Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “UT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Connecting Surface Emissions, Convective Uplifting, and Long-Range Transport of Carbon Monoxide in the Upper Troposphere: New Observations from the Aura Microwave Limb Sounder

Two years of observations of upper tropospheric (UT) carbon monoxide (CO) from the Aura Microwave Limb Sounder are analyzed; in combination with the CO surface emission climatology and data from the NCEP analyses. It is shown that spatial distribution, temporal variation and long-range transport of UT CO are closely related to the surface emissions, deep-convection and horizontal winds. Over the Asian monsoon region, surface emission of CO peaks in boreal spring due to high biomass burning in addition to anthropogenic emission. However, the UT CO peaks in summer when convection is strongest and surface emission of CO is dominated by anthropogenic source. The long-range transport of CO from Southeast Asia across the Pacific to North America, which occurs most frequently during boreal summer, is thus a clear imprint of Asian anthropogenic pollution influencing global air quality.

upper tropospheric (UT)↗
DOE OSTI2025

Integration of renewable energy generation and storage systems for emissions reduction in an islanded campus microgrid

Microgrid connected building communities are projected to play an integral part in the clean energy transition. These types of systems, when integrated with distributed energy resources (DERs) such as combined heat and power (CHP), district heating and cooling, renewable generation, and energy storage, can provide clean, reliable power to critical facilities and vulnerable communities. The intermittent nature of renewable generation is a challenge when integrating renewables into any grid system, but particularly in islanded microgrids. The University of Texas at Austin (UT) operates an islanded microgrid powered by a CHP plant, while also utilizing district heating and cooling systems and thermal energy storage (TES). High fidelity operating data was used to develop a validated reduced order model of UT’s integrated campus energy systems to serve as a testbed for use in a case study. Hypothetical renewable energy installations on land owned by UT in west Texas were modeled and integrated into the validated campus models along with battery energy storage (BES). Simulations showed that a combination of renewable energy from wind, and optimally controlled 24-hour thermal and battery storage systems could reduce carbon dioxide emissions on campus by 45.4%. The additional retrofit of burner systems to utilize hydrogen natural gas blends resulted in an overall annual emissions reduction of 54.7%. Carbon capture and storage eliminated the majority of the remaining emissions with increased plant energy expenditure. The presented simulations display the practical limitations of a CHP system complemented by renewable generation and short-term storage in eliminating emissions. Furthermore, results highlight the need for further research and development in long duration storage technologies and hydrogen fueled turbines to increase penetration of renewable energy and reduce emissions.

CHP↗
DOE OSTI2025

Ultra-high temperature testing and performance of L-PBF C103

Additive Manufacturing (AM) of refractory alloys is gaining traction as a materials processing route for components subject to extreme temperature environments. Due to the low oxidation resistance of refractory alloys, novel methods for evaluating their elevated temperature performance must be developed. In this work, a Gleeble® 3800 thermomechanical load frame was modified to evaluate the mechanical properties of laser powder bed fusion (L-PBF) consolidated niobium alloy C103 ranging from room temperature (RT) to 1400 °C. The fixturing and sample geometry were designed to accommodate Joule heating and prevent damage to the test chamber. Oxidation of the samples was minimized via testing in vacuum level of 1E-5 Torr. Ultimate tensile strength (UTS), yield strength (YS), elongation, and strain-hardening behavior were determined as a function of temperature. L-PBF C103 presented an average UTS of ∼650 MPa and over 25 % elongation at RT. Above RT, the UTS and YS dropped then leveled off from 500 °C to 1000 °C with values ranging from ∼400 MPa to ∼460 MPa, which is consistent with dynamic strain aging observed in this class of alloys. The strength rapidly declined after 1200 °C to ∼150 MPa at 1400 °C. Fractography indicated ductile fractures for the C103 at all test temperatures, and Electron Backscatter Diffraction (EBSD) analysis revealed a textured microstructure and the presence of dynamic recrystallization within the necked region of the sample tested at 1400 °C.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Transverse single-spin asymmetries in $γ$ SIDIS as a direct probe of quark-gluon-quark longitudinal momentum structure

Transverse single-spin asymmetries in the semi-inclusive deep-inelastic production of isolated photons ($\gamma$SIDIS), $A_{UT}^{\gamma {\rm SIDIS}}$, provide an unprecedented opportunity to extract the quark-gluon-quark correlators $F_{FT}(x,x')$ and $G_{FT}(x,x')$ point-by-point in their full support $x,x'$. We utilize realistic models for these functions, based on input from the Sivers transverse momentum dependent parton distribution function and imposing constraints from the $d_2$ matrix element calculated in lattice QCD, in order to provide numerical estimates for $A_{UT}^{\gamma {\rm SIDIS}}$ at the Electron-Ion Collider (EIC). We thoroughly explore the EIC phase space in order to isolate in which regions the asymmetry can be sizable, finding it can be as much as $10\%$ or larger for certain kinematics. Given that $F_{FT}(x,x')$ and $G_{FT}(x,x')$ are basically unknown, $A_{UT}^{\gamma {\rm SIDIS}}$ will be an important future measurement to learn about multi-parton correlations in the nucleon.

Electron-Ion Collider↗
DOE OSTI2025

A Novel Thermodynamical Predictor of Tropical High‐Cloud Area Coverage: Estimated Anvil‐Outflow Stability

The stability at the lapse-rate tropopause (LRT) was previously defined as the upper-tropospheric stability (UTS and SUT) but might underestimate the stability control on high-level clouds, since there is little direct connection between convective processes and the thermal stratification at the LRT. Here, a novel estimated anvil-outflow stability (EAS) based on the minimum stability in the upper troposphere is proposed. At the Manus site, the results show that small and large values of the LRT-based UTS and SUT both correspond to strong divergence and frequent occurrence of high-level ice clouds. In contrast, smaller EAS corresponds to stronger convective outflows to produce likely more high-level ice clouds, with a strong negative correlation. In tropics, EAS better explains the geographic distribution of high-level cloud coverage (HCC) and its temporal variations than UTS and SUT. With a strong linear correlation, EAS is likely a simple useful predictor of HCC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Co-Registered In-Situ and Ex-Situ Dataset of Electrical, Acoustic, and CT Characteristics from Wire Arc Additive Manufacturing Process

Recent progress in sensing techniques and data analytics tools have significantly accelerated the development of Wire Arc Additive Manufacturing (WAAM) systems. This data centric approach emphasizes leveraging available data throughout the production process to optimize performance. Integration of extensive data analysis provides the opportunity to improve precision, reduce waste, and enhance the quality of produced parts. This method relies on AI/ML models and optimization techniques, which are developed using the data collected from various sources, including in-situ sensors, ex-situ imaging, and manufacturing process parameters. The quality and diversity of this data, along with the alignment between different data streams (achieved through spatiotemporal registration) are critical for the successful development of AI/ML and optimization models. In this work, we present a spatiotemporally registered dataset generated during the WAAM process of deposition of a rectangular block. The dataset includes the comprehensive description of deposition process, process parameters, in-situ collected welding characteristics, acoustic data, and X-Ray Computed Tomography analysis data for the build. Dataset A Co-Registered In-Situ and Ex-Situ Dataset of Electrical, Acoustic, and CT Characteristics from Wire Arc Additive Manufacturing Process has arisen under UT-Battelle, LLC’s Prime Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy (DOE) to manage and operate the Oak Ridge National Laboratory. UT-Battelle, LLC will not assert any rights under United States law or under the Prime Contract it has in the dataset against any user of the dataset, including any copyrights or patent rights. UT-Battelle, LLC requests that attribution to the dataset is provided as academically appropriate.

42 ENGINEERING↗
NASA NTRS1974

Pioneer Solar Plasma and Magnetic Field Measurements in Interplanetary Space During August 2-17, 1972

Solar wind plasma and magnetic field measurements from Pioneers 9 and 10 during August 2-17, 1972, reveal complex and large-amplitude variations on a one-hour time scale and numerous discontinuities. During this time period an approximate radial alignment of the two spacecraft as seen from the Sun occurred with heliocentric distances of 0.8 AU for Pioneer 9 and 2.2 AU for Pioneer 10, both at 45 deg east of the Earth's solar longitude. The peak hourly average solar wind proton bulk velocity measured at Pioneer 9 was 990 km sec (exp -1) during hour 0 UT of August 5. The peak hourly average proton number density was 62 cm (exp -3) during hour 11 UT of August 3. The peak solar wind speeds are generally much reduced at Pioneer 10 compared with those observes at Pioneer 9. The peak 30 minute average magnetic field magnitude was 85 gamma during 1245 - 1315 UT of August 3. The Pioneer 9 data indicate passage of four fast forward interplanetary shocks, and one slow forward interplanetary shock.

Mihalov, J. D.↗
NASA NTRS1979

Physical parameter analysis of an intense, compact subflare

Results of analysis of Skylab X-ray proportional counter data (10-s averages) and X-ray telescope filtergrams for the August 9, 1973 (SN/M2) subflare from McMath 12474 (NOAA AR 185) are presented. The event flux profiles and profiles of temperature, volume emission-measure, and a quantity equivalent to thermal energy content are shown. Using the proportional counter data, a peak temperature in excess of 20,000,000 K at 1552:05 UT, a peak volume emission measure of 7 x 10 to the 48th per cu cm at 1553:25 UT, and a peak value of thermal energy content of 2 x 10 to the 16th evgs/cm to the 3/2 power at 1552:45 UT were derived. Based on the analysis of spatially-resolved X-ray images during the period near flare-peak through flare-decay, the flare is observed to be both intense and compact and to consist of at least two identifiable loops whose volumes remained essentially unchanged throughout the event.

Wilson, R. M.↗
NASA NTRS1980

Spectrum synthesis of EUV solar flare line profiles

A classic double ribbon flare of importance 1B occurred at approximately 1405 UT on June 15, 1973, reached an H alpha maximum at 1413 UT, and ended at 1455 UT. The flare occurred in an old and simplifying bipolar region at N18 W32. This flare was studied due to the extensive temporal data available. A total of 136 spectra of wavelength ranges from 1100 to 3000 A were taken during the flare's duration by the Naval Research Laboratory normal incidence slit spectrograph. Using this data the nature of the solar chromosphere of a flare event as a function of time was determined.

Tripp, D. A.↗
NASA NTRS1980

Observations of the Crab Nebula, NGC 4151, Cyg X1 and Cyg X3 at medium gamma ray energies

The paper analyzes observations of the Crab Nebula, NGC 4151, Cyg X1, and Cyg X3 taken with the UCR gamma ray telescope at a residual atmospheric depth of about 3.5 g/sq cm on a balloon launched from Palestine, Texas, 4.5 GV, 2000 local time LT (0100 UT), on September 29, 1978. The data consists of continuous observations from 0430 LT (0930 UT) on September 30 to 1800 LT (2300 UT) on October 1, 1979. A flux increase is observed at the right ascension of the Crab Nebula within about a 10 min uncertainty of telescope source position determination, eliminating the SAS-2, CG 195+4, and the two COS-B sources in the antigalactic center direction as the origin of the gamma rays. The total flux of gamma rays for the Crab Nebula from 1.2 to 10 MeV is (6.1 + or - 1.5) x 10 to the -3rd photons/sq cm-s, with an upper limit at 10-20 MeV of 7 x 10 to the -5th photons/sq cm-s. Results for the NGC 4151, Cyg X1, and Cyg X3 are also discussed and flux upper limits are given.

Zanrosso, E. M.↗
NASA NTRS1982

Observation and modeling of energetic particles at synchronous orbit on July 29, 1977

In the 12 hours immediately after a worldwide storm sudden commencement at 0027 UT on July 29, there was a series of at least four magnetospheric substorms, the last and largest of which exhibited an expansion phase onset at approximately 1200 UT. Data from six spacecraft in three general local time groupings (0300, 0700, and 1300 LT) are examined, and vector magnetic field data and energetic electron and ion data from approximately 15 keV to more than 2MeV are employed. Four primary types of studies are carried out: (1) timing and morphology of energetic particle injections; (2) variation of particle phase space densities, using local magnetic field and particle flux data; (3) measurement of boundary motions, using high-energy ion gradient anisotropies; and (4) adiabatic modeling, which included injection, large-scale convection, corotation, and gradient drifts. For the 1200 UT substorms, it is concluded that there was a substantial flux dropout in a broad sector near local midnight because of a large-scale boundary motion, followed by a recovery to a predropout configuration.

Baker, D. N.↗
NASA NTRS1982

The observation of a coronal transient directed at earth

The paper reports the observation of a large coronal transient that can only be interpreted as a three-dimensional structure. Its form is one which has not been observed before: a gradually expanding, sun-centered disk of excess brightness, whose projected radius increased from 4 to 8 solar radii during 0832-0958 UT on November 27, 1979. This earth-directed transient was the source of an interplanetary shock wave that reached ISEE 3 at 0649 UT, November 30, and earth at 0738 UT, November 30. Fitting the shock speed at ISEE 3 and the average transit speed from the sun to ISEE 3 to a power law of the form V = (V sub 0)(r exp -n), it is found that V sub 0 = 1980 km/s and n = 0.294, in good agreement with shock wave models. The shock speed predicted by the power law at 10 solar radii is 1000 km/s, in good agreement with the estimated frontal speed of the transient.

Howard, R. A.↗
NASA NTRS1985

Injection of energetic particles following the gamma-ray flares on June 7, 1980, as observed on Helios 1

On June 7, 1980, two flares with impulsive gamma-ray emission were observed at 0117 Ut and 0312 UT. Measurements of the University of Kiel cosmic-ray experiment on HELIOS-1 are presented. The first approx. 0.5 MeV electrons escaped from the Sun to interplanetary space simultaneously with the hard X-ray burst. For the 0312 UT flare the protons and alpha-particle in the 3 - 20 MeV/nucleon range were injected from the Sun with a delay of approx. 40 min, followed by two subsequent new emissions.

Neustock, H. H.↗
NASA NTRS1985

Electric fields in the plasma sheet and plasma sheet boundary layer

Results obtained by Forbes et al. (1981) on the basis of time delay measurements between ISEE 1 and ISEE 2 imply that the plasma flow and the boundary contracting velocity were nearly the same, whereas the expanding boundary velocity was not accompanied by any significant plasma sheet plasma motion. In the present study, this observation is discussed in conjunction with electric field data. The study is based on electric field data from the spherical double probe experiment on ISEE 1. Electric field data from GEOS 2 are used to some extent to monitor the electric fields near the geostationary orbit during the considered eve nts. Electric field data during CDAW 6 events are discussed, taking into account positions of ISEE 1/ISEE 2 and GEOS 2; March 22, 0600-1300 UT; and March 22, UT; and March 31, 1400-2400 UT.

Pedersen, A.↗
NASA NTRS1985

Suprathermal O(+) and H(+) ion behavior during the March 22, 1979 (CDAW 6), substorms

The present investigation has the objective to report on the behavior of energetic (approximately 130 keV) O(+) ions in the earth's plasma sheet, taking into account observations by the ISEE 1 spacecraft during a magnetically active time interval encompassing two major substorms on March 22, 1979. Attention is also given to suprathermal H(+) and He(++) ions. ISEE 1 plasma sheet observations of the proton and alpha particle phase space densities as a function of energy per charge during the time interval 0933-1000 UT on March 22, 1979 are considered along with the proton phase space density versus energy in the energy interval approximately 10 to 70 keV for the selected time periods 0933-1000 UT (presubstorm) and 1230-1243 UT (recovery phase) during the 1055 substorm on March 22, 1979. A table listing the proton energy density for presubstorm and recovery periods is also provided.

Ipavich, F. M.↗
NASA NTRS1986

UT/longitudinal variations of composition in DE data

Composition data obtained by the quadrupole mass spectrometer (NACS) carried aboard the DE-B satellite were examined for variations in the polar regions during magnetically quiet conditions. The corresponding predictions of the MSIS-83 model are often used for comparison. The MSIS-83 model is used to emphasize the variations of interest by suppressing all other variations. A persistent enhancement of N2 density and a depletion of He density are present in the vicinity of the magnetic poles with maximum density response in the morning hours (magnetic) on average. A universal time (UT) variation in average density levels is evident near both the geographic and magnetic poles. There are systematic morphology changes with UT and between summer and winter which are qualitatively consistent with the simple concept that thermospheric heating effects are shifted or spread in the downwind direction of the global circulation systems driven by EUV and magnetospheric sources. The magnitude of the UT variations is larger in the southern hemisphere and is larger in local winter than summer.

Hedlin, A. E.↗
NASA NTRS1986

Compact, variable, moving sources observed on the sun at 2 centimeters wavelength

The Very Large Array (VLA) was used to observe the active region AT 4508 in the C-configuration between 1530 and 2330 UT on June 4, 1984. The position of this region was N06 E57 at 1300 UT on this day. Followup observations were made between 1500 and 2300 UT on January 17, 1986 in the D-configuration. Observations were compared with Mt. Wilson magnetograms. Results are discussed.

Lang, Kenneth R.↗
NASA NTRS1989

Middle atmosphere measurements of small-scale electron density irregularities and ion properties during the MAC/Epsilon campaign

Rocket payloads designed to measure small scale electron density irregularities and ion properties in the middle atmosphere were flown with each of the three main salvos of the MAC/Epsilon campaign conducted at the Andoya Rocket Range, Norway, during October to November 1987. Fixed bias, hemispheric nose tip probes measured small scale electron density irregularities, indicative of neutral air turbulence, during the rocket's ascent; and subsequently, parachute-borne Gerdien condensers measured the region's polar electrical conductivity, ion mobility and density. One rocket was launched during daylight (October 15, 1052:20 UT), and the other two launches occurred at night (October 21, 2134 UT: November 12, 0021:40 UT) under moderately disturbed conditions which enhanced the detection and measurement of turbulence structures. A preliminary analysis of the real time data displays indicates the presence of small scale electron density irregularities in the altitude range of 60 to 90 km. Ongoing data reduction will determine turbulence parameters and also the region's electrical properties below 90 km.

Blood, S. P.↗