Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “angular deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Excited states in {sup 99}Pd

Excited states in the {sup 99}Pd nucleus populated in the {sup 75}As({sup 28}Si, p3n) fusion-evaporation reaction at E{sub lab}=120 MeV have been investigated through in-beam {gamma}-ray spectroscopic techniques using an array of Compton-suppressed clover detectors. The level scheme is established up to excitation energy {approx}11.5 MeV and spin {approx}25({h_bar}/2{pi}) with the addition of about 60 new transitions. The level structures observed in {sup 99}Pd have been interpreted in the framework of a microscopic theory based on the deformed Hartree-Fock and angular momentum projection techniques. Band structures at lower spins are based on the low-{Omega} {nu}g{sub 7/2} and {nu}d{sub 5/2} orbitals, and those at higher spins are reproduced for the {pi}(g{sub 9/2}){sup 5} x {pi}(g{sub 7/2}) x {nu}(g{sub 7/2}){sup 2} x {nu}(h{sub 11/2}){sup 2} x {nu}(g{sub 9/2}){sup -1} and {pi}(g{sub 9/2}){sup 6} x {nu}(g{sub 9/2}){sup 10} x {nu}(g{sub 7/2}){sup 2} x {nu}(h{sub 11/2}) configurations. The octupole correlations in {sup 99}Pd have been inferred from new interband E1 transitions linking the {Delta}I=1 states of the bands based on the {nu}h{sub 11/2} and {nu}d{sub 5/2} orbitals ({Delta}l=3, {Delta}j=3, and {Delta}{pi}=-1) with the deduced B(E1) values {approx}10{sup -6} W.u.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High Resolution Mapping of Orientation and Strain Gradients in Metals by Synchrotron 3D X-ray Laue Microdiffraction

Synchrotron 3D X-ray Laue microdiffraction, available at beamline 34-ID-E at Advanced Photon Source in Argonne National Laboratory, is a powerful tool for 3D non-destructive mapping of local orientations and strains at sub-micron scale in the bulk. With this technique, it is possible to study local residual stresses developed during manufacturing or while in service due to interactions between, for example, different phases and/or grains with different orientations in materials containing multiple or single phase(s). Such information is essential for understanding mechanical properties and designing advanced materials, but is largely non-existent in the current generation of materials models. In the present paper, the principle and experimental set-up of the 3D microdiffraction are introduced, followed by a description of a method for quantification of the local plastic deformation based on high-angular-resolution orientation maps. The quantification of local residual stresses in two model materials, ductile cast iron (two phases) and partially recrystallized pure nickel (single phase), using 3D microdiffraction will then be presented. The results show that 3D microdiffraction is important for understanding the origin of local residual stresses and to relate them to the microstructural evolution. Finally, the limitations of the 3D microdiffraction on the current generation synchrotron source and new possibilities after the synchrotron upgrade are discussed.

36 MATERIALS SCIENCE↗

Formation Mechanism of Nanoscale Al{sub 3}Fe Phase in Al-Fe Alloy During Semisolid Forming Process

The formation mechanism of nanoscale Al{sub 3}Fe phase in Al-1Fe (wt pct) alloy during rheo-extrusion was investigated, and the mechanical property of the prepared alloy was also measured. The results show that the average length of Al{sub 3}Fe phase in Al-1Fe alloy prepared by rheo-extrusion is 300 nm, which is much more refined than the needlelike Al{sub 3}Fe phase in as-cast Al-1Fe alloy (50 μm). In rheo-extrusion, Al{sub 3}Fe phase formed by eutectic reaction is bonelike, but it could be continuously refined by the shear deformation in the wheel groove, in equal channel angular flow, and in expansion extrusion mold. The total equivalent strain of the shear deformation is higher than 4.82. The tensile strength and elongation of Al-1Fe alloy prepared by rheo-extrusion are 135 MPa and 30 pct, respectively. The tensile strength of Al-1Fe alloy prepared by rheo-extrusion is 58.8 pct higher than that of as-cast Al-1Fe alloy, and the elongation is 19 pct higher than that of as-cast Al-1Fe alloy. Compared with as-cast Al-1Fe alloy, the improvements of tensile strength and elongation caused by shear deformation in rheo-extrusion are higher than the reported improvements induced by rare earth modification.

36 MATERIALS SCIENCE↗

Spontaneous breaking of rotational symmetry in rotating solitons: A toy model of excited nucleons with high angular momentum

We study the phenomenon of spontaneous breaking of rotational symmetry in the rotating solutions of two types of baby Skyrme models. In the first, the domain is a two-sphere, and in the other, the Skyrmions are confined to the interior of a unit disk. Numerical full-field results show that when the angular momentum of the Skyrmions increases above a certain critical value, the rotational symmetry of the solutions is broken and the minimal-energy configurations become less symmetric. We propose a possible mechanism as to why spontaneous breaking of rotational symmetry is present in the rotating solutions of these models, while it is not observed in the 'usual' baby Skyrme model. Our results might be relevant for a qualitative understanding of the nonspherical deformation of excited nucleons with high orbital angular momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamics of Tisserand's frame for an elastic spacecraft with stored angular momentum

Tisserand's frame represents a frame in which the deformations in elastic members and the motions in a central rigid body add zero translational and angular momenta to the overall momentum of the vehicle. The considered relations have been known for some time in the case of nongyroscopic spacecraft. The present investigation is concerned with an extension of the relations to gyroscopic systems, taking into account an entirely elastic spacecraft with significant stored angular momentum. A two-dimensional free, rectangular, elastic structure with axisymmetric rotors is considered. Equations of motion are obtained with the aid of the Newton-Eulerian technique and Hamilton's principle. An analysis is conducted of the dynamics of an elastic gyroscopic free vehicle, and the dynamics of the Tisserand's frame in response to external stimuli is examined.

Hablani, H. B.↗

The LATDYN user's manual

The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided.

Housner, J. M.↗

Strong field gravitational lensing in the deformed Horava-Lifshitz black hole

Adopting the strong field limit approach, we studied the properties of strong field gravitational lensing in the deformed Horava-Lifshitz black hole and obtained the angular position and magnification of the relativistic images. Supposing that the gravitational field of the supermassive central object of the galaxy described by this metric, we estimated the numerical values of the coefficients and observables for gravitational lensing in the strong field limit. Comparing with the Reissner-Nordstroem black hole, we find that with the increase of parameter {alpha}, the angular position {theta}{sub {infinity}} decreases more slowly and r{sub m} more quickly, but angular separation s increases more rapidly. This may offer a way to distinguish a deformed Horava-Lifshitz black hole from a Reissner-Nordstroem black hole by the astronomical instruments in the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Special features of the K = 0 channel in nuclear fission

The opinion that the K = 0 fission channel is completely closed if the spin J and the parity {pi} of the nucleus undergoing fission do not satisfy the condition (-1){sup J} = {pi} is widespread. On the basis of a detailed analysis of quantum numbers characterizing the rotational states of deformed nuclei, it is shown that this opinion is erroneous. In fact, the K = 0 channel may be partly open. Its suppression is caused by special features of fission barriers in the state being considered. It is also shown that factors that suppress the K = 0channel may exist even in states characterized by J and {pi} values such that they satisfy the condition (-1){sup J} = {pi}. More precise information about the contribution of the K = 0 channel may be obtained by measuring the hexadecapole component of the angular distribution of fragments originating from the slow-neutron-induced fission of aligned nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shaped silicon wafers obtained by hot plastic deformation: performance evaluation for future astronomical x-ray telescopes

In order to develop lightweight and high angular resolution x-ray mirrors, we have investigated hot plastic deformation of 4 in. silicon (111) wafers. A sample wafer was deformed using hemispherical dies with a curvature radius of 1000 mm. The measured radius of the deformed wafer was 1030 mm, suggesting that further conditioning is indispensable for better shaping. For the first time to our knowledge, x-ray reflection on a deformed wafer was detected at Al K{alpha} 1.49 keV. An estimated surface roughness of <1 nm from the x-ray reflection profile was comparable to that of a bare silicon wafer without deformation. Hence, no significant degradation of the microroughness was seen.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Angular momentum decomposition of Richardson's pairs

The angular momentum decomposition of pairs obtained using Richardson's exact solution of the pairing Hamiltonian for the deformed {sup 174}Yb nucleus are displayed. The probabilities for low angular momenta of the collective pairs are strikingly different from the ones obtained in the BCS ground state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Angular momentum of fission fragments from microscopic theory

During nuclear fission, a heavy nucleus splits into two rotating fragments. The associated angular momentum is large, yet the mechanism of its generation and its dependence on the mass of fragments remain poorly understood. In this Letter, we provide the first microscopic calculations of angular-momentum distributions in fission fragments for a wide range of fragment masses. For the benchmark case of 239 Pu(n th ,f), we find that the angular momentum of the fragments is largely determined by the nuclear shell structure and deformation, and that the heavy fragments therefore typically carry less angular momentum than their light partners. We use the fission model freya to simulate the emission of neutrons and photons from the fragments. The dependence of the angular momenta on fragment mass after the emission of neutrons and statistical photons is linear for the heavy fragments and either constant or weakly linear for the light fragments, consistent with the universal sawtooth pattern suggested by recent experimental data. Finally, we observe that using microscopic angular-momentum distributions modifies the number of emitted photons significantly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spectroscopy of {sup 230}Th in the (p,t) reaction

The excitation spectra in the deformed nucleus {sup 230}Th were studied by means of the (p,t) reaction, using the Q3D spectrograph facility at the Munich Tandem accelerator. The angular distributions of tritons are measured for about 200 excitations seen in the triton spectra up to 3.3 MeV. Firm 0{sup +} assignments are made for 16 excited states by comparison of experimental angular distributions with the calculated ones using the CHUCK code. Additional assignments are possible, with assignments for four states relatively firm and another four tentative. Assignments up to spin 6{sup +} are made for other states. Sequences of the states are selected that can be treated as rotational bands and as multiplets of excitations. Experimental data are compared with interacting boson model (IBM) and quasiparticle-phonon model (QPM) calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sliding control of pointing and tracking with operator spline estimation

It is shown how a variable structure control technique could be implemented to achieve precise pointing and good tracking of a deformable structure subject to fast slewing maneuvers. The correction torque that has to be applied to the structure is based on estimates of upper bounds on the model errors. For a rapid rotation of the deformable structure, the elastic response can be modeled by oscillators driven by angular acceleration, and where stiffness and damping coefficients are also angular velocity and acceleration dependent. By transforming this slew-driven elastic dynamics into bilinear form (be regarding the vector made up of the angular velocity, squared angular velocity and angular acceleration components, which appear in the coefficients as the input to the deformation dynamics), an operator spline can be constructed, that gives a low order estimate of the induced disturbance. Moreover, a worst case error bound between the estimated deformation and the unknown exact deformation is also generated, which can be used where required in the sliding control correction.

Dwyer, Thomas A. W., III↗

Effect of equal channel angular pressing on the mechanical and tribological behavior of Al-Zn-Mg-Cu alloy

Highlights: • The correlation of microstructure, mechanical and wear properties has been studied. • The correlation between tensile properties and shear properties has been also studied. • Mechanical and tribological properties have been improved through the ECAP process of the Al-7075 alloy. • The dominant wear mechanisms in the initial material were adhesive and oxidative wear as well as delamination. • Abrasive and oxidative wear were the dominant wear mechanisms in ECAP processed specimens. - Abstract: Microstructure, mechanical properties and wear behavior of severely deformed Al-7075 alloy by equal channel angular pressing (ECAP) were studied. Microhardness, tensile and shear strength tests were performed to evaluate the mechanical properties of the material. The relationship between tensile and shear strength was also extracted. In addition, with the aim of study the wear behavior, the wear tests were performed by using a pin-on-disk machine under different normal loads. The microscopic observations i.e. transmission electron microscopy (TEM) and scanning electron microscope (SEM), were used to analyze the microstructure of specimens as well as the surface, subsurface and debris of worn specimens. Mechanical properties results showed that the hardness and strength (tensile and shear) of the ECAP-processed alloy were higher than that of the annealed alloy and increased with the increment of pass number. The wear test data revealed that the wear rate and friction coefficient decreased with increasing ECAP passes. The SEM analysis of worn specimens demonstrated that the dominant wear mechanisms of the annealed alloy were adhesion wear and delamination and the dominant wear mechanisms of ECAP processed alloy were abrasive wear and plowing bands. Oxidative wear was also observed at both annealed and ECAPed alloy. Totally, these results demonstrated that ultrafine-grained structure fabricated by ECAP, improves the wear resistance of the Al-7075 alloy.

36 MATERIALS SCIENCE↗

Nonequilibrium dynamics of vortex arrest in a finite-temperature Bose-Einstein condensate

We perform finite-temperature dynamical simulations of the arrest of a rotating Bose-Einstein condensate by a fixed trap anisotropy, using a Hamiltonian classical-field method. We consider a quasi-two-dimensional condensate containing a single vortex in equilibrium with a rotating thermal cloud. Introducing an elliptical deformation of the trapping potential leads to the loss of angular momentum from the system. We identify the condensate and the complementary thermal component of the nonequilibrium field and compare the evolution of their angular momenta and angular velocities. By varying the trap anisotropy we alter the relative efficiencies of the vortex-cloud and cloud-trap coupling. For strong trap anisotropies the angular momentum of the thermal cloud may be entirely depleted before the vortex begins to decay. For weak trap anisotropies, the thermal cloud exhibits a long-lived steady state in which it rotates at an intermediate angular velocity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enabling High-Contrast Imaging of Binary Stars With the Roman Space Telescope Coronagraph Instrument

A large fraction of Sun-like stars is contained in binary systems, in fact within 10 pc there are 67 FGK stars, out of which 42 belong to a multi-star system, and 28 have companion leak that is greater than 1e-9 contrast, assuming typical Hubble-quality space optics. Currently, those binary stars are not included in the Roman Space Telescope Coronagraph Instrument target list, but they could be observed if high-contrast imaging around binary star systems using Roman was possible. The Multi-Star Wavefront Control (MSWC) algorithm can be used to suppress companion star leakage. If the targets have angular separations larger than the Nyquist controllable region of the Deformable Mirror, MSWC must operate in its Super-Nyquist (SN) mode. This mode requires a target star replica within the SN region in order to provide the ability to null speckles at SN angular separations. For the case of Roman, more than half of the targets that can be observed using MSWC, including Alpha Centauri, have angular separations larger than the Nyquist controllable region of the 48x48 actuator Deformable Mirror (DM) to be used. In this paper, we describe how super-Nyquist MSWC can be implemented in Roman CGI adding a mild grating on a replica of the Wide-field Shaped Pupil mask, which would use a spare space in the Shaped Pupil Active Mechanism. We present the feasibility analysis, simulation results, and discuss the latest results on MSWC experiment from three different laboratories at NASA Ames, the Jet Propulsion Laboratory, and the Subaru telescope.

Prada, Camilo Mejia↗

Shape of {sup 44}Ar: Onset of deformation in neutron-rich nuclei near {sup 48}Ca

The development of deformation and shape coexistence in the vicinity of doubly magic {sup 48}Ca, related to the weakening of the N=28 shell closure, was addressed in a low-energy Coulomb excitation experiment using a radioactive {sup 44}Ar beam from the SPIRAL facility at GANIL. The 2{sub 1}{sup +} and 2{sub 2}{sup +} states in {sup 44}Ar were excited on {sup 208}Pb and {sup 109}Ag targets at two different beam energies. B(E2) values between all observed states and the spectroscopic quadrupole moment of the 2{sub 1}{sup +} state were extracted from the differential Coulomb excitation cross sections, indicating a prolate shape of the {sup 44}Ar nucleus and giving evidence of an onset of deformation already two protons and two neutrons away from doubly magic {sup 48}Ca. New Hartree-Fock-Bogoliubov based configuration mixing calculations have been performed with the Gogny D1S interaction for {sup 44}Ar and neighboring nuclei using two different approaches: the angular momentum projected generator coordinate method considering axial quadrupole deformations and a five-dimensional approach including the triaxial degree of freedom. The experimental values and new calculations are furthermore compared to shell-model calculations and to relativistic mean-field calculations. The new results give insight into the weakening of the N=28 shell closure and the development of deformation in this neutron-rich region of the nuclear chart.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗