Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAXS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The MJS-77 magnetometer actuator

A two-position (0 deg and 180 deg) actuating mechanism (flipper) driven by alternately-heated wax motors (pellets) used to rotate the low field triaxial fluxgate magnetometer experiment on the 1977 Mariner Jupiter-Saturn spacecraft to its 0 deg and 180 deg positions is described. The magnetic field, power requirements, weight and volume of this device are discussed. The problems encountered in design and development of this mechanism are presented.

Stange, W. C.↗
NASA NTRS1978

Thermal and other tests of photovoltaic modules performed in natural sunlight

The bulk of the testing was the characterization of twenty-nine modules according to their nominal operating cell temperature (NOCT) and the effect on NOCT of changes in module design, various residential roof mounting configurations, and dirt accumulation. Other tests, often performed parallel with the NOCT measurements, evaluated the improvement in electrical performance by cooling the modules with water and by channeling the waste heat into a phase change material (wax). Electrical degradation resulting from the natural marriage of photovoltaic and solar water heating modules was also demonstrated. Cost effectiveness of each of these techniques are evaluated in light of the LSA cost goal of $0.50 per watt.

Stultz, J. W.↗
NASA NTRS1977

The MJS-77 magnetometer actuator

A two-position (0 deg and 180 deg) actuating mechanism (flipper) driven by alternately-heated wax motors (pellets) will be used to rotate the low field triaxial fluxgate magnetometer experiment on the 1977 Mariner Jupiter-Saturn spacecraft to its 0 deg and 180 deg positions. The magnetic field, power requirements, weight and volume of this device are very restrictive. The problems encountered in design and development of this mechanism are presented.

Stange, W. C.↗
NASA NTRS1979

Automated Array Assembly Task In-depth Study of Silicon Wafer Surface Texturizing

A low cost wafer surface texturizing process was studied. An investigation of low cost cleaning operations to clean residual wax and organics from the surface of silicon wafers was made. The feasibility of replacing dry nitrogen with clean dry air for drying silicon wafers was examined. The two stage texturizing process was studied for the purpose of characterizing relevant parameters in large volume applications. The effect of gettering solar cells on photovoltaic energy conversion efficiency is described.

Jones, G. T.↗
NASA NTRS1979

Thermal and other tests of photovoltaic modules performed in natural sunlight

The nominal operating cell temperature (NOCT), an effective way to characterize the thermal performance of a photovoltaic module in natural sunlight, is developed. NOCT measurements for more than twenty different modules are presented. Changes in NOCT reflect changes in module design, residential roof mounting, and dirt accumulation. Other test results show that electrical performance is improved by cooling modules with water and by use of a phase change wax. Electrical degradation resulting from the marriage of photovoltaic and solar water heating modules is demonstrated. Cost-effectiveness of each of these techniques is evaluated.

Stultz, J. W.↗
NASA NTRS1980

Forming complex cavities in clear plastic

Metal casting "lost wax" process is used to mold plastic parts. Highly economical technique produces optically-clear components of complex shapes, which can be used in complex combustion and manifold systems.

Riley, T.↗
NASA NTRS1980

Kinetics of the reaction OH + H2O2 yields HO2 + H2O

The paper describes an experimental study of the title reaction that uses the discharge-flow technique, laser-induced-fluorescence detection of OH and simultaneous monitoring of O and H atoms in the 250-459 K range. The reaction is normal and free from surface effect interference in Teflon or halocarbon wax-coated tube, but not in clean Pyrex. OH radicals are generated in three ways and at low concentrations to eliminate side reactions. The rate constants were determined at 298 K and over the 250-459 K range, with a factor of two higher at 298 K and factors of 3 to 5 higher at 10 to 30 km altitude in the terrestrial atmosphere than previous studies have indicated. The effect of the higher rate constant on atmospheric processes and on recent laboratory measurements of other reactions is also discussed.

Sridharan, U. C.↗
NASA NTRS1981

NASA gas turbine stator vane ring

Four monolithic stator vane rings from reaction-bonded silicon nitride were produced. This paper describes the various steps involved: wax injection of stator vane patterns, precise fixturing of patterns, mold fabrication, slip preparation, casting, prenitriding, nitriding, and ceramic machining. Each process step is discussed and illustrated, and tables of property measurements are included.

Gersch, H. M.↗
NASA NTRS1981

Aerosol generation and distribution system for the Third International Cloud Condensation Nuclei Workshop

In order to obtain identical samples participating CCN instruments and aerosol characterizing equipment were located along and connected to a 8.2 cm diameter aluminum tube through which the test aerosols were pumped directly from the source at very slight overpressure. Of the total of 29 experiments, 18 were carried out with artificial NaCl or (NH4)2SO4 aerosols. These were generated from salt solutions by pneumatic atomizers of special design to ensure high constancy of the aerosol output concentration. In three experiments with insoluble CCN (AgI, paraffin wax) the aerosols were generated thermally. In some of the tests, an electrostatic classifier was used for narrowing the particle size distributions.

Katz, U.↗
NASA NTRS1981

The variation of magma discharge during basaltic eruptions

The rate at which basaltic magma is discharged during many eruptions varies substantially. An individual eruption has an eruption rate, which is the volumetric rate of discharge averaged over the whole or a major part of an eruption, and an effusion rate, which is the volumetric flux rate at any given time. In many cases, the effusion rate soon reaches a maximum after a short period of waxing flow (partly because of magmatic expansion); it then falls more slowly in the later parts of the eruption. The release of elastic strain energy from stored magma and the subvolcanic reservoir during eruption can give a waning flow of this type an exponential form. A comparison of the eruption rates of eruptions of Mauna Loa, Kilauea and Etna shows that for each volcano there is a trend of decreasing effusion rate with increasing duration of eruption. It is noted that this relationship is not predicted by a simple elastic model of magma release. Two other processes are invoked to explain the eruptive histories of these volcanoes: modification of the eruptive conduits and the continued supply of magma from depth during eruption.

Wadge, G.↗
NASA NTRS1981

The variation of magma discharge during basaltic eruptions

The different types of magmatic flow in basaltic eruptions are discussed, and processes explaining the eruptive history of specific volcanoes are investigated. The effusion rate curve is divided into waxing and waning flow parts, and the ideal, elastic response of the reservoir in the waning phase is analytically shown. Historical eruption rates of Mauna Loa, Kilauea, and Etna are presented, demonstrating that for each volcano there is a trend of decreasing rate with increasing duration of eruption, a relationship not predicted by a simple elastic model of magma release. The eruptive histories of these volcanoes is explained by the processes of modification of the eruptive conduits and the continued supply of magma from depth during eruption. Discharge variations from Paricutin, Hekla, and Kilauea Iki are discussed in detail.

Wadge, G.↗
NASA NTRS1983

Electrodeposition Repair of Damaged Metal Parts

Damaged material replace by electrodeposited copper. Channel restoration consists of alternately machinging damaged material and reconstructing material by electrodeposition. Solid wax processed into coolant channels to provide plating surfaces that match original channel surfaces.

Kaufman, M.↗
NASA NTRS1984

Temporary Sealing of Cavities for Leak Testing

Wax Seals cavity openings to permit helium leak test of cavity welds. Technique facilitates leak testing of cavities in components of larger systems not otherwise sealed off at time leak testing done.

Little, J.↗
NASA NTRS1984

Polyurethane Filler for Electroplating

Polyurethane foam proves suitable as filler for slots in parts electroplated with copper or nickel. Polyurethane causes less contamination of plating bath and of cleaning and filtering tanks than wax fillers used previously. Direct cost of maintenance and indirect cost of reduced operating time during tank cleaning also reduced.

Beasley, J. L.↗
NASA NTRS1982

High temperature silicon carbide impregnated insulating fabrics

High temperature insulating articles having improved performance characteristics are described. The articles comprise fabrics of closely woven refractory or heat resistant fibers having particles of silicon carbide dispersed at least partially through the fabric and bonded to the fibers with an emulsifiable polyethylene wax. Such articles exhibit significantly increased high temperature emittance characteristics and an improved retention of integrity and flexibility after prolonged exposure to high temperature.

Schomburg, C.↗
NASA NTRS1983

Injection molding ceramics to high green densities

The injection molding behavior of a concentrated suspension of Si powder in wax was studied. It was found that the injection molding behavior was a function of the processing techniques used to generate the powder. Dry ball-milled powders had the best molding behavior, while air classified and impact-milled powders demonstrated poorer injection moldability. The relative viscosity of these molding batches was studied as a function of powder properties: distribution shape, surface area, packing density, and particle morphology. The experimental behavior, in all cases, followed existing theories. The relative viscosity of an injection molding composition composed of dry ball-milled powders could be expressed using Farris' relation.

Mangels, J. A.↗
NASA NTRS1982

Polymer coating of glass microballoons levitated in a focused acoustic field

Inertial confinement fusion (ICF) glass microballoons (GMBs) levitated in a focusing radiator acoustic device can be coated with liquid materials by deploying the liquid into the levitation field with a stepped-horn atomizer. The GMB can be forced to the center of the coating liquid with a strong acoustically generated centering force. Water solutions of organic polymers, UV-curable liquid organic monomers, and paraffin waxes have been used to prepare solid coatings on the surface of GMBs using this technique.

Young, A. T.↗
NASA NTRS1984

Injection molding of silicon carbide capable of being sintered without pressure

The most suitable SiC mass for injection molding of SiC articles (for subsequent pressureless sintering) consisted of beta SiC 84, a wax mixture 8, and polyethylene or polystyrene 8 parts. The most effective method for adding the binders was by dissolving them in a solvent and subsequent evaporation. The sequence of component addition was significant, and all parameters were optimized together rather than individually.

Muller-Zell, A.↗