Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Truncated distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A Multipole Expansion Method for Analyzing Lightning Field Changes

Changes in the surface electric field are frequently used to infer the locations and magnitudes of lightning-caused changes in thundercloud charge distributions. The traditional procedure is to assume that the charges that are effectively deposited by the flash can be modeled either as a single point charge (the Q model) or a point dipole (the P model). The Q model has four unknown parameters and provides a good description of many cloud-to-ground (CG) flashes. The P model has six unknown parameters and describes many intracloud (IC) discharges. In this paper we introduce a new analysis method that assumes that the change in the cloud charge can be described by a truncated multipole expansion, i.e., there are both monopole and dipole terms in the unknown source distribution, and both terms are applied simultaneously. This method can be used to analyze CG flashes that are accompanied by large changes in the cloud dipole moment and complex IC discharges. If there is enough information content in the measurements, the model can also be generalized to include quadrupole and higher order terms. The parameters of the charge moments are determined using a dme-dimensional grid search in combination with a linear inversion, and because of this, local minima in the error function and the associated solution ambiguities are avoided. The multipole method has been tested on computer-simulated sources and on natural lightning at the NASA Kennedy Space Center and U.S. Air Force Eastern Range.

Koshak, William J.↗
NASA NTRS1989

Application of a self-adaptive grid method to complex flows

A directional-split, modular, user-friendly grid point distribution code is applied to several test problems. The code is self-adaptive in the sense that grid point spacing is determined by user-specified constants denoting maximum and minimum grid spacings and constants relating the relative influence of smoothness and orthogonality. Estimates of truncation error, in terms of flow-field gradients and/or geometric features, are used to determine the point distribution. Points are redistributed along grid lines in a specified direction in an elliptic manner over a user-specified subdomain, while orthogonality and smoothness are controlled in a parabolic (marching) manner in the remaining directions. Multidirectional adaption is achieved by sequential application of the method in each coordinate direction. The flow-field solution is redistributed onto the newly distributed grid points after each unidirectional adaption by a simple one-dimensional interpolation scheme. For time-accurate schemes such interpolation is not necessary and time-dependent metrics are carried in the fluid dynamic equations to account for grid movement.

Deiwert, G. S.↗
NASA NTRS1998

A Multipole Expansion Method for Analyzing Lightning Field Changes

Changes in the surface electric field are frequently used to infer the locations and magnitudes of lightning-caused changes in thundercloud charge distributions. The traditional procedure is to assume that the charges that are effectively deposited by the flash can be modeled either as a single point charge (the Q-model) or a point dipole (the P-model). The Q-model has 4 unknown parameters and provides a good description of many cloud-to-ground (CG) flashes. The P-model has 6 unknown parameters and describes many intracloud (IC) discharges. In this paper, we introduce a new analysis method that assumes that the change in the cloud charge can be described by a truncated multipole expansion, i.e., there are both monopole and dipole terms in the unknown source distribution, and both terms are applied simultaneously. This method can be used to analyze CG flashes that are accompanied by large changes in the cloud dipole moment and complex IC discharges. If there is enough information content in the measurements, the model can also be generalized to include quadrupole and higher order terms. The parameters of the charge moments are determined using a 3-dimensional grid search in combination with a linear inversion, and because of this, local minima in the error function and the associated solution ambiguities are avoided. The multipole method has been tested on computer simulated sources and on natural lightning at the NASA Kennedy Space Center and USAF Eastern Range.

Koshak, William J.↗
NASA NTRS1969

Design and sparing techniques to meet specified performance life

Specified performance life technique starts with the general description of what is wanted, defines in block diagram the operational needs, and then defines the functional systems required. The technique is similar to a truncated reliability model, but the calculation is simplified by use of a Poisson distribution approach to failure probability.

Holstead, A. J., Jr.↗
NASA NTRS1985

The model-independence of cosmic ray source determinations

The direct inversion method of Margolis is used to explore the dependence of Z less than or equal to 28 source abundance determinations on the choice of the pathlength distribution. The source abundances do not depend strongly on the form of the truncation used, although some truncation at the lower energies (compared to a leaky box) is necessary. The decrease of mean grammage with increasing energy is required by the observations. The effects of errors and he use of other secondary to primary ratios is discussed.

Margolis, S. H.↗
NASA NTRS1972

The effects of estimation of censoring, truncation, transformation and partial data vectors

The purpose of this research was to attack statistical problems concerning the estimation of distributions for purposes of predicting and measuring assembly performance as it appears in biological and physical situations. Various statistical procedures were proposed to attack problems of this sort, that is, to produce the statistical distributions of the outcomes of biological and physical situations which, employ characteristics measured on constituent parts. The techniques are described.

Hartley, H. O.↗
NASA NTRS1979

Optimal nodal point distribution for improved accuracy in computational fluid dynamics

In applying finite-difference techniques to flow field problems, the accuracy attained for a fixed number of node points can be improved using unequally-spaced node points. The distribution of these node points is chosen here by minimizing a measure of local truncation error with respect to the parameters which define a transformation between the computational space of equally-spaced node points and the physical space of unequally-spaced node points. The problem then becomes a nonlinear programming problem. Numerical results are presented for two one-dimensional test problems: the Blasius boundary layer problem and the inviscid Burgers' equation.

Pierson, B. L.↗
NASA NTRS2015

Study of Static Microchannel Plate Saturation Effects for the Fast Plasma Investigation Dual Electron Spectrometers on NASA's Magnetospheric MultiScale Mission

Imaging detecting systems based on microchannel plates (MCPs) are the most common for low energy plasma measurements for both space borne and ground applications. One of the key parameters of these detection systems is the dynamic range of the MCP's response to the input fluxes of charged particles. For most applications the dynamic range of the linear response should be as wide as possible. This is especially true for the Dual Electron Spectrometers (DESs) of the Fast Plasma Investigation (FPI) on NASA's Magnetospheric MultiScale (MMS) mission because a wide range of input fluxes are expected. To make use of the full available dynamic range, it is important to understand the MCP response behavior beyond the linear regime where the MCPs start to saturate. We have performed extensive studies of this during the characterization and calibration of the DES instruments and have identified several saturation effects of the detection system. The MCP itself exhibits saturation when the channels lack the ability to replenish charge sufficiently rapidly. It is found and will be shown that the ground system can significantly impact the correct measurement of this effect. As the MCP starts to saturate, the resulting pulse height distribution (PHD) changes shape and location (with less pulse height values), which leads to truncation of the PHD by the threshold set on the detection system discriminator. Finally, the detection system pulse amplifier exhibits saturation as the input flux drives pulse rates greater than its linear response speed. All of these effects effectively change the dead time of the overall detection system and as a result can affect the quality and interpretation of the flight data. We present results of detection system saturation effects and their interaction with special emphasis on the MCP related effects.

detecting system↗
NASA NTRS1973

Equilibrium properties of a one-dimensional kinetic system.

One-dimensional systems of N = 500 and 250 particles in equilibrium are numerically simulated utilizing the method of molecular dynamics. Periodic boundary conditions are imposed. The classical two-body interaction potential is short range, repulsive and has a corresponding finite force. The equations of state are determined for densities both less and greater than one. Corresponding theoretical isochores are determined from models based on nearest-neighbor interactions and on a truncated virial expansion, and a comparison is made with the experimental isochores. Time independent radial distributions are constructed numerically and discussed. A change of state from a solidlike state to a fluid-gas state based on the penetrability of the particles is predicted. The transition temperatures are estimated from the radial distribution functions and the nearest-neighbor model. Self-diffusion is observed and the corresponding constants are determined from the velocity autocorrelation functions.

Williams, J. H.↗
NASA NTRS1982

An optimization technique for lumped-distributed two ports

A frequency domain direct efficient analysis and an optimization technique of a large class of lumped-distributed networks containing active elements are presented. Sensitivity and Hessian matrix calculations are performed using truncated Taylor series expansion of two-port parameters of subnetworks. An interactive computer program was developed to demonstrate the application of the method. Examples of network optimizations are included to illustrate the powerfulness of the technique.

Iobst, K. W.↗
NASA NTRS1986

Flyby - Numerical experiments on a galaxy orbiting within a galaxy cluster

Dynamical effects on a self-consistent stellar system in orbit around an attracting force center have been studied by means of numerical experiments. Globular clusters in the Galaxy, galaxies within a cluster, and dwarf spheroidal galaxies in orbit around our Galaxy are examples of this dynamical problem. Stars within the galaxy move in the combined self-consistent and external (cluster) force fields, in an accelerated frame, and the galaxy orbit is integrated at the same time. The principal result found is that, in practice, a spherical galaxy either suffers little mass loss (less than 1 percent) or is totally disrupted. A disruption criterion based on the ratio of tidal stress to internal stress within the galaxy describes the results succinctly. This criterion is used to discuss the distribution of dark mass in galaxy clusters. A galaxy envelope expands, rather than being tidally truncated, following a flyby. Spiral galaxies can show tidal damage after flying past the cluster center, even without a close encounter with another galaxy.

Miller, R. H.↗
NASA NTRS1989

Modal representations in control/structure interaction

When control/structure interaction problems are examined, a standard method for representing the structure is to choose a truncated set of normal modes calculated from either a finite-element or a distributed-parameter model. However, the normal modes can neglect important static information about the structure. Using a set of fixed interface modes results in a much more accurate closed-loop model, even when relatively low-bandwidth controllers are used. The fixed interface modes are calculated with control input degrees of freedom held fixed, and standard finite-element software can be used. Illustrative examples include a simple hinged beam and a complex model of the phase-I Space Station configuration.

Blelloch, Paul A.↗
NASA NTRS1990

Development of load-dependent Ritz vector method for structural dynamic analysis of large space structures

The development and preliminary assessment of a method for dynamic structural analysis based on load-dependent Ritz vectors are presented. The vector basis is orthogonalized with respect to the mass and structural stiffness in order that the equations of motion can be uncoupled and efficient analysis of large space structure performed. A series of computer programs was developed based on the algorithm for generating the orthogonal load-dependent Ritz vectors. Transient dynamic analysis performed on the Space Station Freedom using the software was found to provide solutions that require a smaller number of vectors than the modal analysis method. Error norm based on the participation of the mass distribution of the structure and spatial distribution of structural loading, respectively, were developed in order to provide an indication of vector truncation. These norms are computed before the transient analysis is performed. An assessment of these norms through a convergence study of the structural response was performed. The results from this assessment indicate that the error norms can provide a means of judging the quality of the vector basis and accuracy of the transient dynamic solution.

Ricles, James M.↗
NASA NTRS1978

Three-dimensional magnetohydrodynamic turbulence in cylindrical geometry

A theory is developed in which a perfectly conducting cylindrical wall is used to describe incompressible MHD turbulence. Dynamic equations of incompressible MHD and its associated fields are expanded in a system of vector eigenfunctions of the curl. The total energy, magnetic helicity, and cross helicity have simple quadratic expressions in the expansion coefficients. The invariants are temporally constant for a truncation at a large, but finite, number of coefficients. The invariants are used to construct canonical distributions. It is noted that for all initial conditions, including quiescent ones, the mean-square velocity fields have finite values. The stability problem is transformed into a search for values of the integral variants which minimize the mean-square velocity fields. This leads to an extremal helicity principle.

Montgomery, D.↗
NASA NTRS1979

Multi-level adaptive computations in fluid dynamics

The multi-level adaptive technique (MLAT) is a general strategy of solving continuous problems by cycling between coarser and finer levels of discretization. It provides very fast solvers together with adaptive, nearly optimal discretization schemes to general boundary-value problems in general domains. Here the state of the art is surveyed, emphasizing steady-state fluid dynamics applications, from slow viscous flows to transonic ones. Various new techniques are briefly discussed, including distributive relaxation schemes, the treatment of evolution problems, the combined use of upstream and central differencing, local truncation extrapolations, and other 'super-solver' techniques.

Brandt, A.↗
NASA NTRS1972

Geopotential representation with sampling functions.

Satellite-to-ocean altitudes measured to meter accuracy eventually can yield a geoid representation with significant short-wavelength structure over ocean areas. To cope conveniently with this expected detail, one suggested analytical technique would represent the geopotential or the geoid as an expansion in sampling functions that are linear combinations of spherical harmonics. Each of the sampling functions makes its principal contribution to the geopotential in a single geographical region. For a representation truncated after degree N, there are (N + 1) squared such functions associated with a like number of points distributed nearly regularly on the globe. The features of this geopotential representation can be illustrated by considering the case N = 22, for which an expansion in sampling functions can be produced that is equivalent to the geopotential of the 1969 Smithsonian standard earth.

Lundquist, C. A.↗
NASA NTRS1985

Separation of core and crustal magnetic field sources

Fluid motions in the electrically conducting core and magnetized crustal rocks are the two major sources of the magnetic field observed on or slightly above the Earth's surface. The exact separation of these two contributions is not possible without imposing a priori assumptions about the internal source distribution. Nonetheless models like these were developed for hundreds of years Gauss' method, least squares analysis with a truncated spherical harmonic expansion was the method of choice for more than 100 years although he did not address separation of core and crustal sources, but rather internal versus external ones. Using some arbitrary criterion for appropriate truncation level, we now extrapolate downward core field models through the (approximately) insulating mantle. Unfortunately our view can change dramatically depending on the degree of truncation for describing core sources.

Shure, L.↗
NASA NTRS1997

A Three-Wave Model of the Stratosphere with Coupled Dynamics, Radiation and Photochemistry

A zonal mean chemistry transport model (2-D CTM) coupled with a semi-spectral dynamical model is used to simulate the distributions of trace gases in the present day atmosphere. The zonal-mean and eddy equations for the velocity and the geopotential height are solved in the semi-spectral dynamical model. The residual mean circulation is derived from these dynamical variables and used to advect the chemical species in the 2- D CTM. Based on a linearized wave transport equation, the eddy diffusion coefficients for chemical tracers are expressed in terms of the amplitude, frequency and growth rate of dynamical waves; local chemical loss rates; and a time constant parameterizing small scale mixing. The contributions to eddy flux are from the time varying wave amplitude (transient eddy), chemical reactions (chemical eddy) and small scale mixing. In spite of the high truncation in the dynamical module (only three longest waves are resolved), the model has simulated many observed characteristics of stratospheric dynamics and distribution of chemical species including ozone. Compared with the values commonly used in 2-D CTMs, the eddy diffusion coefficients for chemical species calculated in this model are smaller, especially in the subtropics. It is also found that the chemical eddy diffusion has only a small effects in determining the distribution of most slow species, including ozone in the stratosphere.

Shia, Run-Lie↗