy density of nuclear reaction is several order of magnitudes higher than the chemical combustion. Secondly, hydrogen can produce much higher nozzle exit velocity because of its small molecular weight. A one-dimensional, transient numerical model was used to analyze a generic RBCC engine and it is used as a baseline to evaluate an imaginary ABCC engine performance. A nuclear reactor is treated as a black box energy source that replaces the role of the primary rocket and the chemical combustion chamber in a RBCC engine. The performance of a generic ABCC engine along a flight path (q0 =10 (exp 3) lbf per square ft) shows that the mission averaged-specific impulse is about twice larger than RBCC engine and the dry mass-ratio is about 50% larger. Results of the present ABCC engine performance are based on the assumptions that the flow passage of working fluids is identical to that of RBCC engine and that a nuclear reactor is treated as an energy black box. Preliminary heat transfer calculation shows that the rate of heat transfer to the working fluids is within the limit of turbulent convective heat transfer regimes. The flow passage of realistic ABCC engine must be known for a better prediction of ABCC engine performance. Also, critical heat transfer calculations must be performed for the ejector mode and ramjet mode operations. This is possible only when the details of a reactor configuration are available.

Han, Samuel S.↗
NASA NTRS1976

Formation of the 0.511 MeV line in solar flares

The slowing down and annihilation of positrons and the formation of positronium in a solar flare plasma are investigated to determine how the width of the 0.511-MeV line and its strength relative to the three-photon continuum from positronium decay depend on the temperature and density of the medium in which the positron comes to rest. The calculations are limited to the cases of annihilation in a completely ionized plasma, in a partially ionized plasma with an electron/neutron density ratio of 1.0 or 0.1, and in an atomic gas with a very small ion density. Thermally averaged rate coefficients are obtained for the free annihilation of positrons and for positronium formation through radiative recombination in the fully ionized plasma. Positronium formation rates and the resultant energy distributions of the positronium atoms in the partially ionized medium are determined by numerically solving the Fokker-Planck equation in a medium where the ambient free electrons have a Maxwell-Boltzmann distribution of finite temperature but the density of the medium is sufficiently low that positronium atoms decay without further collisions following their formation. A Monte Carlo calculation is performed for the positron energy loss, positronium formation through charge exchange, and positronium breakup in the weakly ionized medium. The energy distributions of decaying positronium atoms and the relative number of triplet to singlet positronium decays are evaluated for ion concentrations and densities characteristic of the solar photosphere.

Crannell, C. J.↗
NASA NTRS1976

Ultraviolet observations of local gas

From satellite measurements of ultraviolet spectra of stars, an average density of approximately 1.1/cu cm for hydrogen atoms, in both atomic and molecular form, is estimated for regions of space along the galactic plane within about 1 kpc of the sun. About 20% of the atoms are bound in molecular form although this figure is uncertain since the ultraviolet measurements avoid the very dense interstellar clouds. Discrete values for this percentage are observed to vary markedly; regions with less than average density seem to have fractional abundances of H2 several orders of magnitude lower than average. A ratio of CO/H is observed for regions in front of stars observed by the Copernicus satellite.

Jenkins, E. B.↗
NASA NTRS1977

Ultraviolet observations of local gas

From satellite measurements of ultraviolet spectra of stars, an average density of approximately 1.1 cu m/sec for hydrogen atoms, in both atomic and molecular form, is estimated for regions of space along the galactic plane within about 1 kpc of the sun. About 20 percent of the atoms are bound in molecular form, although this figure is uncertain because the ultraviolet measurements avoid the very dense interstellar clouds. Discrete values for this percentage are observed to vary markedly; regions with less than average density appear to have fractional abundances of H2 several orders of magnitude lower than average. A ratio of CO/H which ranges from 10 to the minus 9th to 10 to the minus 6th power is observed for regions in front of stars observed by the Copernicus satellite.

Jenkins, E. B.↗
NASA NTRS1999

TiCl, TiH and TiH+ Bond Energies, a Test of a Correlation Consistent Ti Basis Set

Correlation consistent basis sets are developed for Ti atom. The polarization functions are optimized for the average of the 3F and 5F states. One series of correlation consistent basis sets is for 3d and 4s correlation, while the second series includes 3s and 3p correlation as well as 3d and 4s correlation. These basis sets are tested using the Ti 3F-5F separation and the dissociation energies of TiCl X4Phi, TiH X4Phi, and TiH(+) X3Phi. The CCSD(T) complete basis set limit values are determined by extrapolation. The Douglas Kroll approach is used to compute the scalar relativistic effect. Spin-orbit effects are taken from experiment and/or computed at the CASSCF level. The Ti 3F-5F separation is in excellent agreement with experiment, while the TiCl, TiH, and TiH(+) bond energies are in good agreement with experiment. Extrapolation with the valence basis set is consistent with other atoms, while including 3s and 3p correlation appears to make extrapolation.

Bauschlicher, Charles W., Jr.↗
NASA NTRS1989

Numerical simulations of the seasonal/latitudinal variations of atomic oxygen and nitric oxide in the lower thermosphere and mesosphere

A 2-Dimensional zonally-averaged thermospheric model and the global University College London (UCL) thermospheric model have been used to investigate the seasonal, solar activity and geomagnetic variation of atomic oxygen and nitric oxide. The 2-dimensional model includes detailed oxygen and nitrogen chemistry, with appropriate completion of the energy equation, by adding the thermal infrared cooling by O and NO. This solution includes solar and auroral production of odd nitrogen compounds and metastable species. This model has been used for three investigations; firstly, to study the interactions between atmospheric dynamics and minor species transport and density; secondly, to examine the seasonal variations of atomic oxygen and nitric oxide within the upper mesosphere and thermosphere and their response to solar and geomagnetic activity variations; thirdly, to study the factor of 7 to 8 peak nitric oxide density increase as solar F sub 10.7 cm flux increases from 70 to 240 reported from the Solar Mesospheric Explorer. Auroral production of NO is shown to be the dominant source at high latitudes, generating peak NO densities a factor of 10 greater than typical number densities at low latitudes. At low latitudes, the predicted variation of the peak NO density, near 110 km, with the solar F sub 10.7 cm flux is rather smaller than is observed. This is most likely due to an overestimate of the soft X-ray flux at low solar activity, for times of extremely low support number, as occurred in June 1986. As observed on pressure levels, the variation of O density is small. The global circulation during solstice and periods of elevated geomagnetic activity causes depletion of O in regions of upwelling, and enhancements in regions of downwelling.

Rees, D.↗