SEARCH · Engineering Papers

Results for “Vacancy engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Engineering Thermally Resilient and Kinetically Active Reversible Protonic Ceramic Cells via Interfacial Design

Achieving concurrent fast electrode kinetics and long-term thermo-mechanical durability remains a critical challenge for reversible protonic ceramic electrochemical cells (R-PCECs). Herein, we report an interfacial engineering strategy that integrates a perovs.kite-type PrBaRu0.1Co1.9O5+δ (PBRC) nanoparticle layer onto a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ (PBSCF) substrate (PBRC-PBSCF), together with a modified pellet-assisted sintering approach to fabricate dense BaZr0.4Ce0.4Y0.1Yb0.1O3-δ (BZCYYb4411) electrolytes. The in situ reconstructed heterointerface enhances oxygen reduction/evolution reaction (ORR/OER) kinetics, promotes H2O adsorption/dissociation, and improves steam tolerance, as verified by electrochemical measurements and interfacial microstructural analyses. Density functional theory reveals that Ru-induced electronic modulation at the PBRC-PBSCF interface lowers the energy of oxygen vacancy formation and optimizes the position of the O 2p band center, thereby accelerating oxygen redox kinetics and stabilizing the interface. The resulting R-PCECs deliver an excellent peak power density of 1.112 W cm−2 and an electrolysis current density of −1.257 A cm−2 at 1.3 V in 3% H2O wet air at 600°C, with a reasonable faradaic efficiency. Furthermore, the cells demonstrate excellent stability, sustaining 100 h of thermal cycling (400–600°C, 200°C h−1) in both fuel cell and electrolysis modes, with 600 h of stability in electrolysis mode (600°C, −0.5 to −2 A cm−2).

30 DIRECT ENERGY CONVERSION↗

NASA NTRS2015

Kinetic Monte Carlo Simulation of Oxygen Diffusion in Ytterbium Disilicate

Silicon-based ceramic components for next-generation jet turbine engines offer potential weight savings, as well as higher operating temperatures, both of which lead to increased efficiency and lower fuel costs. Silicon carbide (SiC), in particular, offers low density, good strength at high temperatures, and good oxidation resistance in dry air. However, reaction of SiC with high-temperature water vapor, as found in the hot section of jet turbine engines in operation, can cause rapid surface recession, which limits the lifetime of such components. Environmental Barrier Coatings (EBCs) are therefore needed if long component lifetime is to be achieved. Rare earth silicates such as Yb2Si2O7 and Yb2SiO5 have been proposed for such applications; in an effort to better understand diffusion in such materials, we have performed kinetic Monte Carlo (kMC) simulations of oxygen diffusion in Ytterbium disilicate, Yb2- Si2O7. The diffusive process is assumed to take place via the thermally activated hopping of oxygen atoms among oxygen vacancy sites or among interstitial sites. Migration barrier energies are computed using density functional theory (DFT).

Computer Simulation↗

DOE OSTI2026

Enhancing mobility and interface state engineering via UV-ozone treatment in BEOL-compatible ultrathin TiO 2 transistors

It has emerged as a potential candidate to improve the performance of monolithic-three-dimensional (M3D) integration of fused logic and memories through low-temperature in situ synthesis of high-performance metal–oxide–semiconductor (MOS) transistors. Here, we report the demonstration of the BEOL-compatible low thermal budget (350 °C) fabrication process of ultrathin-TiO2 transistors by the combination of RTA and UV-ozone treatment (RTA-UVOz). UV–ozone (UVOz) treatment of TiO2 anatase films significantly enhances stability, boosting ION current and field effect mobility (μ FE ) by two times of magnitude in TiO2 TFTs. UV ozone treatment helps to eliminate pre-existing oxygen vacancies and carbon contamination on TiO2 channels even at low temperature (100 °C), resulting in high-quality channel/dielectric interfaces with low interface states (D it ). During UVOz treatment, oxygen species (O x ) passivate the oxygen vacancies ($V$$^{2+}_{o}$), and hence low concentration of $V$$^{2+}_{o}$ would be left for ionization/de-ionization under PBS/NBS, leading to improved bias stress stability. Furthermore, the TiO 2 TFTs with thin ZrO 2 gate dielectric exhibited excellent performance including a lower subthreshold swing (SS) of 98 mV/dec with high drive I ON current ∼ 4.5 μA/μm, a high I ON /I OFF > 10 9 , and mobility μFE of 7 cm 2 /V-s under a battery powered voltage of 1 V. UV–ozone treatment enables high-performance, CMOS-compatible TiO 2 transistors with a low thermal budget, ideal for next-generation flexible, energy-efficient electronics.

BEOL↗

DOE OSTI2024

Functionalization of Monolayer MoS 2 with Layered Multimolecular Architectures

Two dimensional van der Waals materials have attracted attention due to their unique properties that arise in the monolayer versus bulk limits. Monolayer MoS 2 has been at the forefront of 2D materials due to its broad applicability in catalysis, photovoltaics, and spintronics. To realize the capabilities of MoS 2 enabled technology, it is necessary to engineer interfaces where charge carriers can be funneled toward or away from the surface. Molecular systems are a versatile strategy to enable this. Ion-linked molecular architectures have been used previously to circumvent difficult and taxing synthetic methods. Here, we demonstrate the growth of metal ion-linked bilayers (ILBs) on monolayer MoS 2 consisting of a first layer spacer (4-mercaptobenzoic acid, MBA) with a Zn(II) ion linked to a fluorophore (BODIPY). Using a combination of Atomic Force Microscopy and Raman spectroscopy, we resolved intrinsic S-vacancies in the MoS 2 lattice via S–H bond breaking of MBA. X-ray Photoelectron Spectroscopy confirmed that Zn(II) acetate can coordinate to carboxylate groups on MBA. Furthermore, with photoluminescence microscopy, we determined that BODIPY emission is observable only in the presence of a metal ion, confirming the growth of a multimolecular ion-linked supramolecular assembly on MoS 2 .

36 MATERIALS SCIENCE↗

DOE OSTI2025

In situ atomic-resolution imaging of water vapor–driven multistep oxidation dynamics in strontium cobaltite

Understanding how water vapor interacts with transition metal oxides (TMOs) is critical for tailoring material properties to improve performance and enable new technologies. Despite extensive research efforts, atomic-scale mechanisms underpinning dynamic reactions and reaction-induced phase transitions remain elusive. Here, we use in situ environmental transmission electron microscopy to investigate how water vapor oxidizes vacancy-ordered SrCoO 2.5 at moderately elevated temperatures, demonstrating that water molecules can initiate oxidation more effectively than oxygen under comparable conditions. We discover a distinct “staging” behavior during the oxidation process: A fully ordered intermediate phase, SrCoO 2.75 , forms before transitioning into a near-perovskite SrCoO 3−δ . In addition, antiphase boundaries, originating at step terraces of SrTiO 3 , alleviate strain by creating reversible nanoscale “gaps” during lattice contraction under oxidation, providing a pathway for preserving structural integrity throughout redox cycling. This work provides atomic-level guidance for engineering TMOs by leveraging water vapor to control their redox behavior and tailor functional properties.

Science & Technology - Other Topics↗

NASA NTRS2017

Kinetic Monte Carlo Simulations of Oxygen Diffusion in Environmental Barrier Coating Materials

Good, Brian S.↗

NASA NTRS2017

Kinetic Monte Carlo Simulations of Oxygen Diffusion in Environmental Barrier Coating Materials

Ceramic Matrix Composite (CMC) materials are of interest for use in next-generation turbine engine components, offering a number of significant advantages, including reduced weight and high operating temperatures. However, in the hot environment in which such components operate, the presence of water vapor can lead to corrosion and recession, limiting the useful life of the components. Such degradation can be reduced through the use of Environmental Barrier Coatings (EBCs) that limit the amount of oxygen and water vapor reaching the component. Candidate EBC materials include Yttrium and Ytterbium silicates. In this work we present results of kinetic Monte Carlo (kMC) simulations of oxygen diffusion, via the vacancy mechanism, in Yttrium and Ytterbium disilicates, along with a brief discussion of interstitial diffusion. An EBC system typically includes a bond coat located between the EBC and the component surface. Bond coat materials are generally chosen for properties other than low oxygen diffusivity, but low oxygen diffusivity is nevertheless a desirable characteristic, as the bond coat could provide some additional component protection, particularly in the case where cracks in the coating system provide a direct path from the environment to the bond coat interface. We have therefore performed similar kMC simulations of oxygen diffusion in this material.

Good, Brian S.↗

DOE OSTI2025

An integrated photonic engine for programmable atomic control

Abstract Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.

Science & Technology - Other Topics↗

DOE OSTI2024

Characterizations of two-photon absorption process induced by defects in aluminum nitride using Z-scan method

Abstract In this work, we reported two-photon absorption (TPA) measurements for aluminum vacancies in Aluminum nitride single crystals. We measured the linear transmission and identified the defect levels. Using the Z-scan method, we measured the TPA coefficients of the transitions between defect levels from 380 nm to 735 nm. The transition occurs between the aluminum vacancies defect levels. Furthermore, the power dependence shows good linear fitting, confirming the TPA mechanism. These results will be helpful for the design and fabrication of ultra-low loss waveguides and integrated photonics in the ultraviolet spectral range.

Engineering↗

DOE OSTI2026

Revealing the Defect‐Driven Ferroelectric Mechanisms of Aluminum Nitride

Wurtzite III-nitride compounds are CMOS-compatible with widespread industrial interest to exercise ferroelectricity, despite their polar structure being highly resistant to polarization reversal. Here, we induce and tune ferroelectric properties in w-AlN via direct-write ion-beam processing, using nanoscale patterned defect engineering as a post-growth alternative to conventional cation substitution. Nanometric piezoresponse spectroscopy of the focused He + beam patterned defect concentrations in ferroelectric Al 0.92 B 0.08 N measures a localized 10x enhancement in effective piezoresponse and 40% reduction in switching barrier. The irradiation-induced point defects convert piezoelectric AlN into a ferroelectric system with site-saturated nucleation and raise the dielectric susceptibility, switched polarization, and effective piezoelectric coefficient. Enhanced defect-lattice interactions in AlN increase carrier conduction and phonon scattering loss but preserve long-range crystallinity. Here, based on atomistic analysis of nudged elastic band density functional theory calculations and reactive force field simulations, both nitrogen vacancies and defect complexes disrupt bond ordering, facilitating a line-by-line low-barrier switching of pristine AlN.

36 MATERIALS SCIENCE↗

DOE OSTI2025

First-principles elucidation of defect-mediated Li transport in hexagonal boron nitride

Hexagonal boron nitride (hBN) is a promising candidate as a protective membrane or separator in Li-ion and Li–S batteries, given its excellent chemical stability, mechanical robustness, and high thermal conductivity. In addition, hBN can be functionalized by introducing defects and dopants, or be directly integrated into other active components of batteries, which further augments its appeal to the field. Here, we use first-principles simulations to evaluate the role of atomic defects in hBN in regulating the Li-ion diffusion mechanism and associated kinetics. Specifically, the following four distinct types of vacancy defects are considered: isolated single B and N vacancies, a B–N vacancy pair, and a B 3 N vacancy cluster. It is found that these defect sites generally favor Li intercalation and out-of-plane diffusion but slow down in-plane Li-ion diffusion due to a strong Li trapping effect at the defect sites. Such a trapping effect is, however, highly local such that it does not necessarily affect the overall Li-ion conductivity in defected hBN layers. The present systematic evaluation of the impact of atomic defects on Li ion migration and accompanied charge analysis of hBN lattice in response to Li-ion diffusion provide a mechanistic understanding of Li-ion transport behavior in defected hBN and highlight the potential of defect engineering to achieve optimal material performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Self‐Trapped Hole Migration and Defect‐Mediated Thermal Quenching of Luminescence in α‐ and β‐Ga 2 O 3

Gallium oxide (Ga 2 O 3 ) is a promising ultrawide bandgap semiconductor for next-generation power electronics and optoelectronic devices. Here, temperature-dependent and polarization-resolved photoluminescence excitation spectroscopy data, complemented by hybrid-functional first-principles calculations, are presented, and a microscopic model is derived that explains the interplay of hole migration, defect trapping, and carrier recombination at defects underlying thermal quenching phenomena in α- and β-Ga 2 O 3 . In α-Ga 2 O 3 , the UV emission is attributed to self-trapped holes, while the blue luminescence arises from defect-related processes, including gallium split vacancies and their defect complexes. Calculations reveal an energy barrier of 88 meV for self-trapped hole migration in α-Ga 2 O 3 , consistent with activation energies from temperature-dependent photoluminescence. This enables efficient trapping by defects, enhancing blue luminescence and quenching UV emission. In β-Ga 2 O 3 , a higher migration barrier of 0.36 eV reduces the defect trapping, allowing the UV self-trapped hole emission to remain intense, with blue luminescence emerging only at elevated temperatures. These results establish a direct link between self-trapped hole migration, defect trapping, and thermal quenching of emission in both phases. The insights advance the understanding of carrier dynamics in ultrawide bandgap oxides and may guide defect engineering for high-performance functional devices.

Hajizadeh, Nima [Leibniz-Institut im Forschungsver↗

DOE OSTI2024

Reactivity of Sulfur Vacancy-Rich MoS 2 to Water Dissociation

Exposed Mo atoms on the surface of MoS 2 can catalyze certain useful chemical reactions, including the dissociation of water to produce hydrogen. However, a comprehensive understanding of water reactivity on defective MoS 2 surfaces remains elusive. Here, we use in situ near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) to investigate water dissociation reactions on MoS 2 surfaces before and after Ar + ion beam bombardment. To make the surfaces reactive, we treated them with Ar + ion beam sputtering first, which created exposed Mo sites. Using ultraviolet photoelectron spectroscopy (UPS) and density of states calculations conducted using density functional theory (DFT), we verified that stripping the surface of sulfur atoms creates metallic surface states that can catalyze water dissociation. At elevated H 2 O pressures, XPS measurements combined with DFT calculations suggested the presence of four distinct surface species from dissociated water. Specifically, we found that oxides and hydroxides are prominent at the surface, while chemisorbed and physisorbed H 2 O molecules are also present. In conclusion, this study provides new insights that reveal the prospects of surface-engineered MoS 2 as a catalyst for water dissociation.

08 HYDROGEN↗

DOE OSTI2025

Anisotropic structure and optical engineering of strontium titanate and zirconia responding to sequential hydrogen and helium irradiation

Unraveling the correlation between strain engineering with anisotropic optical properties via nanoscale defects gradually evolved into a strategy for fundamental studies and technological applications, yet it remains understudied in functional complex oxides compared to metals and semiconductors. Here, the methodology of strain engineering for the determination of the lattice parameters, parallel/normal to the sample surface, in the individual layers of single-crystalline superlattices is derived, which is based on analysis of high-angle X-ray diffraction measurements in combination with diffraction reciprocal space mapping. With modeling that takes into account the effect of elastic properties, two elastically anisotropic materials, SrTiO 3 and ZrO 2 , have been compared in terms of defect-induced elastic strain caused by individual and sequential H + and He 2+ irradiation. The anisotropic lattice swelling with corresponding refractive index, and obstructive behavior of elastic strain recovery are demonstrated in SrTiO 3 , while approaching strain behaviors accompanied by isotropic refractive index distribution in both orientations are confirmed in ZrO 2 . Under sequential He 2+ /H + irradiation, pre-existing He-vacancy complexes acted as vacancy traps, preferentially capturing H + clusters to induce lattice distortion and enhance absorption. Nanohardness increments (ΔH) calculated by the DBH model matched nanoindentation results, confirming that sequential irradiation generated higher indentation yield stress than individual irradiations.

Anisotropic expansion↗

DOE OSTI2025

Corrosion susceptibility and chromium loss in Austenitic steels and Nickel-based alloys in molten FLiNaK at 700 °C

A comparative study was conducted to evaluate the corrosion susceptibility of 316L, 316H, Ni 200, Inconel 625, and Hastelloy N in molten FLiNaK at 700 °C for 100 h. Top-view and cross-sectional scanning electron microscopy (SEM) imaging, combined with energy-dispersive X-ray spectroscopy (EDS) mapping, was performed to investigate microstructural and compositional changes. SEM images were further processed by introducing a contrast threshold to map cavity distribution. Using EDS mapping, intergranular and intragranular Cr loss were separately characterized. The ranking of mass loss after corrosion, from highest to lowest, is as follows: 316H > 316L > Inconel 625 > Hastelloy N > Ni 200. Cr loss was found to be correlated with Mo concentration, in agreement with many previous studies, with higher Mo content resulting in reduced Cr loss. On the other hand, there is no evidence that the high carbon content in 316H enhances corrosion resistance. The relatively low solubility of carbon in austenite at the testing temperature limits the amount of dissolved carbon. Therefore, the carbon-retarded vacancy diffusion, and consequently the reduced Cr diffusion, were not observed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2025

Mechanistic insights into rubidium ion adsorption at the quartz (101) surface from quantum chemical metadynamics

Ion sorption extent and mechanism depend in part on the mineral surface termination, which can be highly complex. Variations in surface functional groups, particularly with defect density and surface roughness, influence mineral reactivity towards solutes. In this work, we investigate the adsorption of a rubidium cation (Rb + ) at pristine and defect quartz (101) surface sites using well-tempered metadynamics, based on simulations with the quantum chemical density-functional tight-binding (DFTB) method. We compare the relative energetics of Rb + adsorption across selected sites for each surface, with nanosecond-level sampling, highlighting similarities between vicinal and geminal silanol sites. We find that the positive Rb + partial atomic charge can increase by as much as 0.5e as it approaches the surface, with implications for modulation of ion adsorption strength and extent at the quartz (101) surface with surface vacancies, silanol coverage, and charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Realizing tunable Fermi level in SnTe by defect control

The tuning of the Fermi level in tin telluride, a topological crystalline insulator, is essential for accessing its unique surface states and optimizing its electronic properties for applications such as spintronics and quantum computing. In this study, we demonstrate that the Fermi level in tin telluride can be effectively modulated by controlling the tin concentration during chemical vapor deposition synthesis. By introducing tin-rich conditions, we observed a blue shift in the x-ray photoelectron spectroscopy core-level peaks of both tin and tellurium, indicating an upward shift in the Fermi level. Further, this shift is corroborated by a decrease in work function values measured via ultraviolet photoelectron spectroscopy, confirming the suppression of Sn vacancies. Our findings provide a low-cost, scalable method to achieve tunable Fermi levels in tin telluride, offering a significant advancement in the development of materials with tailored electronic properties for next-generation technological applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1998

Elevated Temperature Deformation of Cr3Si Alloyed with Mo

Four-point bend, constant load compressive creep and constant engineering strain rate tests were conducted on arc-melted and powder-metallurgy (PM) processed Cr40Mo30Si30 specimens in the temperature range 1400 and 1700 K. This is a two phase alloy consisting of (CrMo)3Si and (Cr,Mo)5Si3 phases. The PM specimens, which were substantially weaker than the arc-melted materials, exhibited a stress exponent n, of about 2 and an apparent activation energy for creep, Q(sub 3), of 485 kJ/mol. The mechanism in these specimens appeared to be controlled by creep of a glassy phase. In the case of arc-melted specimens for which nis approximately 3 and Q(sub 3) is approximately 430 kJ/mol, the rate-controlling creep mechanism appeared to be that dominant in the (Cr,Mo)5Si3 phase. In this case, it is suggested that the Nabarro creep mechanism, where dislocation climb is controlled by Bardeen-Herring vacancy sources, is the dominant creep mechanism. Finally, an analysis of the present and literature data on Cr3Si alloyed with Mo appeared to suggest that the creep rate decreases sharply with an increase in the Mo/Si ratio.

Raj, S. V.↗