Obtaining visual information during instrument flying
Visual observations of flight instruments by pilot
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Visual observations of flight instruments by pilot
Visual observation of distant objects in space by optical filtering
Visual observation of Jupiter disk, belt motions, and belt intensity variations
Radio, optical, and visual observations were made of Comet Kohoutek (1973f) using facilities of the National Radio Astronomy Observatory (NRAO) and of the Hawaii Night Sky Observatory, State University of New York at Albany (SUNYA). Transit observations were made using the NRAO 300 ft radio telescope on six consecutive days beginning November 24, 1973. Observations were carried out in the continuum at 11 cm using the 4-feed system at different position angles. The data were recorded on magnetic tape and were computer reduced. Results were negative, with an rms error of 62 milli flux units, giving an upper limit of 180 mfu for the 11 cm continuum emission from the Comet. This relatively high detection limit resulted from a combination of interference and bad weather that affected these pre-perihelion observations. No observations could be scheduled near or after perihelion.
Photographic and visual observations made at new mexico state university observatory
Visual observation inspection device for bonded honeycomb sandwich structures using birefringent plastic coatings
A total of 82 visual events was reported by two dark-adapted astronauts during a 90-minute orbit at 225 km altitude. Silver chloride crystal events for that orbit totaled 69 stopping protons and alphas per sq cm and 304 heavy ions with stopping power of 150 MeV sq cm/g or greater. The frequency of visual observations near the geomagnetic poles corresponds to calculated abundances of ions with LET greater than 5 keV per micrometer in tissue. Nuclear collisions of fast protons on C, N, and O in the retina or the abundance of stopping protons can explain the low frequency of events in the SAA for this mission in comparison with the high frequency during Skylab IV at 443 km altitude.
It is argued here that most of the variation in observations of the solar radius of over three centuries measure properties of the sun's limb darkening function and are affected by many sources of degradation of the solar image. They do not directly measure a true solar radius. From a long series of visual observations made by a single observer as well as recent photoelectric observations, evidence is found for periodicities in the apparent radius that occur in both modern and historical records. The magnitude of the observed variations is quite different in visual and photoelectric observations, suggesting that the process responsible for the periodicities is either one that modifies the solar limb darkening function or one that causes systematic variations in image blurring by the earth's atmosphere. A connection between solar magnetic activity an apparent radius seems likely, with evidence for such a relation dating back as fast as the Maunder minimum.
Visual observations are investigated of color differences of Serenitatis mare materials from orbit complement photography and other remotely sensed data. The light tan gray inner fill of the Serenitatis basin is younger than the dark blue gray annulus; the latter continues into and appears to be contemporaneous with the fill of Mare Tranquillitatis. Mare ridges occur in both the inner basin fill and the dark annulus of Serenitatis. Ridges are interpreted as the result of structural deformation and up-doming after the solidification of the basaltic lavas. On the southeastern rim of the Serenitatis basin is the darkes blue gray unit within which Apollo 17 landed. Highland massifs surrounding this unit have unstable slopes which are believed to be the result of localized tectonic activity. On the southwest rim of the basin are the dark tan to brown gray mantling materials of the Sulpicius Gallus Formation. Farther west on the rim are dark blue grap patches which resemble the mare material of the Serenitatis dark annulus.
Visual observations of color differences of Serenitatis mare materials from orbit complement photography and other remotely sensed data. The light tan gray inner fill of the Serenitatis Basin is younger than the dark blue gray annulus; the latter continues into and appears to be contemporaneous with the fill of Mare Tranquillitatis. Mare ridges occur in both the inner basin fill and the dark annulus of Serenitatis. Ridges are interpreted as the result of structural deformation and up-doming after the solidification of the basaltic lavas. On the southeastern rim of the Serenitatis Basin is the darkest blue gray unit within which Apollo 17 landed. Highland massifs surrounding this unit have unstable slopes which are believed to be the result of localized tectonic activity. On the southwest rim of the basin are the dark tan to brown gray mantling materials of the Sulpicius Gallus Formation.
Observations of lunar transient phenomena for the Association of Lunar and Planetary Observers (ALPO) are reported. The procedures for making visual observations for estimating albedo are described, and the reported albedo analyzed for lunar topographic features. It is shown that a catalog or scale of albedos can be established for each feature.
Weather constraints to launching space vehicles are designed to prevent loss of the vehicle or mission due to weather hazards (See, e.g., Ref 1). Constraints include Lightning Launch Commit Criteria (LLCC) designed to avoid natural and triggered lightning. The LLCC currently in use at most American launch sites including the Eastern Range and Kennedy Space Center require the Launch Weather Officer to determine the height of cloud bases and tops, the location of cloud edges, and cloud transparency. The preferred method of making these determinations is visual observation, but when that isn't possible due to darkness or obscured vision, it is permissible to use radar. This note examines the relationship between visual and radar observations in three ways: A theoretical consideration of the relationship between radar reflectivity and optical transparency. An observational study relating radar reflectivity to cloud edge determined from in-situ measurements of cloud particle concentrations that determine the visible cloud edge. An observational study relating standard radar products to anvil cloud transparency. It is shown that these three approaches yield results consistent with each other and with the radar threshold specified in Reference 2 for LLCC evaluation.
Visual observations and pressure measurements in the cavitation zone of a submerged journal bearing are described. Tests were performed at various shaft speeds and ambient pressure levels. Some photographs of the cavitation region are presented showing strong reverse flow at the downstream end of the region. Pressure profiles are presented showing significant pressure variations inside the cavitation zone, contrary to common assumptions of constant cavitation pressure.
Visual observations and pressure measurements in the cavitation zone of a submerged journal bearing are described. Tests are run at speeds of 1840 and 3000 rpm, and at each speed, four different levels of the ambient supply pressure are applied, ranging from 13.6 KPa to 54.4 KPa. A strong reverse flow is detected inside the cavitation area adjacent to its downstream end, and significant pressure variations on the order of 50 KPa are found inside the cavitation region at the downstream portion of its circumferential extent. Results indicate that the assumption of a constant cavitation pressure is incorrect in the case of enclosed cavitations, and it is postulated that oil which is saturated with air under atmospheric pressure becomes oversaturated in the subcavity pressure loop.
Fulfilling the promise of an era of great observatories, NASA now has more than three space-based astronomical telescopes operating in different wavebands. This situation provides astronomers with a unique opportunity to simultaneously observe with multiple observatories. Yet scheduling multiple observatories simultaneously is highly inefficient when compared to single observatory observations. Thus, programs using multiple observatories are limited not due to scientific restrictions, but due to operational inefficiencies. Each year, a number of proposals are accepted by a space-based observatory for conduction of astronomical observations and gathering of science data for the study of galactic events. Since each space-based observatory uses a set of instruments designed to operate in specific energy regions, most such studies are conducted by submitting observation proposals to multiple observatories, with requests to coordinate among themselves. To assure that the proposed observations can be scheduled, each observatory's staff has to check that the observations are valid and meet all the constraints for their own observatory; in addition, they have to verify that the observations satisfy the constraints of the other observatories. Thus, coordinated observations require painstaking manual collaboration among the observatory staff at each observatory. In order to exploit new paradigms for observatory operation, the Goddard Space Flight Center's Advanced Architectures and Automation Branch has developed a prototype tool called the Visual Observation Layout Tool (VOLT). The main objective of VOLT is to provide a visual tool to automate the science planning of coordinated observations for multiple spacecraft, as well as to increase the scheduling probability of observations. However, VOLT is also useful for single observatory planning to optimize observatory control. Three space-based missions are interested in using VOLT (the Hubble Space Telescope, the Chandra X-Ray Observatory, and the Far Ultraviolet Spectroscopic Explorer). The VOLT team members have collaborated with these missions to gather requirements and obtain feedback on their mission planning processes. VOLT has been developed as a cross-platform Java client application for use by scientists and observatory science planning staff to visualize scheduling options and constraints. It also supports a lightweight graphical user interface for remote viewing via a Web front end. Additionally, it uniquely supports the ability to interact with multiple, diverse scheduling packages in order to determine windows of opportunity for observations and visually portray the constraints of each observation request. VOLT enables science data capture scenarios which are currently either impossible, or which require extensive time and manpower to coordinate amongst multiple observatories. it supports early detection of planning conflicts by generating coordinated solutions based on observatory schedulability and constraints. The project development approach has included frequent prototype demonstrations to our interested missions to obtain feedback after each release of the software. We will present an overview of our lessons learned in infusing the VOLT tool into the operations of the missions we have collaborated with and a brief demonstration of the software.
This paper describes the results of the first field-scale demonstration conducted to evaluate the performance of nanoscale emulsified zero-valent iron (EZVI) injected into the saturated zone to enhance in situ dehalogenation of dense, nonaqueous phase liquids (DNAPLs) containing trichloroethene (TCE). EZVI is an innovative and emerging remediation technology. EZVI is a surfactant-stabilized, biodegradable emulsion that forms emulsion droplets consisting of an oil-liquid membrane surrounding zero-valent iron (ZVI) particles in water. EZVI was injected over a five day period into eight wells in a demonstration test area within a larger DNAPL source area at NASA's Launch Complex 34 (LC34) using a pressure pulse injection method. Soil and groundwater samples were collected before and after treatment and analyzed for volatile organic compounds (VOCs) to evaluate the changes in VOC mass, concentration and mass flux. Significant reductions in TCE soil concentrations (>80%) were observed at four of the six soil sampling locations within 90 days of EZVI injection. Somewhat lower reductions were observed at the other two soil sampling locations where visual observations suggest that most of the EZVI migrated up above the target treatment depth. Significant reductions in TCE groundwater concentrations (57 to 100%) were observed at all depths targeted with EZVI. Groundwater samples from the treatment area also showed significant increases in the concentrations of cis-1,2-dichloroethene (cDCE), vinyl chloride (VC) and ethene. The decrease in concentrations of TCE in soil and groundwater samples following treatment with EZVI is believed to be due to abiotic degradation associated with the ZVI as well as biodegradation enhanced by the presence of the oil and surfactant in the EZVI emulsion.
This paper describes the results of the first field-scale demonstration conducted to evaluate the performance of nano-scale emulsified zero-valent iron (EZVI) injected into the saturated zone to enhance in situ dehalogenation of dense, non-aqueous phase liquids (DNAPLs) containing trichloroethene (TCE). EZVI is an innovative and emerging remediation technology. EZVI is a surfactant-stabilized, biodegradable emulsion that forms emulsion droplets consisting of an oil-liquid membrane surrounding zero-valent iron (ZVI) particles in water. EZVI was injected over a five day period into eight wells in a demonstration test area within a larger DNAPL source area at NASA's Launch Complex 34 (LC34) using a pressure pulse injection method. Soil and groundwater samples were collected before and after treatment and analyzed for volatile organic compounds (V005) to evaluate the changes in VOC mass, concentration and mass flux. Significant reductions in TCE soil concentrations (>80%) were observed at four of the six soil sampling locations within 90 days of EZVI injection. Somewhat lower reductions were observed at the other two soil sampling locations where visual observations suggest that most of the EZVI migrated up above the target treatment depth. Significant reductions in TCE groundwater concentrations (57 to 100%) were observed at all depths targeted with EZVI. Groundwater samples from the treatment area also showed significant increases in the concentrations of cis-1,2-dichloroethene (cDCE), vinyl chloride (VC) and ethene. The decrease in concentrations of TCE in soil and groundwater samples following treatment with EZVI is believed to be due to abiotic degradation associated with the ZVI as well as biodegradation enhanced by the presence of the oil and surfactant in the EZVI emulsion.
Results of a test of the use of a Lightning Detection and Ranging (LDAR) remote display in the Patrick AFB RAPCON facility are presented. Agreement between LDAR and radar precipitation echoes of the RAPCON radar was observed, as well as agreement between LDAR and pilot's visual observations of lightning flashes. A more precise comparison between LDAR and KSC based radars is achieved by the superposition of LDAR precipitation echoes. Airborne measurements of updrafts and turbulence by an armored T-28 aircraft flying through the thunderclouds are correlated with LDAR along the flight path. Calibration and measurements of the accuracy of the LDAR System are discussed, and the extended range of the system is illustrated.