Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Viability of Small Dimension Crew Quarters for Surface Habitation

During early planning for the Artemis program’s sustained phase of lunar activity, NASA planners have been held to work towards a NASA reference lunar lander concept. With this activity taking place prior to the awarding of a lander contract, NASA planners cannot assume which of several potential landers will be available. This has limited habitation team engineers to a 12-metric ton mass limit for the reference concept of the lunar Surface Habitat. Consequently, minimal approaches have been applied to many habitat systems and it is important to determine acceptable volume for crew quarters. A number of both NASA and non-NASA surface habitat concepts have proposed relatively small crew quarters due to this constraint. Consequently, there is a need to collect objective test data to confirm or refute the validity of small crew quarters. NASA-STD-3001 is looked to for guidance in its many standards but offers little to no help. While prior versions called for private habitation, the current version – Revision B – calls for “individual privacy” to “accommodate social retreat.” Proposed Revision C modifications change the language slightly to “accommodate sleep and social retreat.” This is not enough guidance to determine the size of a crew quarters or even its capabilities. Unfortunately, only a small number of US spacecraft have included crew quarters, primarily the International Space Station and the Skylab Space Station. The space shuttle orbiter sometimes flew a set of private bunks that some might consider a crew quarters. All of these are dramatically smaller than US standards for minimum jail cells. The first opportunity for NASA to test a small crew quarters in a surface habitat application has been created through the Exploration Atmospheres test series, which is evaluating human performance under reduced cabin pressures. The test is converting the 20-Foot Vacuum Chamber at Johnson Space Center into a habitat, with the lower level outfitted as an EVA test area and the upper two levels for human habitation. The test will place eight people (six test subjects and two technicians) inside the chamber for eleven days. All eight will sleep in private quarters during the test. Volume limitations in the chamber forced extremely small crew quarters, measuring approximately 2 meters in length, 0.85 meters in height, and 0.9 meters in width. The test cabin pressure of 8.2 psi and elevated oxygen also introduces significant material limitations, limiting outfitting options. Nonetheless, the crew quarters design requirements were to accommodate visual separation, auditory separation, olfactory separation, tactile separation, air flow control, lighting control, single person personal computing, physical work surface access, sleep accommodations, non-sleep rest/relaxation, meditation, stretching, two-person meetings, snacking, changing clothes, viewing appearance, video communication, and audio communication. This paper will detail the acceptability of the crew quarters as measured in the October 2021 Exploration Atmosphere test. Based on this data, the viability of the type of crew quarters used in the 20 Foot Chamber will be assessed. Design recommendations for a 30-60-day Surface Habitat crew quarters will be provided, along with recommendations for future testing.

Crew Quarters↗
NASA NTRSDate not supplied

The Influence of Viability, Independence, and Self-Governance on Trust and Public Acceptance of Uncrewed Air Vehicle Operations

Trust is expected to be a critical construct that drives successful use of advanced air mobility (AAM) technologies. As yet, though, the role of trust in human-autonomy interaction is underexplored. Kaber (2018) argues that autonomy requires the highest level of three independent dimensions -- viability, independence, and self-governance. The present study examined whether trust varies across the three dimensions of autonomy under varying levels of risk. Participants in the high-risk group read a series of vignettes on a drone that delivers medical supplies over a city where the current study was conducted. Participants in the low-risk group read a series of vignettes on a drone that delivers fast food over a fictitious city. Each vignette described a drone that is either autonomous (i.e., possesses all dimensions) or automated (i.e., one of the dimensions is compromised). Results imply that the three dimensions of autonomy do not equally influence human-technology trust and behavior.

Advanced Air Mobility↗
NASA NTRSDate not supplied

Surviving Night at the Lunar South Pole: Exploring Viability of Radioisotope Power Systems for a Crewed Rover

Spacecraft thermal environments tend to be extreme, and the lunar surface is no exception. Future lunar missions aim to explore the lunar south pole region, focusing on permanently shadowed region (PSRs) that may act as cold traps for volatile elements such as hydrogen. By careful selection of landing sites, the longest continuous period devoid of insolation near these PSRs can be reduced significantly from the maximum of 354 hours. Future NASA missions aim to allow exploration of PSRs with a crewed lunar rover. Program architectures may impose a requirement that the vehicle be able to survive repeated lunar nights. Surface temperatures at southern latitudes can be lower than 100K during night, causing significant energy demands heating components above keep-alive temperatures. This adversely affects lunar programs which are heavily mass-constrained. A technical exploration of various radioisotope power systems and their viability, benefits, and drawbacks was completed. An analysis was also performed examining potential vehicular mass reduction and increased lunar night survivability due to the inclusion of radioisotope power sources. The results of this analysis were compared to a baseline non-nuclear vehicle utilizing only batteries and solar arrays for energy storage.

radioisotope↗
DOE OSTI2024

Demonstrate Viability of Accelerated Fuel Qualification Approaches

This presentation summarizes the research under LDRD grogram, Demonstrate Viability of Accelerated Fuel Qualification Approaches. It is demonstrated that the fabrication process of uranium carbide fuel has been developed and neutronic, thermal and hydraulic analysis have been conducted for the Fission Accelerated Steady-state Testing (FAST). This program provides basis of expansion of FAST as an efficient platform to broad nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Viability and Financial Evaluation of Agrivoltaic Systems in Concord Grape Vineyards

Agrivoltaic systems, combining agriculture and solar photovoltaics (PV), present a forward- looking solution to global challenges in food security and the energy crisis. It can actualize co- located power generation and crop production, effectively mitigating land use conflicts between the solar industry and agriculture [1]. Presently, agrivoltaic research primarily focuses on conventional farmland. To promote the development of agrivoltaics, it’s essential to explore and study diverse application scenarios. Concord grape vineyards in New York consistently experience financial losses, prompting growers to seek additional revenue streams to preserve Concord grape industries [2]. This study presents the pioneering proposal for integrating solar PV into Concord vineyards. Through viability and financial assessment, this agrivoltaic system demonstrates the potential to alleviate grower losses and boost solar developers’ income, establishing a mutually beneficial scenario. Furthermore, it provides a conceptual approach for other vineyards facing similar challenges to mitigate losses and sustain local grape culture.

Williams, Henry J↗
DOE OSTI2023

Developing a roadmap for carbon capture, and storage in Oklahoma by assessing the viability of stacked storage

Abstract The Intergovernmental Panel on Climate Change concludes that CO 2 capture and storage (CCS) is critical for climate‐stabilizing energy transitions. In CCS, captured CO 2 is sequestered in saline aquifers within sedimentary basins. The CO 2 storage capacity and the rate of injection are functions of the geology of the saline aquifer, which is uncertain. To minimize impacts of this uncertainty, CCS projects could include backup plans, such as co‐locating geologic CO 2 storage (GCS) sites with or near existing CO 2 ‐enhanced oil recovery (CO 2 ‐EOR) operations. These “stacked storage” projects could hedge against uncertainty in the saline formation performance because captured CO 2 could be injected into either location in the event of unexpected events (e.g., the injectivity decreases). Here, we investigate the possibility and ramifications of developing CCS networks in Oklahoma that are amendable to stacked storage. We find that stacked storage is possible in Oklahoma but the counties with the lowest‐cost saline storage resources do not have existing CO 2 ‐EOR operations. At the systems level, we find it is slightly more expensive (e.g., $1/tCO 2 to $5/tCO 2 ) to site GCS in counties with CO 2 ‐EOR projects. This increased expense is largely due to increased CO 2 transportation costs because hundreds of km of additional pipeline is required to capture CO 2 from the lowest‐cost sources. Overall, our results suggest that it is optimal to build more pipelines and avoid injecting CO 2 in some of the lowest‐cost saline storage resources, to enable capturing CO 2 from the least‐cost sources. © 2023 Society of Chemical Industry and John Wiley & Sons, Ltd.

42 ENGINEERING↗
DOE OSTI2022

Application of a Novel Heat Pump Model for Estimating Economic Viability and Barriers of Heat Pumps in Dairy Applications in the United States

Heat pumps represent an important opportunity for energy savings and decarbonization. This work investigates the techno-economic performance of high-temperature heat pumps (HTHPs) for use in the U.S. dairy industry. The studied heat pump performs a 50 °C temperature lift on a waste heat stream of cleaning water and applies the upgraded heat stream to a fluid milk pasteurization process. This work involved the creation of a HTHP model that estimated the coefficient of performance (COP), internal rate of return (IRR), net present value (NPV), and payback period (PBP), and emissions saved for a heat pump replacing a natural gas boiler. Capital costs, operations, and maintenance (O&M) cost, heat pump lifetime, electricity prices, natural gas prices, and a cost of carbon were varied to perform a parametric study on the factors affecting the break-even price of HTHPs. The results show that HTHP economics are highly sensitive to COP and energy price environment, and less sensitive to capital and O&M cost variance, leading to a large scatter of positive and negative NPVs based on U.S. location. PBPs demonstrate a defined threshold, based on energy price environment, below which favorable two-to-three-year PBPs predominate. This work is focused on the U.S. dairy industry, but international application in relation to fossil vs. electricity price regimes. Heat pumps have seen wider adoption in regions with a high ratio of fossil energy to electricity prices ($/MMBTU vs. $/kWh). The U.S. has plentiful natural gas resulting in lower fossil energy prices which has reduced heat pump adoption. This paper identifies potential first mover industries for HTHP adoption and their associated price regimes even in regions with lower ratios of fossil energy to electricity prices that exist many places globally.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION,↗
DOE OSTI2024

Performance and economic viability assessment of a novel CO 2 adsorbent for manufacturing and integration with coal power plants

Here, this study assesses the performance and economic feasibility of a novel CO 2 adsorbent for post-combustion capture in DOE/NETL’s 650 MWnet SubC PC power plant (case B11B). Bench-scale tests showed an initial adsorption capacity of 16.3 wt%, which decreased to 12.1 wt% after 41 adsorption–desorption cycles due to induced particle aggregation by over-humidification. With a conservative adsorption capacity of 8.8 wt% and 695 adsorption–desorption cycles, an adsorbent replenishment rate of 10 tonnes/h is necessary to capture 90% of CO 2 . The breakeven sale price of the adsorbent produced at this rate is $\$$1,293/tonne, which is 40 to 80 times lower than prices for K 2 CO 3 adsorbents reported in the literature (e.g., K 2 CO 3 /TiO 2 , K 2 CO 3 /ZrO 2 ) while providing better capture performances. Sensitivity analysis reveals that increasing the plant production rate from 10 to 40 tonnes/h reduces the sale price by 8%. The study also compares the CO 2 capture cost to Cansolv, an integrated solvent-based technology. The novel adsorbent requires 2.4 GJ/tonne of CO 2 for regeneration, lower than Cansolv’s 2.7 GJ/tonne. With conservative performance estimates, the capture cost is $\$$54/tonne of CO 2 , slightly higher than Cansolv’s $\$$45/tonne. To achieve lower or comparable capture costs to Cansolv, the adsorbent should meet one of the following conditions at a commercial scale: minimum 950 cycles, 16 wt% capture capacity, 50% of the adsorbent recovery, or a reduced cost to $\$$646/tonne by upscaling the manufactury to 75 tonnes/h.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

On the viability of stimulated hydrogen generation from iron-rich formations

Hydrogen-based technologies present a promising solution for the global energy transition. In addition to electrolytic production, subsurface geological formations provide a potential natural source of hydrogen. Iron-rich ultramafic rocks, in particular, are favorable for hydrogen generation through natural processes such as serpentinization. Naturally occurring reactions and migration can be enhanced through various types of stimulation, including thermal, hydraulic, and chemical treatment. Through numerical simulations, we analyzed the complex interplay of factors influencing the production and migration within the subsurface, emphasizing the importance of different stimulation techniques, catalysts, and conditions. Our findings indicate that key parameters, such as damage zone permeability and width, significantly impact producible hydrogen mass. Our results indicate that a combination of large damage zone widths, high permeability, and a stimulated reaction rate of 1 × 10 -9 can yield economically viable production rates of up to 1 kg s -1 at the wellhead. Moreover, the availability of ferrous iron, rather than the serpentinization rate itself, has been identified as the primary limiting factor in achieving economically sustainable hydrogen production. In conclusion, while an unstimulated rock volume of 0.165 km 3 yields only 45t of hydrogen in two years, various stimulation techniques can increase production to 18500t.

08 - HYDROGEN↗
DOE OSTI2026

A comparative assessment of the economic viability of nuclear-integrated direct air capture systems

Direct air capture (DAC) systems require heat and electricity to operate, which can be supplied by nuclear power plants (NPPs). In this study, the performance and cost of various conceptual nuclear-DAC systems are assessed, and their performance is compared with several non-nuclear options. Three nuclear-DAC systems are considered: (1) a liquid solvent direct air capture (L-DAC) system with heat supplied from natural gas (NG) and electricity supplied by an NPP, (2) an electrified L-DAC system, fully powered by electricity from an NPP, and (3) a solid sorbent direct air capture (S-DAC) system utilizing both heat and electricity generated by an NPP. Two nuclear technologies are considered: a pressurized water reactor and a high-temperature gas-cooled reactor. Under the medium conservatism scenario, the levelized cost of direct air capture (LCOD) for these systems range from $\$$310/tCO 2 to $\$$525/tCO 2 with the L-DAC system having an NG heat supply at the lower end of the range, and the electrified L-DAC system and the S-DAC system at the higher end of the range. Coupling with nuclear energy led to a 21 % reduction in LCOD for the L-DAC system with NG heat supply and a 29 % reduction for the S-DAC system when compared to fully NG-powered options. When powering the DAC system with grid electricity, the LCOD is highly dependent on the assumed electricity price and carbon intensity. The nuclear option is the cheaper choice when the price of low-carbon grid electricity exceeds $\$$95/MWh and $\$$45/MWh for the L-DAC and S-DAC systems, respectively.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Viability of Additively Manufactured Electrodes for Lithium-Ion Batteries

As the global economy becomes increasingly electrified, the demand for batteries and energy storage is expected to rise significantly, particularly in the transportation and electricity sectors. Lithium-ion batteries (LIBs) are currently the most advanced and widely used technology in this field. Traditionally, LIBs are manufactured using simple 2D planar geometries to maximize production efficiency and minimize costs. However, this approach limits energy density due to the restricted design flexibility of the electrodes. Additive manufacturing (AM) offers a promising solution to enhance the energy density and efficiency of LIBs by enabling the design of architectures that reduce diffusive losses and allow for a greater amount of active material to be incorporated within the same device footprint, thereby minimizing the use of inactive materials. Different AM techniques come with their own set of limitations, including printing speed, material compatibility, and scale, which must be considered when designing electrodes. Scalable and cost-effective methods are particularly important for electric vehicle batteries, while achieving higher energy densities in microbatteries is crucial for the miniaturization of wearable electronics and medical devices. Here, in this study, we simulate various 3D porous electrode designs for LIBs using graphite and nickel manganese cobalt oxide (NMC) electrodes. These designs are selected to represent structures that could be produced using different AM techniques, such as direct ink writing, fused deposition modeling, and stereolithography. Our results indicate that at higher charging rates and increased areal mass loading, 3D structures can outperform traditional 2D electrodes, although the benefits may diminish with more complex designs that are harder to manufacture. The observed gains in energy density are attributed to improved electrode utilization and reduced diffusive energy losses. This comprehensive analysis of structure–performance relationships will provide valuable insights to guide future research on 3D designs, material selection, and AM techniques for additively manufactured battery electrodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Optimizing Process Conditions during Catalytic Fast Pyrolysis of Pine with Pt/TiO 2 —Improving the Viability of a Multiple-Fixed-Bed Configuration

Catalytic fast pyrolysis (CFP) has been identified as a promising pathway for the production of renewable fuels and co-products. However, continued technology development is needed to increase process efficiency and reduce process costs. This report builds upon previous research in which a bifunctional metal–acid Pt/TiO 2 catalyst was utilized in a fixed-bed reactor operated with co-fed H 2 to improve product yield and reduce coke generation compared to conventional CFP methods. Here, we report further process optimization, in which we achieved similar CFP oil carbon efficiency (>35%) and CFP oil oxygen content (<20 wt %) to our previous report while reducing catalyst and equipment costs by increasing time-on-stream between regenerations by 40–95% and decreasing required regeneration time by more than a factor of 2. These process improvements were achieved by conducting parameter sweeps to determine optimum conditions for CFP and regeneration with key variables including pyrolysis temperature, catalytic upgrading temperature, hydrogen partial pressure, and regeneration oxygen concentration. Coupled with comprehensive oil analyses, these data provide foundational insight into the deoxygenation and coking chemistries for CFP under realistic process conditions while also advancing the technology through applied engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗