Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water Demands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Assessing the complex influences of water management on hydrological drought characteristics in Texas

The state of Texas in the United States is highly susceptible to drought. Its major rivers are subject to extensive water management (WM) activities in order to sustain multisectoral water demands, particularly during drought conditions. However, the impact of WM on the propagation dynamics and characteristics of hydrological drought (HD) in Texas remains unclear. To fill this gap, this study quantifies the influence of WM across 32 streamflow gauges along the mainstems of seven major rivers in Texas by comparing a variety of drought metrics under natural and managed conditions. Notably, we leveraged an extensive, naturalized streamflow dataset constructed by the Texas Commission on Environmental Quality, paired with gauge observations of managed conditions. Results indicate that at the multi-decadal scale, WM significantly reduced HD frequency across all seven rivers and at 81% of the gauges analyzed. Additionally, it increased the response timescale of HD across Texas’ major rivers by a median of 2.5 months. Conversely, the average-event duration and severity increased in most locations. Temporal analysis reveals that the WM impact on HD varied seasonally, with attenuation effects during mid-summer and early fall and intensification effects during late winter and spring. Additionally, WM was found to greatly increase the spatial variability of HD characteristics across the region. These findings emphasize the complexity of WM effects on HD and the necessity for nuanced strategies in managing HD under WM influences.

54 ENVIRONMENTAL SCIENCES↗

Response of graywater recycling systems based on hydroponic plant growth to three classes of surfactants

Anionic (sodium laureth sulfate, SLES), amphoteric (cocamidopropyl betaine, CAPB) and nonionic (alcohol polyethoxylate, AE) surfactants were added to separate nutrient film technique (NFT) hydroponic systems containing dwarf wheat (Triticum aestivum cv. USU Apogee) in a series of 21 day trials. Surfactant was added either in a (1). temporally dynamic mode (1-3 g surfactant m(-2) growing area d(-1)) as effected by automatic addition of a 300 ppm surfactant solution to meet plant water demand, or (2). continuous mode (2 g surfactant m(-2) growing area d(-1)) as effected by slow addition (10 mLh(-1)) of a 2000 ppm surfactant solution beginning at 4d after planting. SLES showed rapid primary degradation in both experiments, with no accumulation 24 h after initial addition. CAPB and AE were degraded less rapidly, with 30-50% remaining 24 h after initial addition, but CAPB and AE levels were below detection limit for the remainder of the study. No reductions in vegetative growth of wheat were observed in response to SLES, but biomass was reduced 20-25% with CAPB and AE. Microbial communities associated with both the plant roots and wetted hardware surfaces actively degraded the surfactants, as determined by monitoring surfactant levels following pulse additions at day 20 (with plants) and day 21 (after plant removal). In order to test whether the biofilm communities could ameliorate phytotoxicity by providing a microbial community acclimated for CAPB and AE decay, the continuous exposure systems were planted with wheat seeds after crop removal at day 21. Acclimation resulted in faster primary degradation (>90% within 24h) and reduced phytotoxicity. Overall, the studies indicate that relatively small areas (3-5m(2)) of hydroponic plant systems can process per capita production of mixed surfactants (5-10 g x person(-1)d(-1)) with minimal effects on plant growth.

Hydroponics↗

E3SM‐GCAM: A Synchronously Coupled Human Component in the E3SM Earth System Model Enables Novel Human‐Earth Feedback Research

Abstract Modeling human‐environment feedbacks is critical for assessing the effectiveness of climate change mitigation and adaptation strategies under a changing climate. The Energy Exascale Earth System Model (E3SM) now includes a human component, with the Global Change Analysis Model (GCAM) at its core, that is synchronously coupled with the land and atmosphere components through the E3SM coupling software. Terrestrial productivity is passed from E3SM to GCAM to make climate‐responsive land use and CO 2 emission projections for the next 5‐year period, which are interpolated and passed to E3SM annually. Key variables affected by the incorporation of these feedbacks include land use/cover change, crop prices, terrestrial carbon, local surface temperature, and climate extremes. Regional differences are more pronounced than global differences because the effects are driven primarily by differences in land use. This novel system enables a new type of scenario development and provides a powerful modeling framework that facilitates the addition of other feedbacks between these models. This system has the potential to explore how human responses to climate change impacts in a variety of sectors, including heating/cooling energy demand, water management, and energy production, may alter emissions trajectories and Earth system changes. Plain Language Summary Earth system models help us understand how humans are changing the climate. Currently, these models do not include human systems, so predetermined greenhouse gas, aerosol, and land use change data are input to these models. These data do not reflect human responses to changes projected by Earth system models. We have added a human component to an Earth system model to represent human responses to environmental change and calculate corresponding greenhouse gas and land use change data instead of using predetermined data. Including this human component changes projections of land use, land carbon storage, and regional climate. Key Points We have incorporated a novel, advanceable human component in an Earth system model to simulate human‐Earth feedbacks Including terrestrial productivity feedbacks from the Earth to the human systems affects land change, crop prices, carbon, and climate Regional effects of including terrestrial productivity feedbacks are greater than global effects because land change is the main driver

E3SM↗

Climatic and Socioeconomic Drivers of Water Use and Their Spatio‐Temporal Patterns for Small and Mid‐Sized Cities in the Contiguous United States

This study explores the drivers of urban water use and their spatial-temporal patterns in 142 small and mid-sized cities across the Contiguous United States (CONUS) by analyzing the data directly collected from these cities and using advanced machine learning techniques. We identify five distinguished clusters across CONUS, each showing unique trends of the impact of drivers on water use. We find that socioeconomic factors significantly influence water use in eastern and southwestern cities, while climatic variables such as precipitation and temperature range dominate in central and northwestern regions. Temporal analysis reveals the impacts of major socioeconomic and climatic disruptions on urban water use in the period 2011–2021, including the COVID lockdown, the rapid growth of data centers, and the drought of 2012. In addition, our analysis suggests that economic growth in small and mid-sized US cities continues to be accompanied by rising water use, contrasting with the opposite trend observed in large cities in prior studies. This implies that as smaller cities develop, their water use may increase above current levels until incomes reach a higher threshold, highlighting the need to improve water use efficiency. This study also presents useful insights for developing effective water demand management strategies in response to climatic variability and socioeconomic growth in small and mid-sized cities.

54 ENVIRONMENTAL SCIENCES↗

Interdependent Water And Power Infrastructure Model

The approach used is the Multi-Agent System (MAS) paradigms, where systems components are represented as agents, interacting both with each other, and with the environment in which they evolved. Agents behaviors correspond to components in the real Integrated Water-Power System. The model simulate actions and interactions of these (autonomous) agents to analyze their effects on the overall system. Agents in the water system capture components of water collection, treatment, transportation, distribution and use (e.g. pipe, canal, pump, water demands for agriculture, etc.). Agents in the power system capture components of power generation, transportation, distribution and use (electricity demands, sources, etc.).

Toba, Danho Ange Lionel [Idaho National Laboratory↗

Solar hot water system installed at Anderson, South Carolina

A description is given of the solar energy hot water system installed in the Days Inns of America, Inc., at Anderson, South Carolina. The building is a low-rise, two-story 114-room motel. The solar system was designed to provide 40 percent of the total hot water demand. The collector is a flat plate, liquid with an area of 750 square feet. Operation of this system was begun in November 1977, and has performed flawlessly for one year.

Source record↗

Motel solar-hot-water system with nonpressurized storage--Jacksonville, Florida

Modular roof-mounted copper-plated arrays collect solar energy; heated water drains from them into 1,000 gallon nonpressurized storage tank which supplies energy to existing pressurized motel hot water lines. System provides 65 percent of hot water demand. Report described systems parts and operation, maintenance, and performance and provides warranty information.

Source record↗

Motel solar hot-water installation--Atlanta, Georgia

Analysis of hardness of local water, average insolation for site, and daily hot water requirements insures suitability of solar-energy system design. Report describes two units which are designed to supply 81 percent of motel's annual hot water demand based on hypothetical 85 percent occupancy. Report includes drawings, operating and maintenance instructions, and test results for 1 day of operation.

Source record↗

Solar energy system performance evaluation. Seasonal report for Colt Pueblo, Pueblo, Colorado

The Colt-Pueblo solar energy system, designed to provide space heating and hot water preheating, is described and its operational performance for a 12 month period from February 1979 through January 1980 is evaluated. The space heating subsystem met 31 percent of the measured space heating load which was close to the expected 34 percent solar fraction. Although the hot water solar fraction was 79 percent, the overall energy saving capability was reduced because of the low hot water demand. The measured heating subsystem performance would have improved considerably if the uncontrolled losses primarily from transport piping could have been reduced to an inconsequential level. Fossil energy savings of 70.31 million BTUs are estimated.

Source record↗

Solar energy system performance evaluation report for IBM System 4 at Clinton, Mississippi

The IBM System 4 Solar Energy System is described and evaluated. The system was designed to provide 35 percent of the space heating and 63 percent of the domestic hot water preheating for a single family residence located within the United States. The system consists of 259 square feet of flat plate air collectors, a rock thermal storage containing 5 1/2 ton of rock, heat exchangers, blowers, a 52 gallon preheat tank, controls, and associated plumbing. In general, the performance of the system did not meet design expectations, since the overall design solar fraction was 48 percent and the measured value was 32 percent. Although the measured space heating solar fraction at 32 percent did agree favorably with the design space heating solar fraction at 35 percent, the hot water measured solar fraction at 33 percent did not agree favorably with the design hot water solar fraction of 63 percent. In particular collector array air leakage, dust covered collectors, abnormal hot water demand, and the preheat tank by pass valve problem are main reasons for the lower performance.

Source record↗

Solar energy system performance evaluation. Seasonal report for Wormser, Columbia, South Carolina

The Wormser Solar Energy System's operational performance from April 1979 through March 1980 was evaluated. The space heating subsystem met 42 percent of the measured space heating load and the hot water subsystem met 23 percent of the measured hot water demand. Net electrical energy savings were 4.36 million Btu's or 1277 kwh. Fossil energy savings will increase considerably if the uncontrolled solar energy input to the building is considered.

Source record↗

Ecological optimality in water-limited natural soil-vegetation systems. I - Theory and hypothesis

The solution space of an approximate statistical-dynamic model of the average annual water balance is explored with respect to the hydrologic parameters of both soil and vegetation. Within the accuracy of this model it is shown that water-limited natural vegetation systems are in stable equilibrium with their climatic and pedologic environments when the canopy density and species act to minimize average water demand stress. Theory shows a climatic limit to this equilibrium above which it is hypothesized that ecological pressure is toward maximization of biomass productivity. It is further hypothesized that natural soil-vegetation systems will develop gradually and synergistically, through vegetation-induced changes in soil structure, toward a set of hydraulic soil properties for which the minimum stress canopy density of a given species is maximum in a given climate. Using these hypotheses, only the soil effective porosity need be known to determine the optimum soil and vegetation parameters in a given climate.

Eagleson, P. S.↗

Twentieth Century Redistribution in Climatic Drivers of Global Tree Growth

Energy and water limitations of tree growth remain insufficiently understood at large spatiotemporal scales, hindering model representation of interannual or longer-term ecosystem processes. By assessing and statistically scaling the climatic drivers from 2710 tree-ring sites, we identified the boreal and temperate land areas where tree growth during 1930–1960 CE responded positively to temperature (20.8 ± 3.7 Mio km2; 25.9 ± 4.6%), precipitation (77.5 ± 3.3 Mio km2; 96.4 ± 4.1%), and other parameters. The spatial manifestation of this climate response is determined by latitudinal and altitudinal temperature gradients, indicating that warming leads to geographic shifts in growth limitations. We observed a significant (P < 0.001) decrease in temperature response at cold-dry sites between 1930–1960 and 1960–1990 CE, and the total temperature-limited area shrunk by −8.7 ± 0.6 Mio km2. Simultaneously, trees became more limited by atmospheric water demand almost worldwide. These changes occurred under mild warming, and we expect that continued climate change will trigger a major redistribution in growth responses to climate.

Babst, Flurin↗

The Past and Future Changes in Climate of the Rice-Wheat Cropping Zone in Punjab, Pakistan

Agriculture is ranked top among Pakistan economic sectors vulnerable to the potential impacts of climate change. The agricultural production system is directly affected by weather inputs (temperature, solar radiation, and rainfall) that are projected to change in future (following increases in carbon dioxide and other greenhouse gasses). Although Climatic extremes such as drought, floods and heat waves, are expected to increase with detrimental consequences for agriculture and livestock production, yet changes in mean climates also pose challenges to sustainable development. This study presents climate change results for five districts within the major rice-wheat productivity zone of Punjab province in Pakistan. The results are focused on RCP8.5 mid-century (2040-2069) scenarios derived from five global climate models (GCMs) output and the Kharif (June-October) and Rabi (November-April) seasons. Analysis of recent historical weather data of Sialkot and Sheikhupura districts shows an increase in minimum temperatures and maximum temperatures and a large variation in rainfall. This temperature change and variability in rainfall are expected to enhance further as we approach 2050s. The mean maximum temperature is projected to increase by 2-2.5 ºC during the rice growing (Kharif) season and 2.4-2.7ºC during the wheat growing (Rabi) season. Rainfall during the rice growing season is more uncertain, with projections indicating an increase of 25%-35 % in the study region, while a minimal change is expected during the Rabi season. Climax of the rice growing season corresponds with the projected increase in monsoon intensity, leaving no doubt about the crop water demand satisfaction. However, a simultaneous increase in the day and night temperature may affect the growth and development of some critical phenological stages and thus could impact final yield.

Climate Change↗

Improving Flood and Drought Management in Agricultural River Basins: An Application to the Mun River Basin in Thailand

Agriculture productivity is regularly affected by floods and droughts, and the severity is likely to increase in the future. Even if significant efforts are spent on water development projects, ineffective project planning often means that they continue to occur or are only partly mitigated, for example, in the Mun River Basin, Thailand, where 1000s of water projects have been implemented. Despite this, the basin regularly experiences floods and droughts. In this study, an analysis of the adverse impacts of basin-scale floods and droughts on rice cultivation in the Mun River Basin is conducted, and an estimation of the coping capacity of existing measures. The results demonstrate that while the total storage capacity of in-situ and ongoing projects would be sufficient to tackle both hazards, it can only be achieved if the projects are effectively utilised. Based on this, proposed solutions for the region include small farm ponds, a subsurface floodwater harvesting system, and oxbow lake reconnections. The suggested measures are practicable, economical, environmentally low-impact, and their implementation (if executed with appropriate care) would reduce flood and drought problems in the basin. Notably, the measures and calculation methods proposed for this basin can also be applied to other crops and regions.

Farm pond↗

Western Tennessee Water Resources: Leveraging High Resolution Remotely Sensed Data to Assess Water Availability and Vulnerability in the Memphis Aquifer Area in West Tennessee

The Memphis Aquifer (MA) is located in the Mississippi Embayment that extends 250,000 square kilometers across eight states. Fayette and Haywood counties in West Tennessee are situated within the recharge zone of the MA and include the forthcoming Ford “mega campus” named Blue Oval City (BOC), which will consist of a vehicle-production facility and battery assembly division. Increased water demand and land cover change resulting from urban development, such as BOC in the MA’s narrow recharge zone, threaten the aquifer’s groundwater storage and recharge rate. Groundwater recharge factors that influence the narrow recharge zone of the MA include precipitation, evapotranspiration, runoff, and land cover type. In partnership with Protect Our Aquifer (POA) and the Center for Applied Earth Science and Engineering Research (CAESAR) at the University of Memphis, the team used data from the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS), Integrated Multi-Satellite Retrievals for Global Precipitation Measurement (GPM IMERG), and Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS). The team also used ancillary data from the National Land Cover Database (NLCD) and the North American Land Data Assimilation System (NLDAS) Noah Land Surface Model. These results identified “thriving” recharge locations, which are areas most conducive to aquifer recharge in Fayette County. The partners may use the results to prioritize specific areas in need of protection before they become susceptible to the effects of urbanization and industrialization.

precipitation↗

Plant Watering in Low Gravity: The Study of the Fluid Dynamic Characteristics of Lunar Regolith Simulant for the Application of Crop Production Systems Using Scaled Capillary Devices

Bioregenerative life support is key to sustaining human life on the surface of other celestial bodies for missions beyond Low Earth Orbit (LEO). One example of such life support includes crop production systems capable of producing both plants and fungi for astronaut consumption. There have been numerous efforts to design and deploy such systems; however, there have been persistent fundamental issues with the water delivery systems. This study aims to understand and model the fluid dynamics of crop production systems to inform engineers about the key parameters needed for the design of such systems. The primary objective is to validate and expand upon NASA’s previous study, the Plant Water Management (PWM) experiments, to understand the fluid phenomena present in substrate-based systems. The model will then be expanded to include parameters for changing the test material of potential growth media as well as the varying water demands of the crop throughout its different stages in its life cycle. Specifically, this study is focused on the viability of using lunar regolith for agricultural purposes. Terrestrial-based scaled capillary models will be utilized to mimic the fluid phenomena occurring due to the low gravity environment seen on the lunar surface. Ultimately, the study will model the fluid flow present in the lunar regolith simulant and inform researchers on how to incorporate the material into crop production systems on the lunar surface.

gravity↗