Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVE REFLECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Pulsed-echo interface wave characterization of bolted plates

Ultrasonic waves which propagate along the plane boundary separating two solid substrates were used to characterize aluminum and titanium plates adhesively bonded and bolted together. Wave pulses were used to produce interface waves between the aluminum and a Ti-6Al-4V titanium alloy bar by normal mode conversion. Interface wave reflections from bolt holes drilled through the interface were reconverted to surface wave pulses and detected by the same wedge by standard pulse-echo techniques. Time of flight measurements indicate that the reflected waves are a supersonic of longitudinal modes and circularly symmetric waves that propagate around the bolt hole.

Turner, T. M.↗
NASA NTRS2001

Ultrasonic wave propagation in trabecular bone predicted by the stratified model

The objective of this study was to investigate ultrasound propagation in trabecular bone by considering the wave reflection and transmission in a multilayered medium. The use of ultrasound to identify those at risk of osteoporosis is a promising diagnostic method providing a measure of bone mineral density (BMD). A stratified model was proposed to study the effect of transmission and reflection of ultrasound wave within the trabecular architecture on the relationship between ultrasound and BMD. The results demonstrated that ultrasound velocity in trabecular bone was highly correlated with the bone apparent density (r=0.97). Moreover, a consistent pattern of the frequency dependence of ultrasound attenuation coefficient has been observed between simulation using this model and experimental measurement of trabecular bone. The normalized broadband ultrasound attenuation (nBUA) derived from the simulation results revealed that nBUA was nonlinear with respect to trabecular porosity and BMD. The curve of the relationship between nBUA and BMD was parabolic in shape, and the peak magnitude of nBUA was observed at approximately 60% of bone porosity. These results agreed with the published experimental data and demonstrated that according to the stratified model, reflection and transmission were important factors in the ultrasonic propagation through the trabecular bone.

Non-NASA Center↗
NASA NTRS1990

A mathematical model of the structure and evolution of small scale discrete auroral arcs

A three dimensional fluid model which includes the dispersive effect of electron inertia is used to study the nonlinear macroscopic plasma dynamics of small scale discrete auroral arcs within the auroral acceleration zone and ionosphere. The motion of the Alfven wave source relative to the magnetospheric and ionospheric plasma forms an oblique Alfven wave which is reflected from the topside ionosphere by the negative density gradient. The superposition of the incident and reflected wave can be described by a steady state analytical solution of the model equations with the appropriate boundary conditions. This two dimensional discrete auroral arc equilibrium provides a simple explanation of auroral acceleration associated with the parallel electric field. Three dimensional fully nonlinear numerical simulations indicate that the equilibrium arc configuration evolves three dimensionally through collisionless tearing and reconnection of the current layer. The interaction of the perturbed flow and the transverse magnetic field produces complex transverse structure that may be the origin of the folds and curls observed to be associated with small scale discrete arcs.

Seyler, C. E.↗
NASA NTRS1993

Interaction between perpendicular magnetohydrodynamic shocks

A general analysis is made of the collision and merging of perpendicular shocks as well as the interaction between a shock and a tangential discontinuity. It is found that two head-on shocks diminish both in strength after collisions and a tangential discontinuity forms between them. The property of the discontinuity depends on the relative strength of the two shocks. No discontinuity occurs if the shocks are equal in strength. The emerging of two shocks propagating in the same direction results in a strong shock followed by a tangential discontinuity and a reverse wave. The reverse wave is a rarefaction wave if one or both of the shocks are strong. If the shocks are both weak, a critical adiabatic index (CAI) exists. The reverse wave is a rarefaction wave if the wavelength is less than the CAI and a shock exists if the wavelength is greater than the CAI. As a wake shock enters from a medium of higher wave impedance into that of lower wave impedance, the reflected wave is a rarefaction wave and the total pressure ratio decreases and the velocity jump increases after the shock passes through the border.

Hu, Y. Q.↗
NASA NTRS2005

Unified Models of Turbulence and Nonlinear Wave Evolution in the Extended Solar Corona and Solar Wind

The paper discusses the following: 1. No-cost Extension. The no-cost extension is required to complete the work on the unified model codes (both hydrodynamic and kinetic Monte Carlo) as described in the initial proposal and previous annual reports. 2. Scientific Accomplishments during the Report Period. We completed a comprehensive model of Alfvtn wave reflection that spans the full distance from the photosphere to the distant heliosphere. 3. Comparison of Accomplishments with Proposed Goals. The proposal contained two specific objectives for Year 3: (1) to complete the unified model code, and (2) to apply it to various kinds of coronal holes (and polar plumes within coronal holes). Although the anticipated route toward these two final goals has changed (see accomplishments 2a and 2b above), they remain the major milestones for the extended period of performance. Accomplishments la and IC were necessary prerequisites for the derivation of "physically relevant transport and mode-coupling terms" for the unified model codes (as stated in the proposal Year 3 goals). We have fulfilled the proposed "core work" to study 4 general types of physical processes; in previous years we studied turbulence, mode coupling (Le., non-WKB reflection), and kinetic wave damping, and accomplishment lb provides the fourth topic: nonlinear steepening.

Wagner, William↗
NASA NTRS1985

Stress waves in an isotropic elastic plate excited by a circular transducer

Steady state harmonic stress waves in an isotropic elastic plate excited on one face by a circular transducer are analyzed theoretically. The transmitting transducer transforms an electrical voltage into a uniform normal stress at the top of the plate. To solve the boundary value problem, the radiation into a half-space is considered. The receiving transducer produces an electrical voltage proportional to the average spatially integrated normal stress over its face due to an incident wave. A numerical procedure is given to evaluate the frequency response at a receiving point due to a multiply reflected wave in the near field. Its stability and convergence are discussed. Parameterization plots which determine the particular wave whose frequency response has maximum magnitude compared with other multiple reflected waves are given for a range of values of dimensionless parameters. The effects of changes in the values of the parameters are discussed.

Karagulle, H.↗
NASA NTRS1986

Stress waves in isotropic elastic plate excited by circular transducer

Steady state harmonic stress waves in an isotropic elastic plate excited on one face by a circular transducer are analyzed theoretically. The transmitting transducer transforms an electrical voltage into a uniform normal stress at the top of the plate. To solve the boundary value problem,the radiation into a half-space is considered. The receiving transducer produces an electrical voltage proportional to the average spatially integrated normal stress over its face due to an incident wave. A numerical procedure is given to evaluate the frequency response at a receiving point due to a multiply reflected wave in the near field. Its stability and convergence are discussed. Parameterization plots which determine the particular wave whose frequency response has maximum magnitude compared with other multiple reflected waves are given for a range of values of dimensionless parameters. The effects of changes in the values of the parameters are discussed.

Williams, J. H., Jr.↗
NASA NTRS1990

32-GHz Wideband Maser Amplifier

High-gain, wideband, microwave amplifier based on ruby cooled by liquid helium. Features include low input equivalent noise temperature and 400-MHz bandwidth. Design basically extension of previous reflected-wave masers built for frequency range of 18 to 26 GHz. Maser amplifier includes eight stages connected in reflected-wave configuration. Particularly useful for detection of weak microwave signals in radio astronomy and communications.

Shell, J. S.↗
NASA NTRS1983

Scattering of electromagnetic waves from a half space of densely distributed dielectric scatterers

The scattering of a plane wave obliquely incident on a half space of densely distributed spherical dielectric scatterers is studied. The quasi-crystalline approximation is applied to truncate the hierarchy of multiple scattering equations, and the Percus-Yevick and the Verlet-Weis results are used to represent the pair distribution function. The coherent reflected wave is studied with these approximations. The incoherent scattered wave is calculated with the distorted Born approximation. In the low-frequency limit, closed-form expressions are obtained for the effective propagation constants, the coherent reflected wave, and the bistatic scattering coeficients. Results at higher frequencies are calculated numerically. The advantage of the present approach is that, in the low-frequency limit, it reproduces the effects of specular reflection, Fresnel reflection coefficient, Brewster angle, and Clausius-Mosotti relation. In addition to the classical results, the bistatic scattering coefficients are also calculated. The theory is also applied to match backscattering data from dry snow at microwave frequencies.

Tsang, L.↗
NASA NTRS1986

Methane oxidation behind reflected shock waves: Ignition delay times measured by pressure and flame band emission

Ignition delay data were recorded for three methane-oxygen-argon mixtures (phi = 0.5, 1.0, 2.0) for the temperature range 1500 to 1920 K. Quiet pressure trances enabled us to obtain delay times for the start of the experimental pressure rise. These times were in good agreement with those obtained from the flame band emission at 3700 A. The data correlated well with the oxygen and methane dependence of Lifshitz, but showed a much stronger temperature dependence (phi = 0.5 delta E = 51.9, phi = 1.0 delta = 58.8, phi = 2.0 delta E = 58.7 Kcal). The effect of probe location on the delay time measurement was studied. It appears that the probe located 83 mm from the reflecting surface measured delay times which may not be related to the initial temperature and pressure. It was estimated that for a probe located 7 mm from the reflecting surface, the measured delay time would be about 10 microseconds too short, and it was suggested that delay times less than 100 microsecond should not be used. The ignition period was defined as the time interval between start of the experimental pressure rise and 50 percent of the ignition pressure. This time interval was measured for three gas mixtures and found to be similar (40 to 60 micro sec) for phi = 1.0 and 0.5 but much longer (100 to 120) microsecond for phi = 2.0. It was suggested that the ignition period would be very useful to the kinetic modeler in judging the agreement between experimental and calculated delay times.

Brabbs, T. A.↗
NASA NTRS1971

Differential phase shift of partially reflected radio waves.

The addition of phase difference measurements to differential absorption experiments is shown to be both feasible and desirable. The phase information can provide a more sensitive measurement of electron density above about 75 km. The differential phase shift is only weakly dependent on collision frequency in this range, and so an accurate collision frequency profile is not a prerequisite. The differential phase shift and differential absorption measurements taken together can provide both electron density and collision frequency data from about 70 to 90 km.

Connolly, D. J.↗
NASA NTRS1954

Unsteady oblique interaction of a shock wave with a plane disturbance

Analysis is made of the flow field produced by oblique impingement of weak plane disturbances of arbitrary profile on a plane normal shock. Three types of disturbance are considered: (a) sound wave propagating in the gas at rest into which the shock moves; (b) sound wave overtaking the shock from behind,(The sound wave reflects as a sound wave, and a stationary vorticity wave is produced); (c) an incompressible vorticity wave stationary in the gas ahead of the shock. The incident wave refracts as a stationary vorticity wave, and either a sound wave or attenuating pressure wave is also produced. Computations are presented for the first two types of incident wave, over the range of incidence angles, for shock Mach numbers of 1, 1.5, and infinity.

Moore, Franklin K↗
NASA NTRS1995

A high-resolution OGCM simulation of the Tropical Pacific Ocean during the 1985-1994 TOGA period. Part I: Long equatorial waves

A high resolution oceanic general circulation model of the three topical oceans is used to investigate long equatorial wave activity in the Pacific Ocean during the 1985-1994 TOGA period. Zonal wind stress forcing and simulated dynamic height are interpreted using techniques previously applied to data. Kelvin and first Rossby waves are observed propagating during all the period. A seasonal cycle and interannual anomalies are computed for each long equatorial wave. The east Pacific basin is mainly dominated by seasonal cycle variations while strong interannual anomalies are observed west of the dateline. Long wave interannual anomalies are then compared to wave coefficients simulated by a simple wind-forced model. Our results outline the major role played by wind forcing on interannual time scales in generating long equatorial waves. However, near both eastern and western boundaries, some differences can be attributed to long wave reflections. A comparison to wave coefficients calculated from GEOSAT sea-level data gives some insight of the model behavior.

Long Equatorial Waves↗